License: License change? Watermark

Similar Questions

• vMotion Licensing change 4.0 to 4.1

  Currently I have 4.0U1 vCenter server and a cluster of hosts running on ESX 4.0U1 std. I am trying to understand my best script to upgrade to 4.1 and wondered where exactly this change in the license for vMotion takes place, either during the upgrade to vCenter, upgrades of the host or both.

  Ideally I could upgrade vCenter 4.1 and then vMotion VM off the coast and hosts one by one, but I wasn't sure how the license change takes place to allow of vMotion. If someone could offer some advice on this I would appreciate it!

  Thank you!

  Interesting question.

  According to a post on the German forum (about Essentials more), vMotion will be available after the update of the host.

  André

• Gen license changes

  Received a notice that could change License Gen

  The following changes will be made to the HTTP POST parameters:

  ·         The device PIN is sent in format HEX, rather than decimal places

  ·         Versions will be sent in the same format displayed on the application (1.0.0.0), instead of the previously sent decimal representation

  can't say for sure but seems that this change is not reflected in the test presentation AppWorld. Can anyone confirm that the change has gone through?

  Hatt,

  Yes, the change went through.  The change has no impact the memory test because the presentation test worked how the actual process should have worked throughout.  Now, they are synchronized.

• VCenter eval Operations Management Suite License change

  I'm trying the product eval, which is great BTW, but I want to know if it is away from changing the license for the eval for anything other than "the company."  I'm assuming that the eval is the full licensed version, but realistically we will buy something less.  Is there a way to change the eval to reflect the 'Foundation', 'Standard' or 'Advanced '?  I would like to see the product with the limited functionality because it is difficult to determine what are the options in which version.  Thank you.

  Hello dla123,

  Just to make sure we're all on the same page, be aware that product edition names change in version 5.6... When 5.6 released, I'll try and remember to update this message/thread with the mapping between these product editions.

  I write this, because you're talking about the Foundation, which is NOT available for 5.0.  The Foundation provides access to the Victoria Cross analytical performance Ops only, no capacity planning.  As far as I know, no license is required, but you will need to run vSphere 5.1.  Just install the VAPP, register with vCenter and you'll be good to go.

  Standard/advanced/enterprise suites include all the features of the vC to vSphere UI Ops - there is no difference.  The main difference for vC Ops Advanced/Enterprise is that you will have access to the custom user interface that offers the possibility to build dashboards that incorporate third-party adapters as well as some cards of products VMware (like Hyperic and vCD).  Standard does not provide this functionality.

  So, the short answer... to see the differences in the features of the product that you need to wait up to 5.6 is GA so you can watch Foundation (no permit required).  Otherwise, all versions of 5.6 have the same functionality in the user interface of vSphere.

• License change

  Can I change a unopened program American CS6 Expert + (Windows) license in a German license?

  I have the American version of IE not knowing not whether a German language installation will be possible also.

  The product is new, unopened - not used.

  Thanks for a hint

  Hi, Shigatse, please contact our support chat. This is a user to user forum, and you will not be able to get help for this question here.

• You can use if original license change the hard drive on Windows 7?

  Hello, I currently have Win7 installed on my laptop. The hard drive is fried, so I need to switch to a new. Once I pass on the hard drive, I'll be able to re - install Win7 using my original license? This is the same computer just with upgraded hardware. Thank you.

  Hello, I currently have Win7 installed on my laptop. The hard drive is fried, so I need to switch to a new. Once I pass on the hard drive, I'll be able to re - install Win7 using my original license? This is the same computer just with upgraded hardware. Thank you.

  As long as you have the installation media and product key - Yes.

• Watermark remains despite the license

  I bought a picture HAVE - I need to save it in Jpeg format.  I did, but he still has the watermark on it.  How to save it as a j - peg without the watermark?

  Go to your license history.

  Click on the image to go to the image details page.

  Use the download link Office

  The watermark displays when viewing in a browser. Use of the link Desktop download, the downloaded version will be free if a license of watermark.

• Permanent license SSL_VPN

  Hello

  We bought a SSL_VPN license to use on a 1921.
  The installation went as usual, but the active license is always the evaluation license.

  Is there a way to activate the permanent license? I already rebooted the device.
  I am familiar with the command 'license c1900 technology-Starter package', but I don't think that this applies to licensed SSL_VPN.

  Here is a part of the output "retail license sh:
  Index: 1 device: SSL_VPN Version: 1.0
  License type: EvalRightToUse
  The license status: Active, in use
  The total period of assessment: 8 weeks 4 days
  Assessment left period: 6 weeks 2 days
  Used period: 2 weeks 1 day
  Transition date: 30 November 2014 12:11:05
  Number of licenses: 75/0 (in-use/Violation)
  License priority: high
  Store the Index: 2
  Store name: built-in license storage
  Index: 2 function: SSL_VPN Version: 1.0
  License type: Permanent
  The license status: inactive
  Number of licenses: 25/0/0 (active/in-use/Violation)
  License priority: medium
  Store the Index: 2
  Store name: primary storage license

  Kind regards
  Roel

  To activate the permanent license at the expiration of the evaluation license.

  If you really want to change the priority before then, you can use "license change low priority SSL_VPN" at the command prompt preferred to reduce the priority of low evaluation license, making it the active permanent license.

• Update license key OEM for vmware fusion

  I'm moving from a windows7 (64-bit Home Premium) to a Mac Book. I want to import my old PC as a virtual machine using VMware fusion.

  I am trying to determine what is necessary from the point of view license.

  The original license is OEM so I think that it may have an update - is just a case of getting a new license key?

  I tried the update by using the update at any time of mechanism, but this no longer works

  How can I get the appropriate license change to allow me to get the installed virtual machine?

  Thank you!

  Hello

  Thank you for your reply and sorry for the late reply.

  You can follow the procedure referred to in article of VMware Fusion below to migrate your system of operating existing for Windows 7 to your new MacBook.

  Migrate a physical PC existing to a Virtual Machine.

  http://pubs.VMware.com/Fusion-4/index.jsp?topic=/com.VMware.fusion.help.doc/GUID-51A50557-6473-4053-81EC-9ACB40300FBD.html

  After that, get Windows 7 successfully migrated you will need to purchase a new license Windows 7 key (rightly underlined André Da Costa, OEM licenses are linked to all first computer, you install and activate Windows on).

  You need to activate your migration to Windows 7 operating system with the new license key.

  You don't need to reinstall Windows 7 when you migrate your operating system on a new computer through VMware.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful. Please answer for any further assistance.

• License (KITS)

  can I use vmware essential kit (RBO) in my data center?

  RBO (retail branch).

  This kit comes with min 10 sites and 3 guests in a site.

  any comment about this can. is it a good idea to buy a kit essential instead to purchase the license of the separate business.

  If I have about 100 processors on my hosts, so I buy only 3 sites.

  Virtual Center I can buy a separate standard license.

  What are the differences between license kit and RBO company?

  Is it achievable?

  VMware has recently changed for the Remote Office Branch Office license vSphere editions. Please take a look at VMware vSphere Editions and comparison Kits for licensing changes.

  André

• ESXi 4.1 VM trial does not accept a license

  Hello, can someone please enlighten us what we're doing wrong?

  We downloaded a demo version of ESXi 4.1 (I apologize if the version is not corect), installed and the console says "evaluation for 60 days. We have registered online and our vmware considering appear under license from the license numbers required...

  , but how can we change this "evaluation period" on the console vmware itself? We cannot find anything on the menu that could connect to our account, we assign or code license... and Yes. We're basically stuck and not sure what will happen after 60 days.

  can someone give us a clue, please?

  Thank you very much in advance, Pavel

  When you logged into your account with the link you provided http://www.vmware.com/products/vsphere-hypervisor/overview.html you should see a download license information screen.  In this screen, you will see a key.  This key will be your key not expiring.  Inject this key into your ESXi host (Configuration - features licensed - change.

• ESX LICENSE

  I'll to demote an old ESX Server and then add a newer version in its place. What is the eaisest way to remove the old server ESX cluster so that the license it has currently allocated is returned and is available to be reallocated to ESX server latest?

  Thank you

  If you wish to no longer use this host that you want to revoke his license, first migrate all VM on one or several hosts, put it in maintenance mode, go to the Configuration of the host tab, then features under license, change of the source of the evaluation license, then delete your instance of vCenter.  All licences should be returned to the pool

  In addition, check your ESX Server Edition, you can also change the to without license.

  who should do well enough.

• I need to sell an old brand cpu/mobo with XP home can it be re-written by someone else? If this rite throw on that one please?

  Hello to all who read this and you can contibute. My dilemma is, Windows XP Home Ed can be used by someone other than me when its locked to a certain CPU/motherboard? And it can be recorded/re-recorded to someone else than me? If I sold it, and they used the same CPU/MoBo but different hard drive? I have all the recovery discs w/windows and all apps on them. Processor is an Intel P4 2.53, MoBo has these # s above, P4-S533-VX, and it is a Sony Vaio desk end 2002 (yes I know it's old). Just some FYI. I really need to make a little money now that Christmas is around the corner & sell this thing as soon as POSSIBLE! Anyway any help would be GREATLY appreciated!

  Registration is optional and has no real meaning.
  If you sell your PC and all the recovery disks, while the buyer is the owner of the license
  Change / pose a new hard drive has no impact on license

• 10.5 connect integration with Office 365 unit in support of voicemail to email

  Using the document attached, I try to integrate the connection of the unit with Office 365 and have managed to query domain names and its fine to resolve, however, I get the error below the my user account on the server of connection of the unit, which seem to be linked to "Appropriate permissions not granted to the service account or to the mailbox Exchange uninitialized" see screenshot below.

  
  My Questions are

  (1) in Office 365 under Exchange settings / users in my phone and unified messaging features voice account is currently disabled, this feature is active for the UM with the connection of the unit to operate? See screenshot below.

  (2) also when I discovered active users / user account / product licenses my plan online Exchange is off, what I have to buy this feature for Unified Messaging work? See screenshot below

  3)the big question is do I need to either or both of these features in a permitted in support of unified unity connection messaging? Or is their anyway, I can assure this works without having to purchase the license? IE demo/trial licenses etc.

  Thank you!

  Unity Server user connection account error under unified messaging setting.

  

  Office 365 Unified messaging currently disabled

  

  Online map license changes not bought

  

  Of the test failed, it captures screen appears that you have may not properly set the permissions of the account. I read it again and make sure that the password is not set for the required change, etc.

• What can I downgrade AIP-SSM-10 of 2.0000 E4 to 2.0000 E3?

  Hello

  I have an AIP-SSM-10 (IPS - K9 - 6.1 - 2 - E3) running inside an ASA (active failover mode / standby).

  My license status is 'not expired until 12,2010."

  When I switch to 2.0000 E4 (because he said I needed engine E4 to the signature update) my license changed to expired.

  Here's my question, what are the versions can I go to?

  I made a mistake? Can I go down to 2.0000 E3 and how?

  Thank you

  Try to remove the license from first service account, and then update the license via cisco.com:

  (1) create a user with the service account name: service of privilege for the user name password

  (2) then SSH to the IP addresses with the service account user name and password created earlier.

  Then by following the steps below:

  'su' to root (same as svc acct PW PW)
  -Remove all the files in the/usr/cids/idsRoot/shared/directory, * EXCEPT host.conf file *.
  -run "/etc/init.d/cids restart" to restart the IPS apps (or reset the sensor)

  (3) from IDM - apply the real license by choosing to update the license via cisco.com.

  Hope that solves this problem.