License pooling in SRST mode?

Similar Questions

• Create different conversion rules in SRST mode

  Hello world

  Have you ever tried to create rules of different translations for 'normal behaviour' and 'Behaviour SRST'?

  This is my problem:

  In my company, we use waiting them console ARC for the reception, so on my H.323 gateway, I have the following translation-rule:

  translation of the voice-rule 1

  rule 1 / ^ $/ /850/ (because the provider sends just the extension is empty when you call the reception)

  The 850 leads to a CTI route point in CUCM, then the call goes to the CRA can.

  But when the CUCM is broken and phones of failover mode SRST, reception is not available in addition to the outside, because routing CTI 850 is no more accessible. Thus, when SRST mode, I stand at the door of entry use this translation:

  rule 1 / ^ $/ /500/

  so that calls to the home go to the actual DN of the receiving phone.

  It is a kind of a conditional routing... (if mode normal, like this, but in SRST translate, translate like that...)

  Have you guys tried to do something like that?

  I've heard of conversion rules of voice in SRST mode (in call-manager-backup mode), but it doesn't seem to work...

  Good day

  Rémi

  Use the command alias under SRST.

  Chris

  Sent by Cisco Support technique iPhone App

• Floating pool with Persona mode

  Hi all

  I have a floating pool and you have configured the persona mode. Everything works well except for the credentials Windows Manager does not record its inputs. Whenever a user gets a new virtual machine assigned, credentials Windows is empty.

  No idea why this is happening and how this can be solved?

  Thank you

  Check out this KB.

  http://KB.VMware.com/kb/2052573

• VMware hypervisor 5 license returns to the mode of assessment on reboot

  I have a current execution machine hypervisor and I installed the license via the vmware vsphere client, configuration tab and it shows under license. I can view the logs of system on the host itself and see that the license is installed under display support information.

  The question is when I turned off the hypervisor, rear power on the server returns to the mode of assessment and I lose my vm. I then have to recreate the virtual machine and under Select a disk, use a previously configured disk.

  What happens in the devil, I am doing wrong?

  I would like to do a reinstall of ESXi.  There is something wrong with the installation because /altbootbank is not mounted.

• Hello! Can I use a license on different PC mode not at the same time?

  I would like to you use PS on two different computers at different times: I may have?

  Yes, your license allows you to have two machines with active installations.  As long as you do not use the license on both machines at the same time you comply with the terms of this license.

• SRST with + E164, sign + num - exp works only with

  Hello

  We'are deployment CUCM8.6.2 with + E164 dialplan and multiple gateways SRST. We are in version IOS T. 15.2 (3)

  Phones get properly registered with their full + E164 extension during the transition to the SRST mode but we would like to implement for inter site composition as in CUCM jacquard translation of 4 digits.

  We tried the num - exp command:

  NUM - exp 3... + 04100013...

  but in the command "Display the number of dial plan", we can see that the + sign is stripped and the prefix not as you wish.

  We tried to escape the character and so one...

  but nothing works!

  Thank you for your

  Help

  Kind regards

  Christophe

  The way I did is to apply a transformation on the ephone-dn model profile or call-manager-rescue as well as the inbound POTS dial-peer. This has the advantage of consuming less dial-peers similar to how CUCM has only the real DN in E.164 format.

  http://www.Cisco.com/en/us/Tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#con10b

  Please remember useful frequency responses and identify useful or correct answers.

• Windows 7-three license user. 1 computer fails WGA - 2 pass!

  I bought a license update 3 reviews of Window 7 Ultimate from Amazon in Nov 09.  It has been installed sucsessfully on three computers and worked well since then. Last week, one of the computers booted up and began to give @you may be victim of software Couterfeit' warnings and fails the WGA to test.  Two other computers that also had continuous regular updates to spend.  I was not able to contact the seller through Amazon Market place. Looking carefully at the disc and support box etc, it seems that this drive was supposed to be an OEM system, as there is no COA with it (I don't know if 3 user license come with 3 modes of action) and the product key is xxxx. OEM... XXXX the middle of it.  After paying a meaningful of oney aount, I am at a loss what to do next. Can anyone help?  If it's wrong I'm more than happy to report it to help prevent what happens once again, but I need to solve this problem.  When I tried ringing Microsoft, represntative phone not even help as all he kept saying: ' you must buy genuie ' ust buy you genuine, which is exactly what I thought, I did...  Help!

  Unfortunately, your copy of Windows 7 Ultimate is a counterfeit.  This is a pirated version of an OEM copy, which includes an exploit to illegally bypass product activation.  I suggest that you contact the seller and ask for a 100% refund.

  For you non-genuine problem, you will need to purchase an authentic edition "full version" of Windows 7 for each computer and perform a "clean installation" complete.  You can acquire genuine Windows 7 from the Microsoft Store.

  BTW, there was never any version 3 legitimate user of Windows 7 Ultimate license.  Your seller apparently invented this story to get you to buy its fraudulent goods.

  Carey Frisch

• Cisco Telepresence Server/Cisco Telepresence driver/Cisco VCS - C / Cisco TMS license

  A big problem with the fact that I'm stuck is licensing. Really, I have tried many things to find the solution for it, but could not.

  I have actually made all of these servers (mentioned in the title) in my lab in preparation for the CCNP Collaboration certification at home.

  I am not able to complete some laboratories due to license issue (I guess). Y at - it an option to get the demo license for all these servers?

  I would be really greatfull if someone can suggest me the solution and/or the licenses required to complete all the stuff for my CCNP Collab tag.

  Best regards

  Dipak Singh

  TMS and VCS - C when installed without licenses, are automatically set mode of demonstration/test with some availability of license to test with. If needing a VCS-E, you will need to do to your account manager and they should be able to get you the time limited licenses good because I think that 90 days.

  Conductor Essentials is free, which means that you can install and get full functionality without the need of all licenses, but you are limited to 1 conference bridge and no grouping is allowed.

  TelePresence Server require licenses to function, once again, reaching out to your account manager for this.

  At the end of the day, you should reach to your account manager for all of this, as they should be able to help get timed license if you need.

• ISE HA / node licenses group

  I have a single ISE 3355 with 2200 basic licenses.

  I intend to buy an another 3355 for redundancy purposes.

  Just add this in the node group and the license pool is shared between the nodes? I can't imagine that I have to rebuy all licenses for the 2nd device.

  Thanks in advance.

  That is right.  There is not need to purchase licenses additional paks.  ISE deployment licenses are based by endpoint, not by the node of the ISE.  You can simply add the new node to the existing deployment.

  You have probably already seen this, but here's a guide for distributed deployments:

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-2/user_guide/ise_user_guide/ise_dis_deploy.html

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• IKEv2 VPN without using licensed SSL? (ASA-5512)

  Hi all

  I enabled Cisco 'Anyconnect Premium peers' for customer less connections vpn ssl, the obvious snag is that for Anyconnect ikev2 sessions he wants to use the SSL license pool instead of the IPSEC pool (which I have a lot of connection for 'peers VPN Total: 250' licenses.

  * Is it possible to configure Anyconnect to connect through IPSEC and use licensed IPSEC (while keeping Premium Anyconnect active peers)?

  * Should I consider 3rd third-party vpn outside Anyconnect clients?

  CyA

  Craig

  Remote access to sessions with IKEv2 will always consume a Premium license. Change for another customer will not help unless you change to a customer that uses the legacy technology with EasyVPN. But this should not be the solution.

  If you enable AnyConnect Essentials, you can use AnyConnect with IPSec the platform limit, but you cannot use the features award (as a clientless) more at the same time.

  In a situation like that where many AnyConnect-Sessions are necessary and only a couple of sessions without client, I installed AnyConnectEssentials on the ASA principal and deployed an another ASA only for VPN without client. Due to the high cost of premium VPN licenses, is much cheaper then buying the Premium licenses for all VPN users.

  Sent by Cisco Support technique iPad App

• CUE with SRST

  Hello

  I'm responsible for getting a series router 2900 in SRST mode on a remote site to a call manager centralized, but one of the requirements using a TRACKING module on the 2900 remote as the main voicemail and auto attendant for the site and not as a backup for the connection of the unit.  Is it still possible because the router will exercise a SRST router?

  Thank you

  All the answers have been evaluated.

  Look at this URL for more information about how to configure the integration of CUCM CUE and also SRST.

  http://www.Cisco.com/en/us/products/SW/voicesw/ps5520/products_configura...

  Be sure to note all the useful messages.

  Sent by Cisco Support technique iPhone App

• license of system of education

  Device education VIP license has been badly implemented as 'CC apps for education' rather than 'CC for education '. Now students connect with user name or serial number. I am assumming that it's because of the non implementation for education.  How can I go back and change the incorrect configuration?

  Purchased materials? A license pool is at your disposal?

  See

  Create packages with Adobe Creative cloud for education materials

• License server ESXi change

  Hello

  I use a PowerCLI script to configure my ESXi servers immediately after deployment. This includes adding them to vCenter Server. I use the ESXi image provided by HP and the image is already licensed with the license of the free hypervisor.

  This means that I can't add the ESXi server to vCenter as the license does not include the vpxa license.

  I don't want to open the vSphere Client directly to the ESXi server and change the license before running the configuration script PowerCLI.

  How can I change the license using PowerCLI license reconfigured to evaluation mode before adding the ESXi server to vCenter?

  Thank you

  / Magnus

  This should work for stand-alone esxi 5.0

  $lm = get - views - Id "LicenseManager-ha-license-manager.
  $lm. UpdateLicense ("00000-00000-00000-00000-00000", $null)

• Essential VMware more Licensing questions?

  Hi guys,.

  (1) I know for critical VMware is allowed up to 3 host Max and 192 GB / RAM. But what about vRAM pool if I don't use that 2 host, it will always allocate up to 192 GB of RAM?

  (2) if I use the Standard of Vsphere 5 license, I'll be only entitled 32 GB of vRAM for a license pool? Which means that if I buy a license 2, I have up to 64 GB of vRAM pool?

  (3) is the maximum amount of allocated to a VM 96 GB of VRAM? What happens if I have purchased 2 license of the company more. Willl be 1 TB?

  You're right, your entitlement would be 64 GB on each host.  And Yes, if you have only 1 host with a single CPU, then you would have 1 license and 32GB vRAM right.

• License requires

  Hello

  We need to have new ESX 3.5 (2 processors) to be included in our existing VI infrastructure that VC 2.5 & seven ESX 3.5 servers.

  We license configured server that has the license pool centrally manage license for all ESXs. My question is what type of license is required for this server to be part of the existing HA + Dr. configured in Server VC including vmotion & other features enabled.

  Is - this enterprise for ESX3.5 license which will include all under the characteristics:

  VMotion

  DRS + HA

  Update Manager

  VCB

  Consolidation

  Thanks, Vinod

  You can buy a license of the company.