license problem
Hi all
I have a problem today - I use a multipurpose for LabView license, I wanted to install LV on a different PC, but the installer tells me that my license is not a good license for LabView. You have the same problem?
Kind regards
Marcin
As I suspected, it was a problem with the servers OR today, everything works fine.
Kind regards
Marcin
Tags: NI Software
Similar Questions
-
Page layout in V11 license problem
Hello
I got a support request on an error with page layout in V11 license. The same project works very well in V10, but while trying to open in V11 layout options only are not enabled (attached screenshot). They have the MWO-449. Can someone tell me what the problem is here?
Thank you!
Hey Jake,
Did you put your license file in the installation directory or elsewhere?
You can if you put it in the installation directory:
1. move the license out of the installation file
2. open the software. It will put you in the configuration dialog of the licences where you can press set location.
3 browser to the new license file location and select the license.
4 restart the design environment and see if the problem is corrected.
Thank you
Shane C
-
Dell PowerEdge R730 + ESXi 6 U2: licensing problem bought
Hello
I am trying to assign vSphere Standard licenses, I bought via Dell (and saved).
Whenever I try to license, I get an error message:
"The entered license key has no sufficient capacity for this entity.
Has anyone ever had this problem?
I have dual CPU servers (so I bought 4 licenses) that they are by CPU.
VmWare does not seem to understand my problem.
Kind regards
Hello
What model CPU do you have? https://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1019695
-
Fix license problems after hardware?
From: Sluggofish
I'm looking for answers because nobody seems to be able to tell me.
I have a laptop that uses a limited license being that it is limited to a machine. In this case, my laptop.
I had some problems and he sent for repair. It needs a new motherboard and for $ 25 more, I allowed a better processor, always 32 bit, but 1.7 Ghz to 2.3 Ghz. He couldn't not bad for $ 25.
I have not received the return system, but last night it dawned on me that the license is dedicated to the same machine. I'm sure that Windows Vista Ultimate 32-bit will recognize a change.
Is that going to be a problem? Anyone know?
Karl
From: motarola2
There is no problem in changing the CPU, the operating system will recognize a new one. I have rarely seen after a replacement motherboard Windows would not recognize the product key, I think you just re-enter the case.
so, Yes, your computer should work perfectly.
--
motarola2
Another response of the community of Windows Vista discussion groups
-
Windows 7 Reacondicionador user license problems
We have acquired 6 laptops Dell Latitude E5500 to a Microsoft Reacondicionador (local non-profit) to use in the Recovery Center for our young men (also non-profit) to increase their skills and knowledge. The portable computers came loaded with Win 7 Pro and Office 2010 H & B. Any windows low altitude had been implemented of the security passwords. (Level of knowledge and skills of the provider is, in a couple of conversations, or even lower than mine, which not very well.)
I went through the software and ensured that it is AUSTRALIAN locale to spelling. I also went online updates of Microsoft and later to Dell software updates to the driver.
I then tried to create a Standard user and to set a password for the Admin account. When I reboot, and when I am logged into the Admin account, I got the same result: a red circle with a white inside X and 'OK' in a box. OK lead to a life normal sign on screen showing the Admin and the new account, but there is no picture/logo in the new user box and the chosen username has not shown to be. When I clicked on the new user, I was introduced to two fields: username and password. These filling correctly worked, as did selecting the Admin account and entering the password. (With users who are still rehab and trying to adapt to life in what is effectively a halfway house opposes giving them access to computers that are not protected by Word.) Similarly they have access to their phones during the first weeks.)
I tried to get the accounts invited working, with the same result.
Reference Dell continue to say they are looking at it - for two weeks so far.
It seems to me that Microsoft Refurb of Windows 7 versions can not easily allow multiple users. But it is not logical for me.
We have found the money to buy the laptops. This will really be a pity if we cannot use them.
All suggestions will be appreciated.
Hello James,.
Thanks for posting your query on the Microsoft Community.
According to the description of the problem you are facing problem with Microsoft Refurb of Windows 7 versions.
A renovated Professional computer offers you peace of mind and with genuine Windows operating system software preinstalled, this helps make your PC simpler and easier to use. With Windows and Windows Live Services, you can create, connect, and share with your PC and the cloud.
I suggest you to return the items listed below and see if it helps you to solve the problem.
Members of the Microsoft Reacondicionador program offer professionally
Refurbished PCHope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
3DES ASA5505-50-BUN-K9 [resolved] license problem
Hello
I have ASA505 with disabled 3DES, I heard that I can have the 3DES free license, so I contacted cisco more of 10 times to get the permit, and whenever they send me the same license as my base standing key: 5321ec6e 102e534b fc21e96c 841c8ca8 ce1727aa
I don't understand the problem, here is the result show activation key:
Running Permanent Activation Key:
0x5321ec6e 0x102e534b 0xfc21e96c 0x841c8ca8 0xce1727aa
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
Inside Hosts : 50 perpetual
Failover : Disabled perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Disabled perpetual
SSL VPN Peers : 2 perpetual
Total VPN Peers : 10 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
AnyConnect Essentials : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
This platform has a Base license.
The flash permanent activation key is the SAME as the running permanent key.
And the license key cisco send me whenever isexactely the same, but it should enable the 3DES encryption algorithm:
Inside Hosts : 50
Failover : Disabled
Encryption-DES : Enabled
Encryption-3DES-AES : Enabled
Security Contexts : Default
GTP/GPRS : Disabled
AnyConnect Premium Peers : Default
Other VPN Peers : Default
Advanced Endpoint Assessment : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
Shared License : Disabled
UC Phone Proxy Sessions : Default
Total UC Proxy Sessions : Default
AnyConnect Essentials : Disabled
Botnet Traffic Filter : Disabled
Intercompany Media Engine : Disabled
Platform = asa
JMX152040DW: 5321ec6e 102e534b fc21e96c 841c8ca8 ce1727aa
Can someone tell me where is the problem please?
Thank you in advance.
Plug this serial number on the EEG of tool licenses the activation key that you noted but also the text:
"ASA5500-BA-K9.
Beware, our records indicate that the material Cisco ASA firewall serial NUMBER you have submitted your registration was previously the license FOR a larger feature SET. »
What other licenses has been done on this SAA? Are you the original owner? You must call the TAC for sorting if you aren't.
-
Hello;
We have 100 AP on WCS base license. In our network, we have Cisco Aironet 1242AG AP series 75.
But WCS give an error like ' % of AP Licenses used: Violation. "
When you look at the number of AP, we see that there is a record of two for each access point. One of them is 802. 11A, the other is 802. 11 b / g but AP name is the same for both archives.
We do not use 802. 11, so we don't need.
How we solve this problem of license?
Thank you.
Ah - the solution is to go in monitor-> access points and click New search. Search ALL of your AP not associated and remove them. I noticed the same thing on my controllers. If you look in the monitor or configure lists, you see that the number of AP looks right. But if you add the AP to a floor plan, you will see all the extras (in my case, AP, which had been renamed by default). Then, I made all my AP have been renamed and remove all identifying unnamed PA and my number of licenses is fine.
-
Recently, I had to buy a new laptop and tried to transfer my music from the old system of windows XP to my new windows 7 computer with a disc hard external. Now, won't play the music that I downloaded legitimately and paid to say there is a problem with the license. What can I do? You have any ideas? The vast majority of my music won't play that sucks! Val
Hi Feemadchen,
Welcome to the Microsoft Answers site!
(1) what type of program you use to play music?
(2) this format is the music?
Some files have the safe use / anti descriptors of piracy embedded with the file requiring a license to play. When you have copied discs on your original computer they may have been lost.
If the song is or has been registered with the copy protect music checked option (found on the Rip music TAB TAB to burn Windows Media Player under Rip settings) it will always encourage media rights of use. If you copy then you will be asked to download the rights to use this computer. There are a limited number of times, you can download usage rights.
Try to re-record the songs from your original CD on the drive with the copy protect music option unchecked and see if, then they will play for you. Know also that some CDs are protected against copying factory and you must have rights to use download verified for them. I guess that's the prompt that you are talking about.
Let us know for any further assistance
Concerning
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think -
Dreamweaver CS6 license problem
Hello, I bought some time ago a license for Adobe Dreamweaver CS6
The thing is that I change computer almost every 6 months because my company is changing their latest hardware so now I have problems activating my license. When I try to activate it says my license has been activated too many times and will not let me activate it again
Can you please reset it and I would like to activate it?
I don't know if I have to insert the serial number here or private message, so I'll wait for your answer first
Contact Adobe via Live Chat customer service and ask them to reset your counter to activate. If someone gives you trouble, ask a supervisor.
-
Hi, I have format my computer and now I have problem with my license number. When I write and then I click on next the program displays the message following (invalid license number). This license has been installed without problem before.
Hi Josecortez,
Please see Help below links:
Error: "serial number is not valid for this product". Adobe Creative Suite
The activation and deactivation of Adobe problems
Let us know if that helps.
-
Acrobat 9 Pro - working fine until this sudden license problem today?
My daughter has used Adobe CS4 Premium including Acrobat 9 Pro on a laptop so far. He has worked with Mac OS 10.10. and also with 10.11.1 without restriction. Also the regular updates worked fine.
Today it again and get the following message was confusing... "The license for this product no longer works."
In my AdobeID account nor in him is Adobe CS4 or Acrobat listed as product?
It is not the first time have license issues. A few years ago there was also a problem, and we got a new serialNo.
We tried it on the desk (without an internet connection, MacOS 10.11.1) - it works fine.
What is the Adobe solution?
Sincerely, Marco
Hi Macro,
Could you please check the link of the KB doc and try to license error troubleshooting steps:
https://helpx.Adobe.com/x-productkb/global/error-licensing-stopped-Mac-OS.html
Let me know if this helps.
Kind regards
Ana Maria
-
Adobe Creative Mgoe - license problem
Hi, I have a problem with my driver's license, in help faq Adobe say it is possible to install the version purchased on both devices. Then why they told me I have to buy a new one when I try to install on my own second peripheral?
Made to your machine, you must install the CC apps the same way you did on your first machine.
Please refer to the help documents below to download the application Adobe CC:
-
License problem WS 9.0.1 and openSuSE 12.1 (x86_64)
I had some weird X-11 with my Linux system problems that resulted to reinstall - now that I have a system that works, I tried to get VMware (workstation 9.0.1) will again. But, when I click on the button marked "Enter License Key" actually nothing happens.
I have tried two ways - on the user account:
(1) request password (root - probably)(2) entered password, no key entry form is displayed
As root:
1) click on the button
(2) nothing happensI tried strace, but VMware seems to be busy returning a VMserver (that I have in any case), so for practical reasons, it is impossible to detect what is happening with the button.
I looked in the KB but don't see anything relevant.
I had a peek here but don't see anything relevant.
I tried VMware support, but since it is more than 30 days since I upgraded to 9, I would have to pay to get the problem resolved.
Anyone here seen this problem or have any suggestions?
Thank you
-Don
This problem has been seen and resolved several times. You could start by looking at this thread and change it to your needs.
-
Lightroom stand-alone license problem
Hi all
I use Lightroom 5.6 experimentally for a few weeks and I want to go there and buy a standalone license. So I downloaded the 'full' version of LR from Adobe and it starts (no problem reading of my existing LR catalog). Can I get the dialog box "Welcome to Adobe Photoshop Lightroom. Two options: 'I have a serial number and want Lightroom license' or 'I want to try. So I select the first option, then below it says 'Serial number need?' with a button 'buy '. I select "Canada" I come from down in "Country/region". When I click on 'Buy' my browser opens. For only two seconds, a screen appears to ADDRESS http://www.adobe.com/store_selector/storeselector.html, where it looks like I'm supposed to identify my country again. But immediately the browser is redirected to the product catalog (http://www.adobe.com/ca/products/catalog.html). But here there is no option to buy a standalone license. If I click on the link to Lightroom need me just to the General info page products, with no options except from the creative clouds (which I don't).
Anyone know how to buy a stand-alone license for Lightroom?
Thank you
Alex
Go to your Adobe (Canada), MENU, all products website and choose Lightroom (full or upgrade - if you have an earlier copy).
-
Host esx license problem substituting
Hi all
I have a problem when I try to replace it by an esx host.
We have a total of 20 under license issued, 19 in use (9 esx host have 2 cpu, 1 esx host has 1 cpu).
To add a new host esx (I'll call esx11), I had to unplug and remove a host of VIC (I'll call esx01).
The result is that esx11 is "unlicensed" and if I make a 'survey of status' using license server tools (FYI License Server is installed on Virtual Center), it always reports as licensed hospitality that I disconnected (esx01).
Any ideas?
Thank you in advance.
PIO Massaro
just because you disconnect will not remove the license. You must go to the ESX host, under the configuration tab and the features under license. Change your license source.
Maybe you are looking for
-
Messages do not synchronize with other iCloud devices
I now devices on iCloud- iPhone 6 s MacBook Air iMac Whenever I have delete a message from Messages on a device, it doesn't delete two other devices. All new messages are synchronized to all devices, but when I delete a device they stay on two other
-
I bought a laptop (HP 2000-2d28tu) 6 months back. Unfortunately since last sound CD/DVD-ROM does not appear in any of the installed OSs, Win 7, Win 8 and Ubuntu i.e. also not in the BIOS settings. Please suggest proper advice?
-
OS X El Capitan 10.11.2 I can't Imac bluetooth speaker JBL to recognize. Icons for keyboard/mouse / Roku show but not JBL. My Ipad recognizes and connects without a problem. Tried to sync with Itunes, but not able to find a way to do it.
-
LabVIEW Embedded for ARM build fails
I use the LabVIEW Embedded module for ARM microcontrollers with theThe EK-luminary LM3S8962 Evaluation Committee. When I try to build/run vi as an example in the tutorial (pg 13, the start-updoc) I get the following error: Build Failed. Build failed
-
Although quick and concise as possible. PC under XP SP3 Pro with AMD Athelon 2.41 GHz and had two sticks of 1 GB of ram with 256 MB radeon x 1650 just to use dual monitor graphics card. A few weeks ago it started to break up during different tasks, n