License server is no longer necessary

Similar Questions

• ORA-03134: connections to this version of the server are no longer supported in 11.2 to 9.2.0.8 database

  Hello

  I use the ODP.NET 11.2 (Oracle.DataAccess.dll 4.112.3.0) for .NET 4.5 (in Visual Studio 2012). I can connect to 11g databases but when trying to connect to 9.2.0.8 database, this error is thrown:

  ORA-03134: connections to this version of the server are no longer supported

  I do not understand why, like I could connect using Toad, but not a .NET application.

  Furthermore, I use Windows 7 64 bit.

  Any idea?

  Thanks in advance,

  Dave

  Hi Dave,.

  I see that you have version 12 of the supplier in the GAC (i.e. Version = 4.121.1.0). But only for the x 86 and you mentioned that you had Windows 7 64 bit. Your application is compiled as x 86, x 64 or Any CPU?

  You have confirmed that your application does not load this version? For example, because policy redirects in the GAC (such as Policy.4.112.Oracle.DataAccess, Version = 4.121.1.0).

  You can use a tool such as SysInternals Process Explorer or the Assembly Binding Log Viewer (i.e. the SDK fuslogvw) to confirm if necessary.

  It is true that version 12 would return ORA-3134 when you attempt to connect to a database of 9.2 because this combination is not supported.

  Thank you

  Mark

• Question of ESXi 3.5 license - can not find license server / out of the license server

  Hello I have a single esx server with 3 VM

  I can no longer boot all VM - I get the message "there's insfficient licenses to perform this operation"

  If I go to the license section I can't change the mode of licening - our original license server failed.

  How can I add a new license server?

  See you soon

  Maybe the lic file is old.

  Try to regenerate the file.

  Did you start with a host ESX 3.0? And then he move to 3.5?

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Virtual Server Center down and as its also the license server, it cannot start

  I have the virtual center server which is also the license as a virtual machine server. We had problems with the SAN today and decided to move this server to local storage in the case of other issues during the weekend, until we can diagnose/solve the problems of SAN. However, it will not start back up to stop the virtual machine to move (no installation storage vmotion again) and complains that cannot see the license server, the license server's so how can we start it?

  I tested stop this server before and to work around the problem, then we have just activated evaluation mode, the server restarted, and he returned to the license server mode when it was high, but he used to do that now and I can not start any vm at all and since most of them failed because of problems with SAN storage I need to get this resolved as soon as possible. The difference between when we tested before and now 4 months and update 3 has been applied recently.

  How do I start the server in its current or is configuration - it is no longer possible to use the evaluation mode and we do the licensing of other words, IE non-virtual?

  ......

  I managed to start the server using VM Player running in another physical server, but this is not an ideal long-term solution, but out me an affair until we solve this problem.

  Many people run in this mode.

  As a backup, just getting up an another license server using your existing key.  Point the ESX host with virtual machine on it to the 'temp' license server by connecting to the host ESX directly with the VI Client.

  Back up the virtual machine.

  Change license server address that you modified on the back of ESX host.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• LabVIEW / TestStand ignores license server settings

  Hello

  I see a rather odd behavior on my computer. We received a new license file to our license server. Once it has been imported, TestStand and LabVIEW used of temporary licenses... I ignored it for a day, but became suspicious.

  The Manager of License tool on my computer detects only the license server and properly displays the access rights for my Suite of Dev (incl. Automated test). LabVIEW and TestSTand can check a property...

  Instead, I get the error message

  LabVIEW development system

  License attempt 1:
  All the available licenses on 'xxx' are currently extracted. (NILM13)
  If you have any questions, contact your license administrator.

  Shows available licenses however License Manager. I already tried to reinstall software of NOR (took awhile...) manually remove, add license server information. I'm getting a little desperate / annoyed.

  Any ideas?

  See you soon

  Oli

  Fixed a problem.

  After the stop & a few reboots of license server, my license works again.

  Seems, it was a "personal matter" between me a license, since only my license server refused to work...

  Enjoy the weekend!

  Oli

• Get the name of the network license server automatically?

  Is it possible, perhaps by means of Windows Script, to get the name of a computer is currently using the license server?

  Hi Rose Dalban,.

  You can know which servers a computer turns to the registry HKEY_LOCAL_MACHINE\SOFTWARE\FLEXlm Manager\NILM_LICENSE_FILE license key

• Different PC user name to the user license server names

  Hi all

  I encountered the problem that on some PCs running with a goal of training of RPF of generic user account, the License Manager will not grant one of my licenses in volume. How can I get LabVIEW to communicate with the license server with a different user name for the windows login name? I already tried tools--> user name, but it has not fixed the problem.

  I'm always under 8.2.1 on these computers.

  Concerning

  Oli

  Hi Oli,

  You have licenses based on the user or computer
  licenses? From your description, looks like you have several
  licenses based on users and multiple training computers where windows
  usernames are all identical. Is this correct? If that's the case then
  You should be able to grant a license in volume for this username but it
  you won't concede more than one license under the same name. Change
  LabVIEW settings will not solve this that this problem concerns more with Windows
  and VLM. To resolve this problem, you can either go in windows and create
  new usernames or you can call and we could you spent to get
  computer license and you should be good to go.

  Lars

• Weaning to a license server shutdown

  Hi all

  I need to take one of my devel completely off-grid system. I usually use a license on site for all products of NEITHER, but he will not be able to contact the license server. I remember there is a way to get or to generate a license for use offline file, I did a few years back. Can anyone tell me the correct procedure, thanks.

  PS: just upgraded to 2013sp2, where is the list of changes?

  Hello gdargaud,

  I think that what you are looking for is a disconnected license.

  Getting Started with NI VLM - create a disconnected license or at home

  http://digital.NI.com/public.nsf/allkb/3BF6EE92ADDC036C862572A300732E00

  Please contact your administrator for server on this subject, because he is the one who will be able to generate this for you.  In addition, your question is technically a volume license manager issue, then you might find more luck if you find that you have additional questions on the subject to the search on these forums.

  Best wishes!

• Local server connect to a domain license server

  I have a server terminal server running under windows 2012 locally (domain a)

  My license server is running on windows 2012 arrived in the area. Forest mode

  I try to establish a connection between the 2 of them and it fails.

  ***

  To identify possible licensing issues, the administrator for the server monserveur.com license credentials are required

  ***

  When I provide a credentials area, it works and it reboot after failure. (No domain server)

  I even try to use a local (not domain) administrator account to connect to the license (supported in domain) server and fail too.

  I have no problem if you are using windows 2008.

  Anyone experience this before?

  Thank you

  Rgds

  Wang

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I have a ts 2008 license server with 90 per available user licenses (21 already issed). However, users get a message that says that there are no licenses available

  I have a ts 2008 license server with 90 per available user licenses (21 already issed). However, users get a message that says that there are no available licenses. The TS are iss device by installing licenses. Local group policy is not configured on each ts. The strange thing is that I can't find the option to license type within the domain group strategy, however, I suspect that this is the problem as when I go through the configuration in the RD Licensing Manager system indicates that the license server will be able to issue per user Cal. If anyone has had / overcome this problem I would be very gratefull to know the solution. Best regards Steve

  Please repost your request in one of the most appropriate Microsoft Windows Server Forums, thank you!

• Terminal server licensing server

  We have 2 licenses of cal ts on windows 2003 server we can only get a pc branch to open a session with the new ts win 2003 installed. I installed the windows 2003 ts to
  see the windows server 2003 license server. What do I need to uninstall the old ts 2000 until I can get the desktop pc 2 branch to see the new ts.

  concerning
  Matthew

  Please transfer your inquiry in the most appropriate in the Windows Server Forum.  Thank you!

• Video conference will operate without a license server TP and conductor?

  Hi all

  We need POC for video conferencing with Cisco Jabber on desktop. The scenario is similar to that we have CUCM 10.5 running in the trial license and server TP and TP driver running on the virtual machine without a license.

  We will reach videoconference without license server TP and conductor?

  Thank you & best regards

  Louis Nithin.

  Conductor Essentials can run without licenses, it offers all the functions of conductor but is limited to 1 bridge Conference and no grouping, refer to table 1 in the conductor datasheet for more information.

  TelePresence Server requires licenses to operate, you will need to purchase a license for the software, so it can be activated, as well as wallpapers or multiparty license licenses.  Screen licenses are per participant and installed on the telepresence server itself, while the multi-party licenses are either user or conference of base that are installed on the conductor.  Refer to the presentation of the product just above 1 Figure in the data sheet of the telepresence Server about the screen and the multiparty licensing options.

• license to make mistake.  Communication of license server.  problem already fuflfilled by another user.

  license to make mistake.  Communication of license server.  problem already fuflfilled by another user

  Hello

  Could you please develop your problem because we know not?

  Kind regards

  Sheena

• License to make mistake. License Server Communication problem: W_ADEPT_CORE_WRONG_DEVICE

  I upgraded my Windows 10 laptop. Digital Editions installed fine, but it will not download a ebook license. It worked fine on my old Windows XP.

  I get this error message:

  License to make mistake.

  
  

  License Server Communication problem: W_ADEPT_CORE_WRONG_DEVICE

  
  

  The book will not download on my Xperia from Sony phone either. Can anyone help?

  
  

  
  

  In this case your digital edition are very good. Maybe this is a download only for a single device. Ask the dealer to the eBooks to check the authorization of the eBook.

• "Error getting License. "License Server Communication problem: E_ACT_NOT_READY.

  When I download a library book, I get the error message "Error getting License. "License Server Communication problem: E_ACT_NOT_READY ', so that when I try to allow my copy of digital editions to my account (in an attempt to deal with this.) I used it to view ebooks from my college library, with success, but not recently.

  Help?

  Macintosh:

  1. Open Adobe Digital Wditions.
  2. Press command + shift + D to Deauthorize Adobe Digital Editions.
  3. Select clear authorization.
  4. Click OK and exit the Adobe Digital Editions software.
  5. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
     If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
  6. Open Adobe Digital Editions and reauthorize.

  Windows:

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.