Licenses of ASA

Similar Questions

• Cisco Anyconnect/WebVPN license for ASA 5510

  Hello

  Someone could please check the licenses for ASA 5510 attachment and let me know. We currently have ASA 5510 with basic license. According to the table attached under VPN sessions, he mentions that "250 combined SESSIONS IPSec and WebVPN" and to "Max box of WebVPN Session" it is mentioned that 2nd meeting, exceeding that we must buy license optional webvpn. While we the 250 combined license for IPSec and webVPN. We must purchase additional anyconnect license to set up remote access for users who want to use the internal resources from outside the network. OrElse, we don't have to purchase license and can configure webvpn/anyconnect of existing combined license existing users basic ASA license? Waiting for your response. Thank you.

  You are welcome.

  1 Yes

  2 AnyConnect requires no Java, but it can he use when connecting to one AnyConnect SSL VPN client and launch the Web browser option start Java-based. There was a bug with the AnyConnect old versions had later who should have addresses. You also have the option to launch via IE and using ActiveX or simply throw AnyConnect directly - neither of these two methods require Java.

  Here is a document TAC on the Java questions if you want more details.

  Please take a moment to note the useful messages and mark your answers questions.

• Protect and control the license for ASA with the power of fire

  I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.

  How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses

  Thank you

  Hello

  L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".

  Please discuss a case with CISCO GLO, they can help provide a CTRL license

  -DD

• AnyConnect 4.0 license with ASA-5515-FPWR

  Hi all

  I have a small question, where I can't find a clear answer for:

  A customer wants to buy a new ASA for a showroom. He wants to connect 30 phones VPN and 60 VPN users, where only 10 of them are simultaneously connected. Then we would have two choices now

  -Either go with the 3.5 Anyconnect licensing, with a premium SSL 50 license and activation phones VPN and mobility AC licenses

  - Or go to AC 4.0 license, where we would have to license 100 users with MORE licenses.

  My questions are:

  -Can I any other / more license on the SAA (i.e. SSL)

  -Where to install the license

  -How is the number of users (i.e. of the ad groups, local accounts)

  Is there a documentation clearly indicating the answers

  Thank you all for your help.

  If you want that the phone itself to be the endpoint remote VPN access, then Yes - you need VPN phone license which requires in turn AnyConnect Premium (for 3.x installations)

  "Plus" AnyConnect (for 4.x) includes 'VPN functionality for PC and mobile platforms, including per-app VPN on mobile platforms and phone Cisco VPN' (referring to the January 2015 of the ordering Guide AnyConnect 4.0 version)

• License FireSIGHT - ASA IPS

  Hello

  I currently installs a virtual appliance of FireSIGHT to manage installed with fire services ASA 2.

  My Defense Center is an appropriate license, using the key PAK I got.

  I bought 2 IPS for two of the ASA subscription licenses.

  I have configured the Manager on both devices of sourcefire and added to the centre of defence.

  Now, my problem is: I can't attribute any IPS policy because there seems to be no licenses installed on the domain controller to be applied to devices...

  My question is: what I have to buy additional licenses for the domain controller for the IPS features (Protection) or do I missed something here? :-)

  Thank you very much

  Kind regards

  Hello

  As Marvin commented, you will have a license CTRL "ASA5525-CTRL-ICA" accompanying the device through a certificate of claim. On the certificate, you should see a number PAK and steps to save to get the license. Please follow these.

  If you have purchased a = L - ASA5525 - TA - LIC, then that gives you the right to obtain updates to signature for CONTROL-PROTECT features. There is no PAK or license for this PID.

  -DD

• LICENSE OF ASA

  I need to KNOW for the firewall of the firepower of ASA for the Site to site VPN sessions or client sessions vpn site need no license.

  The ASA 5516 X (with or without fire power module) is fully approved for IPsec site-to-site VPN until the capacity of the equipment (300 for this platform).

  "customer site" or to speak (if SSL or IPsec IKEv2) VPN remote access, require licenses AnyConnect. There are 2 Premium / Apex licenses included with all the ASAs which are there mainly to test the feature.

  If you want to set up for multiple users, you can buy AnyConnect. Currently, it is available in two versions - more and Apex. More is a base of remote access VPN and the client must be installed on the end user's computer. Apex is the top version with many more advanced features and may possibly be used to configure clientless SSL VPN by which the end user only needs a browser.

  Visit the AnyConnect product information pages for many more details.

• All necessary licenses on ASA 5510 for old Cisco VPN Client

  We're trying to migrate our firewall Watchguard to a Cisco ASA 5510, who bought some time ago. For some reason, all of our users have already installed the old Cisco VPN client. I think it will work. Are there licensing issues on the 5510 I had to be concerned with?  No matter what special config that needs to be done on the 5510?

  Fix. You don't require licensing of AnyConnect of any type of configuration and the use of IKEv1 IPsec remote access VPN (which use the old Cisco VPN client).

  You will be limited to 250 active IPsec peers (remote access more no matter what VPN site-to-site) by the platform (hardware) device capabilities that are enforced by the software.

• licenses for ASA 5505, site-to-site vpn

  Hi, gang,

  I've not worked on ASA for a few years, so a little rusty on the issuance of licenses. my client has 5 locations, a few computers at each location. 4 tunnels vpn site-to-site will be implemented, so that 1 Server @ main location of accounting is accessible from other. simple configuration. I wonder if I have to purchase additional licenses? This is the part number of the device that I'm aiming for:

  ASA5505-BUN-K9
  Cisco ASA 5505 Adaptive Security Appliance 8 ports Fast Ethernet Switch with 10 user licenses

  Thank you!

  Jonathan

  Your license for the VPN is perfectly fine as the Base license supports 10 VPN-peers. The 10 user license is what could restrict more.

  And if the 5505 is not yet bought, go directly to the ASA 5506 - X as the 5505 is a legacy device and will probably go little EOS.

• AnyConnect VPN license on ASA 5510

  Hello

  We have ASA 5510 IPS with basic license. We must now Anyconnect support for more than 2 users.

  Anyconnect (tunnel mode) but essentially Anyconnect license enough? Do need me a license for SSL VPN peers?

  What about Anyconnect without customer, I see that I need a premium license?

  This one is pretty ASA5510-SSL50-K9? It's really expensive compared the Anyconnect Essentials.

  Here is my worm out sh:

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 50
  Internal hosts: unlimited
  Failover: disabled
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 0
  GTP/GPRS: disabled
  SSL VPN peers: 2
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes a basic license.

  Yes, AnyConnect Premium includes all the SSL features (including the complete tunnel mode AnyConnect - which is what sustains essential AnyConnect).

  So if you buy the 50 user for AnyConnect Premium license, you can have up to 50 SSL VPN connections, if they are the combination of all without customer, or combination of tunnel without customer and full, or just full tunnel. All with a maximum of 50 simultaneous SSL tunnels.

• Licensing of ASA - AnyConnect

  Hello

  I am looking to Anyconnect ASA5515-X licenses with the power of fire (ASA5515-FPWR-k9) but am a bit confused to for AnyConnect license options...

  Can someone explain to me how it works?

  I got a quote for an ASA5515-X-K9 previously with 50 premium SSL VPN licenses, but now I'm looking at the ASA5515-FPWR-k9, I can't work on the right option. Later that I got for 50 licenses AnyConnect more seems to be 10 times cheaper? Surely, it can't be the same thing?

  Most of old roughly equate with the new more licenses (with no separate required Mobile license) and is generally sold as a term-based perpetual license vs.

  The premium of the old maps to the Apex (no separate assessment Endpoint advanced required). It is sold only focused on the term (1, 3 or 5 years).

  There is a guide AnyConnect directing partners and resellers to use.

• SSL VPN license for ASA

  It must be an easy question - but I'm having a hard time finding an answer. How are the SSL VPN to the end user a license?

  Let's say I have 300 users, SSL, but only 20 concurrent SSL at any time. Do I need licenses for the 300 full or 20 competitors?

  Thank you

  Jim

  Hey Jim,.

  SSL licenses for only simultaneous connections. The only limitation you will encounter is how SSL sessions each platform supports (i.e. 750 concurrent sessions on an ASA5520).

• AnyConnect user more perpetual license can share several ASA?

  Dear all my friend.

  Need help :)

  If I order ' Cisco AnyConnect 50 user more perpetual license ", SKU 'AC-PLS-P-50-S '.

  Can I use this 15 license in ASA, ASA B 15 users and 30 users in ASA C?

  is this similar with license for Collaboration, got PAK, and we can use partial licenses to any machine?

  You can use it in several ASAs. However the total number of unique users must not exceed the number of licenses.

  Your example request 15 + 15 + 30 = 60. 60 > 50 so you'd be in violation of the license.

• License problem of security context for Cisco ASA 5585

  Hello

  Can someone help me in license number for the ASA 5585 security environment,

  We recently purchased a box ASA (5585) which has 2 default security context and we had like to have context for this ASA 25 permit and we got two codes PAK of Cisco for 20 licenses and 5 respectively.

  When we generate the license key by combining the two codes Portal Cisco PAK and apply the same on ASA, do not see the 25; Instead, it shows only 20.

  Is it really possible to stack context like 20 + 5 licenses or to buy a PAK code for any license 25 context?

  Please advise me on this.

  Thanks in advance!

  Kind regards

  Kam

  Hello

  This should probably not be handled with Cisco directly or through the company that got you the license.

  To my knowledge, there is a possibility that the you have everything first to install a license key and the other licence could be upgraded from the previous license until the following limit of function under license.

  I had several occasions where I was provided with the wrong license and had to communicate with Cisco/provider to get licenses appropriate for my device.

  While I was announcing this response I checked the document of licensing for ASA models. It seems to me that there is no security content license 25 for the SAA. The deadline is 20 and license of SC 50 SC

  Check this document:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/intro_license.html#wp1230400

  -Jouni

• Integration of ASA with ACS

  Hi all

  I try to incorporate some ASA (8,6) with ACS (5,7), here is the configuration of the SAA.

  SH run | in aaa
  RADIUS Protocol RADIUS AAA server
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + (management) host 10.243.14.24
  GANYMEDE + LOCAL console for AAA of http authentication
  authentication AAA ssh console GANYMEDE + LOCAL
  Console telnet authentication GANYMEDE + LOCAL AAA
  AAA accounting console GANYMEDE + ssh
  AAA accounting command 15 GANYMEDE privilege +.
  Console telnet accounting AAA GANYMEDE +.
  AAA authorization exec-authentication server
  AAA authorization GANYMEDE + loCAL command

  The problem is that I can get connected to ASA, but I can't type all commands in the CLI, I get the error message "failure of command approval.

  I have the same sets of commands and the shell profiles created for switches and it works perfectly.

  This is the behavior of ACS journals

  1. once I am having authenticated, I can see the logs in ACS with my username
  2 but when I type any commnds, is put down my permission and I see in the newspapers of the authorization of the CSA that this username is "enable_15".

  Can someone help me identify what the problem is

  Thank you
  Reverchon

  This happens when we have control permission enabled on ASA and try to run any command level 15 on SAA. To correct this problem you must check enable authentication of a user against GBA / GANYMEDE.

  AAA authentication enable console LOCAL + GANYMEDE

  After above listed licensing order, ASA will start to check the enable password against ACS/Ganymede and you use Ganymede activate the password that we can put on by user.

  ~ Jousset

• AnyConnect Premium license

  I'm looking for the purchase of a license for Anyconnect Premium for the ASA5510 running IOS 8.4. I found the following, but I can not find the description of ASA-NZEV-5510 =. Is that what that means unlimited number of users?

  Shared Premium VPN Server License-500 ASA-VPN-500 users =

  Shared premium VPN Participant license - ASA 5510 ASA-NZEV-5510 =

  I worked on IOS 8.2, the CSD is a separatepurchase. Cisco Secure Desktop is included in this license? If this is not the case, what is the part number?

  OK - you need L-ASA-SSL-250.

  Purchase which allows you to get an activation code, which, when installed on your device will change

  AnyConnect Premium peers: 2 perpetual

  "250" (as opposed to the default 2).

  Please evaluate the useful messages.