Licenses PS CC2014 lost during any new installation at CC, 2015

Similar Questions

• During the new installation of xp pro, the program never asked for the product key or what type of network installation.

  XP pro ie8 32 bit svc pk 3.

  during a new installation http://aumha.net/viewtopic.php?f=62&t=44636, most of the steps was OK, however, my product key was not for and type of network was not.

  As the third so clean installation I did, do you think the pc is to remember my preferences?

  Thanks for any help.

  I think that when you install XP and turn on the first time, Microsoft collects information from your system during this process to develop a signature of material that goes with your license and store it away.  Of course, they do not collect any personal information :)

  They do it so that if someone takes your XP installation license and tries to apply it to another computer (it is piracy) that the installation would not activate as your activation must match your hardware.

  If someone tried to install and activate your license on another machine with a different set of hardware, MS would say, wait a minute - this license has already been activated on another machine, and he could complain.  Then someone has some ' splaing to do.

  I suspect that in your facilities in 2nd and 3rd, MS takes a look at things and said... this material signature and the license already go hand in hand, that nothing has changed here, so it is not necessary to activate again, all right.

  This is why, if one day you need to replace your motherboard and reinstall XP, even if you have everything and it's all legitimate, you will probably have to reactivate again since the signing of material would be completely different for this license that MS remembers the first activation.  A few small hardware changes, that you can get away with, but if the number of points collected to compensate for the signing during the initial activation is too different, you will need help activating.

  In this case, if things are legitimate, you can call MS activation team, and if you can convince them that there is no hacking involved and you just have to change your motherboard, they work with you to get your reactive stuff.

  Since you are looking at AUMHA, they have a writing little upward about it here, but there are official documents of Microsoft you can read also ('points' and how they work):

  http://aumha.org/win5/a/WPA.php

• CPU driver: when during the new installation?

  When during a new should installation I install the AMD processor driver?

  I do the install in this order...

  Original disc of XP Pro sp2

  Chipset drivers

  AMD processor driver

  ISO XP SP3

  .. .but then (if I installed the processor driver) when restarting the Service Pack, I get this screen "Windows could not start normally.

  I deleted the PCI expansion cards.

  I really want to use this driver from AMD, because in another thread , I found that has to use instead of the version offered through Microsoft Update, a problem with the USB connections.

  My page card Presario SR1913WM mobo

  coyote2 wrote:

  everyone you have other ideas on why I can't use more than 3 GB even with matched RAM pairs?

  I came across one (for me surprising) solution: I tried to install the operating system on a different hard drive.  I removed the 1.5 TB drive (which had surpassed the Seagate hard drive diagnostics) and put in a borrowed 120 GB HDD.  Now with 4 GB of RAM, I don't me screen "Windows did not start properly.

  I don't understand why the 1.5 TB drive gave me this problem.  I tried to install the OS as all one partition and 240 GB of it (with the rest, that is not partitioned, or a separate partition).  Do you have my mobo have problems speaking as well such a great system unit and a fourth GB of RAM or is something wrong with this 1.5 to Seagate (which is not, BTW, have the f/w other a 1.5 TB Seagates question).

  Anyway, tomorrow I'll try install on a 300 GB hard drive, which I hope will find a House like this PC system drive.

• I deleted something in the windows which caused my computer to not allow any new installation. How can I fix it?

  I have reviewed all the files except the program files and System 32 and has done a lot of deletion due my computer of spinning and spinning and spinning... etc.  After that I tried to analyze something and scan it gave me a message that there is no driver found.  I tried to reinstall the driver and tried to reinstall another driver to a different scanner, but my computer does not have a configuration.  Can someone help me with this?

  • Tried a System Restore to a point before delete you?
  • You may need to perform a repair of Windows XP Installation , but you want to do this carefully if you have a newer version of Internet Explorer installed now.  It would work BETTER if you have your installation media of Windows XP with Service Pack 3 integrated into it because it is likely that you have Service Pack 3 installed on your computer now (and the 90 + updates come after that).
  • Finally - how are * your * backups of * your * stuff?  Your documents, your photos, your music, your bookmarks, your installable applications, your serial numbers and product keys, etc. and so on?  Also, do you know what hardware drivers your system needs to communicate correctly with all the material inside and connected to your computer?  (Belarc Advisor would be a good FREE tool to run and print the results if you can.  It lists a lot of this information for you.)  You maybe just to perform a new installation of Windows XP.

  Come back - let us know what is happening and how things are going.

• IPS5.1 (1 d) is required during the new installation of IPS5.1 (1)?

  Hello

  I have a module of IDSM2 I reimagee with WS-SVC-IDSM2-K9-sys-1.1-a-5.1-1.bin.gz

  To achieve the level of signature last on ORC (S224 today), I have to install IPS 5.1 (1 d) or IPS 5.1 (1p1) first?

  By my knowledge, I don't require minor updates because it is a new installation of IPS 5.1 (1).

  Pls confirm. Thank you.

  You don't need to install 5.1 (1 d) on top of the freshly updated sensor 5.1 (1); If you have tried, he would miss anyway.

  You must install the patch of p1, then the update of the GIS S224. So, looks like it's exactly what you plan to do, so it's just confirmation.

• Help! During the new installation of windows 8 from windows 7, received the error message "could not find readers.

  First post: I have a hp Envy 4-1030us ultrabook comes with windows 7.  from 3 months (after about 1 year of use), he started having the BSOD (blue screen of death) to STOP the messages of error 0x0000007e constantly interrupting sessions.  factory reset which has worked for 2 months but started to do it again.  tried the factory reset again, but now he makes mistakes BSOD after 2-10 minutes of use.  I was so fed up that I had a new OEM DVD of windows 8 and try to start it from the external DVD player connected via USB (laptop doesn't have a DVD player in itself).  When I get to the custom installation, without partitions or drives are listed and the error message 'we could not find all the readers'.  Since it is an ultrabook there is a 32 GB SSD and a 500 GB HARD drive.  in windows 7, these discs are seen without problem.  What I am doing wrong?  Why install it windows 8 can't see the internal drives?  Thanks in advance for any help you can give.

  Hello

  See the links below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-install-unable-to-find-my-SSD-hard-drive/e54ff7bc-50a9-4e05-85cd-542ca71f621d

  http://www.eightforums.com/tutorials/9573-SATA-driver-load-Windows-8-Setup.html

• Should what drivers I for any new installation

  Hi all:

  I have X 220

  I want to clean install windows 7 pro

  During installation, I am asked to insert a CD/DVD driver

  and I don't have it.

  I intend to download the drivers from lenovo Web site.

  But there are so many pilots, that one would be sufficient?

  Thanks in advance

  osager wrote:
  Sorry, I edited my original post.
  I want to say that I have X 220
  I WANT TO clean install Windows 7

  Currently, I have a linux system on it.
  So I do not have the ThinkVantage.

  So I bought the DVD of Windows 7 from the store
  and all by installing the DVD of windows 7
  the system prompted me drivers.

  You can make it complicated for help us to you. In this post , you wrote that you have downloaded an ISO file that you found on the net. Here you say you bought a DVD.

  You will need an official Win7 disk (or ISO real) that corresponds to the type of product key of Windows you have. A legitimate Win 7 disc will not ask for drivers.

  Start Win 7 installation disc

  Follow the prompts

  Enjoy

  If you do something else than that, then you don't have a record of Win 7.

• any new installation of i3 drivers z 570

  I need to know first if xp will be faster and more compatible with it

  I installed the drivers from the dvd and so far I m not having any problems and I like this machine! His continuous BEPGS this relationship )

• HD missing during the new installation of windows 7

  I have a partitioned hard drive and when I try to get rid of the partition of my computer tells me that the two are the main readers. When I try to reformat and reinstall windows 7, it can not find all the disks on my computer. I'm so lost. All I want to do is erase my HD and install the 64 bit version of windows 7. I currently have windows xp and 7 but only 7 loads. What should I do?

  Create a system repair disc:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  Then download and install Easeus Partition Manager in Windows 7 and use it to delete the partitions you want.

  EASEUS Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html

• What partition for any new installation of Windows 7 64-bit should be used?

  I did a full install of Windows 7 64 bit on a laptop computer that is already running Windows XP MCE 2005 32-bit. I didn't know which partition to install the OS on. There were 2 choice: had the majority of hard disk space, the other had a small amount of space (I think it was only a few GB) and next to him, said 'OEM reserved. I didn't know about 20 GB of free space, so I chose the partion with most of hard disk space.

  What is the right thing to do?

  If it's not then should I install Windows 7 on the other smaller partion again or should I delete this partition?

  I appreciate any assistance in this matter.

  There are several scenarios where an untrained user this doubt. If there a 8 GB oem partition (wtf for kind of crapware they installed in some systems, ask yourself... ;-)) and a XP/Vista system 100 GB partition C and a 40GB partition and then he might be tempted to choose the 40 GB partition because that has the most available space if, for example, the 100 GB drive is full of movies or other stuff.) So it's a matter of good and valid. I don't know if the system would be able to dual boot automatically if install you on a 40 GB partition in this case, have not yet tried. You know, Andre? I suppose so, but do not know about you.

  Oh, and in any case: you have made the right choice. Since now your old OEM recovery partition is still intact, should, for some reason, want to return to your original operating system in the future (incompatibility of system or other (little likely, but ok...)) then you can. Although there are some reported problems with whom, since you may not be able to get into the medium in the usual OEM recovery partition anymore. For example, HP has for many models, a patch recovery partition available that you can apply after installing windows 7. This can often be useful, because it might be necessary at some point in time for you to enter the OEM recovery partition, since usually they do not only install the Sysprep image and crapware there, but often also possible diagnostic software for their particular type of material you might need when the system does not start because of a hardware failure.
  So, check if you can always insert the partition or if your OEM has an update is available for this, if necessary.
  Fun with 7!
  (I'm) ;-)

• during a new installation reformatted Windows xp, it freezes at 34 minutes of installation of devices

  I have an IBM T21 thinkpad had to reinstall windows xp - has made a quick format on this before installing, did not start then I tried in safe mode, it has started up in this way, it would not boot in safe mode with network also. said to reinstall again to do the full format, now it freezes at the 34 minute when installing the device mark. help would be appreciated.

  Hello

  Follow the steps from the link and check if it helps: Setup stops responding with 34 minutes remaining: http://support.microsoft.com/kb/828267

• Update copy, can not be used for any new installation...

  I recently upgraded to vista and I had XP on my D: drive, but I took it because I thought as I didn't need. Now when I try to activate vista it says this key can be used to upgrade... what the _ I'm supposed to do now? It's not like one do not buy...

  Reinstall XP > and then upgrade to Vista XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Could not find AIRes.dll during any new AI CS6 to 16.0.5

  I get the following message displays when I try to update HAVE CS6 worm. 16.0.3 to 16.0.5:

  "Cannot find AIRes.dll. Please re - install the application.

  I have uninsatlled and reinstalled and changed to the admin permission. Rebooted computer and still get message.

  8.1 to win

  16 GB of RAM

  Refer to the doc.

  http://helpx.Adobe.com/security/products/Illustrator/apsb14-11/_jcr_content/main-PARS/down load/file.res/Install%20Instructions%20for%20Illustrator%20CS6%20Hotfix.pdf

• Illustrator 17.1 CC crashes at the start of any new installation on Mac running 10.6.8

  How can I make it work

  You have third-party plug-ins?

  The fonts Tahoma and Verdana are installed as TTF?

• After disk hard crash, loaded Windows 7 and get "Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations.

  Original title: Windows Vista product key used for any new installation.

  I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If you do not have your Windows Vista installation media, you can download a fresh copy:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).

  

  FF