CPU driver: when during the new installation?

When during a new should installation I install the AMD processor driver?

I do the install in this order...

Original disc of XP Pro sp2

Chipset drivers

AMD processor driver

ISO XP SP3

.. .but then (if I installed the processor driver) when restarting the Service Pack, I get this screen "Windows could not start normally.

I deleted the PCI expansion cards.

I really want to use this driver from AMD, because in another thread , I found that has to use instead of the version offered through Microsoft Update, a problem with the USB connections.

My page card Presario SR1913WM mobo

coyote2 wrote:

everyone you have other ideas on why I can't use more than 3 GB even with matched RAM pairs?

I came across one (for me surprising) solution: I tried to install the operating system on a different hard drive.  I removed the 1.5 TB drive (which had surpassed the Seagate hard drive diagnostics) and put in a borrowed 120 GB HDD.  Now with 4 GB of RAM, I don't me screen "Windows did not start properly.

I don't understand why the 1.5 TB drive gave me this problem.  I tried to install the OS as all one partition and 240 GB of it (with the rest, that is not partitioned, or a separate partition).  Do you have my mobo have problems speaking as well such a great system unit and a fourth GB of RAM or is something wrong with this 1.5 to Seagate (which is not, BTW, have the f/w other a 1.5 TB Seagates question).

Anyway, tomorrow I'll try install on a 300 GB hard drive, which I hope will find a House like this PC system drive.

Tags: HP Desktops

Similar Questions

  • During the new installation of xp pro, the program never asked for the product key or what type of network installation.

    XP pro ie8 32 bit svc pk 3.

    during a new installation http://aumha.net/viewtopic.php?f=62&t=44636, most of the steps was OK, however, my product key was not for and type of network was not.

    As the third so clean installation I did, do you think the pc is to remember my preferences?

    Thanks for any help.

    I think that when you install XP and turn on the first time, Microsoft collects information from your system during this process to develop a signature of material that goes with your license and store it away.  Of course, they do not collect any personal information :)

    They do it so that if someone takes your XP installation license and tries to apply it to another computer (it is piracy) that the installation would not activate as your activation must match your hardware.

    If someone tried to install and activate your license on another machine with a different set of hardware, MS would say, wait a minute - this license has already been activated on another machine, and he could complain.  Then someone has some ' splaing to do.

    I suspect that in your facilities in 2nd and 3rd, MS takes a look at things and said... this material signature and the license already go hand in hand, that nothing has changed here, so it is not necessary to activate again, all right.

    This is why, if one day you need to replace your motherboard and reinstall XP, even if you have everything and it's all legitimate, you will probably have to reactivate again since the signing of material would be completely different for this license that MS remembers the first activation.  A few small hardware changes, that you can get away with, but if the number of points collected to compensate for the signing during the initial activation is too different, you will need help activating.

    In this case, if things are legitimate, you can call MS activation team, and if you can convince them that there is no hacking involved and you just have to change your motherboard, they work with you to get your reactive stuff.

    Since you are looking at AUMHA, they have a writing little upward about it here, but there are official documents of Microsoft you can read also ('points' and how they work):

    http://aumha.org/win5/a/WPA.php

  • Help! During the new installation of windows 8 from windows 7, received the error message "could not find readers.

    First post: I have a hp Envy 4-1030us ultrabook comes with windows 7.  from 3 months (after about 1 year of use), he started having the BSOD (blue screen of death) to STOP the messages of error 0x0000007e constantly interrupting sessions.  factory reset which has worked for 2 months but started to do it again.  tried the factory reset again, but now he makes mistakes BSOD after 2-10 minutes of use.  I was so fed up that I had a new OEM DVD of windows 8 and try to start it from the external DVD player connected via USB (laptop doesn't have a DVD player in itself).  When I get to the custom installation, without partitions or drives are listed and the error message 'we could not find all the readers'.  Since it is an ultrabook there is a 32 GB SSD and a 500 GB HARD drive.  in windows 7, these discs are seen without problem.  What I am doing wrong?  Why install it windows 8 can't see the internal drives?  Thanks in advance for any help you can give.

    Hello

    See the links below:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-install-unable-to-find-my-SSD-hard-drive/e54ff7bc-50a9-4e05-85cd-542ca71f621d

    http://www.eightforums.com/tutorials/9573-SATA-driver-load-Windows-8-Setup.html

  • IPS5.1 (1 d) is required during the new installation of IPS5.1 (1)?

    Hello

    I have a module of IDSM2 I reimagee with WS-SVC-IDSM2-K9-sys-1.1-a-5.1-1.bin.gz

    To achieve the level of signature last on ORC (S224 today), I have to install IPS 5.1 (1 d) or IPS 5.1 (1p1) first?

    By my knowledge, I don't require minor updates because it is a new installation of IPS 5.1 (1).

    Pls confirm. Thank you.

    You don't need to install 5.1 (1 d) on top of the freshly updated sensor 5.1 (1); If you have tried, he would miss anyway.

    You must install the patch of p1, then the update of the GIS S224. So, looks like it's exactly what you plan to do, so it's just confirmation.

  • HD missing during the new installation of windows 7

    I have a partitioned hard drive and when I try to get rid of the partition of my computer tells me that the two are the main readers. When I try to reformat and reinstall windows 7, it can not find all the disks on my computer. I'm so lost. All I want to do is erase my HD and install the 64 bit version of windows 7. I currently have windows xp and 7 but only 7 loads. What should I do?

    Create a system repair disc:

    http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

    Then download and install Easeus Partition Manager in Windows 7 and use it to delete the partitions you want.

    EASEUS Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html

  • After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

    After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

    Hi TedWie,

    Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

    Windows XP SP3.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

    Windows XP SP2. (According to THE level of SP)

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

    Note:
    If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

    If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

    How to troubleshoot a SP3 Installation fails.

    http://support.Microsoft.com/kb/950718

    Let us know if this solves the problem.

  • new hard drive - what is the difference in performance between the new installation of Windows 7 or a clone of old hard drive?

    I get a new hard Hard Drive (SSD).  The new disc is the same size as my existing SATA drive.  I can do either a new

    the installation of Windows 7 or a clone old hard drive?  I would prefer to clone the old hard drive and keep all my settings, etc.   It's empirical data on the performance difference between a new installation of Windows 7 or to continue with the Windows 7 which was 3 or 4 years ago.

    I know the conventional wisdom is that the new installation is faster, but, no matter who actually tested and compared the differences?  I know I'll get better performance of the SSD the SATA drive, but I don't know if it's worth the hassle to do a fresh install and redo all my programs and settings.

    Others that the performance of the SSD you should not see any differences.  If you do, you can always do a clean installation later.

  • Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

    Hello

    First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

    So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

    In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

    -Device type Other devices

    Reference of the manufacturer- Unknown

                         Location     -         Bus PCI 3, device 1, function 3


    Under device status, it says the following:

                           The drivers for this device are not installed. (Code 28)

    There is no driver selected for the item or a set of device information

    To find a driver for this device, click Update driver.

    Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

    list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

    I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

    computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

    the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

    He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

    I could really use some help here.    Any ideas or help would be greatly appreciated.

    Thank you

    Bryan Ray (Richmond, WILL)

    BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

    Thanks Steve!

    Roger

  • upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

    I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

    my PC configuration is like below:

    Card mother Intel DH61WW
    Processor Core I3 2100 3.1 Ghz
    4 GB OF DDR3 RAM
    Seagate 1 TB SATA HARD drive
    OS: Microsoft Windows XP Professional SP3

    I run Windows 7 upgrade advisor in which some results below the incompatibilities:

    Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
    Unknown Intel we have not the compatibility information about this device.
    Intel 82579V Gigabit Network Connection
    Unknown Intel we have not the compatibility information about this device.
    Realtek High Definition Audio
    Realtek unknown we have not the compatibility information about this device.

    Here's my conceerns:

    What needs to be done to overcome the problems of incompatibility?
    Do I need to download new software files compatible for windows 7 and then install
    for example VLC media player, Skype, MySQL Server I am running
    or currently existing files are compatible to install with Windows 7?

    Would I be able to upgrade to windows 7 without any problem and safely?

    Could you please help me with the questions above?

    Please correct me with additional suggetions that I may have missed with.

    Looking forward to hear from you

    Thank you

    You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

    The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

    John

  • My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?

    My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?

    My current C:\ Size of the drive is 500 GB (I shrunk it once).

    Thanks for help.

    See the following topics:

    http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

  • Can not start the server of the University Complutense of MADRID after the new installation of 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit EA

    Hi all

    After the new installation of the WCC 11.1.1.8 on Microsoft server 2008 R2 SP1 64-bit UCM_server1 EE cannot start. (Please see trace below). WCC 11.1.1.7 work fine in this environment.

    Steps to follow:

    1. installation of jrockit - jdk1.6.0_45 - R28.2.7 - 4.1.0

    2. installation of WLS 10.3.6

    3. installation of the WCC 11.1.1.8

    4 creating the UCR 11.1.1.8 schema

    5. creation of field of config.cmd with AdminServer, UCM_server1, IBR_server1

    6. run Admin - (success)

    7 run (optional) NodeManager - (success)

    8 run UCM_server1 - failed

    Still not work after having patched MLR 1 for WCC 11.1.1.8 or upgrade 11.1.1.7.

    Log files we can see this problem caused by the JniNativeOsUtils.dll file in ' < Middleware Home > \Oracle_ECM1\ucm\idc\components\NativeOsUtils\lib\windows-amd64\7.2.1.1.

    I have replaced JniNativeOsUtils.dll with the same 11.1.1.7 file version and UCM_server1 started working

    I got errors when starting (syNativeOsUtilsNotLoaded and UnsatisfiedLinkError - you can raise in trace below), but COE upward and the works.

    I also get error when you try to start the utility SystemProperties or ComponentWithard:

    Activation context generation failed for "C:\Oracle\MIDDLE~1\USER_P~1\domains\WCC_DO~1\ucm\cs\bin\SystemProperties.exe." Load Assembly Microsoft.VC80.MFC, processorArchitecture = "amd64", publicKeyToken is "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762' is not found. Please use sxstrace.exe for detailed diagnosis.

    Any ideas?

    Thank you

    Leon

    -------------------------------------------------------------------------------------------------------------------------

    ERROR:

    javax.servlet.ServletException: could not start a deployment of servers of IDC.

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1268)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.io.IOException: csServletFailedToFullyInitialize

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:139)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:252)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.data.DataException:! Abandoned facility.

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:554)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:! csInitSecurityError

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:140)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: intradoc.common.ServiceException:! syFileUtilsUnableToCreateSpecifiedDir, C:/Oracle/MEDIUM ~ 1/USER_P ~ 1/areas/WCC_DO ~ 1-AAU/cs/config/private

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:570)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:76)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:574)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:328)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:101)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:627)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:104)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:88)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1259)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:427)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:672)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:52)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:31)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.lang.AssertionError:! syNativeOsUtilsNotLoaded

    at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:452)

    to intradoc.common.NativeOsUtilsBase. < init > (NativeOsUtilsBase.java:360)

    to intradoc.common.NativeOsUtils. < init > (NativeOsUtils.java:28)

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.lang.UnsatisfiedLinkError: intradoc/common/NativeOsUtilsBase.getNativeVersion () Ljava/lang/String;

    at intradoc.common.NativeOsUtilsBase.doLoad(NativeOsUtilsBase.java:448)

    to intradoc.common.NativeOsUtilsBase. < init > (NativeOsUtilsBase.java:360)

    to intradoc.common.NativeOsUtils. < init > (NativeOsUtils.java:28)

    at intradoc.common.FileUtils.checkOrCreateDirectory(FileUtils.java:566)

    at intradoc.conversion.StandardKeyLoader.init(StandardKeyLoader.java:36)

    at idc.conversion.jps.CSFKeyLoader.init(CSFKeyLoader.java:47)

    at intradoc.conversion.SecurityObjects.init(SecurityObjects.java:132)

    at intradoc.conversion.CryptoPasswordUtils.initSecurityObjects(CryptoPasswordUtils.java:75)

    at intradoc.conversion.CryptoPasswordUtils.loadPasswordManagement(CryptoPasswordUtils.java:136)

    at intradoc.server.IdcInstallInfo.buildPasswordInfo(IdcInstallInfo.java:850)

    at intradoc.server.IdcInstallInfo.createConfigAndPasswordFiles(IdcInstallInfo.java:573)

    at intradoc.server.IdcInstallInfo.continueEarlyInstall(IdcInstallInfo.java:548)

    at intradoc.server.IdcSystemConfig.initConfigEarly(IdcSystemConfig.java:205)

    at intradoc.server.IdcSystemConfig.loadInitialConfig(IdcSystemConfig.java:323)

    at intradoc.server.IdcServerManager.init(IdcServerManager.java:100)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:626)

    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:457)

    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:103)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)

    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)

    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)

    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1257)

    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:531)

    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)

    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)

    to idcservlet. IdcFilter.init (IdcFilter.java:156)

    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)

    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)

    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)

    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)

    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)

    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)

    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)

    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)

    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)

    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)

    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)

    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)

    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)

    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)

    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)

    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)

    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)

    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Hi all

    Cause of problems is the lack of 'Visual C++ 2005 SP1 Redistributable Package'

    Environment works great after installing the two versions (x 86 and x 64)

    Thank you

    Leon

  • Install ONLY Vision Demo Database and NOT the new installation?

    During the process of installing Oracle Applications R12 on Oracle Enterprise Linux.
    for the database layer, the installer provides an OPTION that allows you to
    ONLY install the (demonstration of Vision database) and NOT the (new installation)?

    If so, can you point me to some documentation on how this is achieved and that a
    estimate on how much disk space it would require?

    Thank you!

    Hello

    According to the manual 'quick install', page 2-9, it says:
    DIRECT QUOTE - "you can install a new database or a database of demonstration of Vision."
    From this quote, I guess that we can install the demo database, without having to install a database of fresh PROD.
    Don't you think that my assumption is correct?

    Your assumption is correct, but you should consider that quick install will also install the application part also in addition to the database.

    You can either install a fresh database (including the part of the application), but this database is clean (no data), and usually it is used for production after you make the necessary functional configuration OR a vision of the demo database (including the part of the application), and this instance is ready for use as functional configuration is already out in the database (used for demonstration purposes).

    If you are doing a new installation--> you'll need about 90 GB (55 for the database that is clean and 35 GB of application).
    If you do a vision--> you install will need approximately 260 GB (225 for the database which includes configuration data and 35 GB of application).

    Kind regards
    Hussein

  • Need hardware for the new installation of R12 (12.1) under Linux

    Cheap DBA

    Kindly advice me the hardware, CPU and memmory for the following specifications for the new installation.

    100 users.

    500 GB Production database
    Application of Production of 500GB
    500 GB of Test instance.

    Linux operating system.

    Oracle R12 Application application (12.1)

    No configuration RAC and DR.


    Best regards
    SG.

    PGO

    Please visit the links referenced in this thread.

    Sizing
    Re: sizing...

    Kind regards
    Hussein

  • I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

    I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

    I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

    There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

    Hey AmnonMikeCohen,

    Thank you for being a part of the communities of Apple Support.

    I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

    Reset the management system (SCM) controller on your Mac.

    How to reset the NVRAM on your Mac.

    See you soon.

  • HP Pavilion AIO 23-q010in: get the drive recovery during the warranty

    One of reinstall drive does not... so get another set drive recovery during the warranty period...?

    You will need to contact HP directly to get an answer to this question.

    @VENKAT_RAAJ

    The web supports the portal for your desktop PC is at the following ADDRESS.

    https://support.HP.com/in-en/contact-HP/product/HP-Pavilion-23-q000-all-in-one-desktop-PC-series-%28Touch%29/7902091/model/7941017

    It is the support of equals forum and not a business unit of HP.

Maybe you are looking for