Illustrator 17.1 CC crashes at the start of any new installation on Mac running 10.6.8

Similar Questions

• After disk hard crash, loaded Windows 7 and get "Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations.

  Original title: Windows Vista product key used for any new installation.

  I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If you do not have your Windows Vista installation media, you can download a fresh copy:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).

  

  FF

• Date-time info - when the last time any new record is inserted in a table

  Hi all
  
  is it possible to get information from Date and time - when the last time any new record is inserted in a table without triggers...?
  
  Thanks in advance.
  / Shakeel

  Hello

  user11981535 wrote:
  is it possible to get information from Date and time - when the last time any new record is inserted in a table without triggers...?

  Insert only, I don't think it's possible.
  But you can ora_rowscn pseudo-column and scn_to_timestamp the user function to get the time when the table was modified last:

  Scott@my11g SQL>select scn_to_timestamp(max(ora_rowscn)) lstmod from t1;
  
  LSTMOD
  ---------------------------------------------------------------------------
  13-DEC-10 05.05.22.000000000 PM
  
  Scott@my11g SQL>update t1 set val='stuff' where id=1;
  
  1 row updated.
  
  Scott@my11g SQL>commit;
  
  Commit complete.
  
  Scott@my11g SQL>select scn_to_timestamp(max(ora_rowscn)) lstmod from t1;
  
  LSTMOD
  ---------------------------------------------------------------------------
  13-DEC-10 05.07.19.000000000 PM
  

  But I'm not wheither it is reliable to be used on the production database.

• Creative cloud programs crashing on the start screen.

  I got out of work Friday, sut down my computer and I come back Monday and most of my programs installed recently CC crash at startup.

  I'm on a Mac on 10.7.5

  That's how crash programs:

  The creative application of cloud does not start

  Illustrator, Indesign crash on their splash screen - just suspended programs where it is said to run the process to start...

  First, prelude and Speedgrade all try to bring it up to Adobe Application Manager that hangs and then, causing programs don't no pitching.

  Thant programs start no problem are Photoshop, After Effects, Bridge, and Lightroom.

  I can get the creative cloud to launch the toolbar, so I can't get updates or anything.

  So far, I have tried restarting the computer, repair disk permissions and by removing all preferences of adobe out of the library.

  So my question is what is the next step for this race?

  As a side note, I can't connect to the forum without disconnecting and empty my cache, and only in the Safari - browser everything just go to a redirection loop.

  Nevermind, I fixed it myself.

  Thanks for nothing Adobe are supported.

• 15 Firefox crashing at the start of the command line in Windows 15

  I was loading my workspace through a batch file every day for 4 years.

  This is one of the apps that I start Firefox using the following command:
  
  @start /D "C:\Program Files\Mozilla Firefox\" firefox.exe

  My batch file run and close without problem.

  Update Firefox 15, using the same order now links Firefox to the console.
  When I close the console, the closing of Firefox, when I open again since the standard shortcut, I have the "Firefox crashed.

  I also noticed that since the upgrade to Firefox 15, some calls to console.log go in the Console Windows while firefox is loading. In particular, is HTTPSEverywhere.

  When I drove back to 14 of Firefox, the problem disappeared

  As a temporary workaround, you can change the startup command to create a new command shell and run Firefox from this command interface. The following command will do what you need:

  Start "TempShell" / d "C:\Program Files\Mozilla Firefox" /B "CMD /C start""Firefox" "firefox.exe".
  
  
  

  NOTE: Thunderbird 15 also has the same problem... and the same workaround.

• Firefox crashes at the start even in safe mode after upgrade to version 7.0.1

  Firefox crashes on startup after upgrade to version 7.0.1

  It hangs at the start even in safe mode.

  I tried a complete uninstall and reinstall, but choose to keep all my settings (e.g. bookmarks) etc that I don't want to lose my favorites.

  Your crashreport is
  
  https://crash-stats.Mozilla.com/report/index/BP-24b848e4-7d2a-4cf1-B0B0-31ccd2111021
  
  Report of Crash Firefox 7.0.1 [@ mozcomp.dll@0xab51]
  
  Crash start-up mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V - GO, IBM Tivoli Access Manager SSO
  
  See Bug 680927 for more information
  
  The problem likely is the use of some software Oracle etc., the Oracle Developer being aware of the problem and working on a fix. Meanwhile, there is a hack for registration as a potential solution, or the simpler solution of temporary demotion to firefox 3.6.23.

• Firefox 7.0.1 crashes at the start of the application

  I'm going through Firefox 5.0.1 for 7.0.1. The update installs successfully, but it does not start. It blocks whenever it opens. I can reinstall 5.0.1 and it will work. While working 5.0.1 I removed all plugins and then upgraded to 7.0.1. Still, it crashes when the application starts. I also go add/remove programs via the Control Panel completely removed Windows Firefox and even deleted the installation directory. I then tried to do a completely new installation in a different installation directory, and still, it hangs at startup.

  See:

  • bug 680927 NEW crash of start-up mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V - GO, IBM Tivoli Access Manager SSO

• Photos crashes at the start of the App

  OS X Photos falls down in a few seconds after I open it

  I am sure that the problem is specific to this library, as two other libraries of Photos I charge upward without crashing or any other question

  I had enough time to play with some preferences before accidents, such as the photo stream and iCloud sharing power. Unfortunately, none of this makes a difference. Ive tried to fix the library, start in Safe Mode, reset the PRAM and NVRAM, erase all caches related Photos user/library/containers to issue records, even to reinstall OS X in the hope that it was an app - none of this has made a difference.

  Before it is suggested, I am fully aware that you can open the library package, enter full of photo files folders and drag them all to a new library empty. If it's preventable, I really want to do. My current library contains more 50 000 photos, many have been published. Moving to through would be thorough and above all, I would lose the links between original/editing photos, much metadata, etc. - which are too important to sacrifice, if there is actually a way to fix the library

  I've seen other users showing similar problems with their own libraries, but none of them apply to mine. Many of their problems have been resolved with updates, which did not help to solve my problem. I hope someone knowing a lot more technical that me can help to understand this

  Measurements:

  MacBook Pro 13 "(2012)"

  OS X El Capitan 10.11.4

  8 GB RAM

  Double 2.9 GHz Intel

  Here is the original section of the crash report:

  Process: Photos [1043]

  Path: /Applications/Photos.app/Contents/MacOS/Photos

  ID: com.apple.Photos

  Version: 1.5 (370.42.0)

  Generation information: PhotoApp-370042000000000 ~ 1

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Officials: Photos [1043]

  User ID: 501

  Date/time: 20:52:35.260 2016-04-02 + 0100

  OS version: Mac OS X 10.11.4 (15E65)

  Report Version: 11

  Anon UUID: 886464CE-91C1-206B-CDDA-A024D4AB9B99

  Time since started awake: 21000 seconds

  Integrity of system protection: enabled

  Crashed thread: the queue on the 13 expedition: com.apple.faces.GroupsManagerQueue

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  Saving photos of the Foundation:

  2016 04-02 20:52:21.220: alert notification of changes received: LiModelChangeGroup: 0x7ffa527234e0 > attention flags: full Replay (__59-[RKFaceChangesHandler startListeningForChangesFromMarker:] _block_invoke_2:173)

  termination with exception of type std::bad_alloc eception: std::bad_alloc

  Abort() called

  Global tracking buffer (second chronological reverse):

  5.077397 AppleJPEG 0x00007fff97df60fc [0x7ffa4ab84000] Options: 3264 x 2448 [FFFFFFFF, FFFFFFFF] 00025060

  5.077397 AppleJPEG 0x00007fff97df5fae [0x7ffa4ab84000] decoding: C0 0x0CC00990 0x00CC304A 0 x 22111100 1697260 0x00000000

  5.078165 AppleJPEG 0x00007fff97df505e [0x7ffa4ab84000] created session

  AppleJPEG 0x00007fff97df5a11 [0x7ffa4ab84000] 6.404934 releasing session

  6.461166 AppleJPEG 0x00007fff97df811c [0x7ffa4ab84000] decoding completed without errors

  7.753534 AppleJPEG 0x00007fff97df60fc [0x7ffa4ab84000] Options: 3264 x 2448 [FFFFFFFF, FFFFFFFF] 00025060

  Here is a copy of threads 13, mentioned in the crash report:

  Wire 13 crashed: dispatch queue: com.apple.faces.GroupsManagerQueue

  0 libsystem_kernel.dylib 0x00007fff92c13f06 __pthread_kill + 10

  1 libsystem_pthread.dylib 0x00007fff9bd494ec pthread_kill + 90

  2 libsystem_c.dylib 0x00007fff8b73c6e7 demolition + 129

  3 libc ++ abi.dylib 0x00007fff97e88f81 abort_message + 257

  4 libc ++ abi.dylib 0x00007fff97eaea2f default_terminate_handler() + 243

  libobjc 5. A.dylib 0x00007fff9d1e44a6 _objc_terminate() + 124

  6 libc ++ abi.dylib 0x00007fff97eac19e std::__terminate (void (*) ()) + 8

  7 libc ++ abi.dylib 0x00007fff97eac213 std::terminate() + 51

  8 libdispatch.dylib 0x00007fff8ede241f _dispatch_client_callout + 28

  libdispatch.dylib 9 0x00007fff8edf51f9 _dispatch_after_timer_callback + 77

  10 libdispatch.dylib 0x00007fff8ede240b _dispatch_client_callout + 8

  11 libdispatch.dylib 0x00007fff8edf2675 _dispatch_source_latch_and_call + 2235

  12 libdispatch.dylib 0x00007fff8ede6a83 _dispatch_source_invoke + 983

  13 libdispatch.dylib 0x00007fff8ede7200 _dispatch_queue_drain + 1207

  14 libdispatch.dylib 0x00007fff8eded707 _dispatch_queue_invoke + 549

  15 libdispatch.dylib 0x00007fff8ede5d53 _dispatch_root_queue_drain + 538

  16 0x00007fff8ede5b00 _dispatch_worker_thread3 + 91 libdispatch.dylib

  17 libsystem_pthread.dylib 0x00007fff9bd464de _pthread_wqthread + 1129

  18 libsystem_pthread.dylib 0x00007fff9bd44341 start_wqthread + 13

  Wire 13 crashed with X 86 State of Thread (64-bit):

  Rax: 0 x 0000000000000000 rbx: 0000000000000006 rcx 0 x: 0 x 0000700000634678 rdx: 0 x 0000000000000000

  RDI: 0x000000000000b703 rsi: 0 x 0000000000000006 PBR: RER 0x00007000006346a0: 0 x 0000700000634678

  R8: 0 x 0000000000000004 r9: 0x00007fff97eafa53 r10: 0x000000000c000000 r11: 0 x 0000000000000206

  A12: 0 x 0000700000634800 r13: 0 x 0000000113401300 r14: r15 x 0 0000700000635000: 0x00007000006346e0

  RIP: 0x00007fff92c13f06 rfl: 0 x 0000000000000206 cr2: 0x000000011a2b7710

  Logical CPU: 0

  Error code: 0 x 02000099

  Trap number: 133

  Thanks in advance for any comments, as everyone can offer

  Crashed thread: the queue on the 13 expedition: com.apple.faces.GroupsManagerQueue

  It could be related to faces and thumbnails.  This gives a test:

  1 - Make sure you have a current backup of the library.

  2 - Open the library package

  

  3 identify and move all the contents of the folder thumbnails to the trash in the Dock.

  4 - Open the problem with pictures library and check for any what improvement.

  This was first posted by jetsam user in this topic to troubleshoot issues with faces: faces do not display icon photo might work for your problem.

  
  

  
  

  jatsad 

  30 March 2016 00 h 36

  in response to leonie

  Hey Leonie,

  I tried the rotation back, and while he was working for as much as the thumbnails go, all the position of face recognition were all moved and non-aligned next to the face. So I decided to try something else.

  A backup copy of the library and then selected in first Show Package Contents after right-clicking on the library. Then, I deleted everything under the thumbnails folder. All the thumbnails have been then regenerated successfully.

  Much simpler and less time consuming than the rotation method.

  

• First Pro CC 2014 crashing at the start of the application, exhausted solutions?

  I've seen similar bugs offered for this but I tried everything to nothing does not.

  Version of the CC 2014 body crashes at startup, just after the start screen.  Wrong to the actual application, just instantly white outside with "Adobe Premiere Pro CC 2014.0 has stopped working".   Here is the log for details of the problem of Windows:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Adobe first Pro.exe

  Application version: 8.0.1.21

  Application timestamp: 53c7b17f

  Fault Module name: dvaui.dll

  Fault Module Version: 8.0.1.21

  Fault Module Timestamp: 53 c 76970

  Exception code: c0000005

  Exception offset: 00000000002f4e39

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Additional information 1: 4 d 34

  More information 2: 4d34d3a7ae19b5763432cd60b19af792

  3 more information: 0fe8

  Additional information 4: 0fe86a744bc3a8e89178eceb53cd1d4c

  I received the advice of others and uninstalled agency CC 2014, rebooted, update my records from Nvidia, rebooted, reinstalled agency CC 2014, rebooted, tried to run the application, but same accident persists.  Others also said something about changing permissions for 'something';  I tried to change the permissions for the cache folder that I use but not sure how effective it is, or what to change EXACTLY for permissions, IF this is the problem.

  Any advice, experience with this problem, or discussion would be appreciated.  Thank you!

  ----------

  LAST UPDATE 27/07/14

  Uninstalled all Creative Cloud components / applications completely, used Adobe CC cleaning tool to remove the cloud remains.  Reinstalled only agency and Media Encoder 2014 and same thing for the body, instantly hangs at startup.  I, however, had a few interesting weird encoder errors and failures during his installation through creative cloud desktop.  Here are some pictures of the error log:

  

  I feel that something is wrong from the start, perhaps something within dynamiclink that crashes body / gives also install errors to encode.

  Any help or thoughts are appreciated!

  LAST UPDATE ON 28-07-14

  
  

  Suggestions of preferences is, indeed, where was the problem. In my case, there was a Premiere Pro Preferences file which was in conflict with a folder of pref anterior body under Windows 7 Sync Center. I guess that's the equivalent of Windows preferences Mac questions, so be sure to check if you have synchronization conflicts, I guess, lol. Hope this helps anyone with similar problems out there!

• After the awakening of the mode standby, Thunderbird crashes if the start menu of windows 10 is open RESOLVED in version 38.3.0

  If I have Thunderbird up and then I put windows in sleep mode, when I come back once again, the start menu in Windows 10 appears automatically (can someone tell me how to stop this?). If I click anywhere on the screen menu start disappears and everything works fine, but if I forget to do it and for example, double-click on an email to open it, Thunderbird and then freezes. If I close Thunderbird and re-open he, she, then it brings up the email that I had clicked on, so he must have tried to open it while it was frozen.
  This isn't a big problem, just annoying bloom. Don't know if it's a problem of Windows 10 or Thunderbird. If someone can tell me how to stop start menu from popping up automatically, it wouldn't solve the problem, but it would be at least!

  Version 38.3.0 is now available. Resolve the problem?

• Firefox crashed at the start even in safe mode after update 18.0.1

  I open it and it instantly blocks mode even so ive scanned my pc for viruses malware spyware and all that jazz, but nothing was found

  Please use the other scanners listed so cor - el. If after you run them and restart your PC, please manually search your computer (including hidden files) yezmbsrz.dll.

  Also, click on the Start button, type msconfig, press on enter and go to the startup. Find the file and uncheck the checkbox next to it. Also, you should be able to see the location of the file that the file is a store in to remove it.

• Firefox crashes at the start even in safe mode: bp-b33e45b5-9197-4fc1-ba29-888042121222

  Open on Firefox and saw a button, restart to update. (I was 17-point-something version thing. I clicked on it and got an instance of the crash reporter. Since then, any attempt to open firefox results to the crash reporter. Firefox screens do not appear. Tried the mode without failure in now shift, same result. I use a non-administrator Windows ID, I tried with a different non-admin and sysadmin ID, everyone gets reported crash when I try to open firefox. Next step is to remove and reinstall firefox, step once this be to switch to chrome.

  17.0.1 removed and reinstalled my sysadmin do. came ok.
  passed to the limited id where I do all my work and had an accident. different of front - instead of journalist crash screen offered to reopen in safe mode. I've tried safe mode, it worked. I disabled all add-ins and extensions and restarted - OK.

  you have a lot of work to catch up now. When I get the chance I'll reactivate addins and extensions one at a time and report what is happening.

• HP Proliant crashes at the start for 30 minutes on the HPVSA module

  Hello everyone, we have a ProLiant ML350e Gen8 v2 and even since the start-up of the plant and then it blocks literally 30 minutes after it says on the disc bootable "loading module hpvsa...". »

  This server has a system of raid on board the B120i

  

  2015-12 - T 02, 13: 27:17.287Z cpu2:33178)loading module hpvsa...

  2015-12 - T 02, 13: 27:17.290Z cpu2:33178) Elf: 1865: module hpvsa a proprietary license

  2015-12 - T 02, 13: 27:17.328Z cpu2:33178) bunch of module: initial heap size: 16777216, max heap size: 76865536

  2015-12 - T 02, 13: 27:17.328Z cpu2:33178) vmklnx_module_mempool_init: Mempool max 76865536 used for the module: 4163

  2015-12 - T 02, 13: 27:17.328Z cpu2:33178) vmk_MemPoolCreate passed to 4096 pages

  2015-12 - T 02, 13: 27:17.328Z cpu2:33178) bunch of module: using memType 2

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) module heap vmklnx_hpvsa: creation succeeded. ID = 0x430352b9f000

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) PCI: driver hpvsac looking for devices

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) PCI: driver claimed hpvsac device 0000:02:00.0

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) PCI: driver hpvsac claimed 1 device

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) PCI: driver hpvsa looking for devices

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) alloc_hba_structure: board_id = 0 x 481590

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) alloc_hba_structure: board_id = 0x5f1590

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) DMA: 646: DMA engine ' vmklnxpci - 0:2:0.0' created using the Mapper "DMANull."

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) DMA: 646: DMA engine ' vmklnxpci - 0:2:0.0' created using the Mapper "DMANull."

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178)hpvsa_cache_pci_init: using 64-bit DMA

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) IntrCookie: 3625: vector of cookie 0 x 17 0 x 74

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) IntrCookie: 3625: vector of cookie 0x18 0 x 75

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) VMK_PCI: 723: 0000:02:00.0 device allocated 2 interruptions MSIX

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) MSIX enabled for dev 0000:02:00.0

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) IntrCookie: 1915: cookie 0 x 18 moduleID 4110 <hpvsa1> exclusive, flags 0 x 25

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) IntrCookie: 1915: cookie 0 x 17 moduleID 4110 <hpvsa1> exclusive, flags 0 x 25

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178)hpvsa_cache_pci_init: had another irq 16 for msix vector 0

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178)hpvsa_pci_init: initialized cache controller

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178)hpvsa: subsystem vendor id [1590]

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178)hpvsa: subsystem device [48]

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) to MSI for dev 0000:00:1f.2

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) IntrCookie: 3625: vector of cookie 0x19 0 x 32

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) VMK_PCI: 723: device allocation 0000:00:1f.2 1 interruption MSI

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) DMA: 646: DMA engine ' vmklnxpci - 0:0:31.2' created using the Mapper "DMANull."

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) DMA: 646: DMA engine ' vmklnxpci - 0:0:31.2' created using the Mapper "DMANull."

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178)hpvsa_pci_init: using 64-bit DMA

  2015-12 - T 02, 13: 27:17.329Z cpu2:33178) IntrCookie: 1915: cookie 0 x 19 moduleID 4110 <hpvsa0> exclusive, flags 0 x 25

  2015-12 - T 02, 13: 27:17.331Z cpu2:33178)hpvsa: Write Cache: memory bar 64-bit

  2015-12 - T 02, 13: 27:17.340Z cpu2:33178)hpvsa_init_two: h-> cfgtable-> Max_SG_Elements = 0

  2015-12 - T 02, 13: 27:17.340Z cpu2:33178)hpvsa_init_two: h-> cfgtable-> Max_SG_Elements = 32

  2015-12 - T 02, 13: 27:17.655Z cpu3:32814) NetPort: 1780: disabled port 0 x 2

  2015-12 - T 02, 13: 27:17.655Z cpu3:32814) Uplink: 7316: enabled port 0 x 2 with mac 9 c: b6:54:0f:00:cc

  2015-12 - T 02, 13: 27:17.655Z cpu2:32867) CpuSched: 596: latency user 32867 0 helper24-3 modified by 32867 helper24-3-6

  2015-12 - T 02, 13: 27:17.655Z cpu2:32867) CpuSched: 596: latency user 32867 helper24-3-6 modified by 32867 0 helper24-3

  2015-12 - T 02, 13: 27:17.679Z cpu1:33078) < 6 > usb 1-1: suspended

  2015-12 - T 02, 13: 27:17.679Z cpu1:33078) < 6 > usb 1-1: suspended

  2015-12 - T 02, 13: 27:20.659Z cpu0:33077) < 6 > usb usb1: suspended

  2015-12 - T 02, 13: 27:20.659Z cpu0:33077) < 6 > usb usb1: suspended

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) created the fw flash drive hpvsactl, major 239

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) set_config_data: max_commands: 256 maxsgentries 32

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) created the character device hpvsa0, major 238

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178)hpvsa_register_controller spent

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) < 4 >hpvsa_register_scsi_host: transport SAS functions are not supported for the controller.

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) LinPCI: LinuxPCI_DeviceIsPAECapable:581: device capable of EAP at 0000:00:1f.2

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) VMK_PCI: 392: 0000:00:1f.2 device name: vmhba1

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) DMA: 646: DMA "vmhba1" engine, created using the Mapper "DMANull."

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) < 4 >hpvsa: hpvsa_initial_update_scsi_devices: DEBUG: Start A scan. Abandon the initial update_disk_devices.

  2015-12 - T 02, 13: 28:17.459Z cpu0:33178) Survey Manager record

  2015-12 - T 02 13:29: 46.242Z cpu2:33181) DEBUG AFFIRM: returnLength == requestLength =vmkdrivers/src_9/drivers/hpvsa/hpvsa/hal_ibanez/hal_i2c.c function = print_i2c_info line = 1438 file

  2015-12 - T 02, 13:52:22.735Z cpu0:33178)hpvsa: hpvsa_do_report_ext_phys_luns: buf contains identifiers of SAS WWID of 8 bytes.

  2015-12 - T 02, 13: 52:22.749Z cpu0:33178) < 4 >hpvsa: hpvsa_verify_sas_wwid: controller provided no legitimate SAS WWID. Using the default 0x500508b101010101 ID.

  2015-12 - T 02, 13: 52:22.771Z cpu2:33178)hpvsa0: scsi found 2 device (s)

  2015-12 - T 02, 13: 52:22.771Z cpu2:33178)hpvsa: number of DVDs found 1

  2015-12 - T 02, 13: 52:22.796Z cpu2:33178)hpvsa0: found disc [type = 0]

  2015-12 - T 02, 13: 52:22.832Z cpu2:33178)hpvsa0: found disc [type = 0]

  2015-12 - T 02, 13: 52:22.862Z cpu2:33178)hpvsa0: optical device found [type = 5]

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178)hpvsa0: controller found [type = 12]

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178) addinghpvsa0 Direct access device. [0000004000000000]

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178)hpvsa0: Direct access unit added (b0t0l0).

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178) addinghpvsa0 Direct access device. [0100004000000000]

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178)hpvsa0: unit Direct access added (b0t0l1).

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178)hpvsa0 CD-ROM addition of device. [0000000000000401]

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178)hpvsa0: unit CD-ROM added (b0t1l0).

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178) a RAID addition hpvsa0 device. [0000000000000000]

  2015-12 - T 02, 13: 52:22.868Z cpu2:33178)hpvsa0: added a RAID (b0t0l0) device.

  2015-12 - T 02, 13: 52:22.880Z cpu0:33178) ScsiScan: 1173: path 'vmhba1:C0:T0:L0': seller: "HP" model: "LOGICAL VOLUME" Rev: "5,00 '."

  2015-12 - T 02, 13: 52:22.880Z cpu0:33178) ScsiScan: 1176: path "vmhba1:C0:T0:L0": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  2015-12 - T 02, 13: 52:22.916Z cpu0:33178) ScsiScan: 1738: Add the path: vmhba1:C0:T0:L0

  2015-12 - T 02, 13: 52:22.916Z cpu0:33178)hpvsa0: b0t0l0 added shost [0x43051b0746c0]

  2015-12 - T 02, 13: 52:22.928Z cpu0:33178) ScsiScan: 1173: path 'vmhba1:C0:T0:L1': seller: "HP" model: "LOGICAL VOLUME" Rev: "5,00 '."

  2015-12 - T 02, 13: 52:22.928Z cpu0:33178) ScsiScan: 1176: path "vmhba1:C0:T0:L1": Type: 0 x 0, rev ANSI: 5, TPGS: 0 (none)

  2015-12 - T 02, 13: 52:22.964Z cpu2:33178) ScsiScan: 1738: Add the path: vmhba1:C0:T0:L1

  2015-12 - T 02, 13: 52:22.964Z cpu2:33178)hpvsa0: b0t0l1 added shost [0x43051b0746c0]

  2015-12 - T 02, 13: 52:22.964Z cpu2:33178)hpvsa: queue ODD 1 depth adjustment

  2015-12 - T 02, 13: 52:22.977Z cpu0:33178) WARNING: LinScsiLLD: scsi_add_device:1478: failed to add the device on the channel = 0, id = 1, lun = 0

  2015-12 - T 02, 13: 52:22.977Z cpu0:33178)hpvsa0: scsi_add_device of b0t1l0 failed.

  2015-12 - T 02, 13: 52:22.977Z cpu0:33178)hpvsa0: b0t0l0 added shost [0x43051b0746c0]

  2015-12 - T 02, 13: 52:22.977Z cpu0:33178) vmlnx scsi ioqueues returns 0, used max_queue_val 24

  2015-12 - T 02, 13: 52:22.977Z cpu0:33178) ioqueues registration failed

  2015-12 - T 02, 13: 52:22.987Z cpu0:33178)hpvsa - raidstack version: 5.00 C

  2015-12 - T 02, 13: 52:22.987Z cpu0:33178) PCI: driver claimed hpvsa device 0000:00:1f.2

  2015-12 - T 02, 13: 52:22.987Z cpu0:33178) PCI: driver hpvsa claimed 1 device

  2015-12 - T 02, 13: 52:22.987Z cpu0:33178) ScsiNpiv: 1505: GetInfo for adapter vmhba1, [0x43017ab2c3c0], max_vports = 0, vports_inuse = 0, linktype = 0, status = 0, failreason = 0, m = bad0020

  2015-12 - T 02, 13: 52:22.987Z cpu0:33178) Mod: 4942: initialization of hpvsa succeeded with module ID 4163.

  2015-12 - T 02, 13: 52:22.987Z cpu0:33178)hpvsa successfully loaded.

  ______________________________END OF CUT LOG____________________________________________

  We tried several versions of the driver of hpvsa and various VMware for HP ISO

  VMware-ESXi-5.5.0-Update2-2403361-HP-550.9.2.30.9-Mar2015.iso

  VMware-ESXi-6.0.0-2494585-HP-600.9.3.20-Jun2015.iso

  VMware-ESXi-6.0.0-2494585-HP-600.9.3.30.2-Jun2015.iso

  VMware-ESXi-6.0.0-Update1-3029758-HP-600.U1.9.3.5-Oct2015.iso

  It is the latest iso, we used and continues to do 30 minutes of delay.

  VMware-ESXi-6.0.0-Update1-3073146-HP-600.9.4.34-Nov2015.iso

  Even with this vmware plain without drivers hp. The thing about it is that it does not hpvsa so the disc appear separated (without raid).

  VMware-VMvisor-Installer - 6.0.0 - 2494585.x86_64.iso

  
  

  We asked HP for the new motherboard and it has the same fails.

  Could someone give us an idea how to solve this problem?

  Hello everyone THANKS FOR all the answers. I think I found the solution for this mess

  Without any change on the raid as it was the first time after the installation ISO following the delay went up to 5-7 minutes hpvsa loading.

  The final time are:

  Tiny aprox 0 to 2 server load HP Bios Post etc.

  Of the minute 2 to 9 esxi 5.1.0 (update 0) attention to expenses hpvsa flat again about 5-7 minutes

  at the time of the VMS all 10 or 14 load very well.

  --->>>VMware-ESXi-5.1.0-799733-HP-5.34.23<>

  ------------------------------------------------------

  This is the list of the sweet as claimed by vmware

  Misc-cnic-register Broadcom VMwareCertified

  NET-bnx2 Broadcom VMwareCertified

  NET-bnx2x Broadcom VMwareCertified

  NET-cnic Broadcom VMwareCertified

  NET-tg3 Broadcom VMwareCertified

  SCSI-bnx2fc Broadcom VMwareCertified

  SCSI-bnx2i Broadcom VMwareCertified

  SCSI-bfa Brocade VMwareCertified

  IMA-be2iscsi Emulex VMwareCertified

  NET-be2net Emulex VMwareCertified

  SCSI-be2iscsi Emulex VMwareCertified

  SCSI-lpfc820 Emulex VMwareCertified

  char-hpcru HP PartnerSupported

  tank-hpilo Hewlett-Packard PartnerSupported

  Hewlett-Packard HP - ams PartnerSupported

  Hewlett-Packard HP-construction PartnerSupported

  Hewlett-Packard HP-smx-provider VMwareAccepted

  hpacucli Hewlett-Packard PartnerSupported

  hpbootcfg PartnerSupported of Hewlett-Packard

  hponcfg PartnerSupported of Hewlett-Packard

  SCSI-hpsa Hewlett-Packard VMwareCertified

  SCSI-hpvsa Hewlett-Packard PartnerSupported

  VMware-esx-hp_vaaip_p2000 HP VMwareAccepted

  NET-igb Intel VMwareCertified

  NET-IGB Intel VMwareCertified

  mpt2sas-SCSI LSI VMwareCertified

  NET-mlx4-en Mellanox VMwareCertified

  IMA-qla4xxx QLogic VMwareCertified

  NET-qlcnic QLogic VMwareCertified

  QLogic VMwareCertified SCSI-qla4xxx

  NET-nx-nic VMware VMwareCertified

  HP hpnmi PartnerSupported

  Qlogic VMwareCertified SCSI-qla2xxx

  ----------------------------------------------------------------------------------

  IT IS THE RESULT OF A COMMAND LINE

  ~ # get the profile of software esxcli

  HP-ESXi - 5.1.0 - standard-iso

  Name: HP-ESXi - 5.1.0 - standard-iso

  Seller: Hewlett-Packard

  Creation date: 2015-12 - 09T 19: 08:01

  Date modified: 2015-12 - 11T 20: 26:52

  Loan without a State: false

  Description:

  Profile of customized HP for ESXi 5.1.0 ISO Image

  VIBs : ata-pata-amd 0.3.10-3vmw.510.0.0.799733, ata-pata-atiixp 0.4.6-4vmw.510.0.0.799733, ata-pata-cmd64x 0.2.5-3vmw.510.0.0.799733, ata-pata-hpt3x2n 0.3.4-3vmw.510.0.0.799733, ata-pata-pdc2027x 1,0-3vmw.510.0.0.799733, ata-pata-serverworks 0.4.3-3vmw.510.0.0.799733, ata-pata-sil680 0.4.8-3vmw.510.0.0.799733, ata-pata-via 0.3.3-2vmw.510.0.0.799733, bloc-cciss 3.6.14-10vmw.510.0.0.799733, char-hpcru 5.0.3.09-1OEM.500.0.0.434156, char-hpilo 500.9.0.0.9-1OEM.500.0.0.434156, ehci-ehci-hcd 1,0-3vmw.510.0.0.799733, esx-base 5.1.0-0.0.799733, esx-dvfilter-générique-fastpath 5.1.0-0.0.799733, esx-tboot 5.1.0-0.0.799733, esx-xlibs 5.1.0-0.0.799733, esx-xserver 5.1.0-0.0.799733, hp-ams 500.9.3.0-13.434156, hp-build 5.34.23-434156, hp-smx-fournisseur 500.03.02.00.23-434156, hpacucli 9,40-12,0, hpbootcfg 01-01.02, hpnmi 2.0.11-434156, hponcfg 04-00.10, IMA-be2iscsi 4.2.324.12-1OEM.500.0.0.472629, ima-qla4xxx 500.2.01.31-1vmw.0.0.060523, ipmi-ipmi-devintf 39,1-4vmw.510.0.0.799733, ipmi-ipmi-msghandler 39,1-4vmw.510.0.0.799733, ipmi-ipmi-TR-drv 39,1-4vmw.510.0.0.799733, misc-cnic-register 1.72.1.v50.2-1OEM.500.0.0.472560, misc-pilotes 5.1.0-0.0.799733, net-be2net 4.2.327.0-1OEM.500.0.0.472560, 2.2.3e.v50.1-1OEM.500.0.0.472560 net-bnx2, net-bnx2x 1.74.17.v50.1-1OEM.500.0.0.472560, 1.74.04.v50.1-1OEM.500.0.0.472560 net-cnic, net-e1000 8.0.3.1-2vmw.510.0.0.799733, net-e1000e 1.1.2-3vmw.510.0.0.799733, 1.4.2.15a-1vmw.510.0.0.799733 net-enic, net-forcedeth 0,61-2vmw.510.0.0.799733, net-igb 4.0.17-1OEM.500.0.0.472560, net-IGB 3.11.32-1OEM.500.0.0.472560, net-mlx4-fr 1.6.1.2-1OEM.500.0.0.406165, net-nx-nic 5.0.626-3vmw.500.0.0.472560, net-qlcnic 5.0.750-1OEM.500.0.0.472560, net-r8168 8.013.00-3vmw.510.0.0.799733, 6.011.00-2vmw.510.0.0.799733 net-r8169, net-s2io 2.1.4.13427-3vmw.510.0.0.799733, net-sky2 1.20-2vmw.510.0.0.799733, net-tg3 3.124c.v50.1-1OEM.500.0.0.472560, 1.1.3.0-3vmw.510.0.0.799733 net-vmxnet3, ohci-usb-ohci 1.0-3vmw.510.0.0.799733, sata-ahci 3,0-13vmw.510.0.0.799733, ata-sata-piix 2,12-6vmw.510.0.0.799733, nv-sata-sata 3,5-4vmw.510.0.0.799733, sata-sata-promesse 2,12-3vmw.510.0.0.799733, sata-sata-sil 2,3-4vmw.510.0.0.799733, sata-sata-sil24 1,1-1vmw.510.0.0.799733, sata-sata-svw 2.3-3vmw.510.0.0.799733, 1.1.5.1-9vmw.510.0.0.799733 scsi-aacraid, scsi-adp94xx 1.0.8.12-6vmw.510.0.0.799733, scsi-aic79xx 3.1-5vmw.510.0.0.799733, scsi-be2iscsi 4.2.324.12-1OEM.500.0.0.472629, 3.0.0.0-1OEM.500.0.0.406165 scsi-bfa, scsi-bnx2fc 1.74.02.v50.2-1OEM.500.0.0.406165, scsi-bnx2i 2.74.07. V50.1-1OEM.500.0.0.472560 1.5.0.3-1vmw.510.0.0.799733 scsi-PNI, scsi-hpsa 5.0.0-40OEM.500.0.0.472560, scsi-hpvsa 5.0.0-50OEM.500.0.0.472560, scsi-ips 7.12.05-4vmw.510.0.0.799733, scsi-lpfc820 8.2.4.141.55-1OEM.500.0.0.472560, 2.20.5.1-6vmw.510.0.0.799733 scsi-megaraid-mbox, scsi megaraid sas 5.34-4vmw.510.0.0.799733, scsi-megaraid2 2.00.4-9vmw.510.0.0.799733, scsi-mpt2sas 13.10.02.00.1vmw-1OEM.500.0.0.472560, scsi-mptsas 4.23.01.00-6vmw.510.0.0.799733, scsi-mptspi 4.23.01.00-6vmw.510.0.0.799733, scsi-qla2xxx 934.5.6.0-1OEM.500.0.0.472560, scsi-qla4xxx 634.0.5.0-1OEM.500.0.0.472560, 2.0.2.0088-1vmw.510.0.0.799733 scsi-rste, outils-lumière 5.1.0-0.0.799733, uhci-usb-uhci 1,0-3vmw.510.0.0.799733, vmware-esx-hp_vaaip_p2000 2.1.0-2

  HOPE THIS HELPS SOMEONE ELSE. THIS PROJECT HAS LED ME AJAJJAJAJ MAD

• Update of Lightroom 5.7 on my Mac installs ok, but then crashes at the start of the application

  I managed to install 5.7 LR on top of my existing installation of 5.6, but then, at startup, the application crashes with the following error message

  Any ideas?

  Cheers, Alex

  Process: Adobe Photoshop Lightroom 5 [645]

  Path: / Applications/Adobe Photoshop Lightroom 5.app/Contents/MacOS/Adobe Lightroom Photoshop 5

  ID: com.adobe.Lightroom5

  Version:?

  Code type: X 86-64 (Native)

  Parent process: launchd [155]

  Responsible for: Adobe Photoshop Lightroom 5 [645]

  User ID: 501

  Date/time: 22:50:16.935 2014-11-19 + 0100

  OS version: Mac OS X 10.9.5 (13F34)

  Report Version: 11

  Anonymous UUID: 800C35BF-38E6-B19C-E0D6-270BE38D4737

  Crashed thread: 0

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  Dyld error message:

  Library not loaded: @executable_path /... / Frameworks/stand. Framework/versions/a/stand

  Referenced from: / Applications/Adobe Photoshop Lightroom Photoshop Lightroom 5 5.app/Contents/MacOS/Adobe

  Reason: image not found

  Binary images:

  0x7fff6bc0d000 - 0x7fff6bc40817 dyld (239.4) < 7AD43B9B-5CEA-3C7E-9836-A06909F9CA56 >/usr/lib/dyld

  0x7fff8a83f000 - 0x7fff8ab3fff7 com.apple.Foundation /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation < 24349208-3603-3F5D-95CC-B379616FBEF8 > (6: 9 - 1056.16)

  0x7fff8be28000 - 0x7fff8c99eff7 com.apple.AppKit /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit < 9DC13B27-841D-3839-93B2-3EDE66157BDE > (6, 9 - 1265.21)

  Model: MacBookPro7, 1, MBP71.0039.B0B of BootROM, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, MSC 1.62f7

  Graphics card: NVIDIA GeForce 320 M, NVIDIA GeForce 320 M, PCI, 256 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x029E, 0x434D5341344758334D314131303636433720

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)

  Bluetooth: Version 4.2.7f3 14616, 3 services, 15 devices, 1 incoming serial ports

  Network service: Airport, AirPort, en1

  Serial ATA Device: ST2000LM003 HN-M201RAD, 2 TB

  Serial ATA Device: HL-DT-ST DVD - RW GS23N

  USB device: ISight built-in

  USB device: Memory card reader internal

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Apple keyboard / Trackpad

  Crush Bus:

  There is a problem with distinction uppercase / lowercase letters in the file to the library path. The partition of my drive has file names enabled, case-sensitive which is no doubt why it does not affect everyone.

  dyld is trying to load "@executable_path /... / Frameworks/asneu.framework/versions/a/asneu'." The actual path on the disk is ' / Applications/Adobe Photoshop Lightroom 5.app/Contents/Frameworks/asneu.framework/Versions/A/asneu.

  By renaming the 'Versions' directories 'versions' and 'A' and 'a', Lightroom was able to run. I did not test, so there could be other problems of case sensitivity.

• Crash of the database without any error

  Hello
  I asked this question of PL/SQL and they redirect me to this forum... hope I can get a solution... [Previous Thread of PL/SQL: http://forums.oracle.com/forums/thread.jspa?threadID=925433 & tstart = 0]
  
  Maybe I can start from the beginning and helps you understand what I'm trying to achieve...
  
  I am loading an XML file in a table called: table_b
  Table_B has a column called col_a which is of type CLOB... XML file is stored in col_a...
  
  I downloaded my XSL file using Oracle procedures, and then I want to use Oracle XDB functions to transform the XML file using the XSL type...
  
  OBJECTIVE: transform XML to another format...
  
  starting this pl:
  declare
  v_l clob.
  CLOB v_t;
  V_1 sys. XMLType;
  V_2 sys. XMLType;
  Start
  Select col_a v_l table_b where col_c = "value_d";
  
  -v_t: = DBMS_XDB. GETCONTENTCLOB('/home/XSL/Transf.xsl');
  
  V_1: = XMLType (v_l);
  -v_2: = XMLType (v_t);
  
  -dbms_output.put_line (substr (v_t, 1, 900));
  dbms_output.put_line (substr (v_l, 1, 900));
  
  end;
  /
  
  -Error in this line and causes the database to crash without error
  V_1: = XMLType (v_l);
  
  Description of the table, I select the values of:
  
  describe table_b;
  
  Name of Type Null
  -col_c VARCHAR2 (3)
  col_a CLOB()
  
  Thanks Alex for your time; the answers to your question.
  Select * from version of v$.
  
  Oracle Database 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production
  PL/SQL release 11.1.0.6.0 - Production
  "CORE 11.1.0.6.0 Production."
  AMT for 64-bit Windows: Version 11.1.0.6.0 - Production
  NLSRTL Version 11.1.0.6.0 - Production
  
  hope you can follow and try to rebuild the image here... If you need information please... Thank you

  Just like your code, the Oracle database software is also code. So it will be contains bugs, like your code. At the point where we get the human factor, there's no bugs... so there is no need to 'shout '.

  If you have an ID customer support Oracle, you were able to connect to a request for priority service 1. Oracle will help you immediately (but you must also be on standby 24 hours...).

  A few reasons I can think that denies the database to write errors... (some issues I encountered during my 15 years while working with Oracle

  -Unplug the power of server cable
  -read only privileges on files and directories
  -a failure to disks, corrupt hard drive sectors
  -parameters for the wrong OS kernel / environment settings
  -the demon of background database hangs himself and therefore can save his own mistakes
  -etc...

  Apperently doesn't understand you all the details ("now, the problem is in this file because he had some references in there which made reference to a DTD and other XSL files... ") so your computer might be that your XML file is not well formed somewhere, perhaps due to the conversion of the data due to the settings of national language of the customer. If you use XMLTYPE, Oracle will check on XML wellformedness and if an XML schema or a reference is present, it will make an attempt to do a check against this information if it is available at the session / database. Just like, for example, a type of 'DATE' or 'NUMBER '. The content gets checked if it valid as a 'DATE' or 'NUMBER '.

  Spaces should also be analyzed and verified if this isn't the start of a character / item. All XML parsers / DOM methods will serialize and check the content in this way.

  I'm still using that you log an SR with Oracle Support. As Alex showed you, it should work at least he did in his old 9.2 database environment. There is more here than meets the eye...