Licenses - we continue to run out of them? But how?

Similar Questions

• My recovery D says that I'm running out of space. How do I free up space?

  My recovery D says that I'm running out of space. How to free space on D. I tried but doesn't seem to work. Any ideas out there. I don't download a lot of things and not use my computer a lot. Have had problems recently with memory. Could it be the problem?

  Hi Patio_karim,

  Try running disk clean up and remove unwanted system files and folders. Through disk cleanup, you can delete all the temporary files and folders that are not needed on your computer.

  1. open Disk Cleanup by clicking the Start button picture of the Start button, tap all programs, accessories, click System Tools, and then click Disk Cleanup.

  2. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If the disk cleanup: drive selection dialog box appears, select the hard disk you want to clean and then click OK.

  4. click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  5. When you have finished select the files you want to delete, click OK, and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

  Delete files using disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  You can also check out the link below for more options on the release of disk space on your computer.

  Strategies to free up disk space

  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space

• my computer continues to run out of virtual memory

  I deleted programs and defragged my computer.

  To make sure that we are talking about the same thing.

  Exactly how do you know that you run 'Virtual memory' specifically?

  Virtual memory is actually a 'swap file' specially allocated space on the hard drive. Most of the facilities have it set to automatically expand and shrink as needed. If freeing space on your hard disk and Defrag is reasonable.

  The amount of used and free space on the hard drive you have?

  You should also check the amount of virtual memory allocated.

  1. Open the 'System' using the shortcut dialog
  2. Notice how ' installed memory (RAM): "you have.

  3. Press or click on advanced system settings. You may be prompted for an administrator password or to confirm your choice.

  4. On the Advanced tab, under performance, tap or click settings.

  5. Press or click the Advanced tab, and then under virtual memory, press or click on modify.

  6. Claire runs it automatically the size of pagefile for all drives check box.

  7. Under drive [Volume label], tap or click the drive that contains the paging file that you want to change.

  8. Press or click Custom size, type a new size in megabytes in the initial size (MB) or maximum size (MB) box, type or click on set and then press or click OK.

  In general, the recommendations are that you should have 1 to 3 times your RAM memory allocated to virtual memory.   If I have enough free space on the hard drive, I personally prefer the size of the max and min even swap file.

  Originally, in the 1980s and the beginning of the 90s HD space is at a premium and so was RAM (I paid $5000 for my first computer with 2 MB RAM and 80 MB of free disk space!). It made sense to let the system allocate more swap file space according to the needs, and then free it up. But this approach also has the effect of fragmenting the HD.  Now ship computers with RAM that is literally orders of magnitude larger than at the time and so are HD, in fact, if you have lots of RAM, say more than 4 GB for a home user, I've seen some recommendations to minimize the size of the swap file. These same days budget computers come with more than enough disk space that continuously allocate enough virtual memory is not a constraint.

  If you set a constant pagefile size, it's probably a good idea to defragment the paging file too. This requires special tools to defragmentation.

  FYI: this is the wrong forum and category to ask this question. You should ask her in the Windows forum.

• MY D drive has run out of space. How can I change the allotted space?

  D drive is filled with HP recovery files.

  Hello

  You do not change the space allocated on your D: Recovery partition.

  Read this HP to solve your problem

  If it does not, contact HP

  «Error: low disk space.» You run lack of disk space on recovery (d :))"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01508532&LC=en&cc=us&DLC=en

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Read General information on D: Recovery partitions and what to do and what not to do with them

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  'Create a set of recovery disks operating system'

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#WhenCreate

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• Most of my files gone LR recently. I found them, but how to reincorporate them in LR?

  Note, I did not move the source files - there is no question where my files used to be. I just opened LR two days previously and found - to my horror - all but a handful of my files had disappeared.  I did a search of my files, and the first result was due for each individual photo counted 33 000 visits.  A search for "lightroom catalog" resulted in about 280 hits, which is a few records more that I actually had.  Another search for "lrc" resulted in 24 hits - which I guess is perhaps correct research, as most of my files were in only about 6 catalog entries.  In any case, assuming that the last result of research is that which needed me, how do their back in lightroom?

  > I do not understand the file "-> Open Recent.

  Menu 'File' in Lightroom. Select 'open recent '.

  > windows, search for "lightroom catalog" - each item has a set date

  Backup catalogs are (otherwise, you'd see no date). Find them in Solution Explorer and see if, in the folder level that exceeds the backups have a catalog file. Double-click that and Lightroom should open the correct catalog file.

  > There are three lists for 6/11, two small files (80 bytes and 2 MB) and a 16 GB

  The first is probably the lock file (.lock extension), the second is your catalog (appears very low, but must have the extension .lrcat) and the third is the database of the preview (extension .lrdata). The catalog file is far too small to contain several images. You accidentally deleted all the files, or you have created a new empty catalog (easier than it may seem to do completely by chance). You need to find the main real catalog file using 'open recent' or by copying one of the backup files on the catalog the high level and double clicking on that (when Lightroom is closed)

• 29 Firefox fails to come out properly and continues to run in the Task Manager.

  It is a continuation of a thread found here:
  https://support.mozilla.org/en-US/questions/997448 by Compumind.

  I pointed out that I had the same experience, especially at the opening of the email links in Thunderbird. I reported also that forced me to go back to 28 FF.

  Moses responded by top wire and suggested:
  (1) download a fresh installer of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) the release of Firefox.

  (3) rename the folder

  C:\Program Files (x 86) \Mozilla Firefox

  TO

  C:\Program Files (x 86) \OldFirefox

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  I followed these instructions carefully but no joy. When installing 29 FF, not only refused to leave (using "exit") and continue to run in the Task Manager up until I killed him after the opening of links in Thunderbird, but I find that he refused to come out after a simple navigation and links.

  Moses had asked that I didn't answer in the original thread, so I re-post here.

  In my view, that there is a serious bug. With Firefox 28... no problem don't except a minor that I have indicated here:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1002089

  Yet once I am obliged to 28 FF, although I miss the nice interface and security patches, I need to have a browser that works properly. My wife never even saw the Manager of the tasks before so that's the problem.

  In addition, "guesses" made with this post, the only other thing usual outside that I do, is to have a security policy about cookies (accept by default... I make exceptions for cookies I want to keep and have several that are "allow only for the session.") I also FF the value delete history of navigation at the exit, but that takes a fraction of a second.

  I look forward to when this matter can be addressed successfully and I am able to use 29 FF (and out properly... I can't wait for my wife to follow all of these instructions and it often close manually in the Manager of tasks... or what I want to do this.)

  Good luck for all Mozilla projects. Having installed 29 FF twice and then back return 28 twice, I'll wait and see how this plays out. Please don't send me the standard "start in safe mode", 'restart with disabled modules', 'reset Firefox' stuff (the last time that completely destroyed my browser). I don't think that is what is happening.

  Moses added that there is a problem with the e-mail notifications passing by, so take your time, friends.

  I think now (temporarily) this bug or problem has its roots in "history leaving Compensation."

  I made the leap after a few game with 29 PortableFirefox and reading the blog post linked here:

  [https://support.mozilla.org/en-US/que.../997918#answer-566755]

  .. .and installed 29 FF on my previous FF28 on my box. I unchecked the "clear history on exit" which was only to delete my history, not cookies or anything else, cor - el. My setting should not accept cookies unless I make an exception. Until the FF developers find a way to do this is functional, I'll just have to manually delete the history.

  Furthermore, John99, you want to maybe privacy.sanitize.sanitizeOnShutdown set to 'False', not 'true' If you want to stop the automatic deletion of the history at the exit (attempt).

  I've been running for about 6 hours. without experiencing the bug 'suspended '. So, I can live with that for now until this bug is fixed. It should be fixed... browsers are supposed to be able to do things like that.

  On the other hand, I could find things go wrong... but so far I'm not having a problem.

  I for several hours and will let you know later if things change.

  Kind regards

  Axis

• Hi all, I need to understand why my VMs will always grow so big they eventually run out of disk space, and then I can't resize them...

  Hi all, I need to understand why my VMs will always grow so large they finally running out of disk space, and then I can't resize them... see the screenshots below:

  

  So all my virtual machines are that looks like it's finally the 5 GB goes down to zero, cannot update things like Dropbox and all sorts of other things start to break. I then, go here and try to expand, but I get this error on machines to young readers:

  

  I think I need at least as much GBs on the system, as is the virtual machine? Done my MBA and smaller machines, is not possible. But when I move the virtual machine to a bigger machine like my iMac, with a big disc of TB, I can do the resizing. Is it the way it is supposed to work? Perhaps, I do not have this right...

  thx for all the advice!

  Yep, that's the way it is supposed to work.  The close, move it to the iMac, expand drive, then arrest him and bring him back.  Make sure you choose "move" not "copy" when migrating to avoid triggering the activation of windows.

  Regarding what is eating space inside the virtual machine, you will have to consider for the guest OS for more information (which are not a matter of merger).

  To free up space on the host, with closing VM, go to settings, click on the circle of little tiny refreshment next to the space bar, then if she said cleaning recommended, go into general and make a clean virtual machine.

• I want my pictures to download on my iCloud but I don't want all my previous photos on my phone because there are just a lot of space and I have run out of space. Can I disable sharing photos, but let it download photo stream to make it happen, or how I c

  I want my pictures to download on my iCloud but I don't want all my previous photos on my phone because there are just a lot of space and I have run out of space. Can I disable the download of photo sharing but allow for photo streams to make this or how can I make this happen? I just want to still my photos go to my Mac and iCloud so I can have my photos without danger...

  Thank you

  N °

  iCloud is a synchronization service, NOT off of storage of the unit.

  You could cut the phone out of sync from your library. Just move them to your Mac and synchronize your Mac with iCloud. Now, you'll have plenty of space on your phone, but no pictures.

  From your Mac, you can then make an album with photos that you want to access from your phone. This will require ongoing work, but will keep your clear phone in most of the time.

• Warranty runs out in 2 days. Can I get an extension?

  I have a Satellite L300-1AS, that I bought on December 28, 2008, I have a standard 1 year international warranty on which runs out in 2 days.
  I want to buy an extension for it, but first I'm not sure which warranty service is good for my model.
  My serial number is x8362426q. I am from the United Kingdom. I tried ringing but it's a Saturday and it's the day after Christmas.

  There is so many things I'm confused and get annoyed at this time.

  First of all, I'm guessing the virtual means I get my extension in line and that you don't have to wait for the post, which means that I can register for my warranty instantly before the expiration of my current warranty? I can't wait for a warranty CD to be mailed to me, because of course I have only 2 days before my warranty runs out and it's Christmas. S ' Please tell me if I'm wrong.

  Secondly,.

  When I enter my serial number and date on this purchase page: http://uk.computers.toshiba-europe.com/innovation/services_search.jsp?service=UK&oldOptionCategory=1 070696 & selOptionCategory = 1070696 & inputSerial = x 8362 426q & purchaseYear_1 = 2008 & purchaseMonth_1 = 12 & seDay_1 ach = 28 & Find + compatible + service = Find + compatible + service it says I can get the following four options:
  -Extended international warranty from 1 to 2 years (virtual)
  -Extended international warranty from 1 to 2 years for Toshiba Mini laptops (virtual)
  -Extended warranty from 1 to 3 years (virtual) International
  -Extended international warranty from 1 to 3 years for Toshiba Mini laptops (virtual)

  BUT WHEN I GO HERE

  http://UK.computers.Toshiba-Europe.com/innovation/generic/SUPPORT_PORTAL/ and enter my serial number, compatible services tab says I can't get the warranty from 1 to 3 years, not 1-2 years I want.

  WHY IT ME SAID TWO DIFFERENT THINGS? -.-

  Finally, me I'm even ELIGIBLE for a guarantee?
  http://UK.computers.Toshiba-Europe.com/innovation/JSP/individualServices.do?service=UK&action=SHOW_ATTRI BUTES & SelCategorie = 1070696 & oldCategory = 1070696 & hingId = 0 CMAT & OPTION_ID = 120135 & toshibaShop = true
  ↑ THIS IS THE ONE I WANT.

  He said down by activating that "this extended warranty can be purchased within the period of full warranty of your Toshiba laptop and must be activated within 30 days of purchase in order to use the service.

  BUT

  When I go to the 'all the terms and conditions"he says"1. Extended warranties are valid only if purchased within 30 days of the purchase of your Toshiba hardware and must be activated within 30 days of purchase in order to use the service. "So now, I can't get a warranty? Why he keep telling me two different things.

  Please, somebody help me before I go crazy.
  Thank you.

  In my opinion, you must contact the hotline of Toshiba and discuss with them.
  It is a forum user, but what you need is a professional help of this.

  So call hotline Toshiba explain the situation and I am sure that you will get the help you need.

• Running out of space on my MacBook!

  I recently started running out of room on my macbook pro, so I noticed that about 100 g of memory re absorbed by "others". I was wondering if there was a way to delete some to make room. Thank you!

  Here is the definition of the OTHER:

  https://support.Apple.com/en-us/HT202867

  Download the Internet OmniDiskSweeper and Grand Perspective (both free) and open them. They will show all your files and respective sizes. Transfer to an external HARD disk or remove files, that you no longer want on your MBP.

  Don't forget to empty the trash. Then only the space is allocated for the new data.

  According to your MBP model, you may be able to install the storage up to 2 TB of capacity that could alleviate your storage problem.

  Ciao.

• How can I remove my photos from my iPhone while keeping in iCloud? because I'm running out of space on my iPhone.

  How can I remove my photos from my iPhone while keeping in iCloud? because I'm running out of space on my iPhone.

  I want to keep all my photos in iCloud. I want to remove some of them from my iPhone 4 (IOS 8) in order to free up space on my iPhone. How can I do this? Thanks for help.

  With iCloud library enabled, you cannot delete a photo on a device (or iCloud.com) without deleting each device which uses iCloud photo library (iCloud.com). In order to save space on your mobile devices (and indeed your Mac if you want to) turn on the optimization of the pictures on these devices (settings > photos & camera > optimize storage on your mobile device and Photo preferences > optimize storage on your Mac)

  Dynamic optimization, it reduces the resolution of your photos, if necessary, so that you don't notice it occurring initially. However, when necessary, it is very effective, and users have reported libraries being optimized for much less than 10% of their original size in some cases. My own library is about 9% of its original on my phone size.

• Continue to run the program while a specific sequence must only be performed every second

  Hello world

  How can I make a sequence runs every 1 s while that continue to run any code at the same time.

  for example: a ligth will Flash with a frequency of 1 s. This must be done independently of any other code running at the same time.

  I really was trying a lot of time without success. 'wait' does not work, "wait" not either or not event struct or anything other work out for that... Well, I was thinking "simple" question

  Could someone give me a tip or even a code example? Please note that in my question I want to only run only a flashing LED. Lets say, I want to receive updates via rs232 Board, but only every 10 seconds. During this time, I want to run any code.

  Thanks for the help!

  Background information:

  For 2 months I am programming a GUI with LabView, which gives me the ability to control via rs232 interface instruments. Up to now I understood a lot of LabView by myself, but here I'm stuck me :-/

  'wait (ms)' or ' wait until... ". "should never be used for timing, they are used for the loop iteration and synchronize the process loop. Use the other functions of timing as past timer or the number of cycles...

  CLD...

  b. functions

  1 use the wait function to control the loop execution rate and the processor response to external events and system tasks

  2. use the function until the next multiple ms to control the rate of execution of loop and sync multiple loops

  3. use any of the functions of waiting for a time software operation

  4 use the number of cycles and the time to get in office operations of software time seconds

• What exactly will happen to the wizard of Frontpage 2000 database during the XP support runs out?

  I have been using the wizard of Frontpage 2000 database to develop a main set of forms that link in my database access 2000 on the side (non-public) back to my site. I realize that the two programs are considered as obsolete, but unfortunately, I can't find a replacement web development software which is what makes the wizard, unless I want to get heavily into the code (kind of like go back).

  I have windows 7 pro and use virtual xp to run frontpage 2000 for my Web site and data-based forms.

  What happens exactly when the XP support runs out? Y at - it a purchase option to continue with the updates, where I am, as it estimated 15 to 30% of the existing Microsoft customers who are always based on the use of XP will be "punished" to explain their desire to stay with a product that has succeeded all too well? (at least for me as far as where this feature goes)

  Ron

  Original title: end of support for XP

  http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  Care about the lifecycle of Windows

  See also: http://windows.microsoft.com/eos

  What does support mean to you?

  After April 8, 2014, technical support for Windows XP will not be available, including the automatic updates that help protect your PC. If you continue to use Windows XP, your computer may become more vulnerable to viruses and security risks. For more information, see does that mean if my version of Windows is no longer supported?

• I'm running out of room on a Pentium 3 computer, volume size 14,30 GB using Windows XP Home Edition

  original title: Windows XP Home Edition

  I'm running out of room on a Pentium 3 computer, volume size 14,30 GB using Windows XP Home Edition. This computer is no longer connected to the internet. I did a 'new' installation of the XP disk in an effort to remove unwanted files, but they remain on the computer, too much space? I have 22% free space (3,19 GB). I have the drivers for 2 printers on the computer, 1 regular printer (.38 MB) and 1 photo (63,63 MB). These are only currently installed programs, I put on the computer after the installation of "new". When I try to use the cleaning disc, the screen says I have 539ko internet temporary files and 32 KB of web client / Publisher temporary files. When I try to view these files, this screen is 'empty' or hidden? If I "check mark" these files and tell the computer I don't know I want to remove them, a screen indicates that they are being deleted (this screen only lasts a fraction of a second)?  but they are stll on the computer. Sometimes it deletes temporary internet files only to "come back" and the size can be different?  I tried to run the Disk Defragmenter (it took a lot of time). When I look at the report, I have a long list of files that it could not defragment? An example would be \ documents and settings------quest-my documents-my... I can't find these files? In addition, the computer is reminding me that I have so many days to activate windows after running the XP disk again. Thank you!

  Do a "new installation" Windows to remove unwanted files, it's a bit like swatting flies with a hammer.  And in your case, the hammer was apparently missed.  And, as you have discovered, you have now re - activate.  I hope that you still have your ID handy product.

  What are the files that are too much space and you want to delete?
  Consider to download and execute JDiskReport, a small utility in Java that will graphically show you what files take up more space on your drive.  In order to do this, however, you need to install Java, available here: http://www.java.com/en/

  Here's how to do a "clean" Windows XP installation, which includes the step of the formatting of the hard drive (otherwise said, the Windows CD not implementing in the form as part of the installation process; you don't need any other disk, diskette or other):

  http://www.theeldergeek.com/xp_pro_install_-_graphic.htm
  http://michaelstevenstech.com/cleanxpinstall.html

  There are important things to think before you do another reinstall.

  Although your computer will probably work after a clean install of Windows XP, some of the features of your material are not available until you install the specific drivers for this hardware (rather than the drivers built into Windows XP).  The most likely problems are the video and audio, but since your computer is very old, it is likely that Windows XP has an enough information on your hardware it will, in fact, work OK.

  Unless the Windows XP CD you already includes Service Pack 3, if you're ever going to connect the computer to the Internet, you must install Service Pack 3 (and subsequent critical updates).  The best way to do is to connect the computer to the Internet and go - only - to http://www.update.microsoft.com , even if you're never going to connect to the Internet, Service Pack 3 may have included updates of Windows features you want to use.

• Speech recognition will not start and continue to run

  I am running vista 32-bit Home Premium edition. I finished the speech recognition session setting the microphone. I finished the tutorial.  However, no voice recognition program continues to run. When I run the program of recognition (or when it is started automatically to the 'start-up', it starts to run and then goes into "Sleep" mode for a few seconds and then on 'Off'.  The second time, I start speech recognition he will say 'Start speech recognition' and then go directly to 'Off '.  When I click on the microphone icon in an effort to implement the program "On", I get an error of speech recognition that says "Please restart speech recognition. It is said in the body of the error message "speech recognition has encountered an error. Please restart speech recognition to ensure that you can continue to use the speech recognition".   When I restart speech recognition error repeats.

  Although the speech recognition tutorial seemed to work, the real speech recognition program doesn't have.

  Does anyone know a fix for this problem? Thank you.

  Hello Dirleton,

  Thank you for your message.  For testing purposes, could you try creating a new account on your computer?  The process is described below:
  * make sure that you logged in with an administrator account *.
  1. click on the 'Start' button > right click on 'Computer' > select 'manage '.
  2. click on the arrow pointing down next to "local users and groups.
  3. highlight "users."
  4. in the right pane, right click and select 'New user' (enter information, then select OK)
  5. now right click on the new user and select "Properties".
  6. Select the "Member" tab and click on 'Add '.
  7. in the box type 'Administrators' and click on "check name".
  8. click on OK
  Then log off your computer and connect again the new account.  Test the speech recognition, this will rule out a problem of profile corruption.  We can then troubleshoot further.
  Please let us know if this or don't help solve the problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.