Life cycle of an Application of automatic start

Similar Questions

• Application will automatically start

  I have a PC that runs an application automatically at startup and stops at Windows and the PC when you exit the application.  I checked the boot menu (one profile) and a few keys in the registry but found nothing.  Always the application automatically starts when it is started in Mode safe.  If not, where can I get?

  Looks like you need to run the free software "Autoruns".  It shows practically everything that runs at startup and gives you the ability to disable one of them.

  Autoruns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902 >

  HTH,
  JW

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• Provide Notifications in all of the life cycle App?

  Hi, I implement of notifications of type push in a Cordova/WebWorks app, and I would like to know what are the options for notifications I can give my app users during the different stages of the life cycle of app.

  When the application is in the foreground , I can post a warning - that's fine. When the application is in the background, I could put the app in the foreground and the attention of the user, although I'd rather see them there is a message to be consumed and let the user decide when to access? The same case applies for push notifications that are received after the app has been closed/killed.

   

  
  If I understand correctly, using webworks I have not access to notifications bar (reference) to my interactive notifications. Although I can use the API of the application to see the/remove an icon + number on the banner/title bar, for example

  

  I can also use a reactivation page to display notifications received while the application was in the background or State of killed. Is that what I missed, and is what the above correct? Any suggestions on how to better manage push messages during history and killed States are welcome. Thank you

  Thanks for the quick response.

  Yes, when the application is closed, a push message starts the application, but in the background (it is visible in the task Chooser). Without a notification, the user would not necessarily be aware that a new message has arrived, without getting into the app - I don't want to not push messages to open the app in the foreground without consent/intent of the user. I understand that push, notification messages are separate entities, but I'm interested in how they can work together (the use of notifications to give control to the user regarding if/when consuming incoming messages when the application is not already in the foreground - I should maybe reviewing my post otherwise).

  I think my strategy will be to check if the application is in the background when a push message, if so, save message push of local storage blob/string, increment the number of banner and then users the ability to use/read the message when they re-enter the app.

• I have adobe pro 11 and life cycle seems to not be available more

  Why does the Life Cycle not automatically load Adobe Pro 11 longer?

  Unbundling of the Adobe LiveCycle Designer of Acrobat Pro since version 11 (XI), which came out something like 3 years ago and has been replaced by the DC version recently, so you're a little late to start using XI now... In any case, you will need to buy LCD separately now if you want to use.

• Bluetooth does not automatically start after start

  Hello

  I have a SONY VAIO with built in Toshiba Bluetooth. My bluetooth in the taskbar icon no longer appears when Windows starts. That's happened? I always start the Bluetooth manually in Control Panel... Help, please. How can I activate Bluetooth on starting again? Thank you very much.

  I don't know how it works on Sony laptop computers, but on my Toshiba BT application automatically starts when the BT module is enabled. In any case, try to define as suggested by the creation of shortcuts.

• Uninstalled emet but after the applications would not start.

  Uninstalled emet but after the applications would not start. Internet Explore tries to start but flashes and disappears, even with Excel. Word starts but gets an error when you try to save. Lucky got Google chrome from another pc and installed so I can at least access the internet. Reinstalled Explorer, office repaired, cleaned the registry, but still no start. What should I do?

  A moderator has moved this thread to the programs Windows of Feedback Forum Forum.

  tried, nothing worked so I uninstalled office and re-installed from disc. Explorer 8 still does not work, but I uninstalled a with explore 7 updates and automatic update started and explore 7 worked. Thought I'd try installing explore 8 new. It worked, even if it failed with the Download Manager. Now all back to normal. I would be careful about the use of EMET, unless you know exactly what you are doing. Not a lot of faith in either the Download Manager.

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• This application could not start because the configuration - side by side - is incorrect

  After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

  Any help would be appreciated.

  Hi ChickC  

   

  Welcome to Microsoft Windows 7 answers Forum!

  a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ·         Infoermation more on SFC scan found in this document:

  http://support.Microsoft.com/kb/929833

  b. perform a disk check:

  Use the following steps:

  1. Open computer by clicking the Start button, click computer.
  2. Click the drive you want to check, and then click Properties.
  3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  1. Click Start.

  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  The .NET framework update

  Download and install the most recent of the .NET Framework

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If the error still persists please provide us with the error log:

  Type eventvwr.msc/s in the address bar.

   The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  It will be useful.

  Thank you, and in what concerns:

  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• YouCam is not working error the application failed to start because its side-by-side configuration is incorrect.

  It worked initially, but now it does not work

  now every time I try to go on the youcam, a box appers and said

  "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. »

  I need help to solve this problem

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest that you run the SFC scan and check if this solves the problem for you:

  http://support.Microsoft.com/kb/929833

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Method 2: Perform a disk check, follow the steps below:

  1. open the computer by clicking the Start button, click computer.

  2. click on the drive you want to check, and then click Properties.

  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Method 3: Update of the .net Framework.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22

  Method 4: You can also try the steps from the link that addresses a similar issue:

  http://Forum.CyberLink.com/forum/posts/list/10017.page;JSESSIONID=90C05F693894B118A564C99DA1172301#44062

  Check the Event Viewer for related the question paper.

• Oracle diagnostic Log Analyzer ADF ask don't not showing life cycle phase JSF

  Hello

  I'm under JDeveloper 11.1.1.7 and run a web application through the Weblogic Server integrated. I'm trying to view the logs in the lifecycle phase JSF as they show in the Fusion of the ADF for 11.1.1.7 Developer's Guide (section 31.5).

  

  I see in the developer's Guide that you configure logging for these packages, I did: oracle.adf (Java: more BEAUTIFUL, ODL:TRACE:32), oracle.jbo (Java: CONFIG, ODL:NOTIFICATION:16), oracle.adfinternal (Java: INFO, ODL:NOTIFICATION:16). Is to show log for me messages, but not the life cycle phase JSF:

  

  What I have to to get the phases of life cycle JSF to show the value?

  Thank you

  Steve

  I realized my mistake. I had put the internal logging ODL for oracle.adfdtlevel to NOTIFICATION: 16 instead of oracle.adfinternal. Updated the log levels and now I get the phases of the life cycle JSF, and ADF.

  Steve

• behavior of an initial page request life cycle.

  I have a doubt in the behavior of Adf life cycle.

  It is said that for a claim only for the phases of restore and make response are executed.

  lets say I have a page (edit.jspx) with departments view instance removed as a form with the confirmation key.

  I asked for this page for the first time and brought a few changes and press the confirmation button.

  It will change in the database without posting because it's the original application.

  Please correct my agreement on the life cycle of ADF.

  When you click the validation button, is not an initial claim, so the validation occurs. An initial request (from point of view of the edit.jspx) was when you emptied into the page.

  Dimitar

• Link to download the trial of life cycle Designer does not work

  I bought a license for life cycle designer and trying to download the trial version for installation.  I can get the terms and accept them.  When I click on accept I receive the error processing request.  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=livecycle_designer this is the link that is broken.

  

  I found a way to download the trial of ss4.

  1. Open this page to receive a specific cookie: applications download Creative Suite 6
  2. Then paste the URL of download directly in the browsers address field.
     Englisch http://trials3.adobe.com/AdobeProducts/ADSR/11/win32/lces_designer_11_0_0_wwe_win.zip
     German http://trials3.adobe.com/AdobeProducts/ADSR/11/win32/lces_designer_11_0_0_d_win.zip
     French http://trials3.adobe.com/AdobeProducts/ADSR/11/win32/lces_designer_11_0_0_wwf_win.zip
     Japanese http://trials3.adobe.com/AdobeProducts/ADSR/11/win32/lces_designer_11_0_0_j_win.zip

• 150 Adobe life cycle error Document in Adobe DC. I can´t use the old documents (xml function) in Adobe DC?

  Hello!

  I'll use My Documents (with XML-dynamic function) with my IPAD.

  But there is this message:

  

  I won't use the statically.

  It works, when I build the same Document with Adobe DC.

  Should I build my old Documents (I build with Life Cycle) again?

  Thanks for the reply

  Stephan

  Hi Stephan,

  The screenshot in your previous post shows the iOS application that's not Adobe Acrobat Reader.

  Unfortunately, mobile applications of Adobe Acrobat Reader (for iOS, Android, and Windows Phone) do not support static XFA forms, or Dynamics generated by Adobe LiveCycle Designer.

  Please use the version of XFA forms office view of Acrobat Reader on a Windows or Mac computer.  Sorry for the inconvenience.

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.