LifeCam VX - 3000 Permission help?

Similar Questions

• Failed to install LifeCam HD-3000

  Hello

  I can't install Lifecam HD 3000 on a Win XP PC with all of the updates in the order.
  An error message appears during installation says it failed without and reason and gave the following link: http://support.microsoft.com/kb/953691

  I have gone through all the steps on this link, but does not help.

  I checked the people who have had the same problem, but no help, links below I checked

  • https://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/9b07dba1-2b28-47bd-9423-e4db4b8b5a6f
  • http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/LifeCam-HD-5000-driver-and-software-installation/08e7300e-C32D-4595-9799-deb3016a8041
  • https://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
  • http://support.Microsoft.com/kb/973297
  • http://support.Microsoft.com/kb/953691

  I also tried mode of fail-safe with network enabled, logged as administrator, but with the same defect.

  Why can't download us manually the installation complete SW?
  (SW 'LifeCam3.60.exe' can be downloaded from

  • https://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-3000

  is not a complete package of SW, it comes in contact with MS and download more things and that is what crashes, we can see the connection in a firewall schedule downloads about 5 MB, which is of ~ 10% of the progress bar up to what it fails, then obviously, the whole package, he wants DL exceeds > 50 MB)

  Please if possible give me a link for the complete SW a manual download, or where to find a generic webcam SW, if it is not please give some advice how to do this, thanks in advance.

  Hi I solved it, please read because it might help you too!

  When I opened this thread I tried for 4 hours to solve this problem * and apparently a lot of people have problems with the installation procedure.

  When I installed the program, I noticed at the beginning in a small window that shows progress, he showed a folder he had created and had a random name composed of letters and numbers such as: 56eb37a890142, go and find him!

  In this case, it creates subfolders where the subfolder has the name «windowsinstaller»

  • Drive:\56eb37a890142\windowsinstaller\x86\windowsxp-KB942288-v3-x86.exe

  (Your path may be different, but the mine was created on a different driver/partition that my Windows driver.)

  During installation, I was going through all the steps (in fact I just leave the installation in the middle of the process, as it is, if I remember there are 3 steps, first unpacking, the other 2 steps is displayed in a new window, and I don't remember now I did the 2nd step, however, this is the 3rd step that fails but in this hack you do not go there)
  ... instead, once the 56eb37a890142 folder was created, I went in the subfolder and installed the

  • WindowsXP-kb942288-v3 - x 86 .exe

  Once this file has been installed, Windows automatically forced the closure of programs and handed over in market, after reboot, I returned to the

  random 56eb37a890142 of the folder and double-click the following file

  • Setup.exe

  All of a sudden the installation went through, obviously something is wrong with the installation program, I think it not to apply the update of windowsxp-kb942288-v3 - x 86 .exe, or somehow fail to do.

  One last thing on the randomness of the '56eb37a890142' folder, I have a low memory, if the installation failed, the folder would be removed, so we might have to make a copy of it.

  Edit: I checked the Windows Installer "windowsxp-kb942288-v3 - x 86 .exe '.

  It's a "Windows Installer 4.5 Redistributable", it can be downloaded separately from the link here below, we could try this instead of the procedure described above:

  • https://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8483

• Microsoft Lifecam vx-3000 webcam does not work with all applications.

  Original title: lifecam vx-3000.

  LifeCam vx-3000, was used for years a couple works very well now it seems to work well for messenger and works when lifecam program is open however does not work if I try and use it on any other web site? Web cam starts picture freezes up with a still image or just empty. Yet once downloaded the software and drivers off microsoft site. Guess it is just a setting. Any suggestions?

  Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?

  2. what websites you are talking about?

  You can follow this link & check if the problem persists:

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  Hope the helps of information.

• Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.

  original title: no camera not connected to this computer.

  Today I bought a LifeCam VX-3000 and I installed the software but when I open it it says there is no camera connected to this computer.

  Help, please.

  Hi Shaykc,
  Here's a quick walk to implement this cam:
  http://support.Microsoft.com/ph/7746#tab1
  Eddie B.

• Problem dark videoconference with WinLive Messenger and LifeCam VX-3000

  My LifeCam VX-3000 webcam cannot support a video call in Windows Live Messenger. I can text back OK, and sound and motion video work very well when I check the audio/video settings. When I try a video connection, the system hangs on my end... the other party may accept the call but my end still ringing and the video image is frozen... There is no sound during this video call attempt.   The system is XP Home SP3... all security is up to date. I use a 6 Mbit internet service.  I did a complete uninstall of Windows Live Essentials, re-installed components and get the same result. This Setup worked fine until a week ago.  This problem would have started at the time, I installed and started using MagicJack, but I tried to uninstall Magic Jack and the result is the same. Maybe another change is that Windows Live Messenger has offered an upgrade to a newer version that was made.  I'm looking for some ideas on any peripheral or software conflicts and methods to isolate or resolve them.

  Hello
  
  Method 1.
  First of all I ask you to re - install the Microsoft Life Cam software and drivers from the link below and then check out.
  http://www.Microsoft.com/hardware/download/download.aspx?category=ice
   
  Method 2.
  If the problem persists, perform a clean boot to find any conflicting with the Windows Live Messenger application.
  For more inoformation on boot, refer to the article below.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Don't forget to set the computer to start normal, as mentioned in the above article.
  Also update the chipset drivers and check. You may need to contact the manufacturer of the computer for that.
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Issues installing LifeCam VX-3000

  I recently bought a LifeCam VX-3000. The first time I tried to install it, I left the computer for more than an hour and it's finished. The progress bar is complete, then restart. So I closed it. When I try to install it again, it freezes at the 'Welcome to LifeCam Setup' page. I tried to install the webcam via the driver through the Microsoft Web site, but which led to the same question.

  Hi Brian0123,

  1. you receive messages or error codes?

  Step 1:

  You can try right-clicking on the Lifecam setup.exe file and select run as administrator to install the software.

  Step 2:

  You can also check the following items and see if it helps.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  Troubleshoot failures to find the new LifeCam hardware

  Hope this information is useful.

• LifeCam vx-3000

  I cannot for the life of get me our lifecam vx-3000 installed on Vista, is - this all simply not possible?

  Best regards

  Joe Sweeney

  Electronic cigarette Nation

  Hey, Joe Sweeney,
  
  1. what exactly happens when you try to connect this device to your computer?
  2. do you get an error message?
  3 have you tried plugging it into different USB ports?
  
  Check if the device is detected in Device Manager and send back the same.
  Reference: http://windows.microsoft.com/en-US/windows-vista/Open-Device-Manager
   
  You can also check the status of the device in Device Manager, if the lifecam appears thereon.
  Here's how:
  a. Once you open Device Manager, find the device and right click on it.
  b. Select Properties.
  c. click on the general tab
  d. check the information under the State of the unit and send back the same.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• LifeCam VX-3000 does not work

  I'm trying to get my new LifeCam VX-3000 works with Vista. Whenever I put in the software disc, a message appears telling me that I'm "not connected to the internet", when I know I am! Can anyone help?

  Hi Tw11david,

  Reset the settings of internet explore and then try to download the lifecam software. Open the link given below and click the Fixit who resets the settings of internet explore automatically.

  http://support.Microsoft.com/kb/923737

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• LifeCam HD 3000 (cannot get rid of the auto brightness in opencv) possible software defects.

  Hello

  I bought a lifecam HD-3000 to make an image with opencv processing in microsoft vs c ++ 2010.

  Everytime I open the camera and see the picture continuously. the automatic white balance is on and auto exposure is on.

  It's strange because I turned these features off (and truecolour) in microsoft lifecam tool.

  In Skype, it works very well, as the lifecam dashboard (icon on the menu bar appears when using the camera) allowing the user to change the video options, unfortunetly this does not show for my opencv program.

  It's like the lifecam app should be on this next video off (or other features be adjusted elsewhere).

  Is there a design flaw? Y at - it some kind of fix or coded the command to keep the dashboard life cam while my program is turned on.

  I'm using the software v3.6.

  Concerning
  Jeremy L.
  Engineer.
  
  

  Hi Jeremy, l.
   
   
   
  Refer to:http://www.microsoft.com/hardware/en-in/support/troubleshooting
   
   
  You may need to contact OpenCV:http://opencv.org/about/contact.html to check if there is a problem experienced with life cam because it works fine in other applications and also material support for the device of life to help cam team:http://www.microsoft.com/hardware/en-in/support/contact-us
  It will be useful.

• LIFECAM HD 3000 does not work!

  I uninstalled my life cam hd 3000 more than 20 times hoping it would work, my life cam only works with the micro, but not the video capture. I'm using windows 7 ultimate... 64 bit please help! I tried everything on the shooting of boredom, everything worked until I got an upgrade to windows 7

  Hi James,

  I see that the LIFECAM HD 3000 does not work. I'll help you with this problem.

  1 Whatís the brand and model of the computer?

  2. what security software is installed on the computer?

  3. What is the exact error that you get while trying to use the video capture?

  4. how the device is connected to the computer?

  Method 1.

  Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  A clean boot to test if any element of service or third party application startup is causing this issue. Try to install the drive in the clean boot state and check.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 3.

  I suggest you to refer to this article and check if that helps.

  Troubleshoot failures to find the new LifeCam hardware: http://support.Microsoft.com/kb/929087

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you change it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Microsoft Lifecam vx 3000 - recipient not able to hear the sound

  I installed the LifeCam as stated but my recipient can't hear me.  We see each and I hear them, but they don't hear me.  Could someone please help.  I'm not really savvy in computer science, but I try.  Thank you.

  Hello

  I understand that you are facing problems with Microsoft Lifecam vx 3000.

  1. what program you use to video chat?
  2 have you tried to use this webcam with other programs?
  3. do you get an error message?

  I suggest to see the next procedure and check if it helps.

  Method 1:

  I suggest to run the hardware and devices Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  
  Exercise the functions mentioned below to adjust the Microphone as default:

  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. Select the Microphone, and then click "Set as default".

  Note: Also in the playback check if the speaker is set as default. Method 3:

  Method 3:

  I suggest you to install the latest drivers for webcam If the problem persists.

  You can follow the link given below to download the driver for Windows 7

  http://www.Microsoft.com/hardware/en-in/d/LifeCam-VX-3000

  Reference:

  LifeCam problems

  http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope this solves the problem. If this problem persists, then please get back to us with the results of these methods and any additional information. We will be happy to help you.

• Microsoft LifeCam VX 3000"does not work"

  I have upgraded to windows 7 and I'm trying to re - install my LifeCam VX-3000 but wen I do, I get a message indicating the cam "does not work" and "the program will close." I installed the drivers supplied by microsoft (LifeCam 3.2) and nothing. I even tried to re - install disk but it says that it was not compatible with windows 7 (it was LifeCam 1.4). So now I have a webcam that I can't use yet is supposed to be compatible with Windows 7.

  I was using XP before and had the same problem, update drivers exactly the same problem has happened then so I had to stay with the drive, but now I can't do same. Any help to what to now please?

  Thanks for your reply... but he turns there where some .dll missing as some other programs didn't work either so I re-installed the reg files and it's ok now... Thanks anyway

  Concerning

  Romani

• SYNCHRONIZATION PROBLEM TRYING TO RECORD AUDIO AND VIDEO WITH THE LIFECAM VX-3000

  I use Windows 7 and have 2 GB of RAM, but when I record on my hard drive with the LIFECAM VX-3000 reading is slightly, but apparently out of sync.  Does anyone know why?

  Thank you

  Tony Cash

  Hi Anthony,.

  Although that do not know what could be the cause, here are a few things you can try.

  1 see if turning off the background tension or lowlights helps solve the problem of synchronization. See the webcam of the help manual.

  2. lower the screen resolution. Reference: change your screen resolution

  3. install the latest version of the software of the webcam.

  You can get the software here:http://www.microsoft.com/hardware/download/DownloadResult.aspx?category=ICE&type=LifeCam&name=68A-00001&os=Win7_3264&lang=en

   

  For more information, see:

   

  http://www.Microsoft.com/hardware/digitalcommunication/LifeCam/Readme/en-us/default.mspx

  4. make sure that you have installed the latest drivers for your video card and sound card. See the documentation for your hardware manufacturer or a web site for more information on how to update the video card and sound card drivers.

  For updates of the driver, see this link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft LifeCam vx-3000 for Windows 8?

  Can we expect Microsoft to publish an updated driver for Lifecam vx-3000 camera that is compatible with windows 8?  I'm willing to be patient if I know they are doing this.  The reason why I even bought Microsoft hardware is first and foremost because I expected Microsoft to keeping relatively up-to-date on their drivers for operating systems that they deliver.  If anyone has information (or if) a windows 8 driver will be issued which would be very useful.  Thank you.

  Try this driver it worked for me applies to: NX-6000, VX-1000, VX-2000, VX-3000, VX-5000, VX-5500, VX-6000, VX-7000.

  1. go in Control Panel

  2. go in programs

  3 uninstall Microsoft LifeCam

  4 restart the pc

  5. install this driver Softpedia Secure download (US)

  6. http://download2us.softpedia.com/dl/ed596af6444cbb8ad0b44556410f7fae/53b6e76f/300082475/drivers/webcam/LifeCam3.0.exe

  7 look how answer you the questions in order to avoid the additional toolbars and other software

  8 assistant will say all functions may not work correctly you wish to install click Yes that all features for me.i am Vibrio 8.1 64-bit windows and my LifeCam vx 3000 works. I hope this helps.

• LifeCam vx 3000 driver for windows 8

  I have recently upgraded to windows 8 Pro 64-bit... my Microsoft LifeCam VX 3000 ceased to operate in it... Please help me restore his works in windows 8 pro... Thank you

  Hi kayramavi,

  Thanks for posting in Microsoft Community!
   
  I'm sorry to inform you that the Lifecam VX 3000 is not compatible with the Windows 8 operating system. "You can find the compatibility report in the following link:
   
  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=lifecam%2Bvx%2B3000&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14
  
  I suggest you run it in compatibility mode windows 7. Here are a few steps, follow it please:
  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click on run for earlier versions of Windows programs

  (e) click Next, select do not appear. Click next

  (f) click Browse and select the driver file you downloaded.

  (g) click Next, click the troubleshooting program

  (h) check the program worked in earlier versions of Windows, but that will not install or run box now

  (i) click Next, select the latest OS known functional for this driver (probably Windows 7)

  (j) click Next

  If you have other concerns about Windows 8, feel free to post.
  I'll be happy to help you.
  
   
  Thank you!