Microsoft Lifecam vx 3000 - recipient not able to hear the sound
I installed the LifeCam as stated but my recipient can't hear me. We see each and I hear them, but they don't hear me. Could someone please help. I'm not really savvy in computer science, but I try. Thank you.
Hello
I understand that you are facing problems with Microsoft Lifecam vx 3000.
1. what program you use to video chat?
2 have you tried to use this webcam with other programs?
3. do you get an error message?
I suggest to see the next procedure and check if it helps.
Method 1:
I suggest to run the hardware and devices Troubleshooter and check if it helps.
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Exercise the functions mentioned below to adjust the Microphone as default:
1. Click Start and click on Control Panel.
2. click on sound, then a new window will open.
3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
4. now check if the Microphone is listed there and right-click on it and choose activate.
5. Select the Microphone, and then click "Set as default".
Note: Also in the playback check if the speaker is set as default. Method 3:
Method 3:
I suggest you to install the latest drivers for webcam If the problem persists.
You can follow the link given below to download the driver for Windows 7
http://www.Microsoft.com/hardware/en-in/d/LifeCam-VX-3000
Reference:
LifeCam problems
http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/webcam/LifeCam-Setup
Hope this solves the problem. If this problem persists, then please get back to us with the results of these methods and any additional information. We will be happy to help you.
Tags: Windows
Similar Questions
-
I am not able to hear the sound even if my drivers are installed properly in windows 7
I am not able to hear the sound even if my drivers are installed properly in windows 7 and the test tone does not work for 1 month I am facing this problem please help.and windows media player also has a problem saying "Windows Media Player cannot access the file. "The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be not correct" Please help...
I have media chip c with creative 5.1 speakers.
until this works perfectly...
I am facing this problem since I made a mistake.
only, I went to run and went into 'msconfig '.
After that, I marked start diagnosis then applied
After having no repeat no sound...
and then I clicked on normal start, but still I can't get my sound help pleaseHello
1. What is the brand and model of your computer?
2. this issue occurs when access to a particular file by using Windows Media Player?
3. do you see red X on the volume icon in the notification area?
4. are you able to access the files of music from the original location?
You can follow the suggestions and then check.
Solution A: For sound program on your computer.
Method 1
You can follow the steps listed below:
a. right click on the volume icon in the notification area.
b. go to the playback device and right click on the empty area.
c. Select Show disabled devices and Show disconnected devices.
d. right-click on the pregnant , select Activate and go to the Properties.
e. use of the device select use this device (enabled)
f. click apply and OK.
Method 2
Make sure that the Windows Audio service is started.
a. click on start.
(b) in the search box, type services
c. right click on Windows Audio and go to Properties.
d. Select Automatic from the Startup type drop down.
e. click on start.
f. click apply and OK.
g. restart the computer.
See also:
Tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Solution B: Due to Windows Media Player.
Method 1
You can run the troubleshooter in Windows Media Player.
Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 2
You can address everyone on the file.
a. right click on the file and click on Properties.
(b) in the Properties window, click on Security tab.
c. now, click on Edit , then click on Add.
d. now, type everyone in the box and click OK.
e. then check the full control box.
f. click apply and then click OK
See also:
What are the permissions?
http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions
-
not able to hear the sound of the cellular caller
my brother bought a Apple Watch 38 mm sport. But after the update to os 2.1 we couldn't here the voice of the caller please say a quick solution
Rgds
Ajith
Hi asmaa
It can help to turn off pairing your brother in a Bluetooth headset iPhone, if it is currently associated with it.
Otherwise, it can help to restart the iPhone and his watch. Turn on both devices off the power together first, then restart the iPhone before you restart the Watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
-To switch on: press and hold the side button until you see the logo.
-
Only able to hear the sound with headphones
I am only able to hear the audio with headphones.
Hello
for some reason, I am only able to hear the sound of my laptop through my headphones. When I take the headphones on the speakers does not work! Help, please. This sux
Go to control panel-> hardware and sound-> sound
On the reading tab, turn on and set your speakers to laptop as the default device
hope this helps
-
I'm not able to get the sound card drivers for a sony VAIO desktop computer
I'm not able to get the audio drivers for a sony VAIO desktopPCV 2253 someone can help me get t for free
Hello
Check with the Sony Support, their drivers and documentation online and ask in their forums.
Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forum
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Microsoft LifeCam VX 3000"does not work"
I have upgraded to windows 7 and I'm trying to re - install my LifeCam VX-3000 but wen I do, I get a message indicating the cam "does not work" and "the program will close." I installed the drivers supplied by microsoft (LifeCam 3.2) and nothing. I even tried to re - install disk but it says that it was not compatible with windows 7 (it was LifeCam 1.4). So now I have a webcam that I can't use yet is supposed to be compatible with Windows 7.
I was using XP before and had the same problem, update drivers exactly the same problem has happened then so I had to stay with the drive, but now I can't do same. Any help to what to now please?
Thanks for your reply... but he turns there where some .dll missing as some other programs didn't work either so I re-installed the reg files and it's ok now... Thanks anyway
Concerning
Romani
-
Microsoft LifeCam VX-500 works not when connected to the Internet
Original title: Microsoft LifeCam VX-500 problem
Microsoft LifeCam VX-500 in office his work on offline, but when I connect to the internet, its does not work?
Hello
1 when was the last time it was working fine?
2 did you last modified the software on the computer?
I also suggest you go through the steps mentioned in the link and the Coachman.
Troubleshoot failures to find the new LifeCam hardware
http://support.Microsoft.com/kb/929087
See also:
Don't troubleshoot bad or no video or problems to start the LifeCam software
http://support.Microsoft.com/kb/933310
http://support.Microsoft.com/kb/969275
I hope this helps.
-
SmartMedia 3000, is not able to find the article in the knowledge base
I wasn't able to find the article in the knowledge base you're talking about.
Well, that's maybe because the search algorithm is pretty lame, showing the same success over and over again :(BTW, how did you post on the thread closed, Jennifer?
Sorry I was on vacation.
Well, no, I Don t carried out the validation in the closed thread. I think the moderators will clean up the mess in the Forum ;)
Now take this link here->
http://support-info.toshiba-tro.de/toshserv/his.nsf/0/8fad9b310caa2f0ac1256af7003a34d8?OpenDocument
Finally the work.
Good bye
-
Microsoft Lifecam vx-3000 is not recognized by the laptop Dell Latitude D620 with Windows 7
I installed 3.0 Lifecam 3.21 and none work. Your support site charge me to go to http://www.microsoft.com/hardware/download/download.aspx?category=ICE
but the module does not work when I select "webcams". It is supposed to go to direct me to a newer driver. Do you have a?
Or my computer is not compatible with your product? I know that he has trouble with the new printers. Thank you for your help. (in addition, Microsoft should really solve their problem of cursor jump).
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Not able to hear the audio playback in Adobe PP
After you convert my video file using the hand brake, I could import into Adobe PP. Yet I hear no audio. The video works fine but not the audio. What is the reference for this?
Thank you
Problem solved. Had to put the default speakers to my usual helmet in the Audio hardware settings
-
Can not hear the sound after installing Windows 7
Original title: Audio problem
I'm not able to hear any sound from my computer. I have integrated speakers it was working perfectly before, but after I installed windows 7 if I play any audio file I can see the game but I hear no sound what should I do
Vista clean install of XP?
Anyway, you will need to install W7 audio drivers specific for your audio device. Download on the part of the Web site of the manufacturer of your PC/laptop, Web site of the manufacturer of the motherboard if you made the yourseof PC, or, if you have one, the sound card manufacturer's Web site.
See you soon,.
Jerry
-
* Original title: does not always
There is a windows 8 there, but I'm trying to download it right now and a red Tin can that appear when it comes to the end and when I click on continue anyway, it restarts just install it?
Just at the moment where I thought that he had finally worked as he said completing the installation to have fun and enjoy, when I click on finish, that's what I get on my screen "device driver software was not properly installed" the with next to "Microsoft LifeCam HD-3000", he says has failed. ". The LifeCam shortcut on my desktop now will not open.
Hi Rachel,
Thank you for your response.
I suggest you to contact the Microsoft Hardware support for assistance on this issue.
http://www.Microsoft.com/hardware/en-CA/support/contact-us
It will be useful.
-
LIFECAM HD 3000 does not work!
I uninstalled my life cam hd 3000 more than 20 times hoping it would work, my life cam only works with the micro, but not the video capture. I'm using windows 7 ultimate... 64 bit please help! I tried everything on the shooting of boredom, everything worked until I got an upgrade to windows 7
Hi James,
I see that the LIFECAM HD 3000 does not work. I'll help you with this problem.
1 Whatís the brand and model of the computer?
2. what security software is installed on the computer?
3. What is the exact error that you get while trying to use the video capture?
4. how the device is connected to the computer?
Method 1.
Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter
Method 2.
A clean boot to test if any element of service or third party application startup is causing this issue. Try to install the drive in the clean boot state and check.
How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135
Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.
Method 3.
I suggest you to refer to this article and check if that helps.
Troubleshoot failures to find the new LifeCam hardware: http://support.Microsoft.com/kb/929087
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you change it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
(http://support.microsoft.com/kb/322756/)
How to back up and restore the registry in Windows
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
Microsoft LifeChat LX-3000 will not work with the yahoo chat
Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?
"Wyodragon" wrote in message News: * e-mail address is removed from the privacy *...Microsoft LifeChat LX-3000 will not work with the chat of yahoo, but works very well for the team talk and evacuate the systems of conversation, but for some reason he saus that's compatible with windows Word 7 and he rejects as a microphone?
The LX-3000 is compatible Windows 7... get the driver from the website of Microsoft Hardware...When you have installed the drivers, open Yahoo Messenger, go to help > configure video and voice...Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
-
Not able to see the semi colon and comma when sending email
Hello
I am not able to see the semi colon and comma everything by typing the e-mail address to "TO" However in the body of the email, I'm able to see.
Thank you
Rakesh K *.
***********
The comma and semicolon are on the digital keyboard.
Click on the '123' button at the bottom left, and then you will see them.
UPDATE: the above is true then in the text box. Sorry I misread your question and thought that was what you were asking about. The semi-colon and comma are without function in the recipient area.
Maybe you are looking for
-
Search my list of messaging for a particular expression
I want to search my mails that are always on the file to search for a phrase in particular that I can find out what happened on this topic. Is there a convenient way to do this?
-
I can remotely power on my cam action AS200V?
I would like to start my cam remotely using my android phone that has the latest application remote "playmemories". The app says "Scan QR code of camera". If the unit is off, is it possible to turn through the app remotely or physically I have to do
-
Pavilion g6-1310sx: processor upgrade
Hello, need your help, I have this laptop for quite awhile and it serve well and I want change it and buy a new one, it will cost me money, so my laptop has Core i3 - 2330 M 2.20 GHZ installed in it, can I change AMD 10 - 4660M with radeon HD 2.30 GH
-
Cannot locate the Greetings Workshop database
Just added new ram. Greetings Workshop database not found. How can I fix to open the program
-
I don't necessarily get coverage error messages (and in some cases I don't get any other error message that the computer tells me an error has occurred), but when I try to install/load of programs that are based on the internet (Viewer gotomypc, phot