LifeLog - no bicycle or option of public transport running on the combined non-Sony

Similar Questions

• NSX - Ping issues between DLR and edge gateway on the network of public transport

  Hello

  I have deployed an NSX in a POC environment and have a few weird questions. I sent a distributed router (DLR) with 2 internal interfaces (related to the segments of NW app & web) and an uplink interface connected to a network of transit (192.168.10.0/29). I have also deployed a gateway of Edge services with an internal link connected to the same interface of transit (192.168.10.0/29) and an interface of uplink connected to the outside world.

  The question is, when I PuTTY on the Edge service gateway and ping interface uplink of the DLR using sound transit (192.168.10.2) network ip address, I do not get a response. The firewall is configured to accept all traffic on the DLR and the edge.

  Someone at - it ideas? Note that the DLR has been configured default gateway pointing to the IP of the gateway of the Edge on the network of public transport (as is the only North DLR connection)

  See you soon

  A rough drawing of the topology is attached. Ping fails to 192.168.10.1 to 192.168.10.2

  FYI - has proved to be a problem with the NSX 6.1.2 that attaches to 6.1.3. No KB for the issue for the time being, nor is he mentioned as being fixed at 6.1.3 in the notes but VMware engineer GSS confirmed that its fixed.

  temporary work is about to stop and start the daemon netcpa on the compute cluster hosts & edge of ESXi

  See more details on my blog http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/http://chansblog.com/nsx-6-1-2-bug-dlr-interface-communication-issues-how-to-troubleshoot-using-net-vdr-command/

• Response of local folders looks like the answer to the discussion group. No signature or formatting options. How can I change the local folders meets regularly?

  Please see image attached. Responses from the eyes of local folders as responses to the discussion groups. No signature or formatting options. How can I change the local folders meets regularly, as they are in the Inbox?

  I don't think that the format of replies to the messages in the local folders are linked with focus groups or to individual account settings. As local folders can contain messages between several accounts or identities, it is more likely that formatting uses the setting of the account or identity appearing in the: field when you reply.

  This is how I think it should work. How this works in practice may be different.

• Cannot run javascript - options/content is even not see the javascript

  try using the options/content - does not yet show the javascript option. I uninstalled the program and reinstalled and get the same result. using xp.

  It is a global problem that JavaScript isn't running on any site? The power setting is always available in the topic: configuration preferences editor.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste java and make a pause so that the list is filtered

  (3) If javascript.enabled is in bold and set to false, double-click it to activate it return true. It takes effect immediately, but you will need to reload the problem pages, so Firefox reads scripts.

  That repair or are sites remains a problem?

  One way that your normal default preferences could be changed is an extension, and another by external software, creating a user.js file. If this problem persists, you can analyze these two.

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • How to fix preferences that will not save

• Why is there no option to all my music in the VIEW menu?

  I have an iTunes subscription game, so that I can access all my music from all my devices. Until very recently, it worked well, but now that one of my devices (a white MacBook) seems to have lost access. On my MacBook Air, under the iTunes VIEW menu, there are two options: all my music, or just the downloaded music and I can choose which of them to access. But on the white MacBook, these options do not appear. Instead there is an option for iCloud see music purchases, allowing me to access music on the computer, or just buying iCloud. But I can not access my music in the cloud at all.

  This is a recent development: before, my cloud music appeared. I am connected with the same account on both machines. As far as I know, the white MacBook is allowed.

  Should I try out allowing and then re-authorizing the white MacBook?

  Re-authorizing can help out you. And your white MacBook is compatible with the latest version of iTunes?

• In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6.

  In the latest versions of FireFox, there's a display option which allowed a change in the size of the fonts and objects on the screen temporarily on the fly. This seems to be missing from version 6. It was very useful and should be added to version 6.

  https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars

  If you mean the - and + Zoom control so it is always there in Firefox 6.0

  or
  View-> Zoom

  Edit: I see that you are using Windows 7 where the menu bar is hidden as a Firefox orange button by default. Some menus objects much may not be visible in the menu of the Firefox button. Show the Menu bar or use the - and + Zoom controls buttons.

• I get no option restore when I hold down the cmd key

  I have a mac mini with a 2.53 GHz with 4 GB of RAM and 500 GB two HD (a server) end of 2009. I bought the mac mini 2nd hand and restored with a copy of my mac book pro 2010 running El Capitan. I restored it by pressing the command and r after that restart and select the external hard drive with time machine copy of my macbook pro.

  I noticed that the mac mini is extremely slow compared to my macbook pro, which has similar features.  I also noticed that there is no network preferences panel and there are other subwindows preferences (icloud, internet accounts and startup disk) that does not open.

  For these reasons, I tried to restore the mini with copy cloned my MacBook when it was running Yosemite, but when I restart and hold down command & r, I don't get food options and it goes directly to the login screen. I tried with the time machine, a cloned HD backup but I don't get any restore option for either.

  When I try to open the startup disk, which does not either. I seem to be stuck now with a very slow machine and no option to restore to factory settings or my older OS of Yosemite.

  My apologies for the long post, but I am confused as to how to proceed and would appreciate any help.

  Erase the hard drive then install Snow Leopard from the DVD retail. The update 10.6.8 download installer of El Capitan of the App Store, click the install button after the download is complete and the installation program is started on your computer.

• In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet radio" function can be used on my iphone5? And if so, how can I make it work?

  In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet Radio" function can be used on my iphone 5? And if so, how can I make it work?

  No more. It merged with the Apple's music.

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• error reported from the transport layer and the error description was impossible to extract

  Hi, can someone please explain how to get rid of the pop-up message when the computer starts up:
  error reported from the transport layer and the error description could not be found! the message has been lost
  Windows XP Virgin internet net gear wireless. I searched on the internet - nothing except suggestions, this is the internet
  connections but is not working okay I tried microsoft fix
  Thank you john

  Hi, I just started to use the hard drive that had the problem, it's still there. The problem is with the raid card. (no problem on other drives) In system config, starting there are two enteries: SATARAIDS and silcfg. I checked the SATARAIDS, rebooted

  missing message. I deleted all the files SATARAIDS and silcfg. my computer, properties, hardware - deleted. deleted the folder in program files. did a scan to remove any files or file fragments on the raid drivers. I did not know I had lefe the cd in the drive for the raid drivers I have in yesterday. I rebooted.
  after reboot, there not says found new hardware "raid card" perhaps because the disc was in the drive and it automatticly installed drivers. FIXED
  NO MORE ANNOYING MESSAGE

• RunAs with the /savecred option does not accept the credentials stored by the cmdkey command

  Hello

  I am trying to automate the storage of credentials for profiles of several people on several servers so that they can use it with scripts, they will use that have the command 'runas' with the /savecred option.  I use the command "cmdkey" to store the user and the password, but when the runas command is run, it prompts for the password anyway.  I know that the /savecred works since if I leave the command-line runas for the password and I enter, on subsequent runs, he is more requested for the password.  Curiously, if I use the cmdkey command to replace the stored credentials, runas invite you again the password so it can store it himself.  Almost as runas does not 'trust' cmdkey.  Any thoughts on why this can happen and how can I get around it?  I really need to automate the identification information storing or it will take a couple hundred manual executions of the runas command to get this store on the profiles of all the people in need.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro, w8itpro, windowsvistaitpro, windowsxpitpro, windowsintune

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Computer is a 32-bit Dell XPS * SP2 Windows Vista (Home Premium), Internet Explorer 9 Panda anti-virus

  Nothing new and NO change has been made.

  Using Windows Mail - how to make the smaller Options box so I can see the bottom and be able to act on it?

  Even when I hide the taskbar I always can't NOT see the background.  Thanks in advance for any help. It drives me crazy.

  Set your resolution to be higher.  Right click on your desktop, go to personalize, then choose the resolution down.  Set it to the highest setting.

• When I right click of my mouse I do not get the properties option. I need to increase the resolution to fit a bigger screen.

  When I right click of my mouse I do not get the properties option. I need to increase the resolution to fit a bigger screen.

  It's not real estate in Vista customize. Then look at the last option.

• FAILURE - Security Options. Login process failed create the security options dialog.

  I'm running Windows Vista Business Edition 32 bit on a Dell XPS M1330 desktop; 4 GB OF RAM. 120GB HD. I use McAfee Security Center.

  Sometimes, the system hangs with the following symptoms :

  • I'm starting to receive messages "not responding" in an application or a program that I opened, for example when using Firefox or windows explore.
  • The system starts to slow down and works with breaks and stills.
  • Gradually, the system does not meet the clicks or keyboard, but I can move the pointer. I am also unable to bring up the Task Manager (no response to C-A-D)
  • Eventually the screen goes black with the exception of pointer, which moves with the mouse
  • After a few minutes, you receive the following message:

  Title bar: login process failed create the dialog box options security.
  Message text (with X-red): failure - Security Options

  • The only button available is the OK button. When I click on the button, Windows is displayed again, but it is completely insensitive (move the pointer). Wait long enough and repeat the sequence preceding.
  • The only thing I can do is stop hard by dint of power off. When I have the power back and reboot, everything seems back to normal, until the next time.

  I have tried the following options:

  • restarted the system and you press F8. So I tried to run the system restore. But in doing so, I got a different error message:

  Title bar: the disk OS (C :) has errors. )
  Text of the message: Windows has detected corruption on OS (C :) file system. You should check the drive for errors.
  Action line: check the disk for errors

  • I clicked on the above action line and the disk check has started, but after about 20 minutes, it got stuck at one point and didn't move forward despite me waiting for 3 hours.
  • Tired of waiting I finally canceled everything.
  • So I decided to restore my laptop to factory settings. After restoring the system to the factory settings that I was hoping it would work very well, but he worked the same and error message "failure-security option" is new.
  • Now the system not yet properly starts in safe mode.

  I would be grateful if someone from microsoft can help me with this problem that I need my laptop for urgent and important work.

  1. start windows in safe mode, press start and type "msconfig" in the search/run box. go to the services tab, find the 'superfetch' service and uncheck the box next to it. Click OK and restart normally (if you have exactly the same problem, I had - that should fix it).

  2. check in the clean boot state: http://support.microsoft.com/kb/929135