Light cable does not

Similar Questions

• Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

  Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

  Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

• Their is something stuck on my port of lightning and cable does not fit on my phone solutions please?

  The cable does not fit on my phone because it is stuck on the port of lightning

  6 iPhne

  Download the right cable before you damage your product and void the warranty.

  http://www.Apple.com/shop/iPhone/iPhone-accessories/power-cables

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• iPhone 6 s so that cable does not charge the iphone 128G 6 +.

  my iphone 6s longer cable does not charge my phone. an error comes up saying my cable or accessory is not certified. I rebooted several times but still the same. What should I do?

  Try a different cable

  If one giving you trouble was originally an Apple accessory - he bring an Apple store or Center authorized service

• Satellite A300 - 1GN PASGCE - LED light button does not work with Win 7

  I improve my laptop for windows 7 everything works fine but the touchpad multimedia light led power button does not work.
  Play, stop, next work earlier but not the light / off does not work.

  No idea why?

  Hello

  Maybe it's a question of s a Win 7.
  I mean that the software is not intended for Win 7 but only for Vista.

  But you should check if you can reconfigure this button again.
  In Toshiba Assist-> optimize, you can find the Support of Toshiba Button tool.
  This tool can be used for the new configuration of the control buttons.

  First click on the button that you want to reconfigure and target path you can then choose the path to the exe file that must be executed by pressing this button.

  As far as I know that the exe files are placed in the program files/Toshiba/TSB folder.

  You will find different applications and one of these applications control the light on/off.

• When I connect the USB and LAN cable does not my trackpad

  Hey guys how are you.

  When I connect the USB and LAN cable does not my trackpad

  How can I fix this error. Please teach me.

  Which macbook model do you have?

  a USB mouse still works?

  your keyboard still works?

  No matter which USB port you use?

  No matter what USB device allows you to create this error?

• My HDMI cable does not appear in the reading devices or Device Manager. I need to fix this problem

  My HDMI cable does not appear in the reading devices or the Device Manager even if it is plugged, the problem is I want to play sounds through my TV that is connected using the HDMI interface. He appeared once in the playback devices and I allowed and played on a YouTube video and it slowed down the video and the sound was stuttering.  Does anyone know how to fix this? If you do then I would like to thank you in advance.

  Hello

  I suggest you try the steps from the following link and see if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-cant-get-HDMI-audio-the-HDMI-device-does/a494af37-9780-4b4a-895C-b2c1fce17fe6

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Lightning cable does not work well

  Its already 3 weeks I use iphone to. the cable of the lightning that was in the box does not work well. I need to pull up to my phone charged. How can I solve this problem.

  Clean the lint on the connector of the lightning on the phone with a toothpick.

• Bluetooth/Hotspot tethering without cable does not work

  Hello world

  We have a weird put in place where Bluetooth does not (entirely).

  iPhone is last 9.3.3

  OSX is 10.11.4

  Setting up Personal Hotspot on the iPhone and then connecting via Wi - Fi laptop does not work. Error message "Unable to connect" standard and suggestion of using Wi - Fi diagnostics (also does not help).

  Go to Bluetooth prefs on OSX and the connection it does not work. Matching does not work, but we CAN see the iPhone. The WiFi scanner captures also the iPhone.

  If connect us the iPhone via the cable and then put in place a personal Hotspot, it does not.

  Surfing on the web, everything works. Disconnect the cable, and it stops again.

  I succeeded in pairing my iPhone to the laptop, so it seems apparent to another iPhone. I'm leaving work via cable uses a direct route via the cable which is a different connection method than live bluetooth signal?

  We have removed the Bluetooth of OSX preferences > no change.

  Reset us the iOS network settings > no change.

  Any ideas?

  Best regards, F.

  Have you looked at these?

  Share your Internet connection with Personal Hotspot - Apple Support

  iOS: System requirements for Personal Hotspot - Apple Support

  Get help with Personal Hotspot iOS - Apple Support

  Barry

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• External USB HDD cable does not match of Satellite A200 USB ports

  I bought a new Notebook from Toshiba A200 Satellite and a 500 GB Maxtor One Touch 4 500 GB hard drive.
  The end of the USB cable to the HARD drive does not match one of the ports on the Toshiba.

  Can I get an adapter, or try to find a rope?
  HARD drive uses USB 1.1, 2.0 or Firewire port.

  Thank you!

  What?

  Sorry, but I don't believe that.
  The Satellite A200 supports USB 2.0 ports Commons and it should be possible to connect a normal USB cable to the laptop!

  Are you sure you are using the right cable to 100%?

  It should looks like this:

  [USB 2.0 cable | http://upload.wikimedia.org/wikipedia/commons/e/e6/USB_TypeA_Plug.JPG]

  and these are typical USB ports:

  [USB 2.0 port | http://upload.wikimedia.org/wikipedia/en/8/84/USB_Connector.jpg]

• Satellite A500-138 - lighting buttons does not work even in the BIOS

  Hello.

  I'm just curious to know if anyone else has a problem with the (play/pause excatly) multimedia keyboard backlight? Mine died today, and there is nothing I can do to make it work again.

  The key still works, but when I turn on the backlight, backlight on everyone, but the play/pause (the backlight of the other keys work, touchpad and Satellite logo too).

  I use Windows 7, but the problem persists even in the BIOS.

  I think the backlight of the button is just dead.

  I have to admit I'm really disappointed with this laptop. Config is great, design and are also involved, but I can just take the couine noise that makes C2D (RMClock, one utility, I know that to solve this problem, does not recognize the A500 motherboard) and the fan almost never works to 70%, and now that the backlight...

  If the backlight of the multimedia key stops working after 3 weeks of use, which will be in the future? It's too scary to think ;)

  I was really excited by Toshiba, but day after day I come to the conclusion, that it is the first and the last laptop that I bought at Toshiba - never had similar problems on other laptops, same nonames.

  Of course, I know that I can has sent for fix, I guarantee (and wait about a month to get a backlight fixed stupid). But why hell not the backlight stoped working, if LEDs vitality is long as hell? It can mean two things: I really don't have a chance, or Toshiba did not pay too much attention to detail during production A500s. And after 3 weeks of use, I fear that the second option is much more likely...

  Then, someone has a feeling similar to this topic? And someone has a problem with backlight?

  Hello

  He damage of s to hear that your light has stopped working, but I think that it s just a software problem.
  I have a Satellite A500 equipped with buttons of enlightenment and everything works great with Vista and XP I m very satisfied.
  Unfortunately until that yet I didn't test with Win 7.

  I doubt you want to send this laptop for ASP, as I said, there seems to be a software problem and you can find it easily
  You must set the notebook to factory settings I mean that you must use the recovery disc in order to get the same State as on the first day of purchase

  Moreover, I visited the European driver of Toshiba page and, unfortunately, I didn't see no Win 7 drivers for this series at this time
  I guess that Windows 7 drivers will be released in the near future.
  So I wonder how you came to the button illumination because this feature requires the Toshiba driver and tools as well as the drivers aren't there?  :|

• Satellite A110-137: serial USB 1.1 Cable does not work

  My computer is Satellite A110-137 and the operating system is Windows XP Home Edition v 5.1 service pack 2. Language setting is the Finland.

  I have a prolific USB driver cable RS232 2.0.0.26 version 1.1.

  It does not at all. When I try to connect it to a package Kantronics KAM radio modem using Hyper Terminal there is an error COM3 message: ei voi games. Tarkista porttiasetukset. (COM3: cannot open.) Check the port settings).

  The settings that I have are 9600 bps, 8 data bits, zero parity, 1 stop bit, hardware flow conrol. It's the same thing in device driver settings and the settings of the Hyper Terminal. It is 100% sure that the problem is somehow related to Toshiba or Windows XP as the same USB converter RS232 perfectly works and right the first time with for example Fujitsu ErgoPro have Windows 2000 (and it's a machine Pentioum 233, very old stuff indeed).

  I can't get any help of Prolific, their home pages seem to be offline now.

  Hello

  I studied a little on the net and it seems that this converter RS232 USB 1.1 creates a virtual serial port (possibly the com 3)
  As far as I know the built-in modem is using the same port.
  Possibly there could be compatibility problems.

  However, this is not a product of Toshiba and this is why I would recommend contacting support of the prolific.
  I've been on the site and it of online.

• Combo eSATA/USB3.0 T510i port: eSATA Cable does not fit

  Hello

  My T510i has a combo eSATA/USB3 port. I guess an eSATA must fit it. But the eSATA cable, I bought does not fit. (It fits into my external hard drive eSATA port, however.)

  Can you help me with this, please?

  Thank you very much in advance!

  Ben