Light goes out when you convert stereo camera 3D rig

Similar Questions

• Satellite M55 goes out when you disconnect the power cable

  Hello

  to unplug my laptop the plug rather than switch to the battery, my laptop turns off often simply even if the battery is fully charged. Other time things work as it should.

  I did some research and my problem seems similar to that detailed here in this post.
  Maybe someone knows the solution for this problem?

  Thank you.

  Hello Luke

  As in the other topic described, you must communicate with the service and explain exactly what is happening. I fear that there may be something wrong with electronic power supply. We can just speculate on this.

  I fear unfortunately there is nothing you can do alone.

• MASTERED OPTION IS GRAYED OUT WHEN YOU TRY TO BURN A HOME PC PREM BRAND NEW VIRGIN DVD + R ON VISTA 32-BIT

  Due to virus I had to rebuild PC using the RECOVERY partition on hard drive. All windows updates have been applied to date (August 2011). Before the virus problem (July 2011) WAS able TO SELECT THE "MASTERED" OPTION WHEN YOU are GOING to USE WINDOWS TO BURN a VIRGIN DVD + r. NEW once AGAIN, this WORKED BEFORE, NOW THE MASTER OPTION IS GRAYED OUT.  I have a brand new DVD + R blank and tried several of them thinking it was the disk (I've used this same brand (magnavox) DVD + R 4 years now never this problem of the "controlled" option is grayed out.) I use the same DVD burner which came with the PC and it allowed me to select the option "Mastered" last month (July 2011). I am using Windows HomePrem 32-bit OS (originial system that came with PC and this allowed me to select the mastered option last month. I applied all the updates Win at present. I have no other problems with the PC. Once again, driving the nail: this WORKED BEFORE, last month on the exact same hardware and the software/OS (Juillet2011), then why this option appears GRAYED out now?  This question has been asked before and 'experts' simply stressed totally USELESS MS pages showing how to select either under control or direct - I DO NOT NEED THIS HELP as I ALREADY KNOW HOW TO SELECT either option and what each is for. Also the other 'fixed' DOES NOT APPLY to this situation. (Do NOT send me to the following links because they DO NOT ANSWER to THE QUESTION: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/burn-a-disk-mastered-is-unavailable-grayed-out/9eb41f09-1778-e011-8dfc-68b599b31bf5?page=1&tm=1312314316719#footer or http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/mastered-format-option-grayed-out/aee1469f-1095-436c-9f12-acce80c2bb99.) These 2 links DO NOT ANSWER THE QUESTION, so answer the question, do not send us in circles, always looking for the answer.  How SIMPLY THE QUESTION IS: Fix us the radio button for 'Mastered' so that it is NO LONGER GRAYED OUT when you insert a brand new, clean the DVD + R in my DVD burner (same that I had for years, which worked before) on my Vista 32 bit OS HomePRem? I have a host of (222 blank GB) of disk space and a lot of RAM (4 GB) and again I WAS able TO select the "mastered"option before my restoration." Help!

  Hi RandyDonaldson,

  You can check out the following link and try the suggested steps to fix the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/DVD-burner-is-recognized-but-cannot-burn-files/5b4adffc-06e7-4813-923e-7f69628a8a53

  The above link contains third party links provided by other users.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• There is a program running in the background on my computer. It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.

  I tried several times to get a solution to this problem.  There is a program running in the background on my computer.  It blocks my mouse and I can even hear a clatter, as when you connect a camera to your computer, or disconnect.  My computer has been analyzed by microsoft help and support was in my computer several times, and accomplished yet nothing worked.  Sometimes my mouse freezes every few seconds until it is maddening.

  original title: hopeless

  It seems that you have tried a number of bugs so far without success. Here are some suggestions of what I'm going to try:

  You mentioned a background current program, if it helps:

  Perform a clean boot to determine if background programs interfere with your game or program
   http://support.Microsoft.com/kb/331796

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Don't forget to follow step 7: reset the computer to start as usual in the link above to return the computer to normal startup.

  I would also check the updates for your video card driver. Find the latest Windows Vista drivers for your specific computer model with the support site for your computer manufacturer. Be sure to get the right drivers for your specific version of Windows Vista, for example, 32-bit or 64-bit.

  If your mouse is a USB model, it can be useful to check the latest drivers for your motherboard (chipset) Vista to the support site for the manufacturer of the computer. Also, since you're here you can check for the other updated drivers for your system, i.e., audio, LAN (network), etc.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have the graphics card Intel integrated, you can check on the website below:

  Update utility graphics card Driver Intel
   http://www.Intel.com/p/en_US/support/detect/graphics

  If you have a dedicated graphics card, you will need to check with the card manufacturer, the two most often used are linked below:

  NVIDIA driver downloads
   http://www.nvidia.com/download/index.aspx?lang=en-us

  AMD (ATI) drivers & Software graphics card
   http://support.AMD.com/us/GPUDOWNLOAD/pages/index.aspx

  If you have not done so, see the support site of the manufacturer of the mouse for the Vista updated drivers, known issues with your specific models or known solutions.

  An element that may cause unpredictable problems that are extremely difficult to identify are (live RAM) memory errors, Windows Vista has a built-in for system RAM check utility:

  How will I know if my computer has a memory problem?
   http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  How to use the Windows Vista memory diagnostic tool
   http://www.bleepingcomputer.com/tutorials/using-Vista-Windows-Memory-Diagnostics-tool/

  To perform a more complete test is the use of Memtest86 but is more complex, includes the creation of a CD bootable for the test, it is not really something for difficult burn an .iso file downloaded to a blank disc (available in the free download link) and then boot from the CD.

  Memtest86
   http://www.Memtest86.com/

  I hope that something of the above can help lead you to a solution.

  Kind regards

• screen goes black when you use windows live mail

  In the last week or two, the screen goes black when you use windows live mail. I use windows vista home and I suspect it has something to do with some windows updates, I installed recently. How can I find and fix the problem? Thank you

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• How can I get rid of the excess columns when you convert a pdf file to excel?

  How can you get rid of the excess columns when you convert a pdf file to excel? How can you get rid of the excess columns when you convert a pdf file to excel?

  Hi carlk91869849,

  Once a file is converted to excel format, you can select the columns and press the delete button to delete their data.

  If I misinterpreted your question, I would ask to provide more details.

  Kind regards

  Rahul

• Windows import video repeatedly stops after a few seconds when you use DV cam to convert and import analog videos

  With the help of a Canon Elura 40 mini DV camera to import my old Video 8 tapes to the .avi format. I followed the instructions from http://windows.microsoft.com/en-US/windows-vista/Import-analog-video-to-your-computer-by-using-a-DV-camera . However, when I click Start import import will work only for a few seconds and then stops. If I keep restarting after that it stops every time (5 to 10 times), I finally get a message under the controls of cam DV that says "commands does not. Then it will keep the import without problem. I discovered this solution accidentally, but not knowing when it will eventually continue to record does get the departure point. If I import directly using a digital camera 8 this is not the case, but the Video 8 does not play well on the Digital 8.

  Thank you.

  Hello

  Method 1: You can follow the steps described in the article below that addresses this question

  Error message when you try to import video clips from a device on a Windows Vista-based computer: "the import device is not responding.

  http://support.Microsoft.com/kb/922977
  

  Method 2: you can follow the steps mentioned in the link below

  
  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

• Screen goes black when you use the computer - Vista

  Original title: SCREEN GOES BLACK, COMPUTER STILL WORKS. A MESSAGE CAME ON A MIRROR SCREEN, COMPUTER WORKS FINE IN SAFE MODE
  COMPUTER STARTS SOMETIMES, BUT SA SEEMS IF THE NETWORK IS ON THE DISPAY GOES OFF, A MESSAGE CAME ON SCREEN MIRROR, EVERYTHING HAPPENED THIS WEEKEND. DID A FULL VIRUS SCAN, NO PROBLEM, DID SPYBOT AND SOME COOKIES WERE FOUND. vISAT OPERANTING SYSTEM.

  Hello

  If the computer is running in safe mode, then start in safe mode and perform a clean boot to verify if a third party program or service is the cause of the problem.

  Step 1:
  Start your computer in safe modeand try to perform a system restore, safe mode.

  Check out these links for more information about the system restore:
  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings  
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 2:
  Try to put the system in a clean boot.

  Refer to this article for help:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone 7 more sudden that it recharges when you use the camera

  My iPhone more brand-new 7A they weird sudden reboots when I start the camera application. I hear the camera application, point, shoot the picture and everything becomes black and the phone made a quick restart. This means that it takes only about 3 or 4 seconds for the phone to come back alive and operational (I have to return my password instead of use the fingerprint).

  This happens too often, but not always. It can happen at the launch of the application of the camera itself or when you try to use the camera via Whatsapp or Facebook Messenger for example.

  Is this a known bug or should I consider taking the phone...

  You can try to reset your device. Press and hold On / Off and the Volume key down until you see the Apple logo.

• When you use the camera of the iPhone APP to send an e-mail, there is no saved project and I lose the message.  Is this normal?

  When I use the camera of the iPhone APP to send a photo by e-mail, I find that I lose the message when I change to another application.  Basically, no project is not registered anywhere.  Am I missing something simple?  Ex: Open Camera APP, select the image for the email, and then try to open the calendar, and then return to the message to add more content... where he?

  I had never tried your method before, but after testing three times, I got the same results as you did. However, if I manually saved the project (press Cancel, then save the draft) in the camera application, it was recorded in the messaging application, when I went there. If I use the photos app to send the photo to go, I can start the email, launch another application, return to the Photos app and the email is always on the screen.

  IF you want to send a picture with an email, do not use the camera application. There is no need to do so. You can use the messaging application or the photos app in order to attach a photo. You have access to all your photos in an application.

• Pop - up screen to record images does not appear when you connect the camera

  Original title: when I plug in my camera to download photos I don't have a pop up screen to ask me some questions were to save you more pictures. I want the pop up screen to come back.
  Guest USB? Download the pictures?

  Hello

  1. Are you referring to the AutoPlay window that appears when you connect a device to the computer?

  What is the number and the model of the camera?

  In case you are referring to the Auto play option then try the troubleshooting steps provided in the link below to fix the problem.

  Troubleshoot AutoPlay

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

• Is it possible to create discrete audio tracks in a multiclip (so when you switch to camera angles, you also pass audio channels)?

  For now, it seems the multiclip reference only the audio track in the foreground, each time I create a multiclip from a nested sequence. I wish I could pass the audio but also video tracks when changing the angles. In addition, the audio is external - not sure if that will make a difference or not.

  When you create your source multicam sequence, make sure to select "Switch Audio" in the pulldown sequence settings. Then, activate "Audio cameras following video ' in the key of the program monitor menu.

• Issue of shares of peak when you convert a Captivate 8 9 Captivate project.

  It seems that there is a problem is preventing the advance of stocks when you save a project CP8 in new CP9.

  3 first screenshots are the same original script (reprise, each passage, SetQuestionNumber)

  Don't be distracted from the "CP9' differentiation in the label of the name of the Action. The content is always the same with the name of the Action 'AddQuestionNumberRetake' ind the original project)

  Resume:

  

  Each pass:

  

  SetQuestionNumber:

  
  

  And finally how the Type of Action has transformed a stock Standard... at CP9:

  

  For your information: none of the existing variables are gone in the conversion of Captivate 9.

  I have to rebuild my Advanced Actions and visit each slide simple quiz (got about 1400 of them) to correct this problem. Or is there maybe an easier way to fix it?

  This is a major bug that has already posted on this forum as well. We hope a rapid solution.

  Solution: when you open the conditional action in the dialog box advanced Actions to the CP9 for the first time, be sure to change something and use the update button. In this case the conditional action will be preserved.

  BTW: it is not converted to a standard action, but to common action.

• With Firefox my fonts e-mail decreased and will not respond to reset, but problem goes away when you use Explorer

  With Firefox my fonts e-mail decreased and will not respond to reset, but problem disappears when you edit from Internet Explorer. This happened with no incentives from me about two weeks ago, and no resets respond to the email. Occurs only with Fox. With ie I enlarged and adjustable policies.

  Have you tried to resize the text size by pressing CTRL and + at the same time (increase font size)?

  Otherwise, you can reset Firefox on its default settings by following the steps here: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

• Windows XP keeps going blank when you try to watch anything

  Or someone has encountered this problem lately? My PC with XP husband continues to go blank when you try to watch anything. He did this during the last weeks. The small shop next to us can not find the problem. XP cannot update everything allows us to look at anything even on youtube? Any suggestion? Chantal

  Hello and thanks for the advice. Unfortunately system restore did not go far enough. BUT I found a way. I downloaded google chrome and since it works... why not with IE or Firefox is a mystery to me, but now it works... Thanks again for the advice.

  Chantal