Light orange vertical lines after he saw work area

Similar Questions

• Visual glitch (vertical lines after the first tab) with 33 FF

  Since Firefox 33.0, I have this glitch visual - a few random vertical lines that appear somewhere near first tab if only one tab is open. I tried different versions and it began with FF 33.0 and in all versions of 33. Now I test 34.0b7 FF and it seems that is not there. So I hope that its does not pop up when 34 goes stable.
  Here are a few screenshots:
  http://i.imgur.com/sdvMGi5.PNG
  http://i.imgur.com/Y19ABs2.PNG
  http://i.imgur.com/Yj8Sj7t.PNG
  To make believe that I have to open two tabs, and then close the other, and this is when it appears.
  These lines are blinking / moving according to the place where my mouse, for example, move the mouse over the address bar allows you to change.

  Hello

  What happens if you disable graphics hardware acceleration? You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  1. Click the menu button

     

     then select Options Preferences on Mac or Linux, or Windows.

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• What is the light orange on my touchpad? Pointer works not!

  The little orange light on my touchpad - then my pointer has stopped working. I do not use a mouse.  I didn't know how to get the pointer works again so I put off the computer.  What should I do the next time this happens?

  Hello

  The orange LED indicates the touchpad has been turned off - it is generally a simple power switch which is activated or deactivated by double tapping the corner of the touchpad when LED is, generally it is the upper left corner.

  Kind regards

  DP - K

• I do not see the 'working area of rendering.

  Gentlemen!

  I work with

  Adobe CS4 AE completely up to date

  6 GB RAM

  Images 1920 x 1080 24 fps

  Windows 7 Ultimate

  Well, if I'm not confused, there was something called 'work of rendering space' as 'area of effect of rendering.

  Evertime I want to synchronize a part of a song with the lip sync, the sound is a little, but I remember there was a way to make a part of the video before you restore the entire clip or there was a short cut like SPACEBAR or enter, but looks like that does not work either any help will be appreciated thanks a lot.

  As Fuzzy says those are commands of Premiere Pro.

  In After Effects, the work area defines how big is previewed during a RAM Preview:

  http://helpx.Adobe.com/after-effects/using/previewing.html#work_area

• U3014 Vertical lines/artifacts after standby sleep usng DVI - D cable. Work around this problem, use a DP cable.

  Hello

  I have a rev A01 U3014 that works perfectly until recently. Over the weekend, the display exposed vertical lines colored after recovery mode sleep. I cycled the power on the display and the problem disappeared. I thought it was an isolated incident and did not think much. The problem occurs for a few days. Today, the problem has occurred three times - twice taking the sleep and once when I restart. I'm fairly certain that this is not a problem of cable or the video card the problem when I disconnect the DVI - D cable. I have also updated and restored my video drivers, the problem is back, regardless of the version of the driver. I'll also try hooking up via DisplayPort to see if maybe the DVI port is the origin of the problem. If there is no other troubleshooting ideas I can try, please let me know. I have the screen connected to an EVGA GeForce GTX 770, running at the native resolution. Here is a picture of the problem. Yet once again, this ONLY happens when the sleep. I have not seen the problem spontaneously occurring under normal conditions of use. Here a link to the image.

  Just to update this thread - I went the DVI - D cable to a DisplayPort cable to the end of July and did not repeat it problem.  Thus, it seems that the problem was caused by a faulty cable.

• Display vertical lines not working - blue and grey

  I bought a Macbook Air on July 2014, but did NOT purchase the extended Apple Care. On October 2015 the display just stopped working one morning given. Not even the Apple logo appears when you turn on the computer. The screen goes black night at vertical lines different colors of light blue gray. This happened only 3 months after the expiration of the warranty. I tried resetting the NVRAM, but it has no effect.

  As I am currently in the Brazil works, I had to make to local technical assistance, which sent me a quote to close to US $1000 to replace the display. It is about this that paid for the entire computer when it bought in Boca Raton, Florida.

  Apple will do something to replace it, or do I just give up the Macbook Air? I'm not ready to pay that much to fix and I find it absurd that this happened only 3 months after the expiration of the warranty. If this was a minor issue, OK. But the screen does not like that in such a short time is unacceptable.

  Here are some photos showing what the screen looks like:

  

  

  Hello, I have a mac book pro 17 '', beginning 2011 and during the day to El Capitan 10.11.2 vertical lines appeared. Its lines of blue pixel, similar as in the photo, but uniform, efevery 1 for about 3cm in the centre-right part of the screen.

  Reseting LANDAU does not help.

• Pavilion g4: different vertical lines color, continue to change. Download fixesometime in 30-40 min. to work on it.

  It shows the different colored vertical lines. These continue to change, when I turn display down and on the rise again. Sometimes he corrected by this display rotation downwards and upwards. Sometimes half display work correctly with vertical lines on the screen half left. Someone if I play the video, then it is fixed in 20-30 min. There also get fixed when I display stand with a certain pressure (where screen and laptop are connected). If I leave the laptop on these lines, the screen comes on for 3-5 seconds and again the vertical lines are displayed. But the display work done after it is fixed. So, what's the problem?

  Hello @Ankit9,

  Welcome to the HP Forums! If I understand your message that you have a problem with vertical lines on the screen of your laptop Pavilion G4.

  From your description it looks like there may be a connection not tight since the changes in question according to the positioning of the screen, however, you can try after documents for video playback problems and a laptop LCD panel problem.

  If you need help, let me know and I will gladly make all that I can to help. If it helped to solve the problem, please mark this message as accept as a Solution.

  Thank you!

• My screen seems to have gone out.  Everything worked well then there black and white vertical lines on the screen.  Had to make a hard stop, bury ashes hold the power button. Now no display

  does that mean if my screen on m MBP15 inches starting to show black and white vertical lines and will not again after that I tried to restart my computer?

  This looks like a bad graphics card. What happens if you hold a flashlight on the screen, you see the desktop or not?

• After that start monitor/screen becomes black with visible vertical lines

  After that start monitor/screen becomes black with visible vertical lines. Move the mouse shows an activity going on behind the disorder. My son says video card?

  Hi Melissa,

  ·         Since when are you facing this problem?

  ·         Have you checked the issue by connecting a different monitor?

  Step 1: It seems to be a hardware issue to me. Check if the cables are well connected.

  Step 2: Connect another monitor to the computer and see if the problem persists.

• OfficeJet Pro 8500 has vertical line from top to bottom after a copy or scanning via adf

  Each copy or scan do using the automatic document feeder to my HP Officejet Pro 8500 a shows a vertical line from top to bottom left of each page. I have cleaned the printer at all parts of the feeder, - nothing dirty in fact found. When I copy or scan the glass plate there is no vertical line on paper.

  Anyone have the same experience with this printer?

  Usually if the scanner works on the dish, but product line in the scans from the ADF, it's because of something on the glass.  Have you tried to shine a flashlight down on the surface of the small approximately 1 in. piece of glass on the left side of the bucket?  This is the strip of glass used for the ADF.

  Like trying to clean the white strip, located on the lid above the glass of the ADF, well clean to make sure there is no debris on the support that can cause this line appears.

  * Make sure that the printer is plugged into a direct socket, rather than a surge protector.  The 8500 has protection against overvoltages integrated in the device and an another surge in the circuit protector can sometimes cause lines.  However, usually this causes lines in both ADF and flatbed scans.

  There is also a document provided by HP with the steps to troubleshoot issues when a line is present in the copies/scans.  The document can be accessed here.

  I hope this helps.

• iMac late 2009, squares spread on the screen, vertical lines of color

  Hi, while working on the imac 2009 end got suddenly squares scattered all over the screen and froze, rely on the button in the back to restart. After reboot when starting, I got colored vertical lines at the same time with the logo of apple and after the screen whent white, and that's it nothing else, remains just white. Appreciate any input.

  Sounds like your graphics card has failed. Find a CENTER in your area and make it check and get an estimate to determine if it is cost effective to repair.

  https://locate.Apple.com/

• HP Pavilion DV7 laptop: Touchpad, sometimes active, even when the power button is pressed on off (light orange)

  I use a wireless mouse (or a wired mouse) preferably instead of the touchpad.   The touchpad has a power button to press - white light indicates on and off Orange light.    After booting, I usually disable the touchpad and mouse wireless, however, sometimes when you type I realize my palms are contacting the touchpad and the cursor jumps around accordingly.    The touchpad is disabled (orange light) but I can control it with a finger, it works like its supposed to as if it is enabled.     Any ideas?   I have not downloaded a driver updated or do anything to try to solve this problem, as I fear, it could actually cause other problems.

  Update the driver it is the usual Council for problems - that is the solution here?   Has anyone else had a similar problem.    Most of the touch pad problems I've read is in regards to an erratic touchpad - nothing to do with 'on' or 'off' problems.

  HI @WayneCM,

  Thank you for your inquiry. I will do my best to help you!

  I understand that you use the power button / stop to turn off the touchpad.  Sometimes, you will notice that your palm is in contact with it and the cursor is accordingly jump around but the rest light orange, to show that he has disabled.  Here is a link for HP Notebook PCs - using the touchpad and ClickPad (Windows 10). Please review the section on "Open the properties of the ClickPad" in figure 4, you'll see there's a button where you can disable the touchpad, until you want to reactivate it. Please let me know if this helped.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on ' Thumbs Up ' to give me a Kudos.

• Tecra M3: black screen on startup, the vertical lines on the external monitor

  Hi all

  I searched a lot on the Internet for a solution to this specific problem, I have, but did not find a thread
  with exactly the same problem. I have a Toshiba Tecra M3 with Windows XP SP 3. Two weeks ago, I encountered problems with the commissioning. After a couple of times to restart it would work. Then it became worse... When I try to run I see no splash... the screen remains black. If I press the power button, I hear the fan and CD player but no screen. It is totally black. I know its working because I can go (blindly) in the installation program. Press end, and then press Y and enter. The computer will restart but still no screen.

  I plugged it to an external monitor. Pressing Fn and F5 allows switching. The external monitor shows different
  vertical lines in multiple colors. They change if I go to settings or you try to start windows.

  Does anyone have a solution to these problems?

  I have fear of solution can be given by the service only.
  In my view, this question must be tested properly.

  I can't say for sure, but to me that sounds like a technical question. Without testing you will know for sure what is the problem.
  Here on the forum we can only speculate why this happen.

  As you can see on notebooka? s LCD problem. On external it doesnâ? t properly work as well. It may be a faulty graphics card.
  Try to contact the nearest authorized Toshiba service and speak with the technician.

• VGA P20 - 552 (vertical lines)

  Hi I need help I have a problem in my VGA when I start it shows vertical lines, and then when it starts to BONE, the screen goes black, that I had tried to use the system restore it was working after a reboot, then I rebooted the problem started again since, so nothing works just it never logs of windows if I choose Safe mode it flickers a lot.

  Thank you very much
  Asger

  Hello

  do you get the strange lines before even loading Windows? You should normally get a TOSHIBA logo when you feed the machine. Are the lines even then? If so, your device needs service!

  Good luck

  Tom

• White with vertical lines colored on Equium A60

  Hello

  I'm new on this but really need your help. My laptop is around the age of 18 months and has always worked well. Last week, I plugged modem broadband via Ethernet cable and configure the broadband services. A few minutes after doing this, when I looked back to the screen, he went all white with vertical lines colored it. I rebooted the machine etc and that's all I ever get now. As soon as I turn on, it will just right to white with these colored vertical lines.

  I tried to connect an external monitor to it and that works very well. The laptop is a Toshiba Equium A60. I'm worried that the screen is burned, it is possible for a power surge or something like that to go down the Ethernet cable and the screen shot?

  Thank you

  Adrian

  Display features has nothing to do with the Ethernet cable. Test with external monitor is very good, and on this way, you can see if the graphics card is perhaps responsible for that.

  From your description, I think that the view is the problem. Of course, just intensive display test can give more answers.