light & quot; displayed in a TextBox via actionscript

Similar Questions

• Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Can I use my MacBook Air as an external display for a MacMini via ports thunderbolt?

  Advice appreciated!

  No, you can't.

• Application date HTTP header can be set via ActionScript.

  Hi all

  I'm moving urlrequest liaison with 'Date', 'Licence' to amazon s3 to flex 4.5 web application. However, it is unable to connect and get the error as,

  Error #2096: Could not set the request header HTTP Date via ActionScript.

  So, please tell me what I need to use or that flash player supports to add "Date" at the request of the header.

  Sory for the late reply. I used presigned url to download files from s3.

• Add a keyline in a form via actionscript?

  I wrote a reverse mask function that allows the user to draw on the screen and basically erase what they see... There are slightly more to it than that, but it's a live project!
  I was wondering if it is possible to:
  -Add a keyline in a form via actionscript?
  -either expand the shape in a few pixels fill to give the appearance of a keyline?
  
  See you soon

  See you soon! Who did.

• Satellite L500: cannot change display Multiple to play via the TV

  After following the instructions to connect the computer to the TV via HDMI there is no signal. Followed the instructions in the user manual, but
  User manual said to go to adjust properties/display resolution/advanced/GenericPnPMonitor/graphics properties, then click on "Display Multiple", but there is only a drop-down list option 'Single view' and 1 primary device in the laptop.

  When I toggle FN + F5 to change the display it shows only the display LCD.

  Is it something simple, I'm missing or suggests a flaw with the Toshiba display driver?
  Thank you

  Hello

  Because I use the HDMI connection, I can recommend this:
  First of all, connect the cable to your laptop and a TV or external monitor. Then turn on the TV and choose the right input channel. Finally turn on the laptop, and normally the HDMI connection will be recognized automatically.

  If it doesn t work I recommend you to update the display driver and BIOS. Both can be based on the Toshiba site.

• Inspiron 530 s displays only half screen via HDMI or DVI

  I have a strange problem that I'm seeing with an Inspiron 530 s that I'm trying to get up and running again.  It seems to work fine if I use the default VGA port, but if I try to connect it to a TV via HDMI or DVI, it only appears on half of the screen.  The left side of the screen looks normal (be it screens start Dell or actually in Windows).  The right side of the screen is a series of vertical lines.

  I checked the video card isn't the issue.  I swapped another video card in and it does the same thing.  Both cards work fine in another machine.  I also checked the TV working properly.

  I hung the 530 s on a normal 17 "monitor via the VGA port and I see the entire screen.

  The version of the BIOS is 1.0.0.18 that I understand to be the latest version.

  I really want to get this working, but I'm not sure what to look at this point.

  Other tests established that the 530 s as well as the 531 s (which I could test on both) must have problems with some video cards.  Once I established that the question could be reproduced on both models, I decided that this must be an incompatibility problem rather than a problem with the motherboard.

  I decided to try to get Windows installed despite the half of the screen.  Once I had Windows installed, I changed the resolution to the native resolution of the TV (1366 x 768) and the damaged screen went away.  Somehow, it was fixed even if I rebooted the machine, at this time there and I was able to navigate through the BIOS with a normal screen.  In fact, I was not able to reproduce the problem again until completely stop the machine and remove the power completely.  After that, the machine would still start with display messed up, which would remain until when you start Windows, it changed the resolution of the screen at native resolution and there again it would be "fixed".

  The video card is not really new, but I think that it may have been written in a more recent specification of the standard PCI-E that this motherboard can be expected.  If I were so inclined, I could probably find a video card that does not have this problem, but instead, I think I'll just this weird issue.

• How to make a keyboard navigation in the list multiple choice Flash and control it via actionscript?

  I do a style rpg game in actionscript 3.0 and I want to do a list multiple choice. I know how to make the list with the buttons and to fight against it. My question is, how to make a list that can be done using the arrows on the keyboard? What I'm after is to be able to strike up and down to select the buttons and enter to choose the button.

  You'll need to make the macarons also movieclips so that you can control which display state they are in (highlighted or not).

  Then, you need to configure a listener for the keys on the keyboard so that you can have change the selected button and run if you press Enter.  Here's a basic configuration of a keyboard listener that shows how to detect the three keys you mentioned...

  stage.addEventListener (KeyboardEvent.KEY_DOWN, keyIsDown);

  function keyIsDown(e:KeyboardEvent):void {}

  If (e.keyCode == Keyboard.DOWN) {}

  trace ("Down");

  } Else if (e.keyCode == Keyboard.UP) {}

  trace ("up");

  } Else if (e.keyCode == Keyboard.ENTER) {}

  trace ("Enter");

  }

  }

• Display problems video rental via Apple TV on TV and iPad.

  I can't update software or view a rented moving via Apple TV 2 on my TV.  Also, I can't locate the movie on my iPad.  Apple charged me for the film while the part works OK...!

  A movie rented on Apple TV can only be seen on Apple TV (is not a purchase so will not be available in the cloud on other devices)

  What exactly is the problem when you try to view?

  This firmware is running?

• Do not display my computer information via & assistance. Windows XP

  I get this message when you try to view my data in support &.  It says "collecting Local disk information to 100%", but nothing is displayed (this used to work fine).  just above the progress bar there is a message "'undefined' is null or not an object".  In the advanced system, Error Log information - there is this message "error: initialization of the device Service - impossible to create or initialize the Table of the device.»  Error code 0x80004005"I tried to do some restorations system but it does not either.  I have recently install Malwarebytes software and I suspect that this is when the problem started, or he could leave a virus that was the reason why I installed the Malwarebytes in the first place.

  Hi JoeBlandford,

  Try restarting the service help and support by clicking on Start-> Run, type & -> services.msc-> ok

  Double click on help and Support->, click Start, and select automatic from the drop-down list.

  Try using the help and support now to see if its working, otherwise you can follow method listed: http://support.microsoft.com/?kbid=555472

  I hope this helps.

• The LCD screen no longer works and no housing or other lights are displayed since the last update.

  The LCD went blank since the last update from microsoft, probably for windows 8.

  I am running wireless through Windows 7, 64 bit.

  Everyone knows this?

  Looks like the LCD screen is out. It might be the screen, or possibly a link inside the printer.

  However, it seems that the printer is able to be used under the actions of the façade. We can print, scan, and even perform a scan-to-print copy.

  However, if you want to take advantage of the features of back cover then you will want to consider a different printer because it sounds like this is to have an electrical problem in the display. Think to call the HP Technical Support on the upgrade program to get a new unit reconditioned at a discounted rate.

• light, bright display

  When I turn on my computer, the monitor and the screen to look right. the screen is bright. However, recently, when I turn on my computer, the monitor is brilliant as usual, but turns off after about 10 seconds. Now my screen looks dim. Even when I change the contrast / brightness of my screen, it seems still very badly. How can I solve this problem and make it back to normal?

  Hello
   
  This can occur if the video card driver is malfunctioning or the display settings are incorrect.
   
  Try the following steps to resolve this problem.
  Step 1: Adjust the display settings for the best appearance.
  Open display settings by clicking the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.
   
  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor
  To set the brightness and contrast of your screen:
  http://Windows.Microsoft.com/en-us/Windows-Vista/adjust-your-monitors-brightness-and-contrast
   
  If the problem persists after adjusting the display settings. You will need to uninstall and reinstall the graphics driver. To do this, follow these steps.
  NOTE: Visit site system manufacturer and download the driver of the video card in your system.
  1. click on start, type devmgmt.msc and press to enter.
  2. expand graphic cards.
  3. right click the sub element and click on uninstall.
  4 restart the computer for changes to take effect.
  5. install the video card driver and restart the computer for the changes to take effect.
   
  To troubleshoot monitor and video card problems, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Files or folders is not displayed when drive accessible via the path UNC path (or mapped drive) and not recorded in the field

  We have some users who are mobile and authentication of field across from site to site VPN not success not always.  For this reason, I give UNC paths for a shortcut or 'network' and otherwise mapped through a script when the map includes, for example:

  NET use S: \\10.10.22.11\Sharename / persistent: no password/User: domain\username

  This always gives the user access to actions you want outside of the domain.

  However, there are times where a folder or file saved from within the domain is not accessible to the remote user via the link above.

  I evaluated generally it was a matter of time and the spread and if I navigate from a performed computer and use the full path with the file name, the file opens. If, however, no such full path with the file name is used, the files or folders remain invisible.

  Since it is intermittent, I'm afraid, that I have little additional information.

  My hope is it's the common or at least known and there is something I can do to alleviate the problem.

  Thanks in advance for any help.

  Stuart

  Hi Stuart,

  Thanks for posting your question on the forum of the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• How we replace whats displayed on a screen in ActionScript

  I have a flash program that I update what to load 10 images dynamically and replace the 10 images of the existing movieclip.

  The program uses stop to display and image (images 1 to 10).  I want to load the images from a folder (which I already have), but now that they are responsible to bitmaps, how can I change the image on frame1 with Bitmap1, then frame2 with bitmap2 and so on.

  so why use images, at all?

  Just use one charger to charge what you want.  the previously loaded content is automatically removed a charger that is reused to load a different bitmap.

• How to create uniform lighting (Fulbright) display 3d objects?

  I'm currently texturing an object with Photoshop, the problem is that when I try to use the eyedropper tool, it takes into account the brightness, the color is from light. So if I choose a color live and paint it on my object, it will be darker because there is not much light goes into it. Then when I use the Eyedropper, bright color, I took initially is now darker lighting. Top left is an object that has an equal brightness, while on the left is an object with the information about lighting. Is it possible for objects in hammer to resemble top left I showed you?

  Change the mode of rendering unlit Texture in the rendering options.

  Mylenium

• Newbie question - using Tween via ActionScript

  Let me start by saying that I am completely new to Flash, so I won't be at all offended if formulate you your answer as if I was eight years old. In fact, I'd quite probably happy.

  I'm trying to recreate a simple Flash animation that someone did for me in the past. I thought I had an idea about what was going on in it, but it seems that there is a piece that miss me. Basically, there are three images (in fact the video clips) covered buttons (also video clips). When a button is clicked, the image below fades into view. There are also three other buttons, one per image, causing this same thing happen.

  So, I recreated the original file using new images. I created each instance of each clip that was present in the original file and named each of them and set the properties to match. Then I copied the original to the new ActionScript code and ran the debugger. The code is as follows:

  Import mx.transitions.Tween;
  Import mx.transitions.easing. *;
  txt1._alpha = txt2._alpha = txt3._alpha = 0;
  click1.onRelease = pclick1.onRelease = Function)
  {
  click1._visible = pclick1._visible = false;
  var xScaleT:Tween = new Tween (exp1, "_alpha", Strong.easeOut, 0, 100, 2, true);
  var xScaleT:Tween = new Tween (txt1, "_alpha", Strong.easeOut, 0, 100, 2, true);
  }

  click2.onRelease = pclick2.onRelease = Function)
  {
  click2._visible = pclick2._visible = false;
  var xScaleT:Tween = new Tween (exp2, "_alpha", Strong.easeOut, 0, 100, 2, true);
  var xScaleT:Tween = new Tween (txt2, "_alpha", Strong.easeOut, 0, 100, 2, true);
  }

  Click3.onRelease = pclick3.onRelease = Function)
  {
  Click3._visible = pclick3._visible = false;
  var xScaleT:Tween = new Tween (exp3, "_alpha", Strong.easeOut, 0, 100, 2, true);
  var xScaleT:Tween = new Tween (txt3, "_alpha", Strong.easeOut, 0, 100, 2, true);
  }

  When I ran this film, I received five of the error "there is a conflict with the xScaleT definition in the internal namespace.

  Googling this error led me to believe that it was because of all the declarations with the same name (despite the fact that this same error appears when the original film is run), so I changed the xScaleT1, xScaleT2, etc. This got rid of the 'conflict' errors, but I now get:

  1172: definition mx.transitions:Tween could not be found.
  1172: definition mx.transition:easing could not be found.

  .. .and then a bunch of type and the property not found error I guess stem out of its inability to find the two definitions above.

  Why don't happen when I run the original film and how what to do to fix? Is there any statement or class code, I missed the copy of the original? All advice is appreciated. Thank you.

  Make sure that your publication settings are not defined for AS2 and AS3.