Lighting effects missing circles adapt?

Similar Questions

• How to make adjustments in lighting effects?

  Why there is no setting circles and handles to make adjustments in lighting effects?

  Refer to this:

  My lighting effects filter shows no controls for the lights.

  Mylenium

• Lighting effects stopped working

  Whenever I use lighting effects (filter > render > lighting) in my Photoshop CS6 for Mac, there is no more adjustable as circle below:

  Mine appears like this:

  

  How can I him as if it were before?

  2 suggestions: I can think of:

  1 reset first Photoshop Prefs: http://forums.adobe.com/thread/375776

  See if that helps. Otherwise, proceed to step 2:

  2 Photoshop (from the title bar) > preferences > performance > settings of the graphics processor > avancΘs > fashion design > change base.

  See if that helps.

  Post back to your progress.

• Help! Problems with light effects.

  Hello everyone.

  I'm not sure if simply, I don't know how to use the program properly or if I'm running into some sort of strange technical issue, but when I try to use render > lighting I can't move the light source. I can see the light, but there is absolutely no kind of the area delimitation or container around it, and it seems to be unmovable. It just something I miss or cela a bug?

  Thank you!

  C

  Firstly, you must ensure that you are using a video card supported with the updated driver.

  See this link to the FAQ, it will give the list of supported cards and GPU guide troubleshooting.

  FAQ: What devices use the GPU and how to solve problems of GPU?

  When you get the lighting effects, you should see an ellipse that you can move and change. There are several selections to the right of the word 'lights '. If you select one that looks like a flower, you get a widget to move the light.

  Check first GPU, then play.

  Hope that helps!

  Guinot

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Difficulty in the light on the AC adapter and the power light power on after connect you to the laptop

  HP Pavilion dv3t notebook. Each time get adapter connect to the laptop, it takes at least 10 minutes to get the AC adapter and power indicator light on. Sometimes it does not light on all day.  It always happens any with the battery or not.

  If I start the laptop with the light on the AC adapter and the power light, no matter how I move the power cord, it maintains support, works very well.

  But if I start the laptop without the light on the AC adapter and the power led on even with the, i.e. start with the battery as power, no matter how I move the power cord, the led on the AC adapter and the light, i.e. no charge. He stops until the battery drain.

  I believe that the AC adapter is good. But I have no idea why he has trouble in the light on the AC adapter and the power light on after to connect to the laptop.

  Dv6 had a somewhat similar problem that was treated with a BIOS upgrade. I watched the latest BIOS for your laptop and there is nothing about a problem of load, however. If it works very well and also a long time that you turn it on with the AC plugged in but only has a problem with loading when you connect the adapter Windows runs, I'm tempted to say that it is a software problem as a problem with Windows power management. Maybe if you remove the hard drive, power supply, switch it on with battery only, then plug the adapter when you run in a pre-Windows environment, we can see if the same problem occurs. If it was my cell phone, I would also like to do the update BIOS level, just to see if maybe it would affect something. I could also try to run it from a Linux Live disc any and see if the same problem occurs in another operating system. Last resort I would begin focusing on the issues of possible material, as a module of taking bad AC, which is an other replaceable part that requires no welding.

• cannot apply the workspace of lighting effects because the disk is not available. I use Photoshop cc 2015 on OS 10.11.3

  I use Photoshop cc 2015. When I go to render the lightig effects, I get a message saying 'cannot apply lighting effects workspace because the disk is not available. I'm running on OS 10.11.3 system

  Any ideas?

  Hi Mary,

  Please take a look at the following link: Optimize performance Adobe Photoshop CC and try the steps.

  Once done, see if you still get the same error.

  Concerning

  Tanuj

• Lighting effects darken Clips?

  I want to animate an Omni light using Adode first for interesting effects lighting effects. I want to animate the intensity from 0 to max in a few seconds, but when I add a keyframe to 0, the rest of the clip is darker than the original source footage, if that makes sense.

  I'm pretty new, so thanks for any help

  I fixed it, for anyone else who has this problem, go to the 2 light and change in directional and adjust the intensity accordingly.

• Problem to copy a selection after Photoshop light effect

  After application of the Photoshop filter lighting effect it was not possible to use the "Select all" command or copy a selection. After resetting the preferences and disabling of all external plug-ins it has not solved the problem. After saving the image and Photoshop is restarted, the commands are working properly again. I use Photoshop CC 2015 on a Mac (Yosemity 10.10.5)

  Problem is solved after the most recent installation updates Photoshop 2015CC

• What happened to the function of the PSE 8 lighting effects

  I've recently switched to PSE PSE 8 13.  I find all the same features of the old software except one: there seems to be no option of lighting in PSE 13 effects as there was in PSE 8.  I mean the function that allows you to illuminate or darken portions of image by adjusting the location of a light source illuminates the image.  I think that option was referred to as "Lighting" PSE 8 and has been found, I believe, under the 'render' (or perhaps under 'style') option under "filters".

  This feature is no longer available in PSE 13, or is it last?

  Thank you!

  Several things have been removed from PSEv.12

  What are the features of the previous versions are not available in Adobe Photoshop elements 12?

  I don't know if it can be restored to PSEv.13 as suggested here:

  Restoration of filters in Photoshop Elements 12 lighting effects

• Lighting effects Bugs and problems

  I am trying to use lighting effects and experiences a problem.

  I used on a visible layer of timbre and used it to simply add a little extra light to the image. It was working perfectly, but I had to remove it in order to sort something else out there. When I tried to create the same effect he added is lighter to the existing image, it became the only light and blacked out the rest of the image and became more like an incredibly strong, instead of adding just a bit of light vignette. I had not set any settings or anything?

  Any help or advice would be greatly appreciated!

  Try to reset the filter light effect

  

• lighting effects are grayed out?

  Hello. I'm trying to use the lighting effects in adobe photoshop. I have an 8-bit RGB image and I've updated my NVIDIA graphics card. I work in adobe photoshop on a windows 7.0 cc. When I click on FILTER > RENDER > LIGHTING, the lighting effects button is grayed. Does anyone have any suggestions?

  How much VRAM card you have? I don't know if the light effect is also related to the 512 MB limit.

• Where the lighting effects filter go in Photoshop CS5?

  I'm looking for the filter under filter lighting effects > render and I do not see? Where at - it go?

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  Try Photoshop help | Add light effects (CS5)

• Cs6 the lighting effects filter problem

  Hi when I try to use the lighting effects image filter going DARKER, lighter, as if not in reverse. If I try to lighting on a layer that is solid medium gray, he turns completely black!

  Any help is appreciated!

  Thank you

  Hi Amberstars,

  Please let us know what graphics card are you using?

  You tired to increase the value of the mood and decrease the metal value?

  

  Please post on the Adobe Forums.

• With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions

  With the help of Photoshop CC on my MacBook Pro (bought a few months ago)... The question I have is that under the filter options, when you select made... There is no option use lighting effects... any suggestions?

  Hello

  Please make sure that you work in 8 bits/channel and RGB mode. (Under Image > Mode > Select RGB and 8-bit per channel) lightning effects only works in this mode.

  Also in preferences > Performance > "Use Graphics Processor" must be checked.

  

  ~ Assani