Lightroom 5.7.1 - LR stuff famous black screen

Similar Questions

• Discover 5 PCOIP affected by black screen

  Hi all

  I meet the famous black screen when trying to access a desktop through PCOIP session. RDP connections work fine. I followed (I think) the document referring to the 3 steps to fix this problem without success. I am unable to get through PCOIP connections work properly via the server connection (internal) or security (external)

  Any help would be appreciated. The Setup is as follows

  1 VC (vsphere 5)

  1 connection to the server - view 5 install (windows firewall disabled)

  1 security server - part 5 install (windows firewall disabled).

  Virtual desktop Windows 7 (windows firewall disabled)

  Server Config connection

  Secure HTTPS tunnel is configured with the URL of the login server with the connection to the active desktop

  PCOIP gateway is configured with the IP address of the server connection with this gateway secure to use verified pcoip Desktop connections

  Server Security Configuration

  Secure HTTPS tunnel is configured with the connectable external URL

  PCOIP external gateway is configured with the connectable external IP address (same IP address which resolves the url for the above secure tunnel)

  While trying to connect to pcoip session from the local network, receive a black screen for about 10 seconds then a disconnection without error.

  While trying to connect via external, the same behavior occurs.

  To facilitate the troubleshooting of this problem, I allowed all traffic between subnets. I see not all packages being removed through the firewall.

  See you soon

  Journal of security server (PCOIP Secure Gateway newspapers) have the following entry

  [12:36:03.771304 28-Dec-2011]: connected to the server PCoIP
  [12:36:05.303531 28-Dec-2011]: SSL handshake completed with client PCoIP
  [12:36:05.332828 28-Dec-2011]: Configure a client PCoIP to Server UDP [1903182396-0] tunnel: 10.10.50.50:4172
  [12:36:05.332828 28-Dec-2011]: set up a PCoIP server to client UDP [1218755094-0] tunnel: 0.0.0.0:4172
  [2011 dec-28 12:36:05.367007]: connection error client SSGI during playback of SSGIS APDU header: a request to send or receive data not permitted because the socket had already arrested in this direction with a previous shutdown call
  [12:36:06.336734 2011 dec-28]: error reading of SSGIS PCoIP server header: a request to send or receive data not permitted because the socket had already arrested in this direction with a previous shutdown call
  [12:36:09.805484 28-Dec-2011]: received header
  [12:36:09.805484 28-Dec-2011]: PCOIP-SG/1.0
  [12:36:09.805484 28-Dec-2011]: XML
  [2011 dec-28 12:36:09.805484]: PSGC27-1781
  [12:36:09.805484 28-Dec-2011]: 93
  [12:36:09.805484 28-Dec-2011]: 93 93 received xml
  [12:36:09.805484 2011 dec-28]: received the command: get-counter

  Justin

  This is certainly not the right display driver.

  Have you tried the simple solution of uninstalling the agent, uninstall Vmware tools, then reinstall the tools, then reinstall the Agent.

  In this exact order.  Based on your screenshot you have might have just a pilot get trampled by something else.

  Gunnar

• everytime I open my files in HDR pro it gives me a black screen and my lightroom not gives me the possibility of HDR?

  whenever I try to use my HDR pro it gives me a black screen and lr does not give me the HDR option

  Hi cheryld,.

  Please update the drivers of graphics processor on the manufacturing site, also the Version of Photoshop to 2015.1.2.

  Photoshop CC 2015.1.2 update now available

  And you need to select several images in Lightroom > menu photo > edit in > merge HDR Pro in Photoshop.

  Kind regards

  Mohit

• Lightroom slideshow with black screen problems

  I have a new macbook air and took the opportunity to move my photos in aperture to lightroom because apple has stopped supporting openness, its advanced photo software.

  I can see my fine pictures and can change them, but when I try to run the slide show all I get is a black screen. Has anyone experience this and solved this problem? It's maddening because I bought textbooks and followed the instructions. Nothing in the manuals on the resolution of this problem. Help!

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.

• Since the last update to Photoshop lightroom when I import images come up black after import, what's the problem?

  Since the last update to photoshop lightroom when I import images they come black what is the solution to this problem?

  Hi sabina_arslan,

  Please follow the steps below:

  1. Disable apply tone controls auto under Lightroom preferences > Presets tab
  2. Restart Lightroom and then import images again.

  Kind regards

  Claes

• Hi, I installed the creative cloud, but when I download Lightroom CC, the browser indicates that the program is downloaded, creative cloud appears, but overall the program is just a black screen, I do not see what I am downloading or the status of downlo

  Hi, I installed the creative cloud, but when I download Lightroom CC, the browser indicates that the program is downloaded, creative cloud appears but overall the program is just a black screen, I do not see what I am downloading or the status of the download, I use a pc

  You must install Ligjhtroom cc app to app Adobe Creative Cloud.

  See the link below:

  https://helpx.Adobe.com/creative-cloud/KB/black-screen-sign-in-creative-cloud.html

• 5 Lightroom slideshow displays a black screen

  When I saw or make a slideshow in Lightroom 5 I see a black screen. That I tried using different parameters, images, lengths and with the show registered or unregistered, all with the same result. In a preview, I see performing advancing through the slides; everything remains black.

  Sometimes (unpredictable), the screen is not black, but rather two colors or color separated diagonally washes.

  There are no videos in the salons. (A black screen for a slideshow with a video as the first slide is a known problem mentioned in the Lightroom Journal.)

  Export to PDF works correctly. An exported video shows a black screen.

  (Mac Pro, OS X 10.7.5, Radeon X 1900 XT video card)

  Hello

  I got the screen black slideshow also.  I fixed it by checking (when the slide is open) model of browser on

  to the left of the screen and selecting "Default +" click it, it highlights not so maybe I unchecked it somehow.

  Before that, I cleaned the computer for the video card fans would be cool.

• Lightroom slideshow 6 - black screen :-(

  I tried to create a slideshow in LR 6.1 and 6.1.1 of LR and if I tried everything
  I see only a black screen
  I chose 5 or 50 photos always the same result
  black screen

  Hello

  I think that the problem is resolved by updating the graphics card.

  Thank you

  Jitendra

• Satellite L850D does not start - black screen

  Ok.. My wife L850D had problems with black screening started upward after the toshiba screen.

  I ran a few different utilities, including a reset... it all started about 3 weeks after the victory 8.1 upgrade.

  Rang technical support who kindly informed that because we put 8.1 on that he cancelled the guarantee. (btw nice guy)
  Then refused to help.

  And went and reloaded Win 8 of my happens, just to see if it was a problem of hardware, software.
  (yes I know, but it must have been only temp).

  It starts fine, sitting there for centuries without problem.
  It wasn't until I downloaded the drivers toshiba, (Yes the good) did a reboot and hey presto. black screen again.

  A little, this would imply that there is a problem with the drivers of toshiba?

  OK so the wife decided screw it, put Win 7 on it.
  Restarted with disk in. sat and sat. Google finally informed me that I had to disable secureboot and put uefi in the csm.

  OK fine, went into the bios, off course start, changed to the csm uefi and restart the computer.
  Now I get nothing; screen all turns on, fan starts, cd rom shots on and nothing stops down immediately if I push the power button.

  I pulled the battery, external and internal, let rest for half an hour and still the same thing.

  Any ideas?

  The history is for me a little confused so let me start from the beginning with some basic stuff.
  In your ad write you didn t what model do you have exactly (L850D-xxx) and I can't check the specs of the laptop but I presume that this laptop comes with preinstalled OS, probably Win8.
  Laptop with factory preinstalled OS that includes all the necessary drivers and tools and utilities. One of them is Toshiba Recovery Media Creator. With this tool, you can create a recovery (DVD or USB) media and it lets reinstall the original OS if it s some problem and HDD recovery does not work.
  Best option now would be to use these media and install original recovery image. Did you create this recovery media?

  Generally speaking when you new notebook you do not have to use the original OS. You can install anything you want, and it has nothing to do with security. You can install any OS, all supported operating systems. So I do not understand how you could get info from technical support.

  In any case, try please connect your laptop to the power supply and restart laptop. What exactly happens? See Toshiba welcome screen? Try pressing F12 repeatedly. There any reaction?

• 15 - af127ca: NUDITY - drivers BLACK SCREEN

  I tried updating to the latest video drivers from the HP site and all I get is a black screen...

  I restored my system to correct the problem. any suggestions on upgrading my graphics? the amd Web site those cause too many issues with stuff.

  Driver version: 15.201.1101.0 installed

  Hello @ARCTICWOLFMEDIA,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the graphics drivers and wanted to help you!

  Have you tried to update or restore the BIOS?  You can use the following to help you, if necessary: HP Notebook PC - BIOS recovery

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• B540 TDR and black screen on startup

  Hi all, I bought a B540 in April a power works fine until end of July when it began to show the error "display driver has stopped working and has recovered." a few days later I let him (I have need as a wifi station to connect devices remove) and after a few hours of work, when I came back, the screen was off and there wa no way to turn it on. I press the power button for a few seconds to turn off the pc and he died. When I turned on, the computer started but the screen is off (not the 'lenovo' logo was shown on the eve) but everything else seemed to work (play plug/unpluging usb external hard drive the sound of the carachteristic). I turned off again and wait ten minutes before the market again, this time above the 'lenovo' logo was shown, but it seems that the pc failed to boot win 8. I unlplugged everything, removed the power cord, wait an hour and after that all started ok but the error message "display driver stop" was still there. After this date the computer randomly starts ok or with the screen. Given that I do not use it intensively Isuspected some windows update to cause this strange behavior and I'm trying to use a point of restoration, until July 17, but the problem was still there. Then I removed all recent windows update of June on, and I realized that in one case, it was not possible (i.e. the "remove/uninstall" button not showed that KB). I googled around and found the subject KB has been reported to broken system and the only way to react was to use a DOS command to reatore a new installation of the system. I did and actually everything works ok for 2 days (one day, I actually use the PC all day to upload stuff to iternet it to work). Unfortunately, after that day, everything seems to repeat: new 'pilot not resposinding to display' and a black screen at startup.

  Please consider that the system is quite new and clean (only 3/4 months of life) and everything works fine until end of July. What do you suggest me?

  
  

• Black screen with blinking cursor! tried everything!

  OK, so this is going to sound familiar.

  I was on my computer when (it seems that windows update force rebooted my system) my computer rebooted in the middle of doing me stuff, got the windows stop screen.  When it restarts I got was a black screen with a blinking cursor.  The only options on the splash screen that works are the program installation, diagnosis and menu start. For some reason, hit F11 to restore the system does nothing and it will pass just to the black screen. Another strange note is that simply type the power button it will stop, I don't need to keep it.

  (1) I went into the bios and restored the default values.

  (2) I called they sent me a microsoft repair disc.

  (3) I tried the Startup Repair, which would have finished enough instantly and tell me that no problem has been detected and if I recently fixed a device, remove and restart. Everything is attached are the mouse/keyboard factory.
  (4) I've tried many system restore points and they all failed. nothing has worked and all generated the error: (0x800700b7)
  (5) I made this

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  When the pc still doesn't load, I put the repair back disc in and got an error message windows boot files where invalid and had the ability to repair and restart or cancel.  After trying blaze these and try several BCD I built always get the same flashing cursor.

  (6) I reloaded windows on a separate hard drive and scanned all viruses, checked the drive to see if there was even loaded windows (out of curiosity because nothing works)

  (7) so everything is saved, but I have 5 years of programming, I don't want to lose or reload due to the download time.

  Is there anything I can try that will work?

  Windows 7 64 bit

  HP Pavilion AMD phenom processor 4 cores.

  motherboard, power supply, gpu, amd chip, all works with a different hard drive, but I really really really don't want a fresh reload

  Please haaalllppp

  Hello

  Try Rescue Kit Free Edition of Paragon.  Review its main features here.

• Blue Screen error-Kernel_Data_Inpage - dups then black screen blinking cursor Diisk reboot

  I have a Windows XP - Home Edition. My personl computer Compaq is 12 years old.

  The system displays a blue screen with letering white, it is said Kernel_Data_ Inpage Error and also tells me to remove caching and shadowing in my BIOS menu. ???

  He said that if I recently installed new software or hardware to uninstall it to see if that helps.  I'm not as far as I know, execept one vershion editing ADOBE.  I also removed some software like PON Bars and an old vershion of JAVA /.

  I did a system restore, but it does not help, and now my Internet Explorer crashes too!   I have to keep manually close the market system and after that I get a black screen, which requires a Reboot disk, Windows finally arrives, but will eventually, and the schreen blue WARNING appears. He said also he made a DUMP to protect my computer and stop.

  Most of the things see you on a blue screen of death (BSOD) is generic boilerplate stuff you see on just about all BSOD.  What is important is the few lines that you see under the heading technical information - and sometimes it is not enough to understand what is happening.

  After trying the suggestions of the engaged Microsoft Support Engineer 'expert', someone who knows how XP works may be able to help understand what is happening if you provide information on your system and your system crash dump files.  I do not see how these things suggested will give you clues about what causes your BSOD, but they are the "experts".

  The following looks like a lot to do, but if you do the best you can with it, your question will be resolved more quickly than to try some things:

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Please MS Answers, continue to make solving simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Your system seems to start OK and then crash or didn't he start not at all?
  Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.
  For information about video drivers, expand components, click display, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.

  It is sometimes easier just to download the memory dump files since your last breaks down on your SkyDrive (everyone has a SkyDrive for file sharing).   So can someone who already has Windows debugging tools to look at things and understand what is happening.

  Dump memory of recent crashes and BSOD files are usually in this folder (assuming that XP is installed on your C drive):

  c:\windows\minidump

  The files will be named something like this:

  Mini120311 - 01.dmp

  You need to download the latest... maybe 5-10 of the most recent crash dump files should be sufficient if you who have a lot.  If you do not have that much, send what you have.

  Getting started with SkyDrive:
  http://explore.live.com/SkyDrive-get-started

  Once you get your downloaded files and watch them on your SkyDrive, you need to 'share' your folders/files so that others can see them.

  Here is a link that tells you how to:
  http://explore.live.com/Windows-Live-SkyDrive-change-access-permissions-FAQ

  Then click on the button "insert a link".  When you click on that, a window opens that contains the link to your SkyDrive files.

  Copy the contents of the box "copy this link to share:" in selecting the content of the link (it will be all highlighted), press Ctrl + C (copy) and then come back to the forum and in your next message, press Ctrl + V to paste the contents of the link back here.

  What you paste the return will look something like this link on my SkyDrive:
  https://SkyDrive.live.com/redir.aspx?CID=6a7e789cab1d6f39&RESID=6A7E789CAB1D6F39! 311

  While you wait, please follow these steps:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time):

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  They can be uninstalled later if you wish.

• MY TOP of DELL Dimension 1100/B110 DESKTOP will not start windows black screen of death.

  I had my computer when there was a power failure in a storm, it was on a surge protector but the next day I turned on the computer, it was clicking on and then he gave me a black screen with the time system and configuration system date drive and other different things, but no screen with safe MODE or something like that. and I have no enternet, here where I live. Help me please.

  MY DELL DESK TOP Dimension 1100/B110 STARTS at THE BEGINNING, GOES THROUGH THE MAIL. SO NOT ME NOT LEFT IN THE SAFE MODE SCREEN, IF I PRESS F8, IT GOES TO ANOTHER SCREEN WHICH ME SAYS THAT MY HARD DRIVE CANNOT BE FOUND. IF YOU GO TO ANYTHING ON THIS PAGE IT TELLS YOU THE "PRIMARY MASTER" PLAYER IS... HARD DRIVE. AND THE MAIN SLAVE DRIVE IS... OFFAND STUFF LIKE THAT BUT NO SAFE MODE OR ANYTHING. MY SCREEN IS A BLACK SCREEN. AND WHEN I START THE COMPUTER THERE AS A TRIGGER FOR A BIT BEFORE I GET THE SCREEN I GET. WHAT SHOULD I DO?

  Hello

  · You have the Windows XP Setup disk?

  You can follow the steps in the below links which will help you solve the problem.

  Link: "operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer: http://support.microsoft.com/kb/321626

  Computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

  If you do not have the disk to the operating system, then you may need to contact the manufacturer of the computer. Link: http://support.dell.com/support/index.aspx?c=us&l=en&s=gen& ~ ck = mn

• Black screen after the windows login

  Hi, I have a HP Pavilion DV7 notebook with Windows 7 Home Premium installed on it. A problem I've noticed is that, once I connect to windows during a boot, the screen is black for about 1-2 minutes. After awhile, explorer.exe would with desktop, taskbar and icons. I am concerned about this 1 to 2 minutes of black screen after the boot as it did not exist previously. I know I have options such as restoring the computer laptop back to the default state, or by using the system restore. However, I don't want to lose all my stuff, and with respect to the restoration of the system, I'm not sure when the problem happening, as it was some time ago. I have read a Microsoft article, (http://windows.microsoft.com/en-US/windows7/why-is-my-screen-black-when-i-start-windows-7) and tried all the steps with the graphics card and the regestry, but nothing seems to work.

  -Task Manager is able to open when the screen is black (shows explorer.exe running)

  -J' have the drivers on the HP support site

  -laptop is HP Pavilion DV7 3024ca

  You will need to login using the method of trial and error. Please uncheck all of the MSCONFIG Startup tab and restart the system. If the black screen issue is resolved, then check out an application every time and restart the system. This will help you to identify the program interfere.