Lightroom CC/6.3 slow down with use

Similar Questions

• End of Cup Video Clip off the power when send you first Pro CC 2014 to effects after 2014 CC and I slowed down with Timewarp?

  When I send a clip from Premiere Pro CC 2014 to after effects CC 2014 and I slowed down with Time warp the clip cut of 75% at the end of the video and display only the first 25% slow.  How can I fix this and how I round it travels in first pro to play the FULL slow motion video clip?

  Try adding effect temporal Deformation on an adjustment layer in AFX, rather than on the video it self.

• Why my iMac 27 "slows down with Sierra?

  I'm running an iMac 27 "(fin 2012) with 32 GB of RAM drive and 3 TB of fusion." Before loading to Sierra, Adobe InDesign CS6 launched and ran fast as most of the data have been stored in the partition of the flash player. After the installation of Sierra, I noticed the app stops or slows down when I click on the items in the Panel and I get the spinning wheel. Is it because Sierra sends data to Cloud Drive when I'm online, or is something else operating here? It is most annoying. I'll try to clear the caches etc. but I don't know what is happening.

  Photoshop CS6 seems OK.

  I always forget to 'CONTROL THE FONTS'. I use FontExplorer Pro to make sure that I only have the necessary fonts to work. I forgot to re - organize my fonts folders for system font numbers are reduced to the minimum and FontExplorer only loads the necessary fonts. I will do this job very long, but I don't know that it will solve one of the main problems. For more information on Mac OS X font management see site and information http://www.jklstudios.com/misc/osxfonts.html of Kurt Lang

• Slow down with games and video on a Satellite P100-286

  When to play games and watch the video of the computer really slow down. This does not happen immediately, but after a little while.

  I check the Task Manager to see if anything else is running and the dwrm.exe has a heavy load of CPU, add to the use of the processor of the game and the two pocessors are struggling, as seen on the gadget processors. The games are unplayable and video very bad when this happens.

  When none of those who are running, dwrm.exe is 02 CPU usage when either run dwrm.exe is 45 CPU.

  Is this a Vista problem? If anyone can help, I would be grateful or should I call Toshiba?

  Hello

  can you describe the programs you have on your system? Maybe theres some program that looks at your other programs (perhaps an Antivirus or a private firewall or something else) and suck your platform performance.

  A suggestion from me: try to uninstall some programs that you have installed and beware of what your machine.

  So, I have to say that Vista needs a lot of resources, and there are so many people who is angry and frustrated of stand-alone and Vista, so I am too.
  But let´s wait, because out of XP, it was the same thing with the first service pack they solve so many problems and triggered the performance of this system for anyone who can work now and is enjoying XP.

• Acer laptop computer slows down with Orion running in Vista

  I have the same problem. I use Windows Vista with my Acer and the laptop slows down and ends up hooking up often enough (despite the fact that I updated to 4G). When I did an extinction forced because I could not stop more that once I saw the Orion message runs. If I remove Orion in my system, will hit anything?

  Hi news,.

  Please provide more detail about the Orion program.  In addition, please see the following article to help with performance on your machine:

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• computer slows down with every automatic update of windows xp

  Windows automatically downloads updates for xp.  Computer slows down gradually with each update.  Windows ' temp' directory is filled with huge files, apparently to each update.  Is there a solution?

  .  Is there a solution?

  The empty user and the 'temp' system folders.

  1. empty " %systemdrive%\temp " folder.

  2 empty " %systemdrive%\%windir%\temp " folder.

  3 empty " %systemdrive%\Documents and Settings\%username%\Local Settings\Temp "

  06/23 / 1111:23: 47 am

• Computer slows down with 15 minutes of the session opening.

  Original title: very slow computer.

  My Vista OS slows down to about 15 minutes of logging. If I clean the registry, etc. I see a lot of files, namely .mdmp, .log, .wxi, .wer and .evm files. These occupy a lot of space and appear to be responsible for my computer slowing to a point where I have to wait about five minutes before I can click on my mouse again.

  Y at - it a fix for this problem?
  Thank you. Bob

  Hello

  Perform the steps mentioned below and check if that helps:

  Method 1:

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  See also:

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

  Method 2:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  See also:

  Improve performance by defragmenting your hard drive

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-performance-by-defragmenting-your-hard-disk

  Method 3: try to clear the history of the system

  Step 1: Clear TEMPORARY folder:

  a. click Start , type run in the start search box and press enter.
  b. type temp in the Run dialog box.
  c. delete all files in the temp folder.

  Step 2: Clear file folder:

  a. click Start , type run in the start search box and press enter.
  b. type folder in the Run dialog box.
  c. delete all the files in the folder %temp% .

  Step 3: Clear folder Prefetch:

  a. click Start , type run in the start search box and press enter.
  b. in the Prefetch folder, delete each entry, and then restart your pc.

  I hope this helps.

• IMac slows down with "safari web content (not responding)."

  I have an Imac mid-2010 running El Capitan. I constantly get a message on my activity monitor which causes my mac slow down and sometimes crash. When I leave the process on the activity monitor, my computer works better up to five minutes later, when it still happens once I wonder if some may be able to give me advice. I will include a screenshot of what I see on my activity monitor.

  Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide an overview of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• WRT1900ACS slow down with WPA2-mixed use

  For other people, I'm sure are going to face this as well:

  At least the current firmware (1.0.0.168229), my experience has been that turning on WPA2 Personal only idle speeds of wireless for my Galaxy 6 ten times.  For example,.

  WPA2 Personal only: 40 MB/s

  WPA2/WPA mixed personal: 400 MB/s

  It can be reproduced at will on my own - I swapped it and remade the test of speed 5 times now, with the same results every time.

  Given that most of the sites recommend that you set personal WPA2 only as a means to * increases * speed, I know that I'm not the only person who's going to run this.

  Just a update in the case that everyone is facing these issues.

  The 5 Ghz and 2.4 Ghz problem turned out be limited to devices on the 5 Ghz band is not able to see / connect to a Chromecast running on 2.4 Ghz.  Other devices do not have this problem of talking to each other.

  To resolve this problem, I went in the media Prioritization\Settings and activated the WMM Support, even though I have prioritization media himself disabled.  Also, I went to Connectivity\Administration and verified to allow users to disable access to Internet in UPnP.  That fixed the problem.  I don't know if changes were necessary or not - I have seen the suggestion in a forum about an older Linksys router and he did two of them before the test.

  The massive slowdown with the Samsung Galaxy s6 remains if I set the Security Mode to WPA2 Personal (only), but goes away when I set to WPA2/WPA mixed staff, and I'm happy to leave the Mixed value.

  That addresses all the issues that I've found so far with the router.  Other than its stable summer with an excellent signal.

• Connecting to a remote database (slowed down) with the password file authentication

  Hi all
  
  I was wondering if it is possible to connect to a remote database is stopped (idle instance) as user sys with sysdba privileges? It is said in the Oracle book - one to page 210 in the section - operating system and the file password authentication:
  
  Connection with authentication by password file or operating system is always possible, any State of the instance and the database are in and it is necessary to issue commands to START or STOP.
  
  Above indicates that it is possible, but I can't do it.
  
  I managed to connect to the remote database that was in mode nomount (see below for more details).
  
  When I first tried to connect to a remote database (idle instance) using the password file authentication, it gave due to error:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 13:59:28 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  ERROR:
  ORA-12514: TNS:listener is not currently of service requested in connect
  descriptor of
  
  Enter the user name:
  
  After the start of the database in nomount mode I was getting following error:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 13:48:36 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  ERROR:
  ORA-12528: TNS:listener: all appropriate instances are blocking new connections
  
  Enter the user name:
  
  Then I added the clause (UR = A) my listener.ora file and after that it work and I was able to connect:
  

  sqlplus sys@ORCL as sysdba

  SQL * more: Production of the version 11.2.0.3.0 Fri dec 21 14:04:49 2012
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  Enter the password:
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  
  SQL >
  
  I have all the entries of necessairly in tnsnames.ora on my local host.
  
  Also, I have no problems when connecting as user sys with sysdba when the DB is open, but can't get it working on an idle instance.
  
  I know I can use OS authentication but want to know if there is a mistake in the book or I'm doing something wrong.
  
  Kind regards
  Dawid
  
  Edited by: 978239 2012-12-21 06:24

  I was wondering if it is possible to connect to a remote database is stopped (idle instance) as user sys with sysdba privileges?

  You can, but you need to statically register the database with the listener.

• REGEXP_SUBSTR, CONNECT BY slowing down with value

  I have the following sql code

  SELECT distinct q.broker_ID, q.user_ID, q.MGC_BREACH_ALERT, REGEXP_SUBSTR (nvl(q.CGC_ALERT_THRESHOLDS,0), "[^ |]") +', 1, LEVEL) value

  Of

  (select u.broker_ID, t.user_ID, t.CGC_ALERT_THRESHOLDS, ATSD_USE_TRADERS t.MGC_BREACH_ALERT t, ATS_USERS u where u.user_ID = t.user_ID and t.sponsored_user = 1) q

  CONNECT TO  (REGEXP_SUBSTR (nvl(q.CGC_ALERT_THRESHOLDS,0), "[^ |]")) +', 1, LEVEL) IS NOT NULL)

  order by 1

  When all the values in the table has CGC_ALERT_THRESHOLDS as two pipes separate values (for example 34 | 44) the query runs in less than 1 second.

  
  

  When the CGC_ALERT_THRESHOLDS are the three values of separate pipes (for example 34: 44 | 54) then the request takes longer than 30 seconds to complete.

  The table has only 150 lines.

  
  

  Can you please explain where I have gone wrong / or any other suggestions for improvements to this request?

  Hello

  Whenever you have a question, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the accurate results you want from this data, so that people who want to help you can recreate the problem and test their ideas.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

  Jones wrote:

  I have the following sql code

  SELECT distinct q.broker_ID, q.user_ID, q.MGC_BREACH_ALERT, REGEXP_SUBSTR (nvl(q.CGC_ALERT_THRESHOLDS,0), "[^ |]") +', 1, LEVEL) value

  Of

  (select u.broker_ID, t.user_ID, t.CGC_ALERT_THRESHOLDS, ATSD_USE_TRADERS t.MGC_BREACH_ALERT t, ATS_USERS u where u.user_ID = t.user_ID and t.sponsored_user = 1) q

  CONNECT TO  (REGEXP_SUBSTR (nvl(q.CGC_ALERT_THRESHOLDS,0), "[^ |]")) +', 1, LEVEL) IS NOT NULL)

  order by 1

  When all the values in the table CGC_ALERT_THRESHOLDS as two pipes separate values (for example 34: 44) the query runs in less than 1 second.

  When the CGC_ALERT_THRESHOLDS are three pipes separated values (for example 34: 44 | 54) then the query takes more than 30 seconds to complete.

  The table has only 150 lines.

  Can you please explain where I have gone wrong / or any other suggestions for improvements to this request?

  Whenever you are tempted to use SELECT DISTINCT, think very carefully about why you need it.  It is often a way to hide an error in the query.

  In this case, the error is using CONNECT BY on a multiple row table, without conditions PRIOR involving.  If you have 150 rows in the table, this means that you will

  150 lines level = 1,

  150 * 150 = 22500 ranks LEVEL = 2,

  150 * 150 * 150 = 3375000 rows = 3 LEVEL.

  ...

  Soon, which will be a large number of lines.

  You must change the CONNECT BY clause into something like:

  CONNECT BY REGEXP_SUBSTR (NVL (q.cgc_alert_thresholds, '0'))

  , '[^|] +'

  1

  LEVEL

  ) IS NOT NULL

  AND PRIOR SYS_GUID () IS NOT NULL

  AND PREREQUISITE uk = uk - uk is a unique key

  I can't be sure without your sample data.

• Why my mouse slows down when using LabVIEW 8.5?

  
  
  

• request will slow down when an additional filter is given in the list IN

  The following query works with 1 + seconds:
  

  SELECT t.Owner, t.Table_Name, c.Comments, f.Column_Name, Fc.Comments
  FROM All_Tables t,
       All_Tab_Comments c,
       All_Tab_Columns f,
       All_Col_Comments Fc
  WHERE c.Table_Name = t.Table_Name
        AND f.Owner = t.Owner
        AND f.Table_Name = c.Table_Name
        AND Fc.Owner = f.Owner
        AND Fc.Table_Name = f.Table_Name
        AND Fc.Column_Name = f.Column_Name
        AND t.Owner IN ('CASINO')
        AND t.Table_Name IN ('PHYSICALTABLEGROUPS')
  ORDER BY t.Owner, t.Table_Name, f.Column_Name;

  Query below seems to work at least + 30 seconds, I don't know how long it works:

  SELECT t.Owner, t.Table_Name, c.Comments, f.Column_Name, Fc.Comments
  FROM All_Tables t,
       All_Tab_Comments c,
       All_Tab_Columns f,
       All_Col_Comments Fc
  WHERE c.Table_Name = t.Table_Name
        AND f.Owner = t.Owner
        AND f.Table_Name = c.Table_Name
        AND Fc.Owner = f.Owner
        AND Fc.Table_Name = f.Table_Name
        AND Fc.Column_Name = f.Column_Name
        AND t.Owner IN ('CASINO')
        AND t.Table_Name IN ('ADMINS', 'PHYSICALTABLEGROUPS')
  ORDER BY t.Owner, t.Table_Name, f.Column_Name;

  As you can see the only difference is with 'IN' operator. Adding more item in the request list will slow down. Why is it slow?
  I have no privileges to run explain plan for this query, because I do not have certain privileges, I think for these system objects.
  Can you explain why the request will slow down with the addition of a table over in the list.

  I found the / * + ALL_ROWS * / tip to be useful on SQL join views great dictionary, including DBA_TAB_PARTITIONS and DBA_TAB_COLUMNS, that can develop enough long.

• Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  

  I did it with a 32GB SDHC UHS - I Transcend

  

  I do not recommend under OS X from such media, but it works very well. I was preparing for my review of the CPHA Yosemite and did not want to mess with the internal drive of OS X.

• Need with Photoshop CS6 13.0 slow down when you use MANY fonts.

  Hello

  I have problems with my installation of Photoshop CS6 extended 13.0. I have a large collection of fonts (more than 9000 - no joke) and Photoshop slows down bad whenever I do something that requires the use of the fonts/typing/text handling. I tried to disable the font previews. Photoshop is still too slow. I found a related thread and have additional questions about my situation:

  • Is there a way to mitigate the slowdown in Photoshop when something related to fonts?
  • Will be updated to the latest version of CS6 help? I should even try to update?
  • I have to reduce the number of fonts activated? If so, what is a good number to aim for?
  • Any advice on the management of fonts? The thread mentions Typekit - I do not have a full subscription to CC. Other tools of management of good police (preferably free) that you can recommend?

  
  Any help is greatly appreciated.

  9000 fonts?  How many people have you used last year?

  Not really sure what to tell you. Using a lot of fonts is a serious drain on system resources.  How long does Photoshop take to open?  Some time I think.

  TypeKit used to be a wonderful resource, but it has become very limited, if you only plan to photograph, and it would do precisely nothing to the management of your 9000 fonts.  Not a garbage.

  I used TypeDNA for awhile and well liked.

  TypeDNA: Creative with fonts