Lightroom CC hangs after installation.

Similar Questions

• Cannot start Lightroom 6 (standalone) after installation - stuck at the start with scope screen not responding error

  Hi all

  As stated above, I am unable to start Lightroom 6 (standalone) after installation. I am able to launch, but I'm stuck on the boot screen (lightroom logo 6) with bezel does not no error. Would be grateful for any help, thank you very much!

  Just a suite, I use Windows 7 (x 64). I talk with the cat from adobe and I was told to create a new Administrator windows account and reinstall LR by using this new account.

  It worked for me, I am able to successfully access LR 6 using the newly created administrator account. I tried to follow up with another request - I have what patches can implement to my current user account so that I can access LR 6 using that account (and not the new windows user account). Unfortunately, I was told that cat Adobe does not support LR 6 and I am directed to ask my questions here.

  Thanks a lot again!

• System hangs after installation of security.

  My Dell computer freezes.
  After the installation of Verizon's Internet security suite.
  I restarted and was ased by adobe acorbat to install a undate immediately.
  I did and rebooted again.
  Now when my office is ready, if I hit any key, the system hangs.
  Can I restore back a few days in "safe mode" may solve my problem?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• LR CC 2015 hangs after installation on Yosemite 10.10.3

  I've upgraded LR and Photoshop to the latest version

  Photoshop cc 2014 starts just fine

  but Lightroom CC when clicked on it, I see the screen of welcome for 0.5 seconds and then he left

  I tried to restart, uninstall and reinstall the same problem

  Help, please!

  Yes, indeed, it worked

  I left CC and restarting hasn't solved: but a true manual logoff, did the job

• Premiere Pro CC 2015 hangs after Installation on Windows 10

  Can I connect nome: Application

  Cast: Application error

  Data: 09/03/2015-18:33:41

  Identificacao Evento:1000

  Categoria da has: (100)

  Nivel: Erro

  Palavras - chave:classico

  User: N/A

  Computador: Andrell

  Description:

  Aplicativo falha com Nome: Adobe first Pro.exe, versão: 9.0.1.36, carimbo of data/hora: 0x55acd8dd

  Modulo falha com Nome: unknown, versão: 0.0.0.0, data/hora carimbo: 0x00000000

  Excecao code: 0xc0000005

  Ma da falha: 0 x 0000000000000000

  Processo falha com ID: 0 x 1244

  Inicio aplicativo falha com Hora: 0x01d0e69031d6466f

  Caminho aplicativo falha com: C:\Program Files\Adobe\Adobe Premiere Pro 2015\Adobe first Pro.exe CC

  Caminho modulo falha com: unknown

  Relatório ID: 6c4de777-507e-43a0-ae0b-092c998b6b79

  Pacote com falha nome completo:

  ID aplicativo relatius pacote com falha ao:

  Event XML:

  " < event xmlns =" http://schemas.Microsoft.com/win/2004/08/events/event "> "

  <>System

  < name of the provider = 'Error of Application' / >

  < qualifiers EventID = '0' > 1000 < / EventID >

  < niv.2 > < / level >

  < task > 100 < / task >

  < Keywords > 0 x 80000000000000 < / keywords >

  < TimeCreated SystemTime = "" 2015-09 - 03T 21: 33:41.000000000Z "/ >"

  < EventRecordID > 59755 < / EventRecordID >

  Application of < channel > < / Channel >

  Andrell < computer > < / computer >

  < security / >

  < / system >

  < EventData >

  < data > Adobe first Pro.exe < / data >

  < data > 9.0.1.36 < / data >

  < data > 55acd8dd < / data >

  < data > unknown < / data >

  < data > 0.0.0.0 < / data >

  < data > 00000000 < / data >

  c0000005 < data > < / data >

  < data > 0000000000000000 < / data >

  < data > 1244 < / data >

  < data > 01d0e69031d6466f < / data >

  < data > C:\Program Files\Adobe\Adobe Premiere Pro 2015\Adobe first Pro.exe CC < / data >

  < data > unknown < / data >

  < data > 6c4de777-507e-43A0-ae0b-092c998b6b79 < / data >

  < data >

  < / data >

  < data >

  < / data >

  < / EventData >

  < / event >

  10 Windows system

  Hi Andre,

  Try disabling the AMD card from Device Manager > display adapters and check if it works.

  Also, go to C:\WINDOWS\SYSTEM32

  Try to rename amdocl64.dll to old_amdocl64.dll and check that it works.

  Vinay

• Cannot start Lightroom cc (2015) after installation

  Version again, but it does not start.

  Have you tried logging in your CC desktop app, then logging put it back? Stop/restart won't work, but logging out and back in must. See here: you connect, disconnect | Creative desktop application Cloud

• Hi, I have to Malaysia, I'm trying to load down the lightroom and cc photo shop trial for the test. but after installation I know is English version! for me, I want to use the version Chinese, how can I change the version English version Chinese. Thank y

  Hi, I have to Malaysia, I'm trying to load down the lightroom and cc photo shop trial for the test. but after installation I know is English version! for me, I want to use the version Chinese, how can I change the version English version Chinese. Thank you

  Hi Alexl2684899,

  Please visit the below mentioned link:

  Change the language of Adobe Creative Cloud applications

  Let us know if that helps.

• After installation 6 Lightroom, my C drive are full

  I just downloaded and installed 6 Lightroom in my drive c. (it had about 48 GB of free space).

  I had Windows 8.1 system with 2 drives C:SSD GB 118 for the operating system and programs, D: 1 TB of data and image bank.

  Before installing the Lightroom6, the free space was about 48 GB.

  After installation and support for Lightroom, it displays a message box and mention "does not enough space in the C drive. He asked 20 GB or more space.

  Lightroom6 installation should not charge 48Go.

  What is the problem and what should I do?

  In the LR Preferences dialog box, tab "file management", check your settings on the position and the size of the Camera Raw Cache.

  In the catalog settings, 'file manipulation tab, check your 'opening of cache' settings.

• Premiere Pro CS6 installation appears to hang after 20 minutes. 36%, there is a resolution?

  Premiere Pro CS6 installation appears to hang after 20 minutes. 36%, there is a resolution?

  Manager of adobe application you use?

  If so, uninstall and then reinstall: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773

  If not, check your installation log files: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

• Lightroom 4 - "assertion Failed" error after installation

  I recently upgraded from 3.6 to 4.  Previously, I tried to install the beta 4 Lightoom and tried to open a 3.6 catalog.  When it did not work, I uninstalled everything that Lightroom beta 4.

  Now, when I installed Lightroom 4 (upgraded version), installation takes place without incident.  However, I can't open the program without crashing.  The error message is "assertion failure" indicated that additional details about the error.

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: lightroom.exe

  Application version: 4.0.0.10

  Application timestamp: 4f45ddd8

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7601.17725

  Timestamp of Module error: 4ec4aa8e

  Exception code: c015000f

  Exception offset: 000000000006fd5c

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  I guess it has something to do with my previous beta installation of Lightroom 4 leftover (which has subsequently been uninstalled prior to complete installation of Lightroom 4).  Does anyone know where the catalog is located by default and if I can solve this problem by deleting / renaming the catalog (if that's the problem).

  Thank you

  OK it's corrected now.  Locate the file catalog Lightroom 3 and opening it in Lightroom 4 (right click and choose the program...) prompted me to update the catalog.  This solves the problem

• Thunderbird crashes after installation of vn 38.4. Solved. Cause - bad record?

  (This question was published only because I could not respond to existing similar questions without registering first.)

  Problem was apparently a Thunderbird randomly hanging after automatic update to 38.4 on Windows 7 Enterprise. The process of dropping out/no response took place a few minutes after start of TB, compose messages, send or download of IMAP mail.

  Shortcut to the final solution - probably corrupted files or folders at the OS level.

  For those who are conducting similar research I also watched the references linked below.

  En route to the solution, various obfuscation were met, all of which were interesting but NONE OF THESE solved the problem of the suspension, namely:

  -back to Thunderbird 38.1 extracted from Mozilla's FTP repository

  -Disable all modules in SafeMode as suggested in posts below

  -deactivation of reminders on calendar, pop ups and sounds like suggested in the posts below

  -turn off sounds (in the systray) as suggested in posts below and new mail alerts

  -Discover, finally, only one of the half-dozen or so synchronized account IMAPs has caused the problem, which is an account Exchange-synced via the excellent DavMail (Davmail upgrade to the latest version was another diversion)

  -assuming that the compaction of TB was not his work and that he is too much vacuum/zombie files left lying around, leading to a redundant cleanup using Thunderfix (http://www.parhelia-tools.com/products/thunderfix/thunderfix.aspx), was nevertheless his cleaning of employment but not a solution

  What worked then...

  The procedure of backup profiles recommended TB in Thunderfix and elsewhere led to discover that the copy of Windows has won at least one file during the copy. Suspecting lower level corruption, I ran chkdsk D: /f (since all data are on D: and not on C: with the operating system). No major problems found aprt of 4 files analyzed once again.

  I resorted to the use of SynckbackSE to do the backup instead, noting that one of the failures was Junk.msf. That and the knowledge that the account linked to Exchange was the likely to be the culprit, I restarted and deleted everything in IMAPmail\localhost\ (DavMail connects via localhost stored files).

  Restart Thunderbird (always on 38.1) and connect via DavMail pulled back all messages and folders from the source Exchange to resynchronize records localhost TB successfully. No need to use backup or same setting of TB.

  Will probably now improve return to 38.1 after a period of stability.

  After years of use of Thunderbird of the dowry of the year, it's nice to know that it was not primarily at fault.

  REFS:

  Thunderbird starts by does not respond after the update to version 38
  https://support.Mozilla.org/en-us/questions/1073169

  Thunderbird crashes, hangs, or freezes often and seemingly randomly
  https://support.Mozilla.org/en-us/questions/1062142

  Why Thunderbird freezes my computer after installation of exit 38 RESOLVED:

  hardware acceleration = suspended new pop ups (bug message notification

  1186755)
  https://support.Mozilla.org/en-us/questions/1068495

  Thanks for the info

• HP Pavilion DV6-2106EA hangs after the insertion of son wired CAT5 (internet)

  HP Pavilion DV6-2106EA hangs after when inserting the cable wires CAT5 for wifi internet works fine

  or wireless works fine. Need help

  Hello

  Unplug your ethernet category 5 cable.

  Download the LAN driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46504.exe

  Then, in the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.
   
  sfc/scannow               (Note that there is a space between sfc and /)
   
  Let the entire process, then the output type and press ENTER.

  Now, right click on the installer you downloaded and select "Run as Administrator" to launch the installation.  When finished, restart the computer and try to connect the cable again.

  Kind regards

  DP - K

• The DirectX Web Installer hangs during installation of the components

  I try to get several games running, but am stuck by the demands to DirectX 9 c. My machine is Windows 7, so it's DX11 installed. I went here to download the web installer:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  When I run the installer, it downloads the components, then hangs on "Installation of components. It displays the message "copying files...". "and the 1.0.2910.0/Microsoft.DirectX.Direct3DX.xml

  One of my CPU is maxed out running dxwsetup.exe * 32 and this for hours. My computer is a Dell with Windows 7 64 bit.

  Are there instructions anywhere to update DirectX to hand?

  Thanks for any help.

  Steve, thanks for your suggestion. Running at startup using the minimum does not solve the problem, but it got me thinking in the right direction.

  I finally put in the Win7 disc and 'fix '. It is really a re - install, but the programs and data are stored.
  It took a few hours to go through the installation, but after that, I ran the DirectX Web Installer smoothly. Played some BioShock 2 last night!
  Thank you

• Windows Genuine Advantage Notifications stalls to "execution of process after installation.

  Hello.

  On a corporate network, with a licensed copy of Windows, I just finished installing a load of updates that a PC has missed in the last months or years.  To restart, a window titled "Windows Genuine Advantage Notifications".  I click Next and it works fine, up to 80%, then it hangs at "running the process after installation" and never finished.  It is present each time that I reboot and reconnect.

  How can I do complete, or stop to run to the log in?

  Thank you

  Steve.

  1. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  2. Restart then open IE (only) to http://windowsupdate.microsoft.com . Select CUSTOM and allow the analysis to be performed. If KB905474 is available now, deselect / uncheck and then hide it.

  NB: KB905474 may be listed in the optional software category on the left side. If an update of root certificate is listed there, also, install it to take full advantage of the integrated IE security.

  3. post a status report in response to this topic.

  PS: Are you "COMPUTER service" or SysAdmin for your company?

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer hangs after installing windows updates...

  computer hangs after the installation of update.  Full system restore and the computer worked fine for a week. Has started having problems still... verified and automatic updates for windows have been downloaded and installed today. Confused about where to go from here. Help, please. Thank you!

  To be clear, the issue is not appeared since the updates have been installed one at a time, correct?

  KB2447568 is A compatibility view list update is available for Windows Internet Explorer 8:23 November 2010
  The KB updates a file in Internet Explorer.
  There is a small chance that Trend Micro has a conflict with the update. If this is the issue, then there would be more posts on this topic.
  This looks like a temporary glitch occurred.

  The only suggestion I would make is that when there are a bunch of updates, as there was in December, then it would be better to install the most complex by themselves.
  This would mean that changing setting Windows updates for "download updates for me, but let me choose whether to install them.
  For example, the cumulative update for Internet Explorer, KB2416400, would be installed last, and by himself.

  And, since you pick a time to install updates that have been previously downloaded, then you can install them in groups of 4 and If it is another problem caused by them or their installation, you will be able to refine specific update was the cause.

  Expert MowGreen Windows IT Pro - consumer safety