The DirectX Web Installer hangs during installation of the components

Similar Questions

• Why Creative Suite 6 Design & Web Premium hangs up during installation?

  I just bought Adobe Creative Suite 6 Design & Web Premium and it hangs during installation. It gets 8% complete during the installation of Microsoft Visual C++ 2008 Redistributable Package and works more just. What's wrong?

  The problem was that my anti-virus software prevents a correct installation.

  Simple difficulty but at 3 AM not so simple to deduce.

  Thank you for your response.

• Satellite Pro A10 hangs during the installation of Win XP

  Hi guys,.

  just thouth I would ask why my new laptop will not install XP.
  Only, it crashes during installation. No n' achete purchased on this occasion, had no operating system installed.

  I wonder if it's a driver problem, using my xp disc I bought, but like I said that just, it will hang during installation.
  What I need to intergrate drivers somehow?
  I'm guessing that this is the problem?

  If so, how do I?

  see you soon

  I really wonder that your new laptop is probably produced about 5 years ago. ;)

  In any case, to install WXP use WindowsXP SP1 installations CD (factory settings). If you want to discuss a little more please explain to us what exactly is happening.

• I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?

  Hello

  1. at what stage of the installation, the computer crashes?

  2. what operating system was installed on your computer prior to this?

  If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:

  Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase

  Windows XP does not meet the Message "Setup starts Windows XP"

  Hope the helps of information.

• Patch for KB2545850 hangs during installation on Windows Server 2008 R2 Standard 64-bit

  Hello

  I have a server with the issue detailed in KB2545850.  I downloaded the fix Fix370193 (https://support.microsoft.com/en-us/hotfix/kbhotfix?kbnum=2545850&kbln=en-us) and tried to install it but it seems to just hang during installation.

  I tried several times and it fails every time.  No errors are displayed or saved, he's right there with the display of progress bar.  The Cancel button does not cancel.

  Restart the server results it starts successfully and I had to go back to a snapshot.

  I tried to let the software update apply for 16 hours with no luck.  Someone has seen something like this before?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• After purchasing the software to export PDF online when I try to perform a "file/save under ' when viewing a document on the web, it hangs to the top of the windows Explorer.  I get "file save as - does not.

  After purchasing the software to export PDF online when I try to perform a "file/save under ' when viewing a document on the web, it hangs to the top of the windows Explorer.  I get "file save as - does not.

  Hi douglash21414001,

  I think maybe it's a coincidence, that nothing is installed with ExportPDF, so nothing should have changed your web browser. That said, you can clear the cache of the browser and then re-open your browser. (What browser do you use?)

  You can also try to restart your computer, if the browser is restarted does not solve the problem. But still, I don't think that this problem is related to the ExportPDF.

  Please let us know how it goes.

  Best,

  Sara

• inspect the remote web iOS hangs on dps.store.getPreviewImage

  How do you deal with remote web inspect hangs on the breakpoint but js code appears as spinnging wheel?

  I'm trying to understand why my picture is not displayed, but everytime when I try to remote debug the code JS it crashes... I can see the stacktrace left of safari's web Inspector, but not the code JS.

  Any benchmark?

  var productID = "com.example.dpscustomstroefront";          

  for (folio in foliodata)           {               

  var folioID = "folio-"+foliodata[folio].id;                 

  var folioDiv = document.createElement("div");                 

  folioDiv.setAttribute("id", folioID);                 

  $("#folio-target").append(folioDiv);               

  var imgElement = $('');                    

  imgElement.attr('class','withStyle');               

  // imgElement.attr('width',300);               

  if(foliodata[folio])                {                    

  adobe.dps.store.getPreviewImage(productID, false, 1024, 768, function(data) {                         

  var result = data && data.result;                         

  if(result == "succeeded") {                              

  imgElement.attr('src', data.path);                          }

  else {                              

  // console.log("An error occurred");                          }                    

  });                                                     

  var folioElement = $("#'"+ folioID + "'");                    

  folioElement.append(imgElement);               

  }                

  }

  For showcase custom problems, I suggest calling Gold support. You can find at http://digitalpublishing.acrobat.com/, in the Middle at the bottom of the page.

  Neil

• Clean Windows 7 install hangs during expanding windows files

  well, so that's what I've done so far, I have downloaded the kit of the student digital river, I originally ran Windows xp 32-bit, so when I ran first the exe download, it gave me the error of not being able to record in a single folder to read and what not, but I followed the suggestions on the forums to move forward a burn on a startup disk expandedsetup folder in converting it to an iso, which I did, I installed the first time but missed the option to format my hard drive so my old files were still there, however, once got installed win 7 I wasn't able to connect to internet for some strange reason and I couldn't understand it, so I decided to take the 3 files I downloaded originally from digital river and try their unpacking on the 64 bit OS now I had installed, it worked fine this time without any errors, so I moved the folder expandedsetup to my laptop and he burned them on a dvd as before, this time I boot from the dvd and do a clean install, it installs again very well, but once I login in the OS and I am getting started with things once again everything is grinding the long, I tried to restart and it does not work, this time it froze just a black before the paper screen, so once more, I started from the dvd and tried to do a clean install, but this time, he begins to hang during the part of expanding windows files, so I decide to make another disc using the second expandedsetup folder thinking that perhaps a new one was a bad burn, this does not work either, it takes about 14% of full on the extension of the windows files and then he told me that the files is not found, so I tried the second drive once again, we only got 4% until it gives me error on files is not found , so I put the first early in and try and suspension 4% right now and I expect to give me the same error, I have really no idea of happening, there are too many variables, but I tried to evaluate each of them, would be - this related material? my computer is compatible for win 7 64 bit, I ran the Upgrade Advisor before you buy, so I know that my hardware can run it, I think it's my dvd drive or the hard drive, but they both seem to run fine otherwise, any help would be appreciated

  Hello Impoc,

  Thanks for posting on the Community Forums of Microsoft Vista.

  Installation may stop if the system cannot copy files. Here are some possible causes and solutions for this problem:

  ·     Your Windows installation disc is scratched, smudged, or dirty. Clean the disc with a soft cloth, insert it in the CD or DVD drive, and then start the Windows installation again. If your installation disc is damaged, you may need to replace it. For more information, go to How to replace Microsoft software or hardware lost, broken or missing on the Microsoft Web site.

  ·     Your CD-ROM or DVD drive is not working properly or the disk might be vibrating too much for the laser correctly read data. For more information about this problem, see your hardware documentation or contact the manufacturer of the CD or DVD drive.

  ·     If your computer has multiple CD or DVD drives, your computer may attempt to locate files on the wrong drive. If your computer has a feature to disable CD or DVD drives that are not used, turn off readers that you don't use. Otherwise, try to insert the disc in a different drive, and then restart the installation.

  ·     There is a virus on your computer. Run an antivirus program to scan your system and to identify the necessary repairs. Don't forget to disable the antivirus before you start the installation again.

  Also, it is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  1. wait 10 minutes to see if the installation continues. Look at the led on the hard drive (often a small light on your computer that blinks when your hard drive is running) to see if there is no activity. If your hard drive seems to be working, the installation must be current. If your hard disk doesn't seem to work, go to step 2.

  2. If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  3. If you have compatible hardware and your computer still stops responding, disable any unnecessary hardware. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If you have more than 1 Memory stick on your computer, try to remove all but one RAM stick and try to install Windows 7.

  If the computer still stops responding during installation, you may need to contact your computer manufacturer or retailer to check if the computer is compatible with Windows 7.

  Also check out the link below to learn more about solving Windows installation problems:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Windows-installation-problems

  Note: This article is related to Windows Vista. However, you can follow the same steps with Windows 7.

  If the installation fails after following the steps above, try to note the exact error message and provide the same.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't download the components of a microsoft Web site.

  OT: Download Hang?

  I am trying to download the components found at this link:

  https://www.Microsoft.com/en-us/download/confirmation.aspx?ID=26368

  Yet, when I do it, the download starts ever. Help?

  No, it is not do right click on the file.  A window appears at the bottom of the page when the download starts.  You then have the option to run, save, or save as.

  From your statement, I understand that you managed to download the file with Internet Explorer.  Is this correct?

• How to remove the components?

  For some reason I can't do throw DBCA, also during the installation I couldn't uncheck the...

  

  Hello

  It's normal. You can not remove the components if you install a database of the container of 12 c (A.K.A Multitenant).

  I have raised an idea to allow. See: Allow, deselect the options to database during the installation of Oracle shared 12 c

• LV TEN F5 SP1 does not appear in the components for deployment...

  Hello

  Just migrated my x 32 to x 64 TS2014 TS2013 LV2013 & apron & LV 2013 x 64. I'm now trying to build a new installer for deployment for my test stations, but LV RTE SP1 F5 does not appear in the components for deployment, even if it is properly used as adapter labview Teststand sequence editor... why?

  I can see RTE SP1 F3, but not F5...

  If please see attached picture to see my setup teststand (showing the labview adapter) and the list of parts available in the deployment utility.

  Thank you very much for the help.

  C.

  Hello

  Thank you for the information.

  As a temporary solution (as of 2014-12-04), I manually installed the SP1 LV F5 RTE 2013 on the test station.

  Here you can find the downloadable version:

  http://www.NI.com/download/LabVIEW-run-time-engine-2013-SP1/4539/en/

  Thank you and have a great day,

  C.

• What are the components of Windows XP and what is their purpose?

  What are the components of windows and what are their purpose?

  Here is a list of Windows components:

  http://en.Wikipedia.org/wiki/Windows_components

  After Windows XP is installed on your computer, you can use the Add / Remove programs in Control Panel to add a Windows component that was not included in the original installation, or to remove an existing Windows you need is no longer.

  Some Windows components may require a genuine XP installation to install/reinstall CD.

  If you are having problems with a component of Windows, tell us about your operating system, Service Pack and describe in detail the nature of the sentence.

• I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  Make sure you have both. (1 of 2) file .7z and .exe file (2 of 2) under the same folder files

  Then double-click on the .exe file (2 of 2) it will start the installation process.

• collection master cs6 installed won't install all the components for photoshop, after effects, or FB and yet everything is fine

  collection master cs6 installed won't install all the components for photoshop, after effects, or FB and yet everything is fine

  Alanh61734259 summers - receive you specific error messages in the installation log files?  You can find details on how to locate and interpret logs troubleshooting installation with install newspapers | CS5.5, CS5, CS6, CC.  You are invited to post specific errors that you will discover in this discussion.

• The components common install fails for Essbase Server in a distributed environment.

  Hello everyone, I am trying to install essbase server (V 11.1.2.3) on Red hat Linux 6, 64-bit. Already installed on Windows 2008 Foundation Services. Nothing has yet been configured. On the installation of Linux, the installation of common components to fail. I looked around, in forums and in Oracle Support (Doc ID 1360561.1) and it looks to be a known issue. We discussed that it is due to a small number of missing on the linux server RPM. But I couldn't find a definitive answer as to the exact package that it was, or if it is a problem of RPM in the first place. Could someone please shed some light on what exactly is causing the problem and what exact package is necessary. Thank you.

  BTW, this is the mistake of common-CMO - install.log

  **********************************************************************************************************************************************************************

  (July 2, 2013 11:53:33), install, com.hyperion.cis.OCMOracleHomeSetup, dbg/software/hyperion/EPMSystem11R1/ccr/bin/configCCR - r:

  STDOUT:

  STDERR:

  SH: / software/hyperion/EPMSystem11R1/ccr/bin/configCCR: no such file or directory

  Exit code: 127

  ***********************************************************************************************************************************************************************

  And this is the error in the installTool-install - stderr.log

  Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException

  at javax.swing.plaf.basic.BasicTreeUI.completeEditing(BasicTreeUI.java:2009)

  at javax.swing.plaf.basic.BasicTreeUI.completeEditing(BasicTreeUI.java:1974)

  to javax.swing.plaf.basic.BasicTreeUI$ Handler.valueChanged (BasicTreeUI.java:3637)

  at javax.swing.tree.DefaultTreeSelectionModel.fireValueChanged(DefaultTreeSelectionModel.java:629)

  at javax.swing.tree.DefaultTreeSelectionModel.clearSelection(DefaultTreeSelectionModel.java:570)

  at javax.swing.tree.VariableHeightLayoutCache.rebuild(VariableHeightLayoutCache.java:740)

  at javax.swing.tree.VariableHeightLayoutCache.treeStructureChanged(VariableHeightLayoutCache.java:626)

  to javax.swing.plaf.basic.BasicTreeUI$ Handler.treeStructureChanged (BasicTreeUI.java:3824)

  at com.hyperion.install.wizard.swing.FeatureTreeModel.fireStructureChanged(FeatureTreeModel.java:511)

  at com.hyperion.install.wizard.swing.FeatureTreeModel.fireStructureChanged(FeatureTreeModel.java:520)

  to com.hyperion.install.wizard.swing.TreeSelectionFieldSwingImpl$ 11.run(TreeSelectionFieldSwingImpl.java:311)

  at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:84)

  in java.awt.EventQueue$ 1.run(EventQueue.java:602)

  in java.awt.EventQueue$ 1.run(EventQueue.java:600)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  Thank you

  Ted.

  This is because COM is 32 bit and requires glibc 32-bit packages.

  Try running

  yum install glibc - devel.i686 glibc.i686

  See you soon

  John

  http://John-Goodwin.blogspot.com/