Lightroom cc import Canon 5DMKII camera does not show the RAW files

Similar Questions

• 6 Lightroom does not recognize the raw files of Nikon D800

  I have a nikon D800 and Lightroom does not recognize the raw files yet of this camera.  I've updated the LR software to 6.1.1 yet still cannot import files.

  Can you help me

  Thank you

  Ruben

  The D800 has been supported since Lightroom 4.1.

  You use an earlier version of the Nikon software to transfer files from camera to computer? Older versions are known to make Raw files unreadable by Adobe software.

  Try to download a version update of Nikon. Or use a different card for example reader method.

• Elements 9 does not open the raw files from my new camera

  Have a panasonic DMC-GX85.  My 9 items does not open the raw file and I failed in upgrading to 9.03 and camera raw 6.5.  Y at - it solution or do I have the latest elements?

  There are essentially 4 different solutions to this common problem with the older PES software:

  (1) upgrade to the latest version 14;  It's not free.

  (2) the software should come with your camera and download pictures on your computer;

  (3) your operating system may have some updates to download images from your camera.

  (4) use Adobe DNG converter and it is still free.  The latest version is:

  Adobe - Adobe Camera Raw and DNG Converter: for Windows >

  He must also watch this video to learn how to use the DNG Converter:

  I hope this helps.

• Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Need of this camera camera raw 8.2 or later. Cannot use this CS5 version. You will need to download the 9.1 free dng converter and convert your images to DNG version CS5 can handle.

  Using Photoshop | Digital Negative (DNG)

• LR 1.4 does not recognize the raw files of Pana LX-3

  I use LR 1.4 and I try to import my new Panasonic LX-3 raw files. LR does not recognize the file type - told me there is nothing to download. I downloaded DNG converter 5.4 with the hope that that would do the trick. LR does not communicate with the DNG Converter, or, well, I don't know what.

  Can someone tell me how to import LX-3 raw files in LR 1.4? I'd rather not spend the money to upgrade to LR 2.4

  Thank you-

  Use the raw DNG Converter to convert raw files to DNG (keep the original raw files). Then you can import the dng files in LR and they have to be posted.

• I have a Nikon D7200 and 12 elements does not read the RAW files. How can I to update or upgrade?

  Hi people. My 12 items does not read the update on the new RAW format Nilon D7200, a well known problem. In my view, that there is a new vintage Reader 9.0 for Photoshop Elements. Anyone know how I can get it? Thank you

  Very kind of you respond and I put your answer. PSE 13 accepts the ACR9.0 oyu know? TKS

• Lightroom does not recognize the raw file

  LIghtroom import my my new D750 raw NEF photos.  Help!  I had managed to do last week, and I thought that I shot raw and I just went and photographed my first wedding with her and I can't access the files.  Help!  I tried the DNG Converter also, and he says the same thing.

  Thanks, I found how to fix this problem.  I had not downloaded the last Capture NX and after I did I was able to import files.  Phewf!

• Export Audio Captivate, importing to 9 presenter does not load the published file.

  Hi all

  Quick back-story. We bought a subscription to Captive when they announced HTML5 support, but due to lack of devices supported, we also bought a subscription to the presenter who has a mobile app. Some of our content have been created using Captivate now these projects had voice over I had to export and rename audio files to associate with the correct slide. I went ahead and manually imported each individual audio file to the correct slide in the PowerPoint presentation.

  My problem now is when I publish the PowerPoint (2007) with 9 to present project does not charge that he has just the rotation he arrow. For some reason any the project works in "Preview" mode, but not when it is published. Is there a way to find the path where are stored the cache preview files?

  Any help would be greatly appreciated.

  Hi Jerry,

  Please check the following settings:

  GoTo Adobe Presenter > quiz > Manage > Reporting

  Make sure that AICC is not enabled.

  If the AICC report is enabled, it will not play in Destop mode.  Please disable the AiCC.

  If this isn't the case then plase share you sample file for me to [email protected] and will try to solve your problem as soon as possible.

  Thank you

  Sunil

  Adobe Presenter Engg team

• Camera does not show the extent and automation with Legacy 1394 drivers

  Hello

  I have a Guppy AVT Firewire camera and try to get this camera working on a new Windows 7 PC, I have here.  The PC is running Windows 7 Professional 32 - bit.  When I connect the camera to the computer, it installs the driver NOR-IMAQdx IIDC, the camera appears in the studio of measurement and automation (version 4.6.2) under the heading "devices OR-IMAQdx", and everything seems to work great.  However, I need to use the legacy driver.  When I select the "Legacy IMAQ IEEE 1394 IIDC" driver, the device disappears from measurement and Automation Studio.  Reboot of the camera or to disconnect and reconnect the camera do not help.  In the Windows Device Manager, the la camera camera shows that the use of inheritance OR IMAQ IEEE 1394 driver (11/10/2006, version 2.0.5.0 that day), and windows reports it as working properly.  However, it is not always on display of the measurement and Automation and my application cannot see the camera.

  Here is what I tried:

  * Update the NI Vision Acquisition version 2009.11 software.

  * Make the legacy NOR-IMAQ for cameras 1394 2.0.5 is installed

  * A tried the same device with the same software on an old PC running Windows XP and found everything works as expected it.

  * A tried a card PCI IMAQ 1405 in the Windows 7 PC, which works very well.

  * Search in the forums.  I found several references to this document which refers to issues where disappear from the camera of measurement and Automation Explorer:

  http://digital.NI.com/public.nsf/allkb/22AD45D8A5B053AF86256EB5003B2811?OpenDocument

  It seems that it might apply to my situation, however, the link is dead for me.

  Thanks for any help!

  I suggest you to install the bus driver 1394 AVT on your PC.

  This replaces the microsoft implementation of the 1394 Protocol and is better suited to the activities of the vision.

  You always can choose IMAQdx or old drivers.

  http://www.alliedvisiontec.com/EMEA/products/software/Windows/AVT-1394-busdriverpackage.html

  However, I'm not sure if it will work on windows 7

  Ben Engelen

• I downloaded DNG Converter 8.7 and as a standalone application, he does not see the RAW files of my 7 5 d Mark 2.

  I don't want to spend 11 items yet.

  When I got my 60 d, I had to install the DNG Converter and after a few uses, 11 elements began to see also.

  On a 64 bit Win7 PC.

  In the how to video I've seen that all show them the files in the folder selected.

  I just tried to convert without no files appear and he says that he has found and is now converting it to DNG.

  YES!

  Simply by selecting the folder was sufficient, does not need to open or to see the files.

  Weird, different works than when I had my 60 d.

  Thank you very much!

• Windows Movie Maker does not show the extire file

  original title: VOB's with Windows Movie Maker and Windows Media Player.

  Ok.  I have a DVD that was made of a VHS tape.  There are several VOB files only when you open with Windows Media Player are still drop and are less than an hour long.  I want to take out of hours of video clips and post them to YouTube.  I used WIndows Movie Maker to edit my videos.  When I opened one of the videos with WMM, it will display only 14:41 the vidoes and not all of it.  I've seen the proposed changes to the MPG or WMV file extension.  I made a copy of one of the VOB files and renamed the extension to MPG.  Now when I play this copy of this file, as it is now is only 14:41.  He did the same thing when I tried to change WMV.  I need to know how to get the entire file appears in Movie Maker.  I tried to use Any Video Converter but it will show up only there as a 14:41 file as well.  I copied all the files on the DVD also.  There are two of them. BUP and two. It is of the IFO files.  Here are the videos from a friend of mine who was a boxer.  He passed away this summer and I want to download these videos in tribute to him.  Any help would be great.  Thank you.

  Thanks for the info.  I was think there later that day and I was wondering why when I play all the VOB's to he it's all the same hour on video.  So I opened the first with Movie Maker and added then the following for her, there were five in total.  After you have added all the he composed the entire hour long video.  All I had to do is then save it and now it is in WMV format so now I can modify it.  Thanks for your good help.

• Vista does not recognize the RAW files to CF card

  I used my card reader on my desktop dell under Vista Home Premium for more than 2 years without problem. Now, when I put the card in the reader, he simply asks I format the card. The drive is on a USB connection. I recently added a second hard drive and moved the data to the new disk. Also, I stopped between 1 and 3 services, that I thought were unnecessary. The only other possible signs of a problem are only on media computer management / the media pool is "not recognized"; and a right click on the drive under Computer Management / libraries, I get a message "there is a problem with the removable storage service". Restarting the service has no effect.

  Try to assign a different drive letter in disk management. Probably the card tries to use his previous assignment of drive letter that is now used by your second hard drive. Or you can do it on the second hard drive.

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

• M Photoshop CS5 does not open the RAW of Canon 7 d Mark II files. CS6 will do that?

  My Photoshop CS5 does not open the RAW files from my Canon 7 d Mark II camera? CS6 them open?

  Hi terryi23618792,

  Yes, Terry, I think that your friend has not updated 6 CS PS to the latest version.

  • Open PS CS 6, click Help - updates and update PS CS 6
  • If this does not work, try direct link
    • Mac - Adobe - Photoshop: for Macintosh
    • Windows - Adobe - Photoshop: for Windows

  Concerning

  Rohit

• I have Lightroom 3 and Canon EOS 70 d. Support of RAW files?

  My version of Lightroom does not support the RAW files from my camera, Canon 70 d. Should I buy the new version of Lightroom, or is it possible to upgrade? Thank you

  Hi beatep,.

  Yes, you need to purchase the upgrade to the new version of Lightroom, because this device is not supported with Lightroom 3.

  Please read the article for the camera supported with Lightroom: supported by Adobe Camera Raw devices

  Kind regards

  Tanuj

• Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  I'm not an apple person.  I read on a few different forums that apple has changed what is called 'writing' in a recent update to apple.  You may need to find an Apple expert to show you how to make sure you are allowed to write to files or locations on your computer.