Lightroom does not detect my D800 when trying to attach via attached USB cable

Similar Questions

• Lightroom CC 2015.2.1 D800 import slow with attached USB cable

  Hello

  When I join the MacBook Pro retina the D800 with a cable USB 3 (various) (end of 2012), not all images are displayed in the import dialog, and if all images are marked for import and import is started, nothing happens. When I do not start the import of images and wait a few minutes and reopen the import dialog, all the images are displayed correctly. When you import then all images, also nothing happens and the images are imported after waiting a few minutes. The time-out period is about 5-10 minutes until Lightroom starts to import images from the camera on the disk.

  Import of images of D800 with a USB cable for Mac OS "Fotos" app works normal and without problems (or wait time). Now, my solution is to import images into Mac OS app "Fotos" and then import these files to image imported into Lightroom.

  I hope that the new import dialog will change the old, that was quick, easy and reliable!

  Thanks for help and best regards,

  Matthias

  The latest updates of Lightroom (dating back to the former import dialogue) solved the problem. When attaching the camera to the port USB to import is as fast as it was before. I tested several times, and none of the problems described above appear (images appear instantly in the import dialog and import is then very fast).

  I also always use the SD slot, but sometimes I only have pictures on CF card, so the SD card does not help then. To this end, the problem was really annoying!

• Lightroom does not detect my camera... what should I do?

  Hello everyone so I'll try to attach my d810 with light Room 6... Lightroom does not detect my camera... what should I do?

  Hi delmonl

  What is your operating system?

  Please see Lightroom and El Capitan | Mac OS 10.11 for known issues if you use MAC OS X El captain

  Attach cameras Nikon and Leica using Lightroom CC 2015 and Lightroom 6 is not currently supported on El Capitan.

  Concerning

  ~Assani

• 4.3 Lightroom does not detect attached D800

  I have my computer on my D800 (Yes its on) via the usb cable provided with the camera. I use Lightroom 4.3 which supposedly supports a captive D800, but when I run capture captive, he says "No. Camera detected".

  What happens here? Does anyone else have this problem? Any ideas?

  Thanks, Jeeheon

  Try to take the camera memory cards then.

• motion eye camera / webcam does not work. "" Installation when trying to install the drivers, it says "failed".

  Original title:

  motion eye camera / webcam does not work.

  I have not capture camera utility installed on my laptop and when I download site sony vaio, it says the installation failed.

  model is sony vaio VGN-CR19VN

  Hello

  You encounter an error message and the error code during the installation of the driver?
   
  Uninstall the drivers of webcam completely from the laptop and reinstall in the clean boot state.

  Link to download the drivers:

  http://www.Sony.co.UK/support/en/product/VGN-CR19VN_B/downloads/SOACCU-01363010-UN_3265 

   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7, of the above, provide the KB article.

  I hope this helps!

• SpeedGrade does not open my sequence when I send it via the direct link of Premiere Pro. Problems known/patches?

  I finished my sequence and tries to send to SG-CC15 and the page opens and then nothing.  No display or anything like that

  Here are the lines of the response of the newspaper which concerned me:

  : No detectable display

  Driver: Driver not detectable

  ["GlobalSettings"]  Failed to load user settings, using the default values.

  Any thoughts here?

  Neil R,.

  Thanks for your help!  Finally, I just uninstall the first and Speedgrade and then installed both and that solved the problem!

• Help, please. Not detected HP Desktop F4500 wireless printer same w/a usb cable

  My wireless printer has a mind of its own. When I got it, it printed... wireless. My router freaked out & did not work, so I unplugged my router & used my dsl cable to my laptop to connect. I tried to plug the usb cable from my printer to my laptop so I can use it & it didn't work. I brought my printer at the show & restarted my laptop... it worked w / the USB for a day. I got a new router and now my printer is not working yet. RAWR! Help, please. I don't know what to do. It is not work w / or w/o a cable. I've restarted both, but nothing. Thank you all ;-D

  Unplug the USB cable from the laptop, then remove the icons of printer to the printer from your laptop too. Now click on the Menu start > all programs > HP > HP Deskjet F4500 > add a device. Now follow the instructions to reconfigure the printer to connect to your new network. You must connect the USB cable between the laptop and printer ONLY when you are prompted to do so and not before it.

• The new Lightroom does not detect my camera for shooting captives...

  Can someone help me! I have

  have used Tethered Shooting with the same camera and same machine several times in Lightroom, but after that I started with Lightroom CC, I had problems.

  I've updated to the latest version: lightroom cc 2015.2.1 / 6.2.1 a few days ago.

  I know that Lightroom detects my camera for other means, such as the import function. My mac also detects my camera for these uses in other ways. Shooting of the work on other peoples Lightroom (same version) with my camera, but not on my own captive. I reinstalled Lightroom - it did not work. Anyone?

  Hello

  Please upgrade to the latest version of Lightroom, and the question to tie with El Capitan will be resolved: keeping up-to-date for Lightroom

  Kind regards

  Tanuj

• My iMac does not detect my C309g-m as a scanner via bluetooth or wifi.

  Somewhere between Snow Leopard and 10.7.3, my iMac stopped detecting my C309g-m as a scanner with bluetooth and wifi.  I can still print via bluetooth and wifi without problem, but "print and Scan", "Image Capture", and "Preview" not to recognize the C309 as a scanner.

  I uninstalled the HP Photo Center, but didn't know that there was a 'scrubber' option until after the forums up. Accordingly, I still have the package installed driver somewhere in the interiors of my computer.  It is a 3.3.3 package by car.

  Any help will be greatly appreciated!

  Hello

  As the software was partially removed, please follow the steps below to ensure that pilots are not damaged:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Then, download and install the latest HP Printer Drivers 2.8 below package:

  http://support.Apple.com/downloads/DL907/en_US/HPPrinterDrivers2.8.dmg

  Finally, reset the printing system and reconfigure the printer:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the Plus sign and select the pritner listed as Hello in the default tab.

  Now, check if you can scan using Print & Scan or one of the other methods described below:

  http://support.HP.com/us-en/document/c01910186

  It is not supported to scan from the front panel of the printer without a full feature software, so it's expected.

  About Webscan EWS option, the page overview only scanning, in order to save the page scanned, you should right click (CTRL + left click Mac keyboard), then save the file in the contect menu.

  Please let me know any changes during the scan to Print & Scan after installing the package.

  Kind regards

  Shlomi

• HP Photosmart Plus 209 a - m does not detect my wireless

  I have a HP Photosmart Plus 209 a - m wireless all-in-one printer and I use Windows 7 for my OS. The printer does not detect my wireless. I checked the setings wireless to the printer. Wireless is on and working, but it fails to detect our SSID.

  I used print and Scan doctor but who could not connect to the printer. I tried the printer on my computer but my computer does not detect it. I tried to download the HP software to reinstall the printer, but I received a message stating that the printer was not connected.

  This printer has worked with wireless network in the past. I suspect a recent change in the disposition of our wireless network might have caused the problem, but I don't know how to fix it.

  Any suggestions?

  So I solved the problem by uninstalling the "upgradeprinter" (that's what my computer was recognizing the HP Photosmart Plus 209 as). Icon in the list of printers for the HP Photosmart wouldn't let me not uninstall this printer at that time where (the button uninstall is not usable). I kept the HP software installed and I kept the printer connected to the computer. The computer uninstalled you 'Upgradeprinter' then restarted. When the computer restarts automatically began to reinstall the HP Photosmart Plus printer correctly. I don't know if he has begun to do this because I tried redownloading the installation software, because the HP software installed always, either because the printer is connected to my computer. I decided to ask it was useless as long as it works. The printer is installed properly, but after you run a scan with print and Scan doctor, I found that it was only installed to run on the USB port. I ran the software Wireless USB. Attempts to do this before the reinstall failed because the software failed to detect an HP printer connected to my computer. This time, it worked. My computer can now print to the printer HP Photosmart Plus wireless. Added to * beep *, then I could uninstall the previously installed printer because the Uninstall button, which wouldn't work not before, now worked.

• SRM 5.1 does not detect the existing unit of vSphere 5.1 independent replication

  Installation guide 5.1 SRM said that RS can operate the vSphere replication stand-alone version:

  " If you installed the stand-alone version of vSphere replication 5.1 then installRS 5.1, all existing twinning and replicas are immediately accessible thanks to the SRM user interface"

  http://pubs.VMware.com/SRM-51/index.jsp?topic=%2Fcom.VMware.SRM.install_config.doc%2FGUID-E8859207-0D9D-414e-8A2A-CEAC0FCA76A3.html

  However, MRS. 5.1 does not detect it.  When I go to the page of replication vSphere in SRM, it seems that if no VR device has been deployed, as if she still wants deploy me them to SRM.

  
  

  How do you get SRM 5.1 to detect the existing VR device and all of its repetitions?  Thank you.

  
  

  Hi Mike,.

  SRM 5.1 requires a separate VRMS and VRS. If you deploy VR 5.1 5.1 SRM and do not use an existing independent RV unit, you always deploy a single device (which contains a VRMS and a VRS) which is ready to use without any additional configuration. MRS allows you to deploy one or more additional VRS for load balancing purposes, but it is completely optional.

  So, normally, it shouldn't matter if you have installed VR 5.1 as stand-alone unit or if you have installed since SRM 5.1. For all purposes, that's exactly the same device. Have you tried you are looking for RV in vSphere Web Client rather than in MRS. interface? If vSphere replication does not appear in the Web Client, then it could be that the VR device is is not registered with vCenter Server or RV service does not, which could be due to a network problem.

  If RV is displayed in the Web Client vSphere then VR runs correctly and the problem is indeed with the connection with MRS.

  Thank you

  Stuart

• Does not detect my HARD drive in the BIOS

  Yesterday, I bought DT01ACA300 of HARD drive and it does not detect.
  I've tried it on two motherboards (different ports and different controllers: AMD, Intel chipset JMicron chipset) with different powers and signal cables (which do not work with my player Samsung HDD and DVD SATA Lite-on), but it won't do no good...

  It seems that the only thing that might have caused it may be the power supply, but I can't check it out because I don't have a spare. I tried to disable most of the unnecessary controllers on MB to lower energy consumption, but it did not help.

  From what I've read on the Internet, it seems that it is not I can do by myself and it is very likely defective drive, but I still have some hope that I can make it work...

  It would be a big problem to return to calm: I'll have to send in another city in the authorized service center so that they would check it, and then only, I can get a replacement (if noone will fly it by then, which can happen...).

  Which machine do you have?

• Headphone Sockets does not detect not not my headphones

  I have an Alienware 15 for about 2 months now and I decided to try my audio out jacks. To put in my headphones (which leans on my cell phone), my laptop does not detect the headphones. Tried another type of headphones, but ended up with the same result. Help, please.

  Is taking a plug of headphones or a headset (with microphone) Jack?

  Are you quilting in game?

  Contact-rings are different between the two. Just because your phone accepts both types, do not assume that the laptop is also. There are various after-market converters available (analog and digital/usb).

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

• 6 Lightroom does not recognize my Nikon D700 in trying to use Tethered Shooting.   I have the right cable to attached tools I think. It happens with no camera detected.   Camera is on.

  6 LightRoom does not recognize my Nikon D700 DSLR.   I have connected the PC to my DSLR using Windows 10.   I entered the program 6 of Lightroom and selected "file/Tether Capture / captive Start Capture."  He then says "No Camera detected"

  I think I have the right cable attached. It is a 5 Pin mini-cable USB 2.

  The mini USB camera works, I think.  I uploaded photos from the D700 to my computer before.

  When I connect and disconnect the tie between my laptop and the D700, computer one problems

  sound of Bell saying he acknowledged a connection to the laptop device.

  What could be wrong?

  Thank you!

  Len.

  Hello

  Please upgrade to the latest version of Lightroom, and the question to tie with El Capitan will be resolved: keeping up-to-date for Lightroom

  Kind regards

  Tanuj