Satellite A210 - 171 (PSAFJE) - powers but does not start

Similar Questions

• Satellite A500-148 turns on but does not start

  Hi all, I have a Satellite A500-148 from a friend who asked me to take a peek, it turns on, but does boot when I press the following power button occurs:
  -The power button and the charger are on and the hdd led only flashes once
  -The fan comes on for about 3 seconds
  -No image on the screen, I indicated a light against it, but there is really no image

  Tried to reset by pressing the button for 30 seconds without the changer is plugged.

  I disassembled it and noticed that this laptop has an external video card, so my question is, who's broken the video card or the motherboard.

  Thank you

  To be honest I don't understand this with an external video card. Can you describe how you mean exactly?
  In any case, on this virtual path, it is not easy to offer the exact diagnosis. You can try the little test and remove this external adapter, RAM and HARD disk, and try to start again.

  Ask your friend if he had something that may be responsible for this.

  One last thing: laptop stays in r might have turned off after a certain time?

• PC runs, but does not start. Monitor, keyboard and mouse with no signal.

  PC runs, but does not start. Monitor, keyboard and mouse with no signal. Pretty much. And when you want me to remove the battery of the bios, or whatever, it seems tight and hard to get out because it is surrounded by other elements.

  All fans work, the power/battery or anything that works I think that, since there is a fan on the right where it is and it seems to work. I remember what happens before, I don't know, but before that, there are many gels. This error below was made before all this happened, but I managed to run f8 and then run normally until it freezes again. Then, after that, it runs but does not start. No beeps etc. The best fans will have plenty of vouches and Bravo to wherever you like me to vouch or maybe send the great service that you provide to administrators if that's even possible, haha.

  Thanks in advance.

  "

  The file is possibly corrupted. The file header checksum does not match the checksum calculated. »

  It is a sign of a lack of food.  Looks like you have a desktop computer?

  Power supplies run about $50.  It is a rectangular box at the corner of the system in which the power supply will from the outside.  It's a pretty standard form in most of the PC and with a little investigation thorough replacements can be found.

  It is usually held in place by 4 screws and can be held in place with a spring clip.

  Most essential, is that you need to buy a replacement with the right number of straight plug forms to adapt to your PC.

  This seems more complicated than it really is and takes about 5 to 10 minutes to do the replacement.

  Look at the power output of the power supply failure and buy a new, more powerful.  New desktop PC usually come usually with a diet under size and what are the causes these failures is too strong a request for devices you have connected.  So, buy one with a higher power rating.  Usually about 500 Watts does the trick.

  If you do not feel upwards to this task, a technician should not charge you much like this.

• Put 8g memory in es1-512 but does not start. Had to put 4g in. Does anyone else have this problem?

  Put 8g memory in ES1-512 but does not start. Card say that it will accept up to 8 GB. He went out, re he sat several times without success. Does anyone else have this problem? Thanks in advance.

  Hello

  Here's the original memory stick for Aspire ES1-512:

  KN.8GB07.013

  SODIMM.8GB.DDR3L - 1600.KINGSTON

  OR

  Compatible memory: Kingston

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• MacBook Pro-life extendable start-up chime, but does not start

  I have a start 2011 15 "MBPro8, 2

  Quad Core Intel Core i7

  2.30 GHz

  Boot ROM version: MBP81.88Z.0047.B2A.1506082204

  Intel HD Graphics 3000 VRAM:512 MB

  AMD Radeon HD 6750M VRAM:1 GB

  8 GB of RAM 1333 MHz DIMM0

  It will not start.  Trying to start the machine, it enters a loop-

  1. startup chime

  2. grey screen with Apple

  3. the small wheel starts to turn under the Apple

  4. the screen goes black

  ... and the cycle starts over.

  The computer does not start in Mode safe.  In an attempt to safe mode the loop above has the addition:

  3. a progress bar is displayed but does not progress.

  I have reset the PRAM

  It will start up in target Mode, so I was able to recover data

  In target Mode, I was able to run first aid utility on the drive.  This has not fixed the problem.

  I can hold down the Option key and see Macintosh HD and the recovery Partition.  If I try to boot from the recovery partition, I get the same loop.

  I can start in the Test of online material, which revealed no material problems

  I can boot in Verbose mode and it always happens in the same place

  Execution fsck_hfs (version 226.1.1 of hfs)

  BootCacheControl: cannot open /var/db/BootCache.playlist: 2 no such file or directory

  ' ' It would be possible for me to insert the "var/db/BootCache.playlist" file using target disk mode?

  Other thoughts?

  Have you tried resetting the SMC?

  Reset the management system (SCM) controller on your Mac - Apple Support

• Recovery partition is there but does not start Recovery

  Hello
  
  When you try to restore the image (F11 at startup), the laptop seems to be as he tries to start missing Windows installation (Windows Boot Manager error page).
  
  Partitions 'SYSTEM', 'HP_RECOVERY' and 'HP_TOOLS' have not been affected. Recovery files of ~ 15 GB are still there!
  
  The Windows (2nd primary) partition was deleted and then recreated as an NTFS partition. Since then, the recovery process does not start.

  How can I restore my intact HP_RECOVERY partition system without using recovery DVD? (I can't access right now.)
  
  The partition Windows has need of a specific disk label? What is the magic that breaks the recovery when an NTFS partition is all simply deleted and then re-created?
  
  Peter

  HP ProBook 6550 b (WD701EA #ABD)

  Solution: How to fix F11 penetrates is not in the Recovery Manager process

  You will need:

  -This fix by HP: difficulty to the Multi-partition HP Recovery Manager (the ProBook 6550 b is not listed as a supported model, but it worked for me)

  -installation of Windows (see partial solution above) a job to install the fix on your ProBook

  or

  -sufficient knowledge to extract the winre.wim missing the fix above, copy it to your recovery partition and to apply any measures necessary (I did this)

  Steps to follow:

  -in your work on your ProBook Windows installation open the file downloaded "sp48415.exe".

  -the files will be extracted in "C:\swsetup\SP48415", open this folder in Explorer

  -Right click on "F11SPFix.cmd" and run as administrator

  -the patch will be applied

  Restart und press F11 at startup to enter your recovery Manager (hopefully) fixed.

  Credits to HP support.

• 15-p151nr Pavilion: Pavilion 15-p151nr dead, power supply LED flashes 3 times but does not start

  With or without the adapter is connected to the computer (well known socket), the computer will not turn on.  The LED located on the left side of the computer where the socket is attached blinks 3 times (white), but does not supply power to the top.  Another post I saw said "continuous" flashing would be the power adapter, but wanted to ensure that it is in fact the problem before buying a new...  Any help would be great!

  Hi @joshuaj21,

  Welcome to the HP Forum!

  It's a great place to find answers and advice! You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums: first time here? Learn how to publish and more

  I understand that the computer will not turn on. However, when you connect the AC adapter of the power port light flashes 3 times.  Please check that the power cord is not one of the recall. HP laptop AC Power Cord Safety retirement program and replacement announced August 26, 2014 .  You use a power bar?  Have you tried a different outlet? Here is a link to the HP laptops - tests and using the AC adapter which can also help.

  Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution"down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos. : catvery-happy

• Touchsmarrt Tx2 turns on but does not start.

  The laptop turns on I hear the fan, the caps lock and a lock of numbers blink, but it does not start. I'm runnin windows 7

  Home premium. I did recent changes. Just put computer in mode 'sleep' and he won't wake up. The wireless light is orange.

  Electrical components sometimes must have all the food sources removed and reintroduced to work properly.  Try to perform a hard reset first, if this does not work then we will move on to the next step.

  To perform a hard reset

  • Shut down the computer by going to the menu start and select shut down. (If you have no display, hold the button for 5 seconds); (if the computer don't market, go to the next step)
  • Unplug the adapter from the laptop.
  • Remove the battery from the bottom of the laptop.  There will be a switch/battery eject button.
  • Wait at least 1 minute with all sources of power disconnected.
  • Reinsert the battery and reconnect the power adapter, and then try to turn on the laptop.

• Pavilion 15 - p002nia: HP Pavilion 15 - p002nia fan runs but does not start

  My 2 year old son poured drink chocolate on the keyboard of my laptop 15 - HP Pavilion p002nia recently bought. When I found out, the laptop had stop, all efforts to start failed. White LED light on the button walk / stop would stay and fan would run for 30 seconds, stops, starts and stops continuously. The system does not start. What can I do? The jury is dead?

  Hi TheOldMan, thanks for your response. But, someone suggested I have dismantle the system, clean with alcohol and dry that it might help the dos system.

• Satellite Pro 4220 - update the BIOS does not start

  Hello!

  Please, someone tell me what is the problem with the update to v1.60 SP4220 BIOS? It does not start even do it according to instructions.

  I did the following:
  1 download/have unzipped the package v1.60 since the BIOS page on a non-bootable floppy disk empty
  2. put the floppy in the computer
  3. turn on the device with the F12 key

  With a floppy, I got the "non-system disk" error and another with a "EMBRL" error message missing. What is it, I'm not familiar with that one?

  Best regards

  Pete v.

  Hello

  Can I ask why you want to update the BIOS?
  You have problems?
  If the laptop works well the update of the BIOS is not necessary! My laptop is about 6 years old and I have no day BIOS!

  However, I think that you didn't use the right update procedure.
  Please check this document before starting the BIOS update:
  http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm

• Satellite A210-ST0 - wireless LAN driver does not work

  I recently reformatted my laptop with windows XP, and I have all the drivers working except the wireless Lan driver.
  I got the driver from the toshiba page and this is the XP driver. I install it, but the computer still does not recognize that the map has a pilot (appears as a question mark in the Device Manager) does anyone else have this problem? is there another place to get the driver?

  PS: I'm pretty good with computers, I just need the driver file and can installed with on an EXE file

  Hmm

  What page of the driver Toshiba did you use for the download of the driver?

  As I m not wrong not the * Satellite A210 - ST0 PSAFGC * is a Canadian series and therefore, it would be desirable to use the Canadian page for the download of the driver!

  Check this box:
  http://support.Toshiba.ca/support/download/ln_byModel.asp

  The WLan card chip could come from Realtek or Atheros.

  Last but not least, you should check your BIOS version. If the latest version is available on the Canadian page and then try to update!

  Good luck

• Re: Satellite A210 - 1 4 - ATI CCC does not work on Vista

  Recently, I was unable to open on my laptop Toshiba Satellite A210 - 1 4 ATI Catalyst Control Center. When I click the icon of the CCC on the start menu, the icon opens but when I right click on it and select Catalyst Control Center nothing happens but the icon is still there.

  I had a similar problem a while ago but instead of doing nothing, the splash screen appears, and then Vista displays the message "ATI CCC has stopped working".

  Any ideas?

  Hey,.

  If Catalyst Control Center won t open, it could be something wrong with the display driver I would recommend reinstalling the the official website of Toshiba display driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Simply search your laptop model and download the new version. Before installing, remove the old first and restart your laptop. Then install the downloaded version.

  It works for you?

• Satellite L840: Win 8.1 installed as 1 BONE but does not start correctly

  I have a problem with my new L840 Satellite

  Next steps on installing Windows 8, 1 and in the process, he said on-screen that download to update and restart just stays on the screen with circles of loading windows...

  How can I go to the BIOS? Tried F2, INS F2, F2 - F8 it does not work...

  > It just on windows with the circles of loading screen stays...
  What happens if you put the device by pressing and holding the button walk / stop?
  The laptop boot?

  To access the BIOS, you must press F2 to turn on/off the unit.
  Note: the laptop must be turned off completely in order to access the BIOS. 8.1 Win usually enters the hybrid shutdown mode that is NOT the real stop

  More about CIHI:
  [Perform a complete shutdown in Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]