Limit of the dynamic access policies?

Similar Questions

• What is the dynamic-access-policy-registration ABC_Access?

  Can Hi anyone explain the following? I examine documents Cisco Anyconnect SSL VPN. It does not have these commands. What is the relationship of the Anyconnect VPN with these commands? Or send a link. Thank you

  -----

  dynamic-access-policy-registration ABC_Access

  Description 'access ABC '.

  WebVPN

  the value of the URL - list A_Intranet, ABC_Access

  SVC request to enable default svc

  --------------------

  I checked the document from Cisco, which say:

  Operating instructions

  Use the dynamic-access-policy-record command in configuration mode global to create one or more DAP records. When you use this command, you dynamic-access-policy-record mode, in which you can set attributes for the record named the DAP. The commands that you can use dynamic-access-policy-recording mode are:

  • Action (continue, terminate or quarantine)
  • Description
  • network-acl
  • priority
  • message from the user
  • WebVPN

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

  That is - this to create one or more DAP records for?

  Please see the following guide for a good overview and details on the use and deployment of DAP:

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

• Dynamic access policies - limited ASA 9.4?

  Hello

  Is there a maximum number of DAP supported by ASA 9.4 55XX?

  Cisco recommended a maximum of 100 to 9.1. Is it always true to 9.4?

  Thank you

  Patrick

  Hi Patrick,

  There is no virtual limit for DAP policies, you can create on the SAA depends on more than the material that you are using the ASA rather than the code is running. However, there is a limit to the attributes within each DAP.

  Currently, a maximum of 5000 values/instances can be treated by the attribute in each PAD.
  A syslog is generated when this deadline has passed:
  3 ASA-109035%: exceeded the number maximum (5000) of DAP attribute instances for
  user =

  It may be useful

  -Randy-

• Several entries of the dynamic map (policies of the phase 2) on SAA

  Hi all

  I have a setup where I set up VPN remotely on my ASA. I came to a situation where I wanted to allow the two IPSEC client using cisco VPN client and android phone using L2TP/IPSEC

  What is happening is that I want to use PFS for IPSEC clients, but my android phone does not support this. Then I tried to create two sequences in my dynamic crypto map, but the first sequence is always put in correspondence and therefore ike phase2 fails. If I put the sequence without PFS first, he will be first, and my client IPSEC uses both PFS...

  If I remove the PFS, fine.

  So is there a way either the AoA match to multiples of phase 2 policy, I mean not only several transform set in the same order, but also for pfs in my case.

  My L2TP client using authentication rsa - sig and are dynamically mapped to a tunnel-group, so I thought maybe we can specify map entries different crypto depending on the authentication method, but it seems that the only option that we linked to this is for card crypto inherited, where we can choose the trustpoint for outbound connections.

  So if anyone has an idea, I would be interested, otherwise, I guess I can leave without PFS...

  Unfortunately not with PFS, as part of the overall transformation (for example: ESP-3DES, etc) then you can set several transformation under 1 dynamic map. However, not for PFS that you only have 1 option either turn or off as PFS is optional.

• Question of dynamic access Cisco policy

  I have my cisco ASA pulling active directory. So far I have only deployed vpn without client for intranet access. But iin test I have cisco anyconnect vpn works also from active directory. I would like to give different levels of access to the anyconnect vpn. I've been messing around with dynamic access policies. However, when I create a new policy and map it to the users group in the AD and the access network list, then I click Finish on the dfltaccesspolicy, I can connect is no longer in the clientlessvpn. I gave my DAP policy a priority 2147483647 I read was the highest, but it still does not work. What I am doing wrong?

  Thanks in advance for your help

  Awesome Neal!

  Thanks for sharing about how you solved your problem with others is the idea of this great forum.

  Please mark this message as answered.

  Have a good.

• How to dynamically access the SQLite result set?

  I want to dynamically access the SQLite result set. Since webworks does not support the "PRAGMA table_info (table_name); I save all newly created information tables in a single two-column table called schema. schema has two columns, table_name, and column_name.

  So I created a function to dynamically access the data in the table. I use the item = results.rows.item (i) and that the data access with item.column line.

  column is a variable that will receive the value of a schema representative of column_name. When I alert (column) I get the column_name is correct, but when I used item.column my results are "not defined".

  any advice on how to solve this issue.

  I managed to solve this issue. The solution is the following: the normal way to access the data of the variable item = results.rows.item (i) is item.column (where the column is the name of the column in the database table. To access the data dynamically, I Specifies a var col1 to assign different values in col1. I then access the data in the database using point [col1] hope that makes sense. If you need a further explanation contact me at [email protected]

• ACS 5.2 places of NDG appearing is not in the access policies

  When I add placements under groups of network devices and try again and use them in my access policies that they appear. It just says no: "no data to display. If I try recreate them I get an error "" object that you are trying to create already exists. "." but it is empty. I can run an export and they appear in the CSV file, but they appear not anywhere on the GUI. I deleted the file and re-created with the same result.

  I have searched everywhere for those who have a similar situation but are empty. Any thougts?

  Kind regards

  Andy

  I have memories on the two issues with this:

  If ' there are multiple attributes with the same name as the NDG. For example if you create a user called "Locations" attribute, it can cause problems. Can be resolved by renaming the attribute

  -Can be questions if the word 'system' appears in the name of node NDG

  Not 100% sure for these (disclaimer) but I wanted to mention in the case where he gives some advice

• Pre-population of attribute in the access policies

  Hello

  I have set up users of the IOM to AD based on access policies.

  "In the access policy I have to define the ' name of the Organization" which the usere were created in AD.

  Is it possible to generate the ' generic name organization is based on the attributes of user?

  If so, how?

  Do not put a value in the access policy.  You must generate be it in a Preopopulate plugin on the side of the application, or in your adapter on the process shape to prepopulate.  Through the user key or any other value, make your logic and return the value of key-code of the search for your organization.

  -Kevin

• The sub-groups and access policies

  It seems that when I add a user to a subgroup, the access policies of the parent that user Group does not occur. However, the user is added to the parent company of the Group of users
  Can someone please verify this?
  
  Thank you

  Subgroups does not inherit the access policy of SuperGroup in IOM [ID 815373.1]

  Bug 5985475 :

  Define an event handler after insertion and attach it to Manager data access policies as an object so that when a group is assigned to an access policy, it checks and add its subgroups to the access policy (just the first level as it will recursively the same it keeps adding subgroups). Verify that you have the same event handler attached to the event after removal of the access policy, so that to delete the access of a group policy, all subgroups are also dismissed by the access policy

  Good luck!

• Can't remember how to access my setings bcc, so how to cancel the limit on the number that I can answer in what concerns?:

  Received a message that had been directed to a number of recipients and wanted to respond to all:, but who exceeded my limit on the number of addresses for to: and Thunderbird would not accept.

  I went through a process of establishing a way to have e-mail messages to multiple recipients automatically addressed to bcc

  Maybe it's a supplement that you have installed.

  As part of this process, I put a limit on the number of recipients that would be treated as "to:.".

  Is Thunderbird built-in AFAIK. Check your add-ons and all the settings that you can do.

• Is there a limit to the number of variables that can access a host on the PXI-7831R or PXI-7841R controller.

  What are the limits on the number of variables that can be transferred between the host controller and a PXI-7841R?  For example, I have several software and controls the status items that the host controller uses to communicate with the PXI-7841R.  These elements are not dependent on digital or analog i/o of the FPGA device.  Is there a limit?  Is there a specification of speed for this communication (by the number of input/output?).  Thank you.

  Any control or indicator that you create in your FPGA LV code allocates space on the Xilinx FPGA. As with all coding, FPGA, there is no way to tell a 'limit' on the space. When you add several controls and indicators, your compilation will take more time and do different things to optimize where everything is stored on your FPGA. You can see the compilation report to see how much space you have left.

  Regarding the speed of specs between the card and the host computer, which will just be specification 133.3 MB/s PCI - fresh general speed.

• Dynamic access of political turmoil

  I have a 5510 ASA and I try to implement policies for dynamic access (DAP) for SSL VPN remote access control.

  I have created several policies for specific users/providers and a hard time enforcing it. Specifically, the selection criteria is simply an AD security group and a network ACL filter.

  What's weird, is that when I got the selection according to the Type of attribute AAA criteria: Cisco and used the name of specific user AD, the policy has been applied successfully.

  When you try to use the security groups and LDAP, it's a no go. LDAP enters AAA server groups and also questions and successfully brings up all groups in the announcement during the selection of the criteria according to the criteria of selection of DAP.

  Any thoughts? I'm supposed to have a separate AnyConnect connection profile for each DAP?

  Thank you

  Right. Him debugs also shows that the user has been authenticated using RADIUS, not LDAP.

  Then you need to change your method of authentication for LDAP, or modify your DAP strategies to use Radius attributes instead of LDAP attributes.

  HTH

  Herbert

• "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

  I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

  I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

  I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

  "Method 1:

  To resolve this problem in Internet Explorer, follow these steps:

  a. Quit all programs that are running.

  b. Click Start and then click Run.

  c. type regsvr32 urlmon.dll, and then click OK.

  d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

  ('DllRegisterServer in urlmon.dll' received successful)

  If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

  ·         Shdocvw.dll (failed)

  ·         Actxprxy.dll (failed)

  ·         Oleaut32.dll (failed)

  ·         Mshtml.dll (received no response)

  ·         Browseui.dll (failed)

  ·         Shell32.dll (managed)

  Method (step 2):

  I suggest you to start in safe mode and test the question.

  Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Method (step 3):

  I suggest you perform a SFC Scan and check if it helps.

  The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

  (SFC Scan completed successfully)

  Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

  DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

  http://1drv.Ms/11PQ3dm

  I hope this will help you to find me a solution to my problem.

  First of all lets run a startup repair.

  This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

  After return from the logs generated.

  Startup Repair

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

  In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

  Select the Startup Repair tool.

  Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

  To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

  Select command prompt.

  Type

  type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

  Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

  Look for the lines saying error or failed.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  del %SYSTEMROOT%\Logs\CBS\CBS.log

  Install the update

  Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  SC stop wuauserv

   

  stop bits SC

   

   

  SC stop cryptsvc

  Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

  Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

  Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

   

  SC start cryptsvc

   

  SC start bits

   

  SC start wuauserv

   
  Difficulty of the Service
   
  Download wuauserv_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121
   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
   
  Reset
   
  Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
   
  If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
   

  SC start DCOMLaunch

  SC start RpcSs

  start wuauserv sc config = auto

  SC start wuauserv

  departure from trustedinstaller sc config = request

  SC start trustedinstaller

  SC config COMSysApp start = demand

  SC start COMSysApp

  SC config BITS start = demand

  SC start BITS

  start slsvc sc config = auto

  SC start slsvc

  SC config start = auto EventLog

  SC start EventLog

  
  --

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install the dynamic disk volume and base set

  I have 500 GB of HARD drive.

  How can I convert a 1 and 2 in basic and volume 3 in Dynamics.

  Please tell me something that is free of cost, and I don't want to use a software to do this.

  Hi Lynda,

  I'll be happy to help you with the problem you have with the computer.

  To create a dynamic disk volume, you must convert basic dynamic first of all disks. How to convert the basic dynamic disk?

  1. connect you as an administrator or as a member of the Administrators group.

  2. right click on my computer > manage > storage > disk management.

  3. in the lower pane, right-click the basic disk you want to convert, and then click on convert to dynamic disk. You must right-click the gray area that contains the title of the disk on the left side of the details pane.

  Warning: After you convert a disk from a dynamic disk basic, local access to the dynamic disk is limited to editions of Windows Windows 2000 at the latest. In addition, after you convert a disk from basic to dynamic disk, the dynamic volumes cannot be changed to partitions. You must first delete all dynamic volumes on the disk and then convert the dynamic disk to Basic.

  Thank you.