Question of dynamic access Cisco policy

Similar Questions

• What is the dynamic-access-policy-registration ABC_Access?

  Can Hi anyone explain the following? I examine documents Cisco Anyconnect SSL VPN. It does not have these commands. What is the relationship of the Anyconnect VPN with these commands? Or send a link. Thank you

  -----

  dynamic-access-policy-registration ABC_Access

  Description 'access ABC '.

  WebVPN

  the value of the URL - list A_Intranet, ABC_Access

  SVC request to enable default svc

  --------------------

  I checked the document from Cisco, which say:

  Operating instructions

  Use the dynamic-access-policy-record command in configuration mode global to create one or more DAP records. When you use this command, you dynamic-access-policy-record mode, in which you can set attributes for the record named the DAP. The commands that you can use dynamic-access-policy-recording mode are:

  • Action (continue, terminate or quarantine)
  • Description
  • network-acl
  • priority
  • message from the user
  • WebVPN

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

  That is - this to create one or more DAP records for?

  Please see the following guide for a good overview and details on the use and deployment of DAP:

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

• How to map a dynamic access to a group policy strategy?

  Experts,

  I'm doing an SSL implementation and a part of the requirement is to have the authentication of users in LDAP, are mapped to a particular group policy. They need this mapping for a particular bookmark assigned to them, because they are strictly using the WEBVPN portal. I have several DAP is configured and I want to map the user that is matched for each DAP, to a particular group policy. I read you can use the LDAP attributes on the user account in AD, but I want to map the DAP "mortgage" in Group Policy "mortgage", as opposed to reading additional AD attributes of the user. Is this possible?

  DAP and group policy are two ways to implement access control on the remote access vpn client.

  DAP must take precedence over group strategy.

  When the responses from the LDAP server for authentication request with the LDAP group member attribute, you can map this attribute of joining a DAP folder or a group policy.

  If you want to map the LDAP group member attribute to group policy, you must set the attribute LDAP map. Please see the example below

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00808d1a7c.shtml

  If you want to map the attribute for LDAP group membership in politics of the DAP, you will find the guide in ASDM

  Edit-> Advanced-> Guide dynamic access policy.

  The below is copied from the guide above.

  Example of composition of group

  You can create a basic logical expression for the special criteria of belonging to an AD Group. Because users can belong to several groups, DAP analyzes the response from the LDAP server in separate fields in a table. You need an advanced feature to accomplish the following:

  • Compare the memberOf a string field (in which case the user belongs to a group).

  • Iterate over each field returned memberOf if the data returned is of type "table".

  The function that we have written and tested for this purpose is shown below. In this example, if a user is a member of a group, ending by "-stu" they correspond to the DAP.

  assert(function()
  
         local pattern = "-stu$"
  
         local attribute = aaa.ldap.memberOf
  
         if ((type(attribute) == "string") and
  
             (string.find(attribute, pattern) ~= nil)) then
  
             return true
  
         elseif (type(attribute) == "table") then
  
             local k, v
  
             for k, v in pairs(attribute) do
  
                 if (string.find(v, pattern) ~= nil) then
  
                     return true
  
                 end
  
             end
  
         end
  
         return false
  
      end)()
  
      

• Dynamic access of political turmoil

  I have a 5510 ASA and I try to implement policies for dynamic access (DAP) for SSL VPN remote access control.

  I have created several policies for specific users/providers and a hard time enforcing it. Specifically, the selection criteria is simply an AD security group and a network ACL filter.

  What's weird, is that when I got the selection according to the Type of attribute AAA criteria: Cisco and used the name of specific user AD, the policy has been applied successfully.

  When you try to use the security groups and LDAP, it's a no go. LDAP enters AAA server groups and also questions and successfully brings up all groups in the announcement during the selection of the criteria according to the criteria of selection of DAP.

  Any thoughts? I'm supposed to have a separate AnyConnect connection profile for each DAP?

  Thank you

  Right. Him debugs also shows that the user has been authenticated using RADIUS, not LDAP.

  Then you need to change your method of authentication for LDAP, or modify your DAP strategies to use Radius attributes instead of LDAP attributes.

  HTH

  Herbert

• Power of fire Access Control Policy - error after re-image

  Hello world

  I have recently given in image module power light (6.0.0) on a Cisco ASA 5512-x and I have this error on the section of access control policy:

  access-policy - error.jpg

  

  Whence this reference to politics? I have not deleted something, this is a new installation.

  Any ideas?

  Thank you

  Hello

  The error indicates that it might be a bad installation where there was a problem when restarting,

  You can try to import any other ASDM access control strategy and see if it works.

  If the problem persists, you will need to follow the steps below:

  1) uninstall the SFR
  sw-module module sfr uninstall
  
  2) wr mem
  3) Reload ASA ( in Maintenance window)
  4) load the boot image (6.0.0.1055)
  5) Load the package file
  Check the ASDM again and see if the policy apply works.
  
  Rate if it helps.
  
  Thanks,Ankita

• How to dynamically access the SQLite result set?

  I want to dynamically access the SQLite result set. Since webworks does not support the "PRAGMA table_info (table_name); I save all newly created information tables in a single two-column table called schema. schema has two columns, table_name, and column_name.

  So I created a function to dynamically access the data in the table. I use the item = results.rows.item (i) and that the data access with item.column line.

  column is a variable that will receive the value of a schema representative of column_name. When I alert (column) I get the column_name is correct, but when I used item.column my results are "not defined".

  any advice on how to solve this issue.

  I managed to solve this issue. The solution is the following: the normal way to access the data of the variable item = results.rows.item (i) is item.column (where the column is the name of the column in the database table. To access the data dynamically, I Specifies a var col1 to assign different values in col1. I then access the data in the database using point [col1] hope that makes sense. If you need a further explanation contact me at [email protected]

• TMS of Cisco 'Unable to access Cisco TMS' error

  Hello

  I have another problem with the server of TMS as well! On my Web interface, I get the message "Unable to access Cisco TMS - TMS Incorrect database version" detected! Someone has an idea?

  What TMS version?

  Is it a new installation or you migrate TMS and TMSPE?

  This error is usually visible with the TMS upgrades/migrations when the SQL database is running an earlier version.

  Difficulty, uninstall TMS and then reinstall it.

  During the re - install, you will receive a prompt to upgrade the database.  This should fix the problem.

• Question of dynamic VPN

  Trying to setup VPN Dynamic tunnels site to site our ASA with a static ip address by using the correct method of Cisco. We do it for a few years, but apparently this is not the recommended method. We were advised to use the DefaultL2LGroup method.

  We have the standard model, but I do not see how this will work without the access lists we used previously.

  .

  ---------

  Model

  ---------

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT
  !
  Crypto-map mymap 1 transform-set RIGHT Dynamics
  Crypto-map mymap Dynamics 1 the value reverse-road
  10 IPSec-isakmp crypto map dyn-map mymap Dynamics
  dyn-map interface card crypto outside
  !
  crypto ISAKMP policy 10
  preshared authentication
  the Encryption
  md5 hash
  Group 2
  life 86400
  !
  IPSec-attributes tunnel-group DefaultL2LGroup
  pre-shared-key *.

  .

  ---------

  Previous config to access list

  ---------

  address the Site1 72 of the crypto dynamic-map WAN_cryptomap_59

  WAN_cryptomap_59 list extended access permitted ip object HQ Site1

  Hello

  Please follow below document

  TP: / /www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-gener...

  Concerning

  #Rohan

• Newbie question route-map/access-list

  I am quite new to the thing whole cisco here.  I'm very hesitant to make changes as I am not sure that I take down the entire network of 200%. (We are a very small company)

  We have a router cisco 1811 (yes I know its old)

  We now have a road map and I'm trying to understand it to make it work the way we want.  Basically, we have a few servers and we do not want some servers to use our cable internet connection, we want to use our T1.  Our T1 uses an ASA5505 as a router.  I don't know why, I know its not the best practice but I was just hired and that's all I have to say on this subject.  I am doing as a result.  Web traffic currently out our interface cable, everything, including the speed of transfer on speedtest.net out our T1.  This makes the bad, bad VoIP phone calls. We also have a tunnel punch in Q1 of our other offices as well as our server Exchange2010 using T1.   If our cable goes down, everything for the T1 (by design).  We have a long list of defined access our route map - use corresponding ip.  I want to change the access list to not allow local network IP addresses.  I know that if I put in a whole ip allow it break our network and nothing comes out of the T1 line, and no one can get to our mail server more.  So, I was thinking of adding some statements, but I was wondering if someone could help me with logic, so I know not if I will break the network.  I wouldn't pull the laminated cord and use the console.  (I really need get a USB serial interface).  Now, you understand a little more about my situation now for all numbers, etc.

  Network internal 90.0.0.0/24, 192.168.0.0/24 192.168.30.0/24, 172.20.0.0/16 (we use only 40 addresses, why they chose 16 is beyond me, stupid really)

  PTP VPN: 192.168.116.0/24 comes and goes out our T1.

  1811 router: 90.0.0.254/192.168.30.254/192.168.0.254

  ASA: 90.0.0.50

  !

  follow the accessibility of ALS 40 ip 40

  delay the decline 90 60

  !

  interface Vlan1

  Description * INTERFACE LAN 90.0.0.x network * $FW_INSIDE$

  IP 90.0.0.254 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  IP tcp adjust-mss 1452

  route WEBPBR card intellectual property policy

  !

  interface Vlan10

  Description * INTERFACE LAN NET 192.168.0.x * $FW_INSIDE$

  IP 192.168.0.254 255.255.255.0

  IP nat inside

  IP helper 90.0.0.2

  IP virtual-reassembly

  route WEBPBR card intellectual property policy

  !

  ! Static routes

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 90.0.0.50 track 20

  IP route 0.0.0.0 0.0.0.0 197.164.245.109 200

  IP route 8.8.8.8 255.255.255.255 197.164.245.109 permanent

  IP route 10.250.10.0 255.255.255.0 90.0.0.50 permanent

  IP route 172.20.0.0 255.255.0.0 90.0.0.50 permanent

  IP route 208.67.220.220 255.255.255.255 197.164.245.109 permanent

  WEBTRAFFIC extended IP access list
  deny ip any host 208.67.222.222
  deny ip any 172.20.0.0 0.0.255.255
  refuse the host tcp 90.0.0.2 any eq www
  refuse 90.0.0.14 tcp host any eq www
  refuse 90.0.0.235 tcp host any eq www
  refuse the host ip 192.168.0.40 everything
  deny ip any host 192.168.0.40
  refuse the host ip 192.168.0.41 all
  deny ip any host 192.168.0.41
  deny ip any host 192.168.0.221
  refuse the host ip 192.168.0.221 all
  refuse the host ip 192.168.0.225 all
  refuse 90.0.0.10 tcp host any eq www
  deny ip any host 192.168.0.225
  refuse 90.0.0.11 tcp host any eq www
  refuse 90.0.0.9 tcp host any eq www
  refuse 90.0.0.8 tcp host any eq www
  refuse 90.0.0.7 tcp host any eq www
  refuse 90.0.0.6 tcp host any eq www
  refuse the 90.0.0.1 tcp host any eq www
  refuse 90.0.0.13 tcp host any eq www
  refuse 90.0.0.200 tcp host any eq www
  permit tcp any any eq www
  allow the host ip 192.168.0.131 one
  allow the host ip 192.168.0.130 one
  allow the host ip 192.168.0.132 one
  allow the host ip 192.168.0.133 one
  allow the host ip 192.168.0.134 one
  allow the host ip 192.168.0.135 one
  allow the host ip 192.168.0.136 one
  allow the host ip 192.168.0.137 one
  allow the host ip 192.168.0.138 one
  allow the host ip 192.168.0.139 one
  allow the host ip 192.168.0.140 one
  allow the host ip 192.168.0.141 one
  allow the host ip 192.168.0.142 one
  allow the host ip 192.168.0.143 one
  allow the host ip 192.168.0.144 a
  allow the host ip 192.168.0.145 one
  allow the host ip 192.168.0.146 one
  allow the host ip 192.168.0.147 one
  allow the host ip 192.168.0.148 one
  allow the host ip 192.168.0.149 one
  allow the host ip 192.168.0.150 one
  allow the host ip 90.0.0.80 one
  allow the host ip 90.0.0.81 one
  allow the host ip 90.0.0.82 one
  allow the host ip 90.0.0.83 one
  allow the host ip 90.0.0.84 one
  allow the host ip 90.0.0.85 one
  allow the host ip 90.0.0.86 one
  allow the host ip 90.0.0.87 one
  allow the host ip 90.0.0.88 one
  allow the host ip 90.0.0.89 one
  allow the host ip 90.0.0.90 one
  allow the host ip 90.0.0.91 one
  allow the host ip 90.0.0.92 one
  allow the host ip 90.0.0.93 one
  allow the host ip 90.0.0.94 one
  allow the host ip 90.0.0.95 one
  refuse the host tcp 90.0.0.3 any eq www

  ALS IP 40

  208.67.220.220 ICMP echo source interface Vlan1

  Timeout 6000

  frequency 20

  ALS annex IP 40 life never start-time now

  allowed WEBPBR 2 route map

  corresponds to the IP WEBTRAFFIC

  set ip next-hop to check the availability of the 197.164.245.109 1 track 40

  That is how we have it set up right now.  If I put in a few lines above WEBTRAFFIC with:

  deny ip any 192.168.0.0 0.0.0.255

  deny ip any 90.0.0.0 0.0.0.255

  deny ip any 192.168.116.0 0.0.0.255

  !  Etc with all internal networks

  * And then put at the bottom:

  allow an ip

  who will ALL break so we can not communicate with anything?  Or is that what I did to do this, we get internal routing etc.?  Also, I guess I'd put in 15 IP addresses that are coming in the SAA as well?  (We have public IPS 14 (one for the T1 gateway) that would go as well?)  I don't want to try to put in those at the top and make sure no one can do anything.  I hope I made clear what I'm doing...

  Post edited by: Ryan Young

  I have not read this thread well enough to be able to talk to the intricacies of the issue whether this access will make what you want. But I can answer the specific question you are asking. Yes - the access list is top-down, transformed and if a few more top line in the access list matches, then treatment for this package will not get the license at the bottom of the access list.

  HTH

  Rick

• Question of ISE CWA Cisco

  Nice day

  I have 1.2 ISE Cisco with Cisco 2960 n.

  I set up the authorization of the employee successfully, but my problem is with the users of comments that the link is not redirected.

  Please let know us what I put in the default authentication policy rule? deny access?

  And on the switch, I should put the prompt to connect to specific ports or I have to configure the VLAN specific authorization profile?

  Appreciate your support,

  In your authorization policy, you give your guest Wired the same result as Wired-Webauth.

  First time through you don't know he is invited so that it hits Wired-Webauth and gets redirected. Second time you need him in comments feed, so that you know that he is a guest authenticated, it hits Wired-Guest, but you send the same permissions 'Web_Auth '. Create a profile that you want to offer your guests authenticated - Guest_Allowed for example.

• Various Questions about wireless access controller

  Help me please with these fundamental questions about the role of the access (AC) wireless controller.

  Assume that the access controller and Access Point are connected via IP:

  -Wireless frames sent to AP to acre; include the original MAC header (on the way to wireless access)?  If Yes, is there a Cisco AC gets to fill the WLAN and LAN it is plugged (which means that it outputs as ethernet frames as if they were issued by Mobile Stations).

  -Is the AC necessarily the default gateway for mobile stations? I guess not. But it is possible the default gateway?

  The Cisco AC can function as a DHCP relay?

  The AP creates a tunnel to the controller. All IP traffic from the AP to the controller will address the AP source and dest IP to the interface of the Manager of the AP on the controller. The wireless client traffic is encapsulated inside this tunnel. When it hits the controller the CAPWAP is removed leaving the customer's original package to be sent to the local network through the controller.

  The controller should not be the default gateway for wireless clients because it is not a router. Think of it as a device that converted into wired wireless traffic.

  Normally, the controller acts as a proxy DHCP. Once the customer has joined a WLAN, the controller sends the DHCP packets to the DHCP server on behalf of clients such as the IP address of assistance normally configured on the router for cable customers. You can also configure the controller to act as a DHCP server for wireless clients.

• Question of the router Cisco RV series

  Hello

  I have a question. We sell a lot of cisco 800 routers. Now for some clients, we have that they are expensive.

  Then we thought about the RV series, but I can't find any good routing performance for these routers specifications.

  If I go to:

  http://www.Cisco.com/Web/partners/downloads/765/tools/quickreference/routerperformance.PDF

  I see a lot of details of the cisco product, but the RV series isn't here.

  Can someone tell me what are the specifications of performance of these routers? (packets per second, Mbit/s data rate)

  Thanks in advance,

  Tom

  You can also access the data at smallnetbuilder. There are many different performance tests

  http://www.SmallNetBuilder.com/lanwan/router-charts/view

• Several points of access Cisco Aironet 1131AG and same SSID?

  We have several Cisco Aironet 1131AG, all wired devices on a switch (2560) Cisco L2 which is connected to the L3 switch (3550). We have assigned a VLAN for access point to the L3 switch which acts as a vtp Server (L2 switch is vtp client). All the ap will have a static ip address and all will have the same SSID and no security, and they will use several channels (e.g. 1,6,11).  They will work in 3 floors for a roaming wireless client. We not using any wireless controller.

  So my question is this: how to configure the same APs-all with a different ip address, can we use L3 switch to create the dhcp server to access points VLAN (pool for guests) and the rest of the static ip address for the ap? One of the ap can be WDS and on the same radius server local time with users without Cisco Secure ACS or similar controller or I did not understand this very well :-). I followed the guide http://www.cisco.com/en/US/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32roamg.html for WDS where Abu Cisco ACS part is a problem, so I can use the same ap as a Local authenticator as a guide http://www.cisco.com/en/US/docs/wireless/access_point/12.3_4_JA/configuration/guide/s34local.html#wp1035723.

  Thank you very much...

  Well, just so you know, WDS, and local RADIUS authentication is necessary only if you use authentication on your wireless connection.  You say that you do not plan to use security, so it's not necessary.  However, I highly recommend at least using a simple WPA2-PSK to lock your connection, otherwise you might end up giving free Internet access at best and at worst you could give access to the computers and corporate servers.  If you want to reuse a 802. 1 x or WPA authentication method, then Yes, you can use an AP as RADIUS and to improve WDS Server authenticated to roaming, but this is much more limited than the use of a Cisco ACS.

  As for your other questions, Yes, your APs can all be configured the same except for at least three settings: IP address, hostname, and channel.  Configure your static IP addresses on the interface of the PA BVI1.  Do not place it on the Radio or Ethernet interfaces, because if one of these interfaces goes down, you lose the ability to configure the AP, so it's best to use the BVI1 interface.

  And Yes, configure a DHCP scope for your customers on your L3 switch is good design, or you can also use your DHCP server on a different subnet by using the command of support-ip address on the interface of L3.  I hope this helps!  Let me know if you need help to set all this up.

  Merry Christmas!

  Jeff

• Debugging in Oracle Access Manager policy

  So, I've got OAM 11 GR 2 installed and I have configured an authorization policy that doesn't seem to work.  I'm trying to understand how to enable debugging for the policy logs so that when I try to access the resource, I can troubleshoot using logs.

  So far, I have done this:

  CD $MW_HOME/Oracle_IDM1/common/bin

  ./WLST.sh

  Connect ("weblogic', ' password ',' t3: / / localhost:7001'");

  listLoggers(pattern='oracle.oam.*',target='oam_server1');

  setLogLevel(logger='oracle.oam',level='TRACE:32',persist='0',target='oam_server1');

  I know that the log is enabled because of the following:

  ------------------------------------------+-----------------

  Logger                                    | Level

  ------------------------------------------+-----------------

  Oracle.OAM | TRACK: 32

  Oracle.OAM.admin.Foundation.Configuration | < inherited >

  I restarted the oam_sever1 of my Weblogic console.  I'm settling the journal of oam_server1.out, but when I try to access the protected resource, nothing appears in the journal of oam_server1.out.  Issues related to the:

  Have I set up the connection properly?

  I'm looking at the correct journal?

  How to debug policy?

  Thank you

  --

  Mohammed

  Found!

  oam_server1 - diagnostic.log will display all debug information.

  So, to answer my own questions:

  Have I set up the connection properly?

  Yes, and to turn off logging, run the following command:

  listLoggers(pattern='oracle.oam.*',target='oam_server1');

  You can verify that the logging level is back to normal with this command:

  listLoggers(pattern='oracle.oam.*',target='oam_server1');

  ------------------------------------------+-----------------

  Logger                                    | Level

  ------------------------------------------+-----------------

  Oracle.OAM | NOTIFICATION: 1

  Oracle.OAM.admin.Foundation.Configuration |

  Oracle.OAM.admin.service.config |

  I'm looking at the correct journal?

  Yes, oam_server1 - diagnostic.log display of debugging information

  How to debug policy?

  Set the debug level to an appropriate value, the newspaper of the tail and perform an action such access a web resource.  The newspaper will then display debug information that should allow you to see how OAM is implement your strategy.

  --

  Mohammed

• The question of the Access Point wireless router

  I am considered to be an amateur when there are routers so patient with me. I have a wireless router in my office and two workstations are hardlined (ethernet cable-joint) to the router. Then, in the living room, I have 3 devices (Xbox, BlueRay, directTV) I want on the network. Rather than running three office ethernet cables, I expect to have some sort of (reverse hotspot) where a device could hop on the wireless router and the signal I inflexible at these three devices. Not sure if this would require an Access Point or another wireless router?

  Any thoughts would be appreciated.

  -J

  I suggest that you try to find something on WET54GS5... is a bridge with 5 ports wireless if I'm not mistaken... but since it's under Cisco Small Business, I suggest you could ask more about it here

  Cisco Small Business support community

  Or you can see WET54G and buy a separate so you switch can accommodate other devices