Limited scope object is not

Hi team,

In Exchange for extensive monitoring object watch unlisted 'No Avilable case' message.

The reference guide to the listed rule

http://eDOCS.quest.com/Foglight/565/doc/cartridge/ExchangeCartridge/CartridgeForExchangeGuide_Rules.062.5.php

It was there in previous version too

http://eDOCS.quest.com/Foglight/564/doc/cartridge/ExchangeCartridge/CartridgeForExchangeGuide_Rules.56.5.php

I wonder if she was abducted.

You can rebuild the rule of the reference Guide (there being extended and by the State).

I guess my question here is - what trigerred your question looking for this topology object?  What rule you were watching?

Golan

Tags: Dell Tech

Similar Questions

  • When I connect to the Internet, I get a message error "object does not support this property or method". Unable to do anything from there.

    original title: error messages
    As soon as I get on Explorer and on internet I get an error message "object does not support this property or method' am unable to navigate due to this message to appear on each movement.  Someone help?  Thank you

    Hello

    (1) do you have made no changes before this problem?
    (2) is this problem limited only with a particular website or any websites?

    (3) when exactly, you receive an error message when you use Internet Explorer or when the Internet connection?
     
     
    Method 1: If you receive script errors, you can read the following article and check if that helps.
     How to fix script errors in Internet Explorer on Windows computers?
    http://support.Microsoft.com/kb/308260

    Method 2: You can also read the following article and check if it helps.

    Can't access some Web sites in Internet Explorer
    http://support.Microsoft.com/kb/967897

    Warning: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet files, cookies.

    Method 3: Networking in Mode safe
    Follow the link below and check if the problem persists in safe mode with network.
    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Hope this information helps.

  • Message = "Object reference not set to an instance of an object."

    I was running my site Visual studio in mode on the local computer and everything worked very well. I added something to your cart, then it looked as if we'd send her to the last step before you check out through paypal and I closed it. That must have caused a problem because after that, when I tried to open another page, I get this message:

    System.NullReferenceException was unhandled by user code
    Message = "Object reference not set to an instance of an object."
    Source = "App_Web_iy6hza-b".
    StackTrace:
           at ASP.controls_shoppingcartbox_ascx.__DataBind__control4 (Object sender, EventArgs e) in c:\A_Taurus\Controls\ShoppingCartBox.ascx:line 14
    to System.Web.UI.Control.OnDataBinding (ByVal e As EventArgs)
    to System.Web.UI.Control.DataBind (Boolean raiseOnDataBinding having)
    to System.Web.UI.Control.DataBind)
    at System.Web.UI.Control.DataBindChildren)
    InnerException:

    And when I've debugged, it stopped in the code of the controls/ShoppingCartBox.ascx and gives to this line in yellow:

       
      
         
            
            
             < %="" #="" eval("title")="" %="">- < %="" #="" (this.page="" comme="" basepage).formatprice(eval("unitprice"))="" %=""> (< %="" #="" eval("quantity")="" %="">)
            

         
          
      

    And debugging box States: NullReferenceException was unhandled by user code.

    Object reference is not set to an instance of the object.

    It gives then a few suggestions like the use of 'new' somewhere but I don't know where I would put that or if it would help.

    Help please!

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • ORA-21700: object does not exist or is marked for deletion - nested table

    Hi, please see my procedure. It comes to delete records in a table whose primary keys will be given in comma separated format.

    but he triggers the following error

    ORA-21700: object does not exist or is marked for deletion
    ORA-06512: at the 'scott '. PKG_COUNTRY', line 4598
    ORA-06512: at line 10
    Pr_Del_Regional_DtlORA-21700: object does not exist or is marked for deletion
    Process is complete.
    Disconnection from the database tfo_user-watson.


    / * In format on 12/05/2011 14:47 (trainer more v4.8.7) * /.



    Varchar_table. ARRAY TYPE IS VARCHAR2 (5); -in the scope of package


    PROCEDURE Pr_Del_Regional_Dtl)
    pi_v_country_id IN VARCHAR2, seperateed comma for deletion
    po_results ON sys_refcursor
    )
    IS
    l_varchar_table varchar_table: = varchar_table ();
    BEGIN
    pr_split_varchar_values (pi_v_country_id, l_varchar_table); -divides: separation by a comma to the nested table.

    DELETE FROM regional_setup
    WHERE country_id IN (SELECT *)
    TABLE (l_varchar_table)); -removed
    EXCEPTION
    WHILE OTHERS
    THEN
    DBMS_OUTPUT. Put_line ("Pr_Del_Regional_Dtl" |) SQLERRM);
    LIFT;
    END Pr_Del_Regional_Dtl;

    split-
    PROCEDURE pr_split_varchar_values)
    pi_v_values IN VARCHAR2,
    op_varchar_table ON varchar_table
    )
    IS
    l_v_value VARCHAR2 (3000);
    l_value VARCHAR2 (10);
    I PLS_INTEGER: = 0;
    BEGIN
    op_varchar_table: = varchar_table ();
    l_v_value: = pi_v_values;

    IN all, LENGTH (l_v_value) > 0
    LOOP
    i: = i + 1;

    IF INSTR (l_v_value, ",") > 0
    THEN
    op_varchar_table. EXTEND;
    op_varchar_table (i): =.
    LTRIM (RTRIM (SUBSTR (l_v_value, 0, INSTR (l_v_value, ",") - 1)));
    ON THE OTHER
    op_varchar_table. EXTEND;
    op_varchar_table (i): = LTRIM (RTRIM (l_v_value));
    l_v_value: = ";
    END IF;

    l_v_value: =.
    SUBSTR (l_v_value, INSTR (l_v_value, ",") + 1,
    LENGTH (l_v_value));
    END LOOP;
    END pr_split_varchar_values;

    Thanks in advance
    TYPE varchar_table IS TABLE OF VARCHAR2(5); -- in package scope
    

    Have you declared in package or database? Remember, local collection cannot be used in the SQL statement.

  • [CS4 |] JS] move anchored object does not change its geometricBounds

    Hello scripters.

    in my Indesign document I anchored objects like sidenotes, sometimes they are overlapping.

    To do this, I'm trying to move until they overlap, I used the following script:

    myInlineRectangles [k] .move (undefined, [0, -2]);

    I put this line in a while loop to move the object (until he do not overlap).

    It works, it moves the object (although I read that it is not possible). The only problem is that the geometricBounds remain the same.

    As I am comparing the geometricBounds in my "all-State" it ends in an infinite loop.

    Why the object does not change its geometricBounds after moving?

    How to avoid this?

    Thank you very much in advance for any response.

    Franzi_ska

    Hi franzi_ska,

    You will need the story containing the anchored object to recompose to get the new geometric limits (after each trip and assuming the anchored object can, indeed, move).

    Thank you

    OLE

  • Save for precedent: the "Attachment" object does not exist in the previous version

    I'm trying to save a very simple VI from LabVIEW 2013 SP1 to LabVIEW 2009 but I get this strange error.  The VI contains only basic ex that are available in all versions of LabVIEW (shift logical AND Select,<=, u8). ="" when="" i="" try="" to="" save="" it="" for="" labview="" 2009,="" it="" gives="" me="" the="" following="">

    Missing object.  The "Attachment" object does not exist in the previous version.

    I thought first of all it had to do with being possessed by a lvclass, but even after that I removed the class (and unplugged from the lvclass) it always gives me this warning.

    When I try to open it with 2009, it will fail to load the schema-block (error 6).

    The next thing I tried was to copy the block diagram for a new VI and re - create the connector pane, but that doesn't change anything.

    Any ideas?

    Maybe "attachment" made reference to an attached comment (the arrow of a free label for an object on the diagram). I don't expect the presence of attached comments to cause a SFPed VI to not open, but it's the only thing I can think of. Try to remove any comment attached to your diagram and SFPing and see if that solved the problem.

  • Object reference not set to an instance of an object

    After the opening of the "Microsoft SQL Server Management Studio" for SQL 2012 and tries to connect to the server, I get this: reference object not set to an instance of an object. (Microsoft.VisualStudio.Platform.WindowManagement)

    Can someone HELP me please? I'm VERY NEW to this...

    Thank you for your time!

    Install a service pack sql or sql to reinstall or repair. Something must have erased part of the installation, it has not installed right or he needs a SP for SQL.

    http://social.msdn.Microsoft.com/forums/SQLServer/en-us/b04f3626-87f8-475D-8277-276efb6b4cac/object-reference-not-set-to-an-instance-of-an-object?Forum=sqltools

    It is a forum for windows users. I post a question on this forum, it will be more useful, because they treat of this

    Good luck

  • I get "error number 0 x 80040706 Description: object reference not set" while trying to install Empire Earth 2

    Original title: error number 0 x 80040706 Description: object reference not set

    I can't install Empire Earth 2 on my PC because of this error. It is not the disc and I have no drivers up to date. I've tried every suggestion I could find but nothing works. Help!

    Its OK, I found the problem. I recently downloaded EMET 2.0 so I checked it and replace the recommended settings and it worked. I don't know why he did just made even though I thought EMET should only apply to internet explore?

  • creating a restore point gives error 0 x 80042308: the specified object could not be found

    What is the specified object cannot be found - 0 x 80042308? trying to create a restore point in the protection system?

    a snapshot could not be created, please check "vss" and "spp" applications for more information event logs!

    Details: the specified object is not found! backup and restore system keeps giving me these messages!

    HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!

    Thank you!

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    Method 3:
    Try the running System File Checker and see if it helps:
    http://support.Microsoft.com/kb/310747

    It will be useful.

  • Fatal error. Object was not found.

    Hello

    I built aninstaller package that includes:

    3 x .exe

    LabVIEW2009 Dev Environment

    VISA Runtime Environment

    NOR-DAQmx

    When I try to run the Setup program (from the local hard disk) I get the following error, any ideas anyone?

    At soon inadvance, Alec

    .\Distribution.cpp(320): IInstallerError 10002
    Fatal error. Object was not found.
    class CPart object lookup by ProductCode cannot find the object {9A832E3A-8676-41CC-A945-9C6827D00B4C}

    I was building the installer directly on a network drive. If you create the installer on site and then copy it to a network drive, it works fine.

  • Outlook 2002/Windows error message 7: can't open this item. The object is not valid.

    I recently bought a new computer (eMachine ET1831-05) with Windows 7 installed at the factory.  I installed Outlook 2002.  My old computer died & I have been unable to export my calendar, contacts, etc., so I'll have to enter everything manually in my new.

    When I save a calendar appointment is periodic (for example a birthday) I'm unable to open the appointment.  When I try, I get a message - cannot open this item.  The object is not valid. If I set an appointment that recurs not , everything works fine.

    Any suggestions?

    Thanks in advance!

    Windows Update has nothing to do with your questions.

    Please post here instead: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/threads

    THX

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

    What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

    Hello

    1 how long have you been faced with this problem?

    2 have you made changes on the computer before this problem?

    3. when exactly you get this error message?

    The following threads may be useful:

    http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-from-webpage-not-implemented/d09fa331-92c6-4CD3-bc89-9a2c03e304fe

    http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn

  • Lsass.exe system error object name not found, unable to start Windows in any mode.

    I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

    The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

    I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

    -----------------

    What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

    I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

    Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

    At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

    Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

    http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
    http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

    1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

    2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

    You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

    * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

    http://www.Knoppix.NET
    http://www.nu2.nu/pebuilder/ - Bart PE Builder

    See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
    And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

    MS - MVP - Elephant Boy computers - don't panic!

  • How to get rid of "Web Page Message" indicating the object does not support this property or method.

    After I log on my computer, I get the following pop up message "Message on the Web Page" - "object does not support this property or method." He continues to pop everytime I try to do something

    Hello

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same problem occurs:
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/929135

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    It will be useful.

  • object reference not set

    I have a .net web service.

    I checked via the web service that it works correctly.

    Here is the SOAP 1.2

    POST /WebServices/MarketingWebServices.asmx HTTP/1.1
    Host: sdasapprdsvr
    Content-Type: application/soap+xml; charset=utf-8
    Content-Length: length
    
    
    http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">
      
        
          string
          string
          int
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
          string
        
      
    
    

    I get error "the server could not process the request. --> The object reference not set to an instance of an object"

    My code base to set up the soap request

    m_soap.setAction(hostServer + "/" + serverAction);
    m_soap.setHost(QUrl(hostServer).host());
    QtSoapMessage request;
    request.setMethod(QtSoapQName(serverAction, hostServer));
    
    request.addMethodArgument(new QtSoapSimpleType(QtSoapQName("AssociateEmail"),QString("[email protected]")));
    request.addMethodArgument(new QtSoapSimpleType(QtSoapQName("ShowName"),QString("print2013")));
    ....
    
    m_soap.submitRequest(request, endPointURI);
    

    I tried to addMethodArgument without the Type of SOAP

    That is to say.  request.addMethodArgument ("myParameter", "", "myValue");

    I tried to use a struct as shown in another post.

    QtSoapStruct* inputValues = new QtSoapStruct(QtSoapQName("Items"));
    request.addMethodArgument(inputValues);
    QtSoapStruct* item = new QtSoapStruct(QtSoapQName("Item"));
    item->insert(new QtSoapSimpleType(QtSoapQName("Name"), "_OS"));
    item->insert(new QtSoapSimpleType(QtSoapQName("Value"), "BB10"));
    inputValues->insert(item);
    

    It seems as if the arguments are not be attached to the request.

    I was getting an error that it lacked the required fields for the stored procedure.  So I adjusted the .net web service to set default values if the values sent via the web service were empty.  This moved me to the common mistake.

    So, apparently, it was matter of double.

    The first problem was in the client code:

    First of all, I needed to make sure that the parameters passed were in the correct order.

    Second, I found that the addMethodArgument was the right way

    request.addMethodArgument( new QtSoapSimpleType(QtSoapQName("AssociateEmail"), query.value(0).toString()));
    

    The second problem was with .net code.  I needed to make sure that the passed value is not zero.

    if (AssociateEmail == null || AssociateEmail == String.Empty || AssociateEmail.Trim().Length == 0)
                     { cmd.Parameters.Add(new SqlParameter("@IN_AssociateEmail", "No Associate Email")); }
                     else { cmd.Parameters.Add(new SqlParameter("@IN_AssociateEmail", AssociateEmail)); }
    

    And I had to make sure I have done this for each parameter.  Apparently, I sent a couple of empty values, and this caused the shot to the top.

    However, the return value is not always in the best format, but that's another thread.

Maybe you are looking for

  • Touchpad is frozen or not work - Satellite M40X

    Hello everyone, I have a problem with my touchpad. He is either gel or does not work, sometimes it works, but all of a sudden freezes. What really made me crazy that it is new. I read many solutions here and there. Then, I did not win a thing, but an

  • Windows updates generate unwanted Office 2007 update queries

    When I bought my new Acer laptop, it came with a trial version of Office 2007 is installed. I deleted it and installed my suite Office 2003. However Windows update requires updates to Office 2007. I know I can hide them, but do I need? If this is not

  • Inspiron 17r - 5720 problems audio - static, hum, during playback of any audio and the sound of the speaker rear

    Hi, I got my laptop for less than a week and there are several problems with the audio. When no matter what audio is supposed to play, only a static noise comes from loudspeakers. This happens when the music plays, or when a sound system is supposed

  • CUCM 8.6 and Codec Design

    I CUCM 8.6 KT and 5 branches, I'd use G711 inside the HQ (Lan) and G729 between Headquarters and branches. Any help will be appreciated

  • Camara

    Hola no me works the camara he Baptiste programas camaras para windows 7 y nor con eso I can achieve hacerla funcionar me could help gracias!