Line-by-line file processing using the file adapter

Similar Questions

• When I change the thickness (in points) of text/lines/etc by using the arrow icons the thickness of the line jumps instantly to 1000 pts. Why?

  ILLUSTRATOR - when I change the thickness (outline/stroke) (in points) of text/lines/etc by using the icons of arrow (upwards or downwards), the thickness of the line jumps instantly to 1000 pts. How can I adjust the settings to make this feature work, because I really need in many situations. Thanks in advance!

  

  

  koenk,

  The current pastor of the corrupt file bug/preferences units seems to be:

  (1) delete your preferences HERE (close HAVE and press Ctrl + Alt + Shift / Cmd + Option + shift during startup).

  (2) ensure that the parameters English (United States) system locale and the decimal point is. (dot/full stop, no, (comma) when the machine is restarted,)

  (3) launch HAVE again and see if the subject is cured.

  You can see a long discussion here:

  https://forums.Adobe.com/thread/1871389?q=units%20bug

• Now shift isn't snapping line when you use the line Segment tool

  I could be wrong and it has always been like that, but when I take a shift to rotate a line created by using the line Segment tool turns is more degrees as I thought that it used to. I checked and it works always with the Rectangle tool, but not when I traced a line. Guides and snap to Point are both on.

  Is much more annoying when I'm dragging an end point and it will remain at an ideal level of 90 or 45 angle... but nevertheless it remains valid this angle when I paint, just do not change.

  Matt,

  You are not alone.

  See this thread with a link to the other thread:

  https://forums.Adobe.com/message/8274663#8274663

• How to use FTPS using the FTP adapter

  I am trying to create a BPEL process using SOA 11 g 11.1.1.4, that will put the file on the remote site using the ftp adapter. I created JNDI correctly and using portfolio.
  useFtps = True
  walletLocation = correct path of portfolio created in Oracle HTTP Server (OHS)
  walletPassword = walletPassword
  Host = ipaddress
  username = myUsername
  Password = myPassword
  
  For all this, I followed http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#BABEBGGD
  
  Now, whenever I try to test this BPEL process it gives me the error:
  
  "Exception occurred during invocation of the JCA binding:" JCA binding run reference operations 'Put' failure due to: error in establishing session SSL. " Error in the SSL session establishment. Impossible to establish the SSL session to the control channel. Response string: 530 please login with USER and pass response Code: 530) Please correct the SSL configuration. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution.
  
  Any suggestion or resolutions are welcome.
  
  Thank you!!
  
  Concerning
  Yogesh

  Hello

  When you configure the connection for the FTP adapter factory in Admin Console, provide the following values for attributes such as the host name, user name, password, port and the path of remote as location when
  you want to save the file to remote server, for example, ftpAbsolutePathBegin. Please fill out this
  attribute with the path like/soa/ftp/file (example path). If you write to a remote FTP server you must create a factory for connections for this as shown above.

  Please try this and let me know...

  Thank you
  N

• Error during the deployment of a process with the FTP adapter

  Hi all
  
  I use JDev 10.1.3.3 and SOA 10.1.3.3
  
  I use the FTP adapter to get a file from a remote site in a vacuum process.
  I checked the option to delete logical files and using directory.
  
  While deployed, I get the error below.
  
  There was a problem connecting to the server "XXXX" using the 'XXXX' port: bpel_APACSHPREQ940PassThroughBPELOB_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
  Could not initialize the agent of activation.
  An error occurred during initialization of a process enabling agent 'APACSHPREQ940PassThroughBPELOB', version "1.0".
  Please ensure that the agents of activation are configured correctly in the bpel (bpel.xml) deployment descriptor.
  oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
  
  
  Please help me...
  
  Concerning
  MORICE

  Hi Pavan,

  Could not initialize activation agent error means that your connection to the FTP server is not valid Please check connection once in addition, if you use SFTP port must be 22 not 21

  Krishna

• Error, while trying to deploy an application using the DB adapter

  Hello
  
  I am getting error while deploying the SOA application using the DB adapter below
  
  [11:46] send (archive) - sca_DataBAdapter_rev2.jar
  [11: 46:12] Server, the response code = 500 HTTP response was received
  [11: 46:12] error in deployment of archives sca_DataBAdapter_rev2.jar to partition 'default' server soa_server1 [http://computer:8001]
  [11: 46:12] HTTP error Code returned [500]
  [11: 46:12] Error Message from the server:
  * There is a deployment of the composite on soa_server1 error: [JCABinding] [DataBAdapter.DBAdapter/2] Unable to complete unloading due to: cannot find Java class oracle.tip.adapter.db.DBWriteInteractionSpec: could not find oracle.tip.adapter.db.DBWriteInteractionSpec. * of Java class
  
  [11: 46:12] check the log of the server for more details.
  [11: 46:12] error in deployment of archives sca_DataBAdapter_rev2.jar to partition 'default' server soa_server1 [http://computer:8001]
  [11: 46:12] # incomplete deployment. ####
  [11: 46:12] error deployment archive file:/C:/JDeveloper/mywork/DataBAdapter/DataBAdapter/deploy/sca_DataBAdapter_rev2.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  Pls know me if someone has already faced the same thing!
  
  Published by: 934914 on June 19, 2012 05:45

  Have you tried restaring the server and deploy again.
  Before deploying again, make sure that your application of DBAdapter, database is running.

  Thank you
  Vijay

  Published by: veejai24 on June 18, 2012 07:44

• Impossible to retrieve the return value of function from pl/sql using the DB adapter

  Dear Experts,
  
  I use the DB adapter in my BPEL process. Using the DB adapter I invoke a PL / SQL function. I am able to send two input parameters for the pl/sql function. But I do not know how to retrieve the return value of the function. Please suggest me.
  
  Thank you
  Rajesh

  Can you tell how pl/sql function looks like you? you return the value of the function, right?

• Using the AC adapter / CC

  Just got my Sansa Connect and was about to load for the first time using the AC adapter. I confess that I am not the most technologically advanced person, but I don't know how to plug into outlet and obviously something is missing here - the "claws" are not long enough to fit any wall outlet. They are not really forks, just 2 things small metal buckle. There is a button that says 'push' and it seems that something is part of the adapter on the things of the small loop. I'm missing a part or something? I prefer to use the AC adapter instead of charging through the computer.

  Yes, I just checked my white backup box Connect No.-Wi-fi, which is still in its box.  The a/c adapter comes in two parts: the block you describe with a U Groove on it and a little double pins plug-on-a-plate.  The blades of thin plate in the U groove, so the two pins emerge normally, to make a normal a/c adapter - looking...  I guess that's for different areas, so they can ship the correct pins for the region.

  You still have your original packing to check the pins?  They should be here.  If you got a no.-Wi-fi connection in a white box, this little thing to two pins has its own molded into the packaging.

• Error "Invalid line" when you use the command tableFile - ttImportFromOracle

  Execution of the order and got an error, as shown below:

  c:\oracle>ttImportFromOracle -oraConn myUser/myPassword@myDB -tableFile C:\oracle\table_list.txt
  Error: Invalid Line 'mySchema.myTable2' in file 'C:\oracle\table_list.txt'
  Use '-help' for more information
  
  

  table_list.txt looks to below, except I have 112 tables total in the list, a table by line, as indicated in the help documentation.

  mySchema.myTable

  mySchema.myTable1

  mySchema.myTable2

  I tried to make the file table_list.txt have only the table (without figure) names and the same error occurs.

  Invalid line is always the last table in the file. So if I take off the table she complains, she complains always just whatever the table is the last in the file.

  Can someone tell me what I am doing wrong?

  Thank you

  Matt

  To work around the error, I just used - tables instead.

• Single line vertical when using the ADF to Scan or copy on HP Officejet Pro 8600

  Printer HP Officejet Pro 8600 Premium (CN577A)

  OS: MS 7 64-bit

  When you use the ADF for my printer HP CN577A Officejet Pro 8600 Premium, I get a single vertical line on the document which is produced. This occurs when copying or scanning, both black and white and in color. If I scan or copy using the glass, I do not get the vertical line.

  I already tried troubleshooting.  I unplugged the printer, left without electricity for several minutes; that didn't fix the problem.  Then, I cleaned the rollers and glass; I always get the vertical line, but only when using the ADF.

  My firmware version is up to date (CLP1CN1150CR).

  What should I check next?

  The only difference between the ADF and scanning flat, from a point of view of the scanner is there on the glass, it happens.  I suggest you get a bright flashlight and examine the corresponsing area hence is the line, it's almost certainly a spot on the strip of thin glass which is being just in the right place.

  I've seen some people suggest that put a flashlight almost parallel to the Strip, it shines from the bottom can highlight the area problem.

• Problem with lines in Illustrator using the Wacom Tablet

  Hi all

  I have no idea why I'm having this problem in Illustrator. I use the small Intuos Pen Tablet (CTL-480), and my lines in illustrator is really strange. Even when I turn off the pressure in the brush settings, there is a gap in the line (it takes just one line of the same thickness). The Tablet works perfectly in Photoshop, but because I use the tablet to create art using plates (typography), it is easier and better for me to use illustrator. You are not sure that someone else had a similar problem or know maybe a setting I could change or try to fix it?

  I have attached a picture of the problem.

  

  

  Thank you for your help.

  This is a known issue.

  If all you want is a line single width, do not use brushes. Use the pencil tool and a simple blow

  If you apply a calligraphy brush, apply the effect zig - zag to it with a value of 0, then a setting of about 100 (turn on the preview to adjust)

• Keep the text perpendicular to the base line when you use the string.

  Is there a way to keep the text perpendicular to the base line when using the warp function?  I'm trying to reproduce a decal with curved text.  When I use the string to get the text that is curved like the original, the letters are slightly tilted.

  You could try to make each letter on a separate text layer, then use Image > transform > free transform to adapt the letters in place.

  A lot more control over the placement of the letter and size that warp text offers.

  

• Add a line of DataGrid using the ArrayCollection collection

  Work of one of these, when I hard code do it programmatically is not:
  
  Hard-coding approach 1 - *.
  var acData:ArrayCollection = new ArrayCollection();
  ...
  
  Each DataGridColum has a dataField like "col1", "col2", "col3", etc...
  Therefore, adding items like this works
  acData.addItem({col0:"testa",col1:"testb",col2:"testc",col3:"testd",col4:"teste"});)
  
  
  2 - programming approach *.
  But adding items like that does not work
  for (var j = 0; j < dataRows.length (); j ++) {}
  var t:String = [j] of dataRows m:System.NET.SocketAddress.ToString (); dataRows is of type XMLList, data are formatted as the format above
  I did a breakpoint to check and someone else watch the channel and it matches the format that works.
  acData.addItem (t);
  }
  
  When I try the second approach, I get all the content of the string in each cell of the grid, where, in the first approach, I get "tested" in the first column, "testb" in the second column (without quotes of course), etc...
  
  Anyone know why there is a difference or what I am doing wrong?
  
  Thanks in advance.
  
  
  

  I guess that's because in the second approach, you add a string to your ArrayCollection collection instead of an object as in the first approach:

  acData.addItem({col0:"testa",col1:"testb",col2:"testc",col3:"testd",col4:"teste"});) This is an object with the properties that you add to the ArrayCollection collection

  var t:String is dataRows [j] m:System.NET.SocketAddress.ToString ();. It is a string, not an object
  acData.addItem (t); you add a string to the ArrayCollection collection

  You must take your XML string and generate a new object, as in your first approach, using the End Sub

• How can I stop the process using the trigger Disqualification?

  How can I stop and start the process using triggers in Disqualification?  While planning a job, I can not able to see the folder of trigger / trigger name in the tool palette? What kind of file should be placed in the Triggers folder. If you know someone, let me know. If someone has shared an example script which is very useful for me.

  Thanks in advance.

  Malila Chandra.

  It is a common use case.

  You create a job that has a closed Web Services trigger configured before executing the first phase (right click on the stage in the Task Manager, select Configure, you will then see this screen below), with the work or or jobs you need to added stop. This must be configured to be 'blocking', i.e. the rest of the work expected on the triggering comprehensive action.

  

  Work should have a phase which refreshes the data staging, and another phase (or a phase of post trigger) that returns your work in normal real time (using the trigger on the job).

• even when I stopped any adobe process using the Task Manager I still get error code 86. the download is at 56% then appears the error message

  as the title suggests I get error message 86 that I close all processes from adobe using the Task Manager and always update fails and the 86 error message reappears. I was stuck with this for 2 days. any suggestions please.
  

  Hello

  Please see Error Code 86 | Cloud Creative

  Kind regards

  Sheena