Odd lines/cross appears when you use the vonster vector models

Similar Questions

• Line size changes when you use the rotation?

  Hello: Level: Beginner OS: Windows 7 64-bit

  So, I was using the line tool and then bringing together two lines and then using the object > transform > rotation

  The lines that I draw are 0px wide and 22px high but when I turn them around the Circle line sizes change...?

  Say the two lines are grouped and the first series is 276px on that the next series becomes say 276.346 and then 275.582 and 198.682 and so...

  I went in the palette to turn to see if there is anything I should check, but it doesn't seem as if I'm missing something to the best of my (limited) knowledge.

  I also tried the manual and looked for something like: "why size line would change on rotation" and I looked under transform and rotate, but I did not have a chance.

  As always... Thank you very much for your time

  What you read is the width and the height of the area of the path includes.

  Think of the hand of a clock. When it is at 12 it's thin and vertical. When there is 1, it takes much more space horizontally than to 12.

  You read the area covered by the path, not the dimensions of actual path.

  Basically, the numbers you read represent the pink boxes in this screenshot:

  

  The area required to draw the shape, not the dimensions of the form itself.

• Mysterious keys appear when you use the keyboard

  When I type some letters on my keyboard, it shows other characters with it. Example... when I type r, I pr. [When I type t, I get / t or g, I get] g.

  Hello

  -What is a wired keyboard or a wireless keyboard?

  -Have there been any changes made on the computer before the show?

  Perform the steps in the Microsoft Article for keyboards Wired /Wireless. Troubleshoot wired keyboards that do not or this type of evil characters

  http://support.Microsoft.com/kb/258826

  If you use a Microsoft Keyboard, and then follow the steps in the following Microsoft Article.

  Troubleshoot wired keyboards that do not or only the erroneous characters category

  http://support.Microsoft.com/kb/258826

  Run the hardware and devices troubleshooter.

  Troubleshoot keyboard

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-keyboard-problems

  Hope this information is useful.

• Bad color appears when you use the color replacement tool.

  I use this tool in CS4 on an image with a transparent background.

  When I set the foreground color of R165 G165 B165 and apply, the resulting color on my image is R64 B64 G64. Any ideas why please?

  Replace color seems an unsuitable approach to the task.

  «If you have transparency anyway just lift the part on a clean diaper (make a selection with the rectangular selection tool, layer > New > layer by cutting) and apply the layer Style "Chromakey".»

• The version of my watermark appears when you use the Brush tool.

  When I try to use the brush in action, a version described my watermark appears on my image instead of the brush of the Action.  I don't know what I did, but it's super frustrating... How can I delete?  Help!

  Try to save your as PNG24 watermark that will preserve any transparency.

  Use the file > save for Web

  Choose PNG24 as file type and save it

  Then use the Edit > define brush to create and save a new brush with this image.

• Why new lines appear when you use the eraser

  Help!

  I seem to be the only one with this problem, I tried Googling and my tutorial mentioned none of this...

  When I try to delete a path, new circular paths are created instead! Please see the attachment.

  Also, how do I increase/decrease the size of gum please?

  Thank you

  Sally

  Press C (the shortcut for the Scissor tool)

  then click on the roof at each edge where the hole should be.

  Press A to select tool

  Select the part that is in the hole and remove

• How can I remove the info bubble can appear when you use the patch tool?

  Removing the unwanted parts of an image or repairing older images, the tool most used by me is the patch tool. When I select a patch and move a bubble with measures to know how far I moved this patch appears and seems to ALWAYS be in the way. Some areas to repair are extremely magified and can make or break a natural looking image or not. Darn measure bubble seems to be placed in the possible location of the worst for the exact location of small elements. How can I activate this info bubble from popping up as I'm not why she's still here?

  You can disable it in Photoshop (Edit) > Preferences > Interface by setting the values of Transformation Show Never

  

• How can I get the grid to appear when you use the cropping tool... mine is grayed out

  My crop tool will not display the grid and he is grey.  What I'm doing.

  Hi ECastrillojr

  If please Set overlay tool forever or press 'H'

  

  ~ Assani

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Message box color settings disabled when you use the dialog "Windows color and appearance".

  When you use the configuration dialog box 'Window color and appearance', why are there color settings invalid?  I want to remove the default 'Pastel Pink' value that I find unacceptable.

  I can switch to "Classic Windows" that uses no pastel pink color, but "Classic Windows" does not support "Aero Peek", and the windows look pretty tired.  You can only take "Classic Windows" for many years.

  Color settings are disabled for: buttons, Message box, title of Palette, scroll bar.

  Help, please!

  Me too I'm frustrated by that.   Found the old windows with very honest XP environment.   I used the advanced settings, but has not found a way to save the changes with a label, so I knew that the changes you made.   It is just Frigging trial and error and very frustrating.

  Why are there no way to return either to the default value (not found a default label) or save the settings changed under a name?    It is a productivity KILLER.

  Hello

  Interface user of Windows 7 is theme based. The colors are defined by the theme.

  You still have many color options that can be used to change the colors.

  Right click on the desktop and select Personalize. Click on the color of the window at the bottom of the window box.

  You can select one of the colors in the boxes colored at the top.

  Adjust the intensity of the color with the cursor.

  Click on the color down mixer and you can a lot of variations on all the different color choices.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box, to an area of the page... rather than through a long straight line...?

  When you use the "Fill & sign PDF" feature, is there a way to stretch to resize the text box on a specific area of the page... instead of the text box is in a long straight line...? I do not see there is an option or the ability to do so, just want to confirm.

  Improving the management of multiple line text fields is in our plans, but for now, you need to add manual carriage return (Enter).

  Thank you

  Josh

• When you use the tool of cash withdrawal, the sampled area does not appear.  I remember seeing this before - I've already had the updates of my LR5

  When you use the tool of cash withdrawal, the sampled area does not appear.  I remember seeing this before - I've already had the updates of my LR5

  Is - this balance?

  Press H.

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Transformation nodes no longer appear when I use the online tool

  Transformation nodes no longer appear when I use the online tool.

  They used to show on the square shapes and ellipses and when I open old files with lines they always show on them too.

  Tried to hide and display the bounding box and switch between the selection and direct (black and white cursor tools) but can't get it to show the normal 8 knots.

  It shows only a knot at each end and when I select and drag the tool Selection normal (black slider) it is the same when I use the direct Selection (white slider) tool and is not right.

  Someone at - he seen this before?

  

  It is not possible.

  But you can describe your workflow and how you would need commands selection to work.

  Use this form for your requests for telephone communications:

  Feature request/Bug Report Form