lines of color at the bottom of the clip

Similar Questions

• Satellite L850D - lines of color on the screen of the BIOS

  Hello

  I have a q L850D-12 (PSKGAE) and sometimes when I try to boot in the BIOS by pressing F2, I get vertical and horizontal lines and colorful on the screen some time, I get a beep sound while its weight this and other times I just get the line that I usually remove the battery and put it again and it will enter the bios setup.

  Any ideas what the cause?

  It s just an idea, but maybe it s a graphics card problem.
  In your case, I would ask the authorized Toshiba maintainer for the verification of the material.
  It is best to do while the laptop is always protected by the guarantee.

• OSX suddenly stopped and restarted but does not restart. Lines of color on the screen

  Hello

  I'm on OSX 10.10.5 (I think) at least, I use EL Capitan. I can't tell the exact version, because my computer does not start correctly. The software is installed on an I mac for some time around mid-2011.

  The day began like any other day. I turned on the computer. Opens the web browser and lightroom. All of a sudden my screen turned gray and my second was a line downwards in the Middle, almost as if two screens of office have been posted on a monitor. Screens flashed several times with some funky patterns and then the system restarted with a carillon.

  When he did, white vertical bands turned towards the bottom of the screen while the Apple was displayed at startup. Sold turned screen gray, then rebooted again. This time, the bands were purple. It's the same thing again but next time the lines were orange and the system restarted a third time. At this point, I turned the computer off and tried again, but I was immediately greeted with several orange bands.

  Can someone help me find a solution or help me pin point the problem?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• Re: Satellite L300 - vertical lines of color on the screen

  Hello
  All of a sudden my Satellite L300 has many colored lines running up and down the screen.
  have never seen this before on any pc, so do not know what could be the cause.

  have tried a search on this forum but found nothing relevant.

  need to know if its worth trying to fix...

  Failed to contact Toshiba other than the robot which is useless.

  Thank you

  I can't say for sure, but it might be faulty display.
  What you can try is to connect the external monitor or TV to the laptop and check if there is a problem on an external device. In case contrary it comes to the display and it should be replaced.

  Googling around you can check how much you must pay for the display again and do a rough estimate, if Exchange is the right option or not.

• What is the cause of the vertical lines of color on the monitor HP ZE4900 laptop o? S Windows XP

  I have colored vertical lines on the screen of the laptop monitor, but not on a second monitor connected to the VGA output port

  Ok thank you

• How can I change the color of the clipping path in CS5

  Just installed Photoshop CS5 I use the pen to create a clipping for insulation path. In CS4, the line always in contrast with the background, I was working on. In CS5 is just grey so I can't work on gray background pictures as I do not see the path. How can I change to multi color as CS4?

  In CS4 I could change between gray and color by activating or deactivating the drawing OpenGL from Edit-> Preferences-> Performance. This does not work for me in CS5. I really need the color that I isolate a dark grey bike againsr a lighter gray wall. I keep losing the curved handles against the wall.

  That means that the wall is not gray neutral, there a lot of color in it. In any case, it is not the question. In CS5, they changed the way they display paths when OpenGL is off (probably changed to an another API backstage) that caused these problems. As I understand it, this isn't a bug in itself, it's just a limitation of the API they use now (lack of blend modes, or something like).

  If you want the old way back, then you can try to do a story of request/bug here: https://www.adobe.com/go/wish

• White line to help align the clips?

  There used to be a vertical white line with arrows that would leap upward when I was dragging a clip at the beginning/end of another clip on my calendar... but now it is no longer present. Anyone know how I can go back this feature?

  He was very helpful in cutting accidentally seconds when I drag a clip to the end of another...

  I think you're looking for the snap.

  Make sure that the icon with the magnet is pressed.

  

• Randomly change the colors of the clip from movie at set intervals.

  I have this clip which is solid with 60% of transparency. I have 24 copies of it, with the name of the instances of light_mc1, light_mc2 and so on. What I'm trying to do, is they have their colors transition not only randomly and constantly, but in unison. The transition should be smooth, he can't just instantly red watch in an image, then green in the other. I should be able to see it changed to green, or whatever color is selected at random.

  I've heard say that math () * 0xFFFFFF can help to select the random, but other than that, I'm lost.

  Thanks for the help.

  Directly from the FAQ on the page TweenMax:

  "Can I set up a series of tweens so that they produce one after another? ."

  Of course! It is precisely that TweenLite and TweenMax are for. However if the file size is an important concern and you need not all the fancy Extras those tools, you can just use the delay property in TweenMax. Here's an example where we tint a MovieClip Red over 2 seconds and then move it to a coordinate y 300 during a second:

  ActionScript:
  1. import com.greensock.TweenMax;
  2. TweenMax.to (mc, 2, {tint: 0xFF0000});
  3. TweenMax.to (mc, 1, {y: 300, delay: 2}); »

• Change the color of the cursor

  Hello

  I have a simple coloring book that I have developed. I have almost all of the work, but I can't get the cursor on the current color to a range of color.

  The cursor is a movieclip called 'mycursor_mc' it is a clip inside of this so-called "CursorFill. I'm trying to get the clip of "CursorFill" to change the value currentColour of the dynamic property array index.

  This is the section, I was working on but it does not work:

  var mycursor_mc:cursor = new cursor();

  addChild (mycursor_mc);

  var m = new CursorFill();

  mycursor_mc. AddChild (m);

  Here's the Action script:

  Table to hold the colors

  var colorArray:Array = new Array(0xE97DB1,0xF58240,0xF9ED41,0x82C34D,0x00B0F0,0x935CA4,0xFFFFFF);

  A new instance of the class of color transformation.

  var colorTrans:ColorTransform = new ColorTransform;

  var currentColor:int = 0;

  This adds the ovals on the scene with the corresponding color of the table

  and the mouse click events.

  for (var i: int = 0; i < colorArray.length; i ++) {}

  var marker: Sprite = new Sprite();

  Marker.y = 500 + i * 50;

  var c = new MarkerFill();

  c.buttonMode = true;

  marker.addChild (c);

  colorTrans.color = colorArray [i];

  c.transform.colorTransform = colorTrans;

  c.addEventListener (MouseEvent.CLICK, ovalsClick);

  c.arrayIndex = i;

  var o: Outline = new Outline();

  marker.addChild (o);

  addChild (marker);

  }

  This creates a new instance of the slider clip and adds on

  the scene using the addChild method.

  var mycursor_mc:cursor = new cursor();

  addChild (mycursor_mc);

  var m = new CursorFill();

  mycursor_mc. AddChild (m);

  Hides the cursor by default on the stage, so it will not display.

  Mouse.Hide ();

  Adds an event listener on the stage with the enter frame event that

  on several occasions the latter runs the moveCursor function.

  stage.addEventListener (Event.ENTER_FRAME, moveCursor);

  This feature enabled the x, y of the slider positions customized to the x & there posts

  the default cursor.

  function moveCursor(event:Event) {}

  mycursor_mc.x = MouseX;

  mycursor_mc.y = MouseY;

  }

  This sets the value of currentColour of dynamic property array index.

  function ovalsClick(e:MouseEvent):void {}

  currentColor = e.currentTarget.arrayIndex;

  }

  Adds the mouse click event to the holder.

  holder.addEventListener (MouseEvent.CLICK, holderHandler);

  This function changes the color of the clip to the inside

  When he is selected.

  function holderHandler (e:MouseEvent): void {}

  for (var i: int = 0; i < holder.numChildren; i ++) {}

  If (holder.getChildAt (i) .hitTestPoint (mouseX, mouseY, true)) {}

  colorTrans.color = colorArray [currentColor];

  holder.getChildAt (i).transform.colorTransform = colorTrans;

  }

  }

  }

  It's strange. Try to draw a few things so that everything works as it should:

  function ovalsClick(e:MouseEvent):void {
       currentColor = e.currentTarget.arrayIndex;
  
       trace(e.currentTarget, currentColor, colorArray[currentColor]);
  
       var trans:ColorTransform = new ColorTransform();
       trans.color = colorArray[currentColor];
       m.transform.colorTransform = trans;
  }
  

• How to see the overview of what the clips have applied effects CC?

  Hello

  In previous versions of Premiere CS6, CS5, CS5.5, 4...    When adding an effect to a video file or audio clip he chnaged a small bar of color in the clip he check had added effects.   It was great to preview the timeline and see what clips had added effects.

  Is there a way set CC to see like this?  How quickly look at a timeline with very small clips and see if they have added effects now?  Help, please.

  Cliff

  The badge of fx is the only indicator.

• Change the color of the bottom line on the selection box

  I use APEX 3.2 and have integrated the JSQuery library. I have a region of Type of SQL query report. The first column of a report is apex_item.checkbox. Based on the selection, I need to highlight the line that will be selected using the checkbox.
  
  I have following question in my header HTML page.
  
  < script language = "JavaScript" type = "text/javascript" >
  $(document) .ready (function() {}
  $('input[name=f01]').change (function() {}
  If {($(this).is(':checked'))))}
  $(this).parents('tr:first').css ('background-color', '#FFFFFF');
  Alert ('changed');
  }
  else {}
  $(this).parents('tr:first').css ('background-color', '#CCCCCC');
  Alert ("not changed");
  }
  });
  });
  < /script >
  
  It gives me the alert when the checbox is selected but that don't change the background color of the line.
  
  Any help?
  
  Syed
  
  Published by: rizvi on March 28, 2011 02:28

  Try

  $(this) .children ('td').parents('tr:first').css('background-color','#FF0000');

• Get the lines between colors in Illustrator

  Hello

  I have a problem and I'm looking for some advice. I dropped a raster image in Illustrator (AI) and with the trace function, has turned into a vector image which looks great on my monitor. However, when I load the vector file in PDF format and then open the PDF file, I see a small, light, grey hairlines between colors.

  I do a product for a customer label. He wants a photo (JPEG) for the background. Printing wants vector images to CMYK.

  I am fairly new to HAVE and probably not using 'approved methods' although I took what I thought, is a logical step to achieve my goal.

  I took the JPEG RGB, converted into a .tiff to CMYK. I also tried to convert the JPEG in .bmp and .esp - all in CMYK mode, before moving to HAVE. I also tried putting the JPEG directly in I.

  I dropped these images in Illustrator separately and Live tracks on each. At this point, each attempt gave me excellent vector images in CMYK mode, but went wobbly when I transfer to PDF.

  Curiously, when I make a hard copy of this PDF on a Hi ground digital printer (2400 dpi), the lines do not appear. However, I am still very concerned about these lines, because I send a power off to work on offset printing. I'm sure that the printer will panic if he sees these lines and I am even more worried that these lines may appear in the print process four colors.

  A local graphics person I spoke with that suggested I'd find my solution to scout, but I fiddled a little this feature and could not solve the problem. Although I still wonder if maybe it's where I could find the solution, because when I hit Expand the blue path lines seem to match with the troublesome gray lines.

  Someone else told me to hit Expand and then turn off the Stroke. I think that I did it correctly, but there is no difference. I also didn't see any difference when I applied to the maximum value for the race. Other attempts to find a cure included deselected Resample, then re - sample with a resolution of 300.

  This is driving me crazy and I hope I can find help.

  Matt

  Here's a quick and easy way to get rid of these lines.  Place the image raster in illustrator.  Then click on copy.  Then direct route on the image use, using the preset of 8 colors.  This will give you a very simple version of the photo.  Click on expand.  Then click on paste in front to put a new copy of the raster on the top of the first image.  Use the tracing once again, but this time with a screening of high resolution.  Click on expand.  This should solve the problem.

  You see, these lines are only tiny spaces between the vector objects.  By creating two vector images in the same frame, the bottom a slightly simpler from the top edge, you can get rid of these lines.

  I hope this helps!

• How to: need to take the line and be able to add color to the areas

  I have a bit of drawing that I've vectorized it in outline, I wish I could add coloring to drawings is simple steps where I would theoretically add a color box and some how cookie cut the color on the lines, I can get as much as it is some areas but not in others, I know I'm doing something wrong , can someone help me,

  as in a coloring book, you have the outlines then each area can be colored

  LITTLE,

  Try this:

  1. Select > all.

  2 copy.

  3 group. (Just to group your line drawings, so you can select it later.)

  3 paste in front.

  4 pathfinder Palette: click the icon of the divide more (left, bottom row).

  5 Color Palette: click on a color, as applying to a fill. (The fill icon background/contour part must be at the front.

  6 object > arrange > SendToBack.

  7 separate.

  You should now have an object filled for each region Visual envelope of your work at the chain, under the Assembly-line work in the stacking order. You can re - color filled areas by selecting and changing their fill colors.

  If all areas has not created you can fill a closed path, there is a gap between some lines around this region. You must ensure that all the areas you want to color are less than completely surrounded by paths. In other words, to the method above works, paths that define a region coloring must at least touch each other. (Best to make them pass as either little - although it has less than the weight of the race.

  A similar method:

  1 Select all.

  2 copy.

  3 group.

  4 paste in front.

  5. set the features to round the ends.

  6 object > path > describe the path.

  7. pathfinder palette: AltClick the button Add to the area (at the far left, senior) form.

  8 object > CompoundPath > Release.

  9 choose a colourful filling, none related.

  You should now have a closed path setting inside each visually closed region and a single path describing everything. Delete the latter.

  This method uses the rounded tips to help fill the paths. OutlinePath step converts the paths of the filled shapes, including round earmolds, which hopefully will overlap. Unions of operation Pathfinder those overlapping paths within a single compound path, removing duplication. Releasing the compound path leaves you with the individual subpaths, which correspond to the inside edges of the surrounding features visually closed regions.

  JET

• change the color of the line in a diagram 3D with points - e3DShapePoints

  How can I change the color of line in a type of diagram of e3DShapePoints? I want to use one of the global predefined palettes.

  I managed to change the color of line of brand via:

  Report.Sheets.Item (MySheetName). Objects.Item (MyDiagramName). Curves3D.item (MyCurveName). Shape.Settings.Marker.Line.Color.ColorIndex = eColorIndexGlobalColorPalette3

  but this will not have the legend color unfortunately. Apparently there is no object available within the parameters of the curve line.

  Any suggestions?

  If you cange the color in the definition of the curve of dialogue for 'points' this corresponds to the 'points' textcolor because no line is available. (oMyShape.Extensions.Label.Font.Color.ColorIndex = eColorIndexGlobalColorPalette1)

  Dim oMy3DAxisSystem, oMy3DCurve, oMyPos, oMyShape
  
  Call Report.NewLayout)
  
  Call Data.Root.Clear)
  
  Call DataFileLoad (DataReadPath & "Report_Data.tdm", "CT","" ")
  
  Set oMy3DAxisSystem = Report.ActiveSheet.Objects.Add (eReportObject3DAxisSystem, "My3DAxisSystem")
  
  Set oMyPos = oMy3DAxisSystem.Position.ByCoordinate
  
  oMyPos.X1 = 20
  
  oMyPos.X2 = 80
  
  oMyPos.Y1 = 20
  
  oMyPos.Y2 = 80
  
  Set oMy3DCurve = oMy3DAxisSystem.Curves3D.Add (e3DShapePoints, "MyNew3DCurve")
  
  Set oMyShape = oMy3DCurve.Shape
  
  oMyShape.DataStructure = e3DDataStructureMatrix
  
  oMyShape.XChannel.Reference = "[2] / [1].
  
  oMyShape.YChannel.Reference = "[2] / [2].
  
  oMyShape.ZChannel.Reference = "[2] / [3].
  
  oMyShape.Settings.Marker.Type = eMarkerCircle
  
  oMyShape.Settings.Marker.Filling.UseCurveColor = True
  
  Call oMyShape.Settings.Marker.Filling.SetPredefinedColor (ePredefinedColorred)
  
  oMyShape.Extensions.Label.Font.Color.ColorIndex = eColorIndexGlobalColorPalette1
  
  ' oMyShape.Settings.Marker.Line.UseCurveColor = True
  
  ' oMyShape.Settings.Marker.Line.Color.ColorIndex = eColorIndexGreen
  
  ' oMyShape.Settings.Marker.Filling.UseCurveColor = True
  
  ' oMyShape.Settings.Marker.Filling.ColorIndex = eColorIndexblack
  
  oMy3DAxisSystem.ColorLegend.Visible = True
  Call Report.Refresh)

  It's a little confusing.

  Hope this helps

  Winfried

• How can I change the color of the plots (lines, points) in the collection Scattergraph plot

  For example, I go through a foreach loop and draw two points. How to distinguish this set of plots of the yet to come? How can I change the style, color and have separate lines (instead of on the line connecting everything) for each of my plots? I don't know how to set everything up, but it still does what he wants to do. TIA.

  Hello

  The problem you see occurs because of the following lines of code:

  The _data and _data2 scatterPlot3 value

  _data = scatterPlot3

  _data2 = scatterPlot3

  When you do this, you define _data as _data2 to reference an object of the simple concession - scatterPlot3.  Yes, even if you have (from the code you have posted at least) three slots in your collection, they are all pointing to the same object of point cloud.  So when you change the color for one, it changes the color for them all.  However, I think that you have fallen on the right solution in your last sentence.  If you want to have multiple locations on your ScatterGraph, each with its own color and style, they should each be separate and unique plots in the collection plot of your ScatterGraph.  Based on the code you posted, you'll see this if you comment just the two lines shown above.

  Please let me know if something is still uncertain.

  NickB

  National Instruments