Lines scans since updating to DC.

Similar Questions

• G4010 Scanner is no longer save scans since updating to OS x 10.9

  My G4010 scanner is unable to save the scans since the upgrade to Maverics. The OSX drivers also seem to, have been removed from the support web page. I can scan using Adobe Acrobat, which still uses the HP interface. Image capture reports no scanner available.

  Hi disteele,

  Unfortunately the scan software "TWAIN"-based on the oldest HP is not supported on the Mavericks. "."  Please click here for the software, you must install to scan using Capture of Image.

  Hope this helps,

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• Attached to incoming mail in as files winmail.dat since update iOS 10

  This cannot be opened since update to iOS 10.0.1 and joined a mail of PC's entry in iPhone & Ipad as winmail.dat files. Able to access via gmail online but not by e-mail, phone etc yet another botched updated to apple I think. What happened to if it isn't broken, don't fix it!

  Hi Peterboynz,

  I see that your iPhone / iPad receive are formatted as files "winmail.dat" which you are unable to open attachments. I'll be happy to help you.

  If your Mac email contains a winmail.dat attachment - while this article is for the emails from Mac, the question is the same. Once the sender updates their e-mail applications, messaging on a device iOS and Mac applications should be able to open the attachments.

  In the meantime, he also winmail.dat readers available for both devices.

  Have a great day and thank you for the communities of Apple Support.

• Since updating my iPad iOS 10, using the button home to close or open applications re works intermittently

  Since updating my i Pad for ios 10, the ability to close or restore applications open with a double-tap the home button, now does only intermittently.  Yesterday, it was not working.  Today, it was and I was able to close open approximately 20 applications. Now, it does not, once again.  I've seen some comments somewhere relative to other people with similar problems.

  Hello

  Go to settings-general - accessibility to the 'home' enable finger rest for Open button.

  Who can help.

  See you soon

  Brian

• 30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages.

  30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages. It seems to have something to do with the Visual data on the pages. My MSN homepage gets old and dies every time I open the page after the re-opening and closing of firefox. It takes forever! What is a memory drain? Each open page in a new session of firefox suffer the same fate.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• Can't access my photos more iPhoto since update to El Captain... pictures don't merge to Photo app, how can I restore them?

  Can't access my photos more iPhoto since update to El captain. photos merged to Photo app, how to restore? Another operating system it will correct?

  Cannot access my photos iPhoto since update to El captain

  To use iPhoto on El Capitan, update iPhoto version 9.6.1.

  If you don't have day before the upgrade of the El Capitan, see: user tip Barney: cannot be updated iPhoto because it is not available in the App Store#.

  The El Capitan upgrade removes just the iPhoto in the Dock icon. Have you looked into your Applications folder, if iPhoto is still there?

  photos merged to Photo app, how to restore? Another operating system it will correct?

  You can open the iPhoto library in pictures by dragging the icon in the Dock of Photos in the iPhoto library.

  It requires that the library is on a compatible player.  The library must be on a local drive mounted, not a NAS, and file system must be in Mac OS extended (journaled). The reader doesn't have to be a Time Machine drive.

  What version of iPhoto created your iPhoto library.  If the version of iPhoto is iPhoto 7.1.2 or more, you must prepare the iPhoto with iPhoto Library upgrade library.    iPhoto 11: on the development of library

• Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?

  Cannot open iMovie 10.1 since update to El Capitan. It starts to load, and then closes unexpectedly everytime. Older version of iMovie (8.0.6) still works. Any suggestions?

  Try starting with the ALT key down.  It waits for you to choose a library to open it.  If it does not open your library then there is something wrong with the library.

  Try running after have connected you to your computer under another account if it works, there is something wrong with the configuration of your account

  Try to remove and then reinstall iMovie

  Geoff.

• HP officejet 6700: How can I e-mail a document scanned since the Officejet 6700

  How can I e-mail a document scanned since the Officejet 6700?

  To send a scanned since Officejet 6700 document, follow these steps:

  1. press the power button to turn on the printer.
  2. press on the right arrow to display the second navigation screen.
  3. press the down arrow to scroll through the options of scan and then press the option that corresponds to the document or picture you are scanning.
  a. send an email in PDF format - use this setting if you want to scan and send a non editable text document in Microsoft Outlook or e-mail software.
  b. send an email in JPEG format - use this setting to scan and send pictures or images in Microsoft Outlook or e-mail software.

  Note: You can only send a scanned document if you are using Microsoft Outlook or other software as your primary e-mail program. You cannot use e-mail programs based on the software (for example, Gmail, Yahoo Mail or Hotmail) unless you can send and receive emails from your account by using Microsoft Outlook or a similar program.

• Media Center crashes since update k2502898 has been cancelled during an automatic update

  Media Center crashes since update k2502898 has been cancelled during an automatic update. The cancellation took place on 03/10/2011. Since that time MC opens, then when I click on TV > Live it hangs or does not detect the tuner. Other times it opens, but after a few minutes I can't change channels or use Rarely MC. It works OK.

  I tried to find an answer in the forums but nothing. One day I came across a hotfix package for KB2502898 file 1.0.0.0 version. After installing MC works sometimes. When it does not work I have to install this hotfix package and restart the PC each time until finally it works.
  Since March, 2011, there is also a problem with the GUIDE. Its download is interrupted (probably because MC broke down). Manual download does not work. Even when MC works (after downloading the hotfix package), the guide does not download.
  My PC is regularly updated and protected.
  The version of Windows XP Media Center Ed 2005 is 5.1.2715.3011 (xpsp (wmbla). 061009-1511) Update Rollup 2 with microsoft.NET Framework1.1
  My system is Microsoft Windows XP Media Center Edition Version 2002 Service Pack 3 - Reg nr 76487-0EM-011903-00824
  Could you please help me solve this problem.
  Thank you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2502898-fails-to-install/0da54a82-C14C-E011-8dfc-68b599b31bf5

  Does that help?

• A statement UPDATE changes the line if the update changes the column even value?

  HI -.

  I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  Best regards

  I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Why?

  You try to resolve what made you what are the PROBLEM that select as the solution?

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.

  Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.

  He is not able to determine that the value is the same.

  I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.

  But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.

  Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.

• Viewed files are not synchronized since update

  Since updating my view is not synchronized on my devices only one or two appear on other devices.  It's quite embarrassing and unreliable, as I can't access all my files on my tablet at will.  Records show in the clouds, but not on my tablet. Help!

  Hi abbyj81586203,

  First of all, make sure that link Mobile is selected for devices. Then, it may be necessary to sign out / sign in to app. For more information on the Mobile link, see this page: Get your PDF documents, wherever you are. Link Mobile Adobe.

  Best,

  Sara

• Random crashes since update

  Hello
  I had some problems with my computer these days and can not say what is the cause. It starts fine, Firefox opens very well and I can check gmail and facebook etc and close without problem. Yet, there seems to be a bug that I fall on, maybe if I use multiple tabs or and it happened a few times now, trying to connect to Amazon or using pages which I think can use Flash. Basically, the computer continues to work but is extremely slow - it takes a few seconds to respond to simple tasks, like highlighting of an icon of office and 15 minutes to close. The last time it happened there were about four to six versions of Flash running in the Task Manager and I had to manually stop those using end task. It also happens if I close Firefox, and then try opening it again.

  I think it is a kind of problem of incompatibility due to recent updates - last week, that I have updated to Firefox 27.0.1, AVG Free did a big update, and there are also some updates Windows 7, I downloaded. I should also mention that I installed Trusteer report - because of conflicts with Firefox in the past, I've downloaded the latest version since this is the usual solution, but nothing has changed.

  I don't think it's a virus. AVG has nothing back, I ran Malwarebytes using the system this morning and he found nothing that makes a difference. I have also run a HijackThis scan and you don't see anything that jumps out at me as being irrelevant. The task manager has normal CPU and memory with no program running that should not be. Although I had a problem with the Manager of tasks - immediately after the start, it will trigger the accident if I click to view all processes. As far as I know, no part of Firefox is running at this point so he would have nothing to do with it, but AVG and report are both running, and so far the only other triggers to an accident I found occurred all using Firefox.

  Someone knows something similar in the last days, or any idea what is the cause?
  Thanks for your help,
  Mark

  Just to tie up this thread and help anyone who has the same problem, the dispute was out not to be a problem with Firefox at all but the last updated AVG. I got in touch with them and did some scans for them, but everything went well. In the end, I simply uninstalled AVG in safe mode and reinstalled the latest version. It has been fine since and I gave it almost a week so far. I think it was an error in the patch that was causing the taskbar or the items on it down.

• 5530 envy: Envy 5530 scan since the upgrade from Mac OS Sierra

  Since the update of my Mac to OS Sierra 10.12, I can't scan to computer or run a scan of my computer.  I get an error message "Scanner reported an error" saying that my all-in-one is not available.  I tried to reinstall the driver, which is not very recent (up to HP?) and no help. I have tried everything I can think on my end.

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi