link png with url problem

Similar Questions

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• At CS6 fixed the body with dynamic links AE slow render problems?

  I've got body with dynamic links AE slow render problems similar to those described in this thread:

  http://forums.Adobe.com/thread/904652?start=0 & tstart = 0

  As I understand (and I could well be wrong), if I made a project for which AE projects linked dynamically in (something simple lower thirds of the color adjustment), when rendering AE bits run as a service, which limits the EI bits single processor and actually stops made simultaneous multiple images. That's why I can get very high makes times (essentially no parallel processing), and why play with the number of units allowed for simultaneous frame rendering, or the amount of RAM said that processors can access, did little or no effect on the total render time.

  Supposedly some AE point would be changed as it has used Media Encoder to make it is made (even as Agency), thereby speeding up rendering for any project of which parties linked dynamically in AE.

  We did it in CS6? If not, any idea when that is scheduled to occur?

  It turns out that it is a 'feature '. A kind gent on the AE forum has pointed out to me a document that I have already read many times trying to understand that and has fact me understand it finally:

  http://help.Adobe.com/en_US/AfterEffects/CS/using/WS92A6319B-B1EB-4b49-A09A-9FFE83E6CD37.h tml

  And it's right there in print at the bottom: "Note: a linked After Effects composition will not support made simultaneous multiple images of multiprocessing"underlining.»

  So the answer to my question is no. Adobe that has not yet set. I really hope they do well. This is a killer of serious performance at the time of export. Large enough to allow a use AE for everything that affects all images (such as color grading, or denoising) completely useless to me. Sigh...

  And Yes, I did a feature on that request.

• Firefox is configured as the default browser, but if I click on a link in MS Word, the link opens with MS Internet Explore. Why?

  Firefox is configured as the default browser, but if I click on a link in MS Word, the link opens with MS Internet Explore. Why?

  I have the same problem, but the difference is in the opening of the MS WORD hyperlinks to download documents (for example http://ntv.spbstu.ru/2011/hss_2011_3.pdf#page=145 ). This link wants to call MS IE.
  At the same time, all the HTML links are opened in FireFox.

• Can someone help with the problems of email account? Messages from the console?

  vcyman , March 9, 2016 13:16

  I had ongoing issues with my Mail months including Spindumps and just doesn't look good, so I changed the e-mail settings in the past according to the directives of the ISP, but now the incoming server is grayed out, more it's time to see if my overall situation needs some changes. As I am researching the current issue of the evolution of the e-mail settings, I see the information that can be linked to a larger problem, so I'm including that in a larger context.

  I use my Web site for most of my email accounts and received error messages indicating that the certificate is not valid. I contacted Hostway and learned that they have their own encryption and don't require SSL, but they said Apple mail works best if I use their specific settings instead of those I have. The server settings entering my accounts existing messaging site are shaded out and immutable. What is the best way to make changes without causing more problems?

  I tried to move the mail account plist.to the trash and restart hoping that would disable the accounts but it didi not work. Or I sign out to iCloud and make changes?

  MORE INFORMATION

  In/Library/Application Support / Mail / Online Account Types/com.apple.updated.mailaccounts/MailAccounts.plist, the Account.plist includes an e-mail account which is Ameritech and not logged into my site.

  in Library/Mail/it is V2 and V3. V2 is V2/MailData/Accounts.plist. V3 contains no Accounts.plist. in MailData. I printed the Accounts.plist. and there are 22 pages of data. Each e-mail account is repeated at least three times and it seems connected to the when I made changes to the account settings in the past.

  This may be related to a larger problem because I have error messages related to the e-mail in the console.

  09/03/16 12:05:22.644 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM DCs [365]: securityd_xpc_dictionary_handler cloudd [429] copy_matching error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.648 PM cloudd [429]: error SecOSStatusWith:-[50] error Domain = NSOSStatusErrorDomain Code =-50 'query lack the class name' (paramErr: error in user parameter list) UserInfo = {NSDescription = query missing class name}

  09/03/16 12:05:22.649 PM Mail [634]: cannot load the draft for documentID: C265D900-C6A3-48B9-AF60-C83FE29A7AED

  09/03/16 12:05:22.705 PM Mail [634]: cannot load the draft for documentID: E1D3029B-C2BF-425E-8F67-32C190B420CF

  09/03/16 12:05:23.142 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.144 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.417 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.432 PM]: looking for iCDP status IDDM 61149625 (checkWithServer = 0)

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: error XPC while checking if iCDP is enabled for IDDM 61149625: error Domain = NSCocoaErrorDomain Code = 4099 "the connection to the service named com.apple.cdp.daemon was invalid." UserInfo = {NSDebugDescription = the connection to the service named com.apple.cdp.daemon has been invalidated.}

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.435 PM]: connection Daemon invalidated!

  09/03/16 com.apple.AddressBook.InternetAccountsBridge [501 12:05:23.436 PM]: [AOSAccounts]: [__49-[ACAccountStore (iCloudAccount) icaAppleAccounts] _block_invoke]: accountsWithAccountType returned the error: Domain = com.apple.accounts error Code = 9 '(null) '.

  09/03/16 12:05:23.446 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:23.716 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:05:24.076 PM sandboxd [139]: com.apple.Addres (501) ([501]) deny com.apple.cdp.daemon mach-search

  09/03/16 12:05:24.626 PM Mail [634]: CFNetwork SSLHandshake failed (-9807)

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: key :-25300

  09/03/16 12:11:40.263 Safari [624] PM: KeychainGetICDPStatus: status: power off

  09/03/16 12:49:52.821 PM Mail [634]: * the Assertion failure in French-[IMAPParseContext _parseStatusResponse], /Library/Caches/com.apple.xbs/Sources/Mail/Mail-3112/IMAP/Connection/Responses/ IMAPParseContext.m:956

  09/03/16 12:49:52.821 PM Mail [634]: exception IMAP response analysis: tried to parse a response from status without knowing the separator character.

  I'd appreciate any suggestions.

  Is your IMAP account?

  You have stored messages slot "on my Mac"?

  If create you your account in a new user, it works correctly?  (see below)

  See my answer in a similar debate. Let me know if you need more assistance.

  Re: The first time to open Mail.app: opens the window Import Mail Message - crashes during the infinite-import cycle how to break it?

  Re: Certificate error. When the message appears you must choose "see the certificate", then select "always Trust ' in keychain."

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Place in the new user by logging in under the Apple in the menu bar.

  Log in to the new user.

  You can skip the connection with an Apple ID, unless you want to test an iCloud account. Select continue, then jump.

  Open Mail and add your account. If it's a POP account, make sure that you do not select "remove copy from server after retrieving a message," on the Advanced tab.

  

  You still see the issue?

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

• I need a list send me Windows based utility of magnification for XP, am a MSN user with vision problems and cannot zoom in easily on what I have.

  I need a list, sent me to my XP Windows-based magnification utilities, am a user of MSN base with vision problems and cannot zoom in with what I have, and the work of the "Magnifier" somewhat well but could use something better.

  Any ideas?

  Hello

  Please refer to the links and check if it helps.

  How to set accessibility features for people who are blind or who have low vision in Windows XP

  http://support.Microsoft.com/kb/308978

   

  Windows XP accessibility tutorials

  http://www.Microsoft.com/enable/training/windowsxp/default.aspx

  Overview of the magnifying glass

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/magnify_about.mspx?mfr=true

  I hope the information is useful!

• Latitude E7470 external screens with Dock problems

  Hello

  I have a Latitude E7470 for work and when I started to use it with my docking station for external monitors, I was noticed a similar problem as grew up in the thread below. One of my two external monitors would be (seemingly at random) twinkle time or periodically to a point where he was distracted. In addition, I see the graphics card down several times after the publication of this kind of problems.

  

  I implemented the "fix" that has been bound (and marked as the answer to the thread) over lunch a week ago, and more things are unhinged from there. Basically, I'm at this point cannot connect to all external monitors through the docking station. I resorted to having one monitor connected via HDMI, but hardly conducive to the work environment and I would really like my monitor Setup several back (even with the problem of flashing, at least).

  Is it possible to undo the actions that I ran, or is there a fix more up-to-date for this problem?

  Link to the "difficulty":

  Any response and advice would be greatly appreciated. I really do not have to resort to obtaining a different style docking station (USB 3.0) if I can help.

  Hey all!

  The link:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=WNV4C&FILEID=3534260691&osCode=W764&ProductCode=latitude-e7470-Ultrabook&LanguageCode=en&CategoryID=VI

  Was just sent this by Dell Support.

• SX20 and link ISDN with TC6

  Hi guys,.

  I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call.

  I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.

  I use H323 network and I don't use SIP between SX20 and ISDN link and with the old version, I could receive and make calls. Now when I try to dial the ISDN using the new interface TC6 endpoint indicates that it does not find the ISDN link.

  Thank you for your help,

  Adrian

  Hi Adrien, Valentine's day.  Theres something happens with outgoing enabled on the link and the Codec for this, and we have two CDETS opened on them.  There are always SIP service is enabled on the Codec with link and link itself.  Codec uses IPV6 local links for the link itself.  Even if the sip xstatus on the codec has its inactive etc, the codec message still SIP REGISTER to the device registration link.  Link runs a FWD SIP process that handles the request.  Sorta like a mini SIP registrar if you want.  Codec will send the message to REGISTER using link-local IPV6 address.  Example of message is less than 200 Ok.

  77582.64 SipPacket PacketDump: Proto: SIP, name: REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0, Direction: outgoing, RemoteAddress: [0000::000:0000:0000:cd39]: 15070, GroupEntity: b27d07c1f5f298c492db68040b320ca6, time: 77582634 content:!

  77582.64 SipPacket REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0

  77582.64 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport

  77582.64 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.64 SipPacket CSeq: 47083 REGISTRY

  77582.64 SipPacket Contact:

  «': 5061; transport = tls >; + sip.instance =»

  77582.64 SipPacket of:; tag = 116a994ac2281c72

  77582.64 SipPacket to:

  77582.64 SipPacket Max-Forwards: 70

  Road to SipPacket 77582.64:

  77582.64 SipPacket allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM

  77582.64 SipPacket User-Agent: TANDBERG/518 (TC6.0.0.876266)

  77582.64 SipPacket expires: 3600

  77582.64 SipPacket authorization: Digest-nonce = "d9605a7da8be22af8c0e7f52b3de4a5f5125fcd3", domain = "MARCIE", qop is auth, username = "djkvvknn", uri is "sip: [0000::000:0000:0000:cd39]"

  ", response ="3b27b753cb9bcf38cc2431b767bce643", algorithm is MD5, nc = 00000002, cnonce ="84addca2a68f6c5f9b657a94653a4bae"

  77582.64 SipPacket supported: replaces, timer, 100rel, gruu, way, way out

  77582.64 SipPacket Content-Length: 0

  77582.64 SipPacket

  77582.64 SipPacket >!

  -----------------------------------------------------------------------------------------------

  77582.65 SipPacket SIP/2.0 200 OK

  77582.65 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport = 41246; receipts = 0000::000:0000:0000:c52a

  77582.65 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.65 SipPacket CSeq: 47083 REGISTRY

  77582.65 SipPacket of:; tag = 116a994ac2281c72

  77582.65 SipPacket to:; tag = e84d13204776ebc2

  77582.65 SipPacket server: fwd

  77582.65 SipPacket Contact:; (+ sip.instance =""

  77582.65 SipPacket Content-Length: 0

  77582.65 SipPacket

  77582.65 SipPacket >!

  -------------------------------------------------

  I removed my own addresses, so you get the picture here.

  It is the same for the link.  Link will send REGISTRY as well to himself.

  Even if your using H320 as outgoing Protocol call, messaging between the codec and the liaison unit is still SIP as the outgoing call is still SIP of the codec for the link even if you chose H320.

  You can see all happening all by running: Journal ctx sippacket debug 9 and connect the output to see the messaging back and forth between devices.  This is why the Service SIP on the codec cannot be disabled.

  The outgoing enabled on both devices and it records not as what Adrian has met is odd. So the question has been filed and is under investigation.

  CSCue57128 - SIP in a strange state connecting to link ISDN (Codec)

  CSCue73049 - outbound SIP on ISDN link activation causes lose her registration (link)

  These are new, so the visibility may not be there yet.

  If you see a problem with the link is not not able to register, check to see if outgoing SIP are enabled on the link.  If so, turn it off and start.

  Do the same on the codec as well.  Disable outgoing SIP and restart the computer.  There may be some cases, you do not see this, as the investigation continues with the bug above two ID's

  I hope this helps.

  VR

  Patrick

• Office jet while a 6600 PRINTER with scanner problems. but I can't scan where I have a modifiable document because only let's scan me documents I can not edit

  original title * Bubbles44

  I have an office jet while a 6600 PRINTER with scanner problems. I am trying to scan to my hp Pavilion 23 all in a computer with windows 8, but I can't scan where I have a modifiable document because only let's scan me documents I can not edit! HELP ME PLEASE!

  Hello Sharon,

  Thanks for posting your query on the Microsoft Community.

  I would be grateful if you could answer the following questions:

  How the computers are connected? If they are connected as a workgroup or domain?

  Method 1: Disable the security software and check if the printer works.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: You can turn off the Windows Firewall and see if you can print.

  1. Press the Windows key +X key.
  2. Select Control Panel.
  3. Click on the firewallof Windows .
  4. Select enable the Windows Firewall On or off on the right next to the sign.
  5. Select the radio buttons Turn off firewall under Private and Public network settings

  Warning: after reviewing the issue, turn on the firewall.

  Method 3: Refer to the suggestions for the following links.

  How to troubleshoot printing problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps and let us know the State of the question, we will be happy to help you.

  Thank you.

• I've just updated to Photoshop, CC 2015.0.1, and I can't do 'Quick export in PNG' with several plans to work more? Any ideas?

  Update Photoshop CC 2015.0.1, I can do is no longer the 'Quick export in PNG' with several work plans more.

  I currently work with about 10 + work plans and I normally ' file > export > rapid export in PNG ", I had no problem in the previous version of Photoshop, but since I updated yesterday to the latest version, is no longer shows the pop-up asking where I want to save the png and instead" does nothing?

  Any ideas?

  Thank you

  Rob

  Please try and reset the default Photoshop preferences, if you do not customize your Photoshop after the last update.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• And anyone who has used the creative cloud cleaner to help with installation problems?, and anyone who has used the creative cloud cleaner to help with installation problems?

  And anyone who has used the creative cloud cleaner to help with installation problems?  I should try?

  Hi Alison,.

  You do not specify the issue that you are facing, but you can restore Photoshop CC 2014.Please use the link below to find out how to install an older version of any Application Adobe CC.

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

  Link to adobe vacuum as you said use the Adobe Creative Cloud cleaning tool to solve installation problems

  Cloud troubleshooting creative risks troubleshoot Adobe Creative Cloud download and installation issues

  Let us know if that helps you solve/Rolling back Photoshop.

  ~ Assani

• I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  I created a document in Photoshop CC with URLS and hyperlinks.  I want to take this document and convert it to PDF AND I wan't these URLS and hyperlinks to be clickable.  How do I do that?

  It works very well.  Use the screening of high printing quality, but think about what resolution for your graphics card.  In fact if you have higher res images online versions, you can hot link to them from the PDF file.  I used to publish a magazine of the club until a couple of years, and while I've used InDesign, output to PDF format was exactly the same process

  http://www.marlboroughcameraclub.org.nz/photo-news/Arti/photo-news-2013/

  If you want to go one step further, take a look at this example, which uses the SWF to the page turn effect

  http://www.f11magazine.com/current.html

  I assume that your document is a good single page?  Photoshop is a clumsy tool for multi-page documents.

• How to save a PNG with an alpha right or fat?

  Long story short, work in broadcasting and a new piece of equipment like the png files.  I know how to save png with transparency, is not the problem.  I don't know how or if this is possible is to save with an alpha right or fat.  At the moment we feather or extend the edges to past the alpha to say a logo and save it as tif, psd, or .tga.  This way once it is indexed on video or something else, the edges look good, no bad black border... it is logical, explaining probably not very well.   But move to png files, I have no idea how to do an alpha right or fat because he sees the transparency.  I mean that if I have feathers on the edges, a png will see this right, since there is no alpha?

  I hope this makes sense?

  > If we don't fill the transparent areas and semi-transparent image with the colored part of the image, we have usually get a dirty key/matte or a lot of fringes.

  This means that your other software and hardware is not reading/interpretation of the PNG file correctly.

  PNG saves with everything that is in the pixels in the transparent area - because they are supposed to be transparent and not seen.

  If you see artifacts in the transparent areas, then something is wrong with the software displaying the PNG, because 100% transparent should not be visible at all.

  Almost, it looks like someone could not read the documentation and specifications and try to treat the PNG as premultiplied format.

• Loading external png with transparency

  Hello

  Im trying to create a system of navigation with a few buttons as3.0.

  Each button is a png image.

  When the import of images to the stage im I don't have problems of transparency, but the problem is that they are enough, not smooth not especially

  because im animating the using TweenLite.

  I thought that the only way to do this correctly is to load all images using as3 in bitmap objects and then use the smoothing property.

  The problem is that whenever I attribute the png to a bitmap object, I lose the transparency of information and get a white background...

  Anyone know how I can keep transparency information of png on the bitmap object?

  Thank you

  Here is a little code that loads a PNG with transparency, it softens and placed on stage.

  var a: Loader = new Loader();
  a.Load (new URLRequest ("spider.png"));
  a.contentLoaderInfo.addEventListener (Event.COMPLETE, done);

  function done (e: Event) {}
  var bit: image Bitmap = e.target.content;
  If (bit! = null) {}
  bit. Smoothing = true;
  }
  addChild (bit);
  }