I have a Genunine Windows XP (Home edition) installed PC imy. My RAM is 3 GB. Can I upgrade my system Windows Vista withuot spend the extra money?
The product key for my Windows XP Home Edition is: XXXX-deleted-XXXX. While working in the PC, I get a MESSAGE"blingin on-screen ' OSB LOCKED: I want to know how to stop the message often displayed blinging."
My second question is can I upgrade my system Windows Vista freely.
My Hotmail ID of single widows is: [redacted]
Rigaut
First of all - do not post in a public forum product keys.
Second - "OSB LOCKED"... Of course you did not mean "OSD LOCKED? (a 'd' and not a 'B'...)
OSD is the "On Screen Display" and has nothing to do with what version of Windows you have - but with yor monitor. Look here:
http://www.thefakegeek.com/2009/04/how-to-unlock-an-OSD-lockout-problem/
http://h30434.www3.HP.com/T5/other-desktop-PC-questions/OSD-locked/TD-p/40291
Last - is impossible to freely pass your system to Windows Vista. Windows Vista is a product different from Windows XP and you will need to obtain a license.
Tags: Windows
Similar Questions
-
Activation of WINDOWS VISTA oem with another oem drive?
HI I have a computer with windows vista business on that key. Apparently, I do not have the original OEM drive but I have a dell windows vista Enterprise drive. the product to activate my acer desktop computer?Hello
A manufacturer of recovery disc is designed for a particular brand and computer model; they are not interchangeable.
Here is the link to order the Acer recovery disks:
And if the Acer never included a drive to purchase, you should have a recovery Partition on your hard disk to reinstall Vista to how it was when new.
With an Acer, you press Alt + F10 at startup to start the process of recovery back to new condition.
See you soon.
-
I have Windows XP Home Edition SP3, 32-bit and IE8. Do I need to upgrade to Windows 7?
The upgrade to Windows 7 is a personal decision. Chances are that if you can do what you need to do on Windows XP then it is 'useless' to upgrade. If you plan the upgrade anyway, you should first check to see that your hardware is supported under Windows 7. To do this, Microsoft has provided a program of "Windows 7 Upgrade Advisor" to run on your current computer.
<>http://Windows.Microsoft.com/UpgradeAdvisor >
HTH,
JW -
How long should I wait for Windows XP Home Edition install on a 80 GB HARD drive
I waited over an hour for the Windows XP Home Edition install on a 80 GB HDD & NO reboot or setup menu appears on the screen. What seems to be the problem?
Change your HARD drive on the IDE slot primary. Then restart.
-
Original title: Windows Vista (former)
I have an old windows vista on comp. (from 2003), I can get a newer version? I have a metman.exe close. How should I do? In addition, how to find the value of Associations on my computer? Help, please.
Hello
See if that helps you.
http://Windows.Microsoft.com/en-AU/Windows/change-default-programs#1TC=Windows-Vista
http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Before you try to upgrade to a later operating system (what to buy) read this notice.
And Microsoft sells more than 7.
Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.
If this is not available, Windows 7 will not properly work for you.
Run the "Windows 7 Upgrade Advisor.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
Check if your specifications are compatible for Windows 7:
"Windows 7 system requirements"
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
"Windows 7 Compatibility Center" for software and hardware:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 upgrade paths:
http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx
«Installation and reinstallation of Windows 7»
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Do the following before upgrade you to Windows 8.1.
Check if the manufacturer of your computer/laptop has Windows 8 drivers available for your model.
If this is not available, Windows 8/8.1 not install and work properly for you.
There is a lot of information in this first link from Microsoft:
Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here
:
http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
"8.1 for Windows system requirements.
http://Windows.Microsoft.com/en-us/Windows-8/system-requirements
@@@@@@@@@@@@@@@@@@@@@@@@@@@
Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.
http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
@@@@@@@@@@@@@@@@@@@@@@@@@
And to Metman.exe:
"How easy to clean an infected computer (malware removal Guide).
https://malwaretips.com/blogs/malware-removal-Guide-for-Windows/
See you soon.
-
I bought a copy of Halo 2 for Windows Vista drive during the Christmas holidays and after that I installed the game, valid and registered the product key with the installation program, I load the game to connect to Games for Windows Live and he informs me that "your product key invalid. It seems that through my research on the Internet, I have to request a new key to use my game. I called Microsoft Technical Support, and told me to come here to get answers on how to get a new product key. Apparently Microsoft Engineers could give me a new key from what the woman for Microsoft said.EDIT: I received a reference number for Microsoft colleagues to use to search for my problem:121229016843033
Hello
Thanks for posting your question in the Microsoft Community!
We have a dedicated team that leans on issues with Halo 2 for Vista.
You can post the question here:
http://forums.haloonwindowsvista.com/forums/
You can also refer to:
Solve problems with activation for Microsoft games problems and mapping programs.
http://support.Microsoft.com/kb/960480
"Invalid product key" error in Microsoft Games, MapPoint, or Streets & Trips.
http://support.Microsoft.com/kb/812467
Support for the Microsoft Product Activation issues.
http://support.Microsoft.com/GP/cu_sc_prodact_master
Support for common problems of PC games.
http://support.Microsoft.com/ph/7745
I hope this helps. Please let us know if you need help.
-
Does anyone have experiences with Windows Vista on a Satellite M40-129?
Hello
does anyone have experiences with Windows Vista (Business) on an M40-129? Any suggestions on the proper drivers and advice are welcome.Best regards
SaschaHello
I have an owner of the M40 motorway m but I didn t install Vista on my laptop.
Why? good Vista needs a lot more material resources like the XP.
In addition many additional applications that are running on my system are not compatible with Vista.
Last but not lease I didn t find the drivers of Toshiba for the M40 on the Web site.I think that the drivers Vista missing on the page is not a problem serious because important factors as driver graph, sound driver, lan and Wlan driver can be downloaded from the website of chip manufacturing.
Anyway, if you want to install Vista on your M40 I would create an additional partition and install the OS on the second partition.
In this case, you can use the two BONES; XP and Vista.To my knowledge the Vista installs a clean boot manager and it should be very easy to switch between XP and Vista.
Best regards
Good bye
-
Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?
Hello
Detect and automatically fix problems of CD/DVD
http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFCPlease make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I have problems with window vista boot as well as with the windows updates.
Windows vista does not restart. I have to go int recovery and channge the computer to an earlier point in time.
In addition, widows update will not work. Simply runs for hours and downooads nothing.
What can we do about it?
Hello
1. don't you make changes on the computer until the problem started?
2. do you receive error messages when you start?I suggest you perform a repair of the system using a Vista installation disc.
See these articles for help:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem -
I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it. Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive. I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive. I know the other option is to do a clean business, but I would avoid this possibility if possible.
need an answer as soon as possible... Thank you
I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it. I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive. I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive. I know the other option is to do a clean business, but I would avoid this possibility if possible.
need an answer as soon as possible... Thank you
Hello
The best way is to clean install and start over.
In addition, it is not legal to have both installed version that the license is for a single installation.
If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.
See you soon.
-
Windows Vista cannot complete the update of windows since July 2016
Windows Vista cannot complete the update of windows
Since the last update July 2016
no error message, just perpetually "check updates".
everything I start the update of windows
help please
Hi emiquestion:
Long 'check for updates...' crashes and slow window updates are a currently a problem common to many users of Vista SP2 - please see the workaround suggested, I posted yesterday over BluesBlaster WINDOWS VISTA 32-BIT updates.
Note that it is a temporary workaround and updates slow Windows will probably return each Patch Tuesday (the second Tuesday of the month) after Microsoft also releases a new batch of updates to security for Vista SP2 and IE9. Since September 2016 Patch Tuesday updates are published tomorrow (13-Sep-2016), it would be wise to wait a day or two to execute step-by-step instructions posted on June 16, 2016, in m #l's thread of updates does not, he has been looking for updates for hours and save yourself a bit of extra work this month. Dalai normally updates its list of Windows kernel mode driver (Win32K.sys) implemented to date required the same evening that the Patch Tuesday, updates are published by Microsoftto the http://wu.krelay.de/en/ .
------------
32 bit Vista Home Premium SP2 * Firefox v48.0.2 * NIS v22.7.1.32 * MMFA Premium v2.2.1
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS -
How can I stop windows vista without updating the updates
How can I stop windows vista without updating the updates because it affects my computer in error mode and I have to restore to get vista to startup after I reopen it later
Hello
You can change the settings for windows update to check for updates but let me choose whether to download and install them.
Change how Windows installs or notifies you of updates
You can also check in the update to the update history recently failed, double-click the update to get the error code and let us know.
See the Windows updates are installed
You can also read the following article to reset the Windows Update components and check.
-
Windows Vista freezes on the Welcome screen
I have windows vista. When windows is booting is stuck on the Welcome screen. I'll repair & restore option and return for a few days and connects properly. After the new updates of windows at the time of commissioning it are stuck on the Welcome screen once again. How do I solve this problem
Hey sbamel,
Welcome to the Microsoft Answers site.
Please restore the system to its state when he worked by doing system restore, in the same way as you did previously. You may consult:What are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaOnce you do the system restore, you should be able to boot to the desktop.
Now install updates one at a time to determine which update is causing this problem.Install Windows updates
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updatesUsing Windows Update in Windows Vista
http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspxOnce find you the update causing the startup problem, after back and let us know so that we can help you.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?
Hello
· You have an earlier version (trial version) of Corel painter, installed on the computer?
Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.
See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333
Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus
-
Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle
Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for
downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies
Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle
Hello Randle,
You can use your favorite search engine & download any third-party software that might be used to.
Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.Hope the helps of information.
Maybe you are looking for
-
HP Pavilion F4U57EA #ABu 15: recover the system back to factory settings
Have a HP laptop, had a major viral infection therefore decided to adjust the system settings of the invoice from the recovery partition. Not just Boot device not found and just see menu BIOS only. Where can I get the ISO images to build a DVD to ba
-
2012 of LabVIEW and MATLAB use
Hello. I am using the Matlab data plugin (http://zone.ni.com/devzone/cda/epd/p/id/4178) with LabVIEW 2012. I installed the plugin and the installer says that the installation was successful. However, the plugin does not appear in the list of plugins
-
Is it POSSIBLE to install additional hard disk in DV7 4073NR?
Hi all I want to install an additional hard drive in my DV7 laptop 4073NR, is it possible? The cams of laptop computer with a hard drive, I have removed and installed an a SSD, I work with both? With windows installed in SSD and files in the groin? I
-
All new computer, blue screen of death/accident
My boyfriend and I bought a new computer 3 weeks ago, it was an e-machine. Kept crashing, got the blue screen of death error. Back to Best Buy for a new computer. Compaq Presario. Has taken a House. The same problem. Returned to Best Buy and exchange
-
What is a Teredo Tunneling Interface Pseudso has a disk problem and can I fix it?
My Windows 7 was freezing after I let it idle for a while. I have to do a hard reboot. Recently, I noticed that I had Dell support help agent and Dell update on my computer but I did not the it. They have been installed at the time my warranty missed