Link the Eloqua Customer Central points to EU and Topliners... what support?

Similar Questions

• On windows, the command prompt window (XP) start appears and closes what can be the problem

  On windows, the command prompt window (XP) start appears and closes with 2 to 3 seconds what can be the problem

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  Try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you put the computer in mode normal startup such as suggested in the article.

  Check if that helps.

• Enter the value custom page point to submit the message

  version 4.2.1 on 11g 11.1 (AIX): I am building an application with a custom process performed on submit after validation. This will execute a PLSQL proc that I pass one argument, a value of ID. I am wanting to view this ID value in process customized for the success or failure messages, but do not find the right way to do it, as APEX seems to consider my expression in the form of data, not a reference to a variable. I tried the different forms of reference to a variable in the documentation, but not not good luck. Can someone straighten out me on this method? Last result is, although the 2 1st words are from the APEX:
  
  Intervention to treat. «updates completed for ID ' & p2_data_id.»

  Sounds to me like you have should work. This is what works for me. I have an anonymous PL/SQL block with a process Point to submit - after calculations and Validations. It was the success of the process and process failure Messages and I put in the value just as it should.

  CANCEL reset succeeded for '&P3_ST.'.
  

  And it works for me.

  Howard

• What is the HP Customer Participation program 13.0 and do I need? DeskJet F4440.

  I just want to know if it's too much space because I do not use it. Is this a program my printer needs or is this something els and I can delete?

  Hello

  As far as I know, it presents statistics on how the product is used to help HP to develop and improve their products, so I imagine that this could well point out any error that meets your printer.  It is not responsible for the updates - you must have a separately installed application called HP Update which is responsible for this.

  Of course, every system is different, but I can say that I uninstalled without loss of functionality - I also remember receiving a similar warning when uninstalling.

  As a point of interest, in the early stages of the installation of the suite of the printer, if you select the Advanced Options, you can select not to do to install this application (and other optional components such as Photosmart Essentials, shop supplies etc.).

  The link below is a thread on another forum about what you might want to read.

  http://www.msblog.org/2007/04/16/HP-customer-participation-program-software-causing-memory-leak/

  I hope this helps.

  Kind regards

  DP - K

• How can I change the account of flight that is linked the Hawaii adventure Pak?

  How can I change the account of flight that is linked the Hawaii adventure Pak?

  You must contact billing support, please click contact us at the bottom of: http://support.xbox.com/en-US/pc/billing-faq

• Measure the distance between 2 points of glare

  Hello

  Does anyone know how to measure the distance between 2 points (attached Image) glare. The image shows 10 sets of points of glare. I appreciate if you can guide me to process the image and produce the algorithm to detect the 10 sets of points of glare and measure the distance from each game.

  Thank you

  Farid

  Check if this will do

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• hpqtra08.exe - Entry Point not found error. The Get procedure entry point Module F < [not found in KERNEL32.dll dynamic link library.

  Original title: hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  (This keeps popping up on my screen and I don't know how to get rid of it. Can you please tell me what to do?)

  Hello

  ·         When exactly do you get this error message?

  ·         Did you of recent changes to the computer before this problem?

  ·         You are able to boot to the desktop?

  You can follow these suggestions:

  Method 1:

  If the previous step fails, follow these steps:

  a. restart the computer in safe mode and disable the HP service and check if the problem occurs. Follow the steps described in the following steps:

  b. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  c. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  d. Click Start and run, type msconfig, and then click OK.

  e. the system dialog Configuration utility appears.

  f. click on the Services tab.

  g. Click to select the check box Services HP Digital Imaging Monitor or hpqtra08.exe.

  h. click OK.

  i. When you are prompted, click on restart to restart the computer.

  j. after reboot check if the problem occurs.

  Method 2:

  If the C:\Program Files, download and run the Microsoft of the link Security Scanner to make sure that your computer is not infected with the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• Cannot install Internet Explorer 8, error: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  Original title: the ENCODEPOINTER procedure entry point could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.

  PACKAGECUSTOMIZER. EXE-

  I just built this computer and Windows XP support.  In order to use IR, I needed to update in softtware.  The following error messages we received during the download process.  The procedure entry point ENCODEPOINTER could not be located in the DYNAMIC LINK LIBARARY KERNEL32.dll.  It is one of the error messages that I received everything trying to downloand IE8.  The other was: SHREGGETVALUE W procedure entry point could not be located in the DYNAMIC LINK LIBARARY SHLWAPI.dll.  Because of these two errors, the software was never fully charged.

  What are these codes and how can I fix them?

  Hi CharlesPortillo,

  Follow the steps in the article.

  How to install Internet Explorer 8

  How to solve Internet Explorer 8 installation problems

  For reference:

  How to solve problems when you install or uninstall programs on a Windows computer

• Adobe Acrobat 7.0 - reinstalled on the new PC, impossible to activate, the Adobe customer service sent link to download the new? others? Version. Installed, but on the installer said series

  With raw interface of Adobe, I thought that the screen that gave me was to ask the question; He didn't inform me that I was typing the subject line. But unless clunkily review:

  Have an old but legitimate copy of Adobe 7.0. I had to get a new computer. I reinstalled A7.0 of my disks, but Internet and phone reactivation failed. After having jumped through the independent windows on the Adobe site, found the link to Customer Service chat. The representative told me that I had to download a new one? different? A7.0 version leave a link, he sent me. I did it.

  I have successfully downloaded the new? version 7.0 and installed it. But the installation, when I was asked for my serial number, he said it was an invalid number. I tried again, without dashes, without success. I went back to the Adobe Customer Service, where a person told me that I had to download a new? different? A7.0 version. I told her to re-read my original post, I had already done. After a long wait, she told me that she did not know much about A7.0 and told me to go to the Adobe communities.

  So, Adobe communities, here hoping one of you has the most knowledge about the installation of Adobe Acrobat, Adobe Acrobat Customer Service!

  Thank you

  Marc

  Sounds like you are trying to install with the ORIGINAL serial number provided with your product rather than the NEW one with the download.

  Adobe do support the last two versions (10 and 11) so if they have knowledge of 7 at all it's just a lucky accident...!

  Furthermore, I hope that you install on an old computer to Windows XP, because you won't get far in Windows 7 or Windows 8 with this version...

• Where is the dialog box stars and polygons to change the number of anchor points on a custom shape? I can't find it anywhere!

  I need to change the number of points in the star, I have created or a polygon. I can't find the box where you change than any where in Illustrator CC. In the previous version of Illustrator it always popped up after that I created the form, but now I can't seem to do it in the CC version.

  Double click on the tool before using it or use the arrows as you draw to change the number of corners or cmd/ctrl and drag to resize the outer circle independently of the inner circle.

• How to select the photos I want to import in the import Windows 7 Wizard, and how to change their name to a group of the name custom when importing?

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  Has features missing from Windows XP in Windows 7?

  I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.

  In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard.  It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately.  I imported thousands of photos in this way.

  This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them?  It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?

  To illustrate this point, let's look at my current situation.  I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture.  Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name.  It has been easy.  This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name.  Want to see pictures of St. Peter's Basilica?  If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010»  Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.

  This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP.  It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).

  So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7?  I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.

  Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!

  ===========================================
  Perhaps the following links will propose a few ideas:

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
  (don't forget to extend "Import in the view settings" at the bottom of the page)

  Windows 7 - How to make photos from my camera to my computer?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

  You might find the free Picasa software or Windows Live Photo Gallery
  to be useful:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Windows live Photo Gallery
  http://explore.live.com/Windows-Live-Photo-Gallery
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Picasa
  http://Picasa.Google.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Trying to understand how the Eloqua cookies work and relate to a user

  Greetings,

  I'll just start where I think my basic understanding is for the moment and move what I seek to clarify and accomplish.

  High level understanding:

  
  

  • The user hits your Web site that contains the "Eloqua traceability Code" in this topic.
    
    
  • Cookie is created that is grouped with ".". Eloqua.com.
    
    
  • The user goes to a form and submits their contact information OR surfed a bit before hitting a form
    
    
  • … At this point, I get a little misty... *.
    
    
  • Eloqua treats the presentation (or create a new record or at the e-mail address and adds the information as prescribed in the existing record)
    
    
  • (Will not enter treatment programs because they are not relevant to my question)
    
    
  • Eloqua is to the top of the confirmation page

  * So here's what I'm foggy on...

  1. How/where the cookie will be created. I followed to this 'image' tag in the elqImg.js file. (http://now.eloqua.com/visitor/v200/svrGP.aspx?pps=3 & siteid ={SITEIDHERE} & ref2 = elqNone & tzo = {TIMEZONECODE} & ms = 933 & elqCookie = 1). This is the only method of creation of the cookie, calling this URL?
     
     
  2. This GUID in the ELOQUA cookie, is the one that is now linked to the folder of the user once they succeeded to convert?

  The goal

  What I do, it is a construction of a method aside server to validate users return, those who have converted for example via a form and are known to me.

  I have an idea what happens to the code, I'm just here to chop the process on the side of Eloqua how it handles data as well as what look for it system to properly attach the USER = this cookie GUID (if that even happens).

  If it's worth whatever it is we're always on Eloqua 9 If this has an impact on the method.

  Any help is appreciated.

  Thank you kindly

  Hello Adam,.

  I'm not quite clear on the use cases that explained you at the end, but I'll explain how the creation of cookie:

  When you followed the scripts on your page - in this case, you have the old synchronous tracking scripts, the call to the function img.js below

  results in the creation of cookie. Please note that there is no code client which translates into the creation of cookie, but when this line of code above is executed, this triggers a call to our svrGP.aspx page - as you have already noticed, and exist on our server-side. This page performs certain functions among which is to create a GUID and drop a cookie on the browser if it isn't one already. This page is also responsible for the creation of a visitor profile, which is a record in our visitor table in the database that has a GUID primary key - which is what contains the Eloqua cookie.

  Thank you

  Tarek

• Why don't any Adobe can help me? It's the worst customer service of worlds on the planet company!

  Three telephone calls to their toll-free number. Each of these calls, I had to pay because their number is only good in the United States. Total time on the three calls was 35 minutes that cost me $1.50 per minute.

  On the right, there is loss for me over $ 50 just so that I can have fun trying to register for their cloud after creative effects for $19.99 per month.

  
  

  My Paypal address and permanent residence is Canada, and yet I am temporarily to Mexico at the moment, so when I tried to open an account at Adobe, their system automatically assigns me as being a citizen of the Mexico, so now, if I try to make a payment via my Paypal there will be an address conflict, and the payment will be denied.

  
  

  I've been waiting to chat with the third representative of Adobe for so long that I have the time to open a new browser and come to their forums in the hope that a current employee can help me assign Canada in my country, so I can order the service.

  I am seriously considering going with another NLE after affects.

  
  

  How can a company that has the right products to treat their customers so badly?

  
  

  It has been 2 hours so far in an attempt to pay and I'm no closer now that I was 2 hours ago.

  
  

  Take a look at this joke of an excuse for dialogue of customer service so far. I would like to point out that the last person I was speaking with said, "Let me transfer you to customer service" that was 35 minutes ago and nobody took the cat so far.

  
  

  Your file number: 0216100824

  You are now chatting with Joshua.

  3:00:08 PM CDT

  Marie Laure:

  Hello! Welcome to the Adobe Customer Service.

  3:00:18 PM CDT

  Marie Laure:

  Hi Daniel

  3:00:21 PM CDT

  Daniel Brown:

  Hello

  3:01:14 PM CDT

  Marie Laure:

  I understand that you are looking to change the name of the country in respect of the account. Is this correct?

  3:01:18 PM CDT

  Daniel Brown:

  Yes

  3:02:06 PM CDT

  Marie Laure:

  I see that the name of the country in respect of the account is the Mexico.

  3:02:49 PM CDT

  Daniel Brown:

  Yes. I guess it's to pick up the IP address because I have no other idea why Adobe would think that I live in the Mexico. My Paypal account is Canada, as my permanent residence.

  3:03:42 PM CDT

  Marie Laure:

  I'm sorry to inform you that you will need to use the account in the same country as the one in the account to use the subscription.

  3:04:39 PM CDT

  Daniel Brown:

  But how am supposed to add an address for the Mexico when my Paypal address is a Canadian Paypal address? Wont that cause a denial of payment for the contradictory addresses?

  3:06:34 PM CDT

  Daniel Brown:

  PayPal knows my address is in Canada, so if I give you a Mexican address, which will be a problem?

  3:07:23 PM CDT

  Marie Laure:

  Can I transfer the chat to our sales team as they will help you better?

  3:07:27 PM CDT

  Daniel Brown:

  Ok

  3:08:30 PM CDT

  Marie Laure:

  Please stay on the line while I transfer the cat.

  3:08:35 PM CDT

  Daniel Brown:

  Ok

  Please wait while transfer you to an operator at Adobe Sales.

  Thank you for your patience.

  In the meantime, you can try our community forumswhere experts are available 24 hours a day, 7 days a week.

  You are now chatting with Joshua.

  3:08:56 PM CDT

  Marie Laure:

  Hello! Welcome to the Adobe Customer Service.

  3:08:56 PM CDT

  Marie Laure:

  Hi Daniel

  3:08:56 PM CDT

  Daniel Brown:

  Hello

  3:08:56 PM CDT

  Marie Laure:

  I understand that you are looking to change the name of the country in respect of the account. Is this correct?

  3:08:56 PM CDT

  Daniel Brown:

  Yes

  3:08:56 PM CDT

  Marie Laure:

  I see that the name of the country in respect of the account is the Mexico.

  3:08:56 PM CDT

  Daniel Brown:

  Yes. I guess it's to pick up the IP address because I have no other idea why Adobe would think that I live in the Mexico. My Paypal account is Canada, as my permanent residence.

  3:08:56 PM CDT

  Marie Laure:

  I'm sorry to inform you that you will need to use the account in the same country as the one in the account to use the subscription.

  3:08:56 PM CDT

  Daniel Brown:

  But how am supposed to add an address for the Mexico when my Paypal address is a Canadian Paypal address? Wont that cause a denial of payment for the contradictory addresses?

  3:08:56 PM CDT

  Daniel Brown:

  PayPal knows my address is in Canada, so if I give you a Mexican address, which will be a problem?

  3:08:56 PM CDT

  Marie Laure:

  Can I transfer the chat to our sales team as they will help you better?

  3:08:56 PM CDT

  Daniel Brown:

  Ok

  3:08:56 PM CDT

  Marie Laure:

  Please stay on the line while I transfer the cat.

  3:08:56 PM CDT

  Daniel Brown:

  Ok

  Please wait while transfer you to an operator at Adobe Sales.

  You are now chatting with 'Phillip' at Adobe Sales.

  3:09:14 PM CDT

  Daniel Brown:

  Hello Phillip

  3:09:17 PM CDT

  Phillip:

  Hello Daniel, greetings!

  3:10:03 PM CDT

  Phillip:

  I see you want to place the order of creative cloud to 49.99 per month, am I right?

  3:11:54 PM CDT

  Daniel Brown:

  Not correct. I want to buy the AE CC for $19.99 per month. Your system seems to want to link my account with the Mexico. I guess it's because my IP address is Mexican I'm here temporarily to Sayulita in the Mexico. Yet, my Paypal account and my normal residence is Vancouver to the Canada. I am wanting to change the country setting on my account at the Canada so that when I pay you guys for the Paypal service will not see an address in conflict and refuse the payment to you guys.

  3:12:57 PM CDT

  Phillip:

  I see... You cannot add an address for the Mexico when your Paypal address is an address Paypal Canada

  3:13:33 PM CDT

  Phillip:

  In addition, we have not an option for settings on your account in the Canada. However, you must contact Adobe customer service team.

  3:13:55 PM CDT

  Daniel Brown:

  You can connect?

  3:14:31 PM CDT

  Phillip:

  It's better that you call at the 800-833-6687

  3:14:35 PM CDT

  Daniel Brown:

  no no no

  3:14:59 PM CDT

  Phillip:

  Well, I would like to transfer this cat.

  3:15:03 PM CDT

  Phillip:

  Please stay on the line

  3:15:22 PM CDT

  Daniel Brown:

  three failed attempts at the phone so far. Each call is $ 1.50 per minute, and I waited 35 minutes without getting anywhere... I'm just still in waiting. So far, it has cost me over $ 50 by going this way and nothing has been accomplished. I have

  3:16:58 PM CDT

  Phillip:

  I'm sorry for that

  3:17:11 PM CDT

  Daniel Brown:

  Yes $50... I'm sorry as well

  3:17:32 PM CDT

  Phillip:

  I'm transfer now

  3:17:35 PM CDT

  Daniel Brown:

  your phone costs cost me more than the service I want

  Please wait while I transfer you to an operator at the Adobe Service.

  The country of your Adobe ID is the Mexico. Your payment details must be from the same country. This is the help page to the change in the associated country to your Adobe ID

• Model warp around a central point - advanced transform?

  Hello!

  My name is David and I am having trouble with a pretty hard distort, it is still not possible, but I thought that if anyone could help me it would be you, the wonderful people of Adobe forums.

  Basically, I'm trying to distort a pattern on its center point, in a radial Mansion (the template file is obviously square in photoshop). If you imagine the model on a flat surface, the string I am trying to achieve is as if one had to enter the central point of the surface and remove it directly from the side - see image below for the Visual...

  

  I am trying to reach a model which is a flat file, but looks like you're looking directly at the end of a pointed tip of a cone that used to be a flat surface with the boss on this subject.

  I have attached a link to a template file here - http://tinypic.com/r/2iu5mo0/6

  I know it's a little obscure string but I would be very grateful if any of you, photoshop gurus could help me! If you have any questions please just shout!

  Thank you very much

  David.

  Edit - Sorry I should probably mention that I'm CS5.5 under Windows 7.

  Extended?

  If so, try 3D > new shape from layer > cone.