Link to attached WORD Doc.

Similar Questions

• When I send link invisibly attached to a Word, the link address in full is set out in the message I get

  Why, when I send link invisibly attached to a Word, is the address of the link entire wrote in the message that I get? Can I fix?

  
  

• Cannot find Word doc that has been saved as an attachment

  I myself have sent an e-mail with a word doc attached.  Opened in Word 2007, make the changes and click "Save" (not "save under").  Seems to be working, no error message from the word and no warning when you quit word.  Now ICAN can't find the document anywhere on the computer.  Even tried looking for a keyword within the document and only found the original version, attached to the email.

  If the file was really saved, where is he?

  His loss.  You must save an attachment of office and then work on it.  WinMail is not an office application, so it does not allow to edit attachments, you must first save it.
   
  Steve
   
  "WEARY_111" wrote in message News: 971e3018-fa99-4ff2-893b-8aad947ff999...

  I myself have sent an e-mail with a word doc attached.  Opened in Word 2007, make the changes and click "Save" (not "save under").  Seems to be working, no error message from the word and no warning when you quit word.  Now ICAN can't find the document anywhere on the computer.  Even tried looking for a keyword within the document and only found the original version, attached to the email.

  If the file was really saved, where is he?

• A single hyperlink without link convert Word doc

  Hello

  I forgot to mention in my title, I use RoboHelp 2015 and publication of WebHelp.

  I have a project where my first topic provides a list of the tasks that can be performed from the main screen. I create WebHelp and Word to convert to pdf format. When I convert the RoboHelp project to the printed Document, there is an article on a bulleted list that does not convert to a hyperlink element in the Word doc. The other 15 elements convert. The WebHelp project works very well.

  I deleted the topic to the table of contents and replaced it; I made sure the links work and connect to the correct subjects. I tested the links in the HR project and they work fine. As I say, all others 15 links work very well in HR and in Word.

  Any suggestions on what I should look for?

  Thank you

  MDawn

  The version of RoboHelp and your output at the beginning of the post, rather than in the title is fine. In fact, preferred.

  Is it a project that you can share? See the Contact page on my site and send the project, in accordance with the instructions, it. Make sure that include you a link to this topic and please send an e-mail not directly project.

  If this isn't the case, then the list pointing to other topics which are all in the same project and is the subject of the list point to the printed output? The fact that it is in the webhelp does not automatically mean that it is in the printed output.

  See www.grainge.org for RoboHelp and Authoring information

  

  @petergrainge

• I tried to open a Word doc attachment in my email and get a window stating "Creating an Adobe PDF file"

  When I try to open an attachment in my email Word doc I get a dialog box saying "Create Adobe PDF, PDFMaker missing files, you want to run the installer in repair mode?"   I tried not to convert a word in a PDF doc daughter.  I just tried to open the word document.  The next window that appears is the Adobe Acrobat window.  If I want to open a word doc file that I received in my email I first have to register the word doc on my desk open my program Word, then drag the Word doc recorded from my office to the document that is open in Word. program.  It started just in the last few months.  Never happened before.  What is happening here?

  Apparently, you tried to open a DOC file to PDF quite awhile, and your system is confused. In any case, go to a DOC or DOCX file (or both) in the Windows Explorer and right click. Select open with and select WORD - always check open with button.

  Check that the other WORD documents open correctly from the Explorer. Try again your e-mail address. If e-mail is not fixed, then look in the list of applications in your email inbox (some do) and fix the problem here. It might also be useful by turning on the display of extensions in Explorer, so you can see that a file is in fact a word with the appropriate extension. (just try to cover as many opportunities as possible now).

• Is it possible to attach a photo .jpg with a Word doc to form a printable photo?

  Is it possible to attach a photo .jpg with a Word doc to form a printable photo?  That's a photo of the team and I want to add the names under

  Thank you!

• Open a new window when linking between PDF docs (link originates in a Word doc)

  Hello

  I saw this discussed historically general topic, but couldn't find any resolution.  I have a Word doc (let's call it A.doc) linking to a PDF doc (let's call it b.pdf). Once I have convert Word doc to PDF (A.pdf creation), I want the link en.pdf to open b.pdf in a new window.

  I've seen a number of suggestions that indicate that I can set up the link in Word to do this, use her change the hyperlink > target frame > frame target > 'new window '.  While this works if I click on the link in Word, it does seem to "reporter" once I converted A.doc to A.pdf.  When I click the link en.pdf then B.pdf opens in the same window in time.

  I know how to add manually link in Acrobat.pdf to do this, but I don't want you add manually the link every time I create A.pdf.  I want to create the link once in A.doc and did delay in time, and then open the b.pdf link in a new window.

  I've seen suggestions on adding some HTML somewhere.  Unfortunately, they are not, that I'm viewing the PDF files in a browser.

  I saw suggestions for using the CTRL key at the same time click on the link en.pdf.  Would not be practical, because I have no way to make sure that my users will know it.

  I've seen suggestions on the use of JavaScript, but it would mean (I know) I have to add the JavaScript whenever I convert A.doc A.pdf.  Still, I won't have to do any post-processing of A.pdf after I got it to create.  I want the link in 'just work' A.doc after A.pdf is created, i.e. open b.pdf in a new window.

  This * seems * like a simple thing to do, I hope there is a simple solution.

  BTW, I'm using Word 2007 and Acrobat X.

  Thanks for your help!

  Dave

  I use Word 2003 and Acrobat 10 and links created as you describe defaults to 'new window '.

  You have the 'Open links in the same interdocument window' unchecked in Edit > Preferences > Documents?

  .. sounds too easy... (and your users will probably have to make the change even if they need this behavior, unless you have a very techno IT department that can deploy configuration files large company).

• Code error Update 80070663 by word AND when I try to open a word doc I receives a notice of installation!

  Microsoft .NET Framework 3.5 Family Update (KB959209) x 86

  Download size: 1.4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  This update applies to Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2. The Microsoft .NET Framework 3.5 Family Update provides compatibility rolled updates for customer reported issues found after the release of Microsoft .NET Framework 3.5 SP1. This update is provided to you and under Windows Vista and Windows Server 2008 license terms.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=133330

  Help and Support:
  http://support.Microsoft.com

  The update shown above has not updated dozens of times.

  ALSO - when I try to open Word or any Word Docs I get a pop-up windows installer! What is everything?

  Thank you!

  Hello

  Please follow the links and check the issue:

  Method 1:

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I suggest you to install the update KB959209 manually from the link below:

  Microsoft .NET Framework 3.5 Family Update for Windows Vista x 86, and Windows Server 2008 x 86:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16211

  Method 3:

  You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps.

• Cannot view Word doc, Excel, PDF out of any Web site

  Having problems w/display nothing Word docs, excel, pdf etc out of sites - I downloaded windows 2003 and 2007, my laptop is a sony viao help more since I downloaded windows 7 - I Caan can't see my photos as I could before

  Original title: I can't see docs from the internet

  Having problems w/display nothing Word docs, excel, pdf etc out of sites - I downloaded windows 2003 and 2007, my laptop is a sony viao help more since I downloaded windows 7 - I Caan can't see my photos as I could before

  1. There is no a such thing as Windows 2003 and 2007.
  You must meant Microsoft Office 2003 and 2007.

  2. it's Vista forum. Windows 7 forum, section programs, is at this link:
  http://social.answers.Microsoft.com/forums/en-us/w7programs/threads

  3 Microsoft Office forums is at this link:
  http://social.answers.Microsoft.com/forums/en-us/Group/Office

  4. for your information only.
  Here and extract to have MS Office 2003 and 2007 on the same computer:

  You can install and use multiple versions of Microsoft Office on a single computer. For example, you can install and use the suites Microsoft Office 2007 and Microsoft Office 2003 on the same computer and programs. However,we do not recommend this.
  Source: http://support.microsoft.com/kb/928091 http://support.microsoft.com/kb/928091 for the benefit of other people looking for answers, please check the suggestion as answer if it solves your problem.

• I can scan a word doc?

  Original title: "Scanning"

  I can scan a word doc? I learn by hit and miss and I did an invitation by pulling some clip art, backgrounds and type. I can't copy because it is superimposed with clipart, and I don't know how any full doc. So instead of printing then it scans, I was wondering if I can scan my docs?

  "PJSalahub" wrote in message News: f7e18531-c298-4108-bf2b-494af24dd5fc...

  I can scan a word doc? I learn by hit and miss and I did an invitation by pulling some clip art, backgrounds and type. I can't copy because it is superimposed with clipart, and I don't know how any full doc. So instead of printing then it scans, I was wondering if I can scan my docs?

  What is your ultimate goal in the 'scanning' the document? I try to read between the lines here, so, if it's to send by e-mail, I would recommend that create you a PDF file using one of the many PDF printer drivers (I use PrimoPDF to http://www.primopdf.com/index..aspx.  You should install this program, then it creates a printer driver.  In Word, you make a file, print, and then select this printer.  He then asked a file name.  Place the file in a location where you know the location and then let to print.  Once done, you can then attach the PDF file to an e-mail message.
   
  If you want to "scan" for another reason, please advise.

• Saved Word doc on DVD - R can't find it?

  Saved Word doc on DVD - R can't find it? I've looked everywhere, including temporary files. Nothing comes and record shows its use 0.  Is it possible possible to recover these two documents? Help? Thank you!

  Hello
   
  We need to know more information about the issue. Please answer the following questions.
  1. don't you burn files of words on a DVD-R?
  2 - is the first time that you use this DVD?
   
  It seems that the files have not loaded successfully to the DVD.
  As the watch of 0 uses disk, this confirms that there are no files stored on the DVD.
   
  However, if you remember the names of word files, and if they are still present on your computer, then you can search for these files.
  To search for files on the computer, follow the steps in the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-or-folder

  Visit this link for more information on "How to recover a lost Word document": http://support.microsoft.com/kb/316951

  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Printer Offline Message When you try to print the Office Word doc

  Message from the printer offline.  HP shows printer status is online with wireless network and computer ASUS says is in line with wireless network and internet but when I try to print a word doc it does not print.  I get a message that the printer is offline.

  Hi Robin,

  Are you facing this printer offline error when you try to print from Microsoft Word?

  Error "the printer is offline" message on the computer and the printer does not print. Offline indicates that the computer has lost a direct communication with the printer.

  I suggest you try the steps from the following link and see if that helps.

  "The printer is offline" Message appears on the computer and the printer will not print: Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c04249080

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Request for refund for the PDF pack because my PDF has not converted correctly to Word doc

  I feel like I'm in the wrong place to ask for a refund, but I tried to solve this problem for some time and this is where I have been guided so I hope that I am using the appropriate channel. Please can you help me ask the refund of my purchase of the PDF package? (order No.. AD015935750). I've been going in circles for months, literally, to cancel my subscription. I need to convert a PDF file to a Word doc and thought it would be something I could use for school, so I downloaded the PDF package for $89 on 5 March, 15. But my account has not converted correctly, so I tried to cancel but just keep in curls, so I responded to an email asking to cancel the subscription of 3-25, which was within 30 days. I do not have a "kick back", so I assumed that the email has passed through. I was check my account for the refund and he was never treated so I looked at my mailbox and to see that I had a bounce email, specifying that the email does not, but the rejection was delayed while I haven't noticed. I've never used except that once so can I please get a full refund? I am a student who was struggling with a very fixed budget and was unable to use the PDF pack because my first document would not convert properly. Below a screenshot shows that I started the process within 30 days of the purchase. Please let me know how to proceed. Thanks in advance for your time.

  

  Hi kristinad36324104,

  I recommend you visit the following link and contact the customer about your question: cancel your subscription or membership. Acrobat, services Cloud of Document PDF

  Kind regards
  Rahul

• I want to export the PDF file to a word doc. I can't find the icon on the right?

  I'm trying to export a PDF doc to a word doc. I've been on the help site, I can't find the icon in the toolbar. My PDF reader is version 9.

  Hi padgetcat440,

  I see that you have a Pack PDF Adobe membership. You can access it directly from this link: https://cloud.acrobat.com (click the tab ExportPDF if want to convert a PDF to Word file). If you have Acrobat Reader, you can also access the ExportPDF function in the tool pane there.

  Please let us know how it goes.

  Best,
  Sara

• How can I insert a multiple page PDF into a Word doc?

  Hello

  I'm trying to insert a PDF file that has multiple pages to her in a MS Word doc.

  I use Adobe Acrobat WI Pro and Word 2010.

  I followed the path of insertion - object - Adobe Acrobat Document, but I only get the first page of the PDF file.

  Appreciate any help you have.

  life

  What you have described is the expected behavior. This is how applications MS Office insert - functions of the object for the PDF files.

  To consume the full PDF we double click on the object (represented by the first page PDF). This indicates the operating system to start the application, the operating system associated with a PDF file.

  With Acrobat or Adobe Reader install one of them is what is usually this request.

  Yes, launching Acrobat, open the PDF file and restores it to the user.

  Of course, this PDF file must be available to the user and by the same road to link when the object has been placed in the Word file.

  Be well...