Linking the time capsule with the iPhone and the iPad. ?

Similar Questions

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• My new Macbook Pro backup in a time Capsule with 2 iMacs. After the first incremental backup but backup every now and again he returned to the backup of the entire drive, why is - this

  My new Macbook Pro backup in a time capsule, as well as 2 iMacs. After the initial backup, it seemed incremental backup but from time to time, he performs a full backup why, is it?

  time to time, she performs a full backup

  What evidence are you using to decide that she performs a full backup?

• The fastest way to remove a sparsebundle on a Time Capsule with two top backups

  I have a time Capsule 2 TB that I currently use to save an iMac and a MacBook Pro.  I recently bought a new iMac and I decided to go back on this new computer. I moved all the files I need and installed all the apps that I used on the other.  After spending a day and a half, make a backup of the sparsebundle on my old iMac (just in case), I am now ready to get rid of this sparsebundle out of my Time Capsule, so I can start back up my new iMac to it.

  Because I also backup my MBP on it, erasing everything simply is not an option at this point. I need to be able to just remove this a sparsebundle, which, of course, must be huge... I think that it is about 890 concerts at this stage.

  I have been looking online for the best way to delete the sparsebundle, but don't know which method is the best and most of the answers are from 2011 or 2012, so I want to be sure there is not something new, I should try.

  Here are the options that I've seen, and I hope someone can point me to one that suits, or give me another suggestion. If it happens that the best, it takes days to complete, so be it, but it would be good to know that the time goes in.

  1. Change the extension of the sparsebundle and then delete this file. This seems little risk to me, but maybe I'm overthinking it. One person said they changed from iMacbackup.sparsebundle to just iMacbackup.s and was able to remove it.  It would actually remove faster? Do not change the size, so I don't know how it works.
  2. Mount the sparsebundle by using the IP address and then delete the sparsebundle like that. This was part of a post that said in fact the best way to remove first had to access it through Windows Explorer, and then delete it. This isn't an option for me, so in the comments I post, I saw someone say to connect via SMB and delete this one. Someone said he worked within a minute for them, but I see not a lot more answers.
  3. Display content of the sparsebundle, then delete the contents of the folder-Band 5, 000-8, 000 at the same time. I just watched showed a guy do that but it took something like 4 days to remove them, and he had to reload between each 5 000 videos a YouTube it deleted. Currently I have about 102 000 items in my folder of bands, so if it takes a day to remove 10,000 of them (according to, I'm looking for both ridiculously long to remove these.)

  Alternative suggestions that someone has more would be welcome.  I just want to be able to get this old one deleted and start backup to my new one, without losing my MBP backup.

  I also found this link, which speaks by using Terminal Server.

  https://jwopitz.WordPress.com/2014/02/07/easy-way-to-delete-a-sparsebundle-from-Temps-machine /.

• I have iphone and an ipad.  I need to synchronize the two and have at the same time on this new computer.  How do I do that?

  All the updated IOS iPhone.

  iPad - last update complete AIO

  new computer - laptop HP with Windows 10

  I need to sync my iphone and ipad to this computer - both have different things on them, but are most of the exact time.  Missing a few songs and contact.

  How can I do both appear on my computer without calling to zero one over the other?

  See this - http://www.apple.com/icloud/setup/

• I use Firefox on my Mac (OS 10.9.2). V29 Firefox has encouraged the synchronization. Can I sync with my iPhone and iPad?

  I see conflicting information about Firefox for Mac OS. It works on my Mac OS X desktop.
  What is the official position?
  If Firefox is not available for iPhone and iPad, is such a product in the pipeline?

  Sorry, that Mozilla has no plan for a version of Firefox for iOS devices. Regarding the Firefox sync service, Mozilla has interrupted the application for some time ago iOS devices, but Favorites on the Go app took what Mozilla has created for iOS and synchronization service. Unfortunately, Firefox 29 has a new version of sync that is not backward compatible, so on the go bookmarks must be updated to work with the new version of Sync.

  I think that the major problem between Apple iOS and Mozilla's 'walled garden' approach Apple software running on their devices and approach open source Mozilla to the software.

• our airport time capsule connects to computers and the internet, but does not record on the usefulness of the airport as being there - is it dying or is their a reset?

  Our computers connect via wifi to a capsule of time to the airport and to the internet, but can't find the time capsule, nor can its hard drive. Y at - it a reset, we can try or he dies. It's only a couple of months.

  Turn about your Airport Extreme for 15 seconds and then power back on. As soon as you see the green light, you should be able to see him for a minute or two in the Airport utility. In the affirmative, and see if you have Back to My Mac active. If so, disable it by removing all the e-mail addresses of the back section of my Mac. Then update your Airport Extreme. Work quickly.

  Many have started having this problem within the last week, probably because Apple changed something in its servers CCMM. A real difficulty would come from Apple, but it should work if you currently have active CCMM.

• With the help of Apple's Time Capsule with Lightroom

  Hi, I just bought Time Capsule thinking that all my photos may be wireless sync or searchable using Lightroom. However, when I tried to open the catalog in Lightroom on Time Capsule, it is said that he can not use network drive! WHAT A BUMMER!  I always hope that there should be another way so that I could use my Time Capsule in Lightroom and do my usual regular fabrics, manage my photos and editing wireless (if it's going to be slow, is very WELL!)

  Please advice if someone has an idea to solve this problem...

  Thank you!!

  You can have all your photos on the Time Capsule disk, but the catalog must be on another internal drive or external.

• How to use Time Capsule with Time Machine and no Wifi

  Situation.  Late 2009 iMac with OSX 10.7.5.  Used Airport Extreme since purchase in early 2010.  Use a modem cable from Arris SB 6141.  Decided to upgrade to 2 TB Time Capsule.  And the problems started.  I put TC in place... Finally, with the help of the people of this forum (thanks).  Transport CANADA does not have the internet connection to the Modem.  New to this forum I discovered that the TC does not like the SB6141.  So I put the Airport Extreme in the network and work like a charm wireless.

  Now, how can I connect the TC to the network or the Mac to use the part Time Machine?

  I tried to put the TC in Airport Extreme with an ethernet cable.  First, the iMac would not recognize the local network by removing printers and the other external USB drive; and my TV got confused on what wifi network with the same name in which to connect.

  Before I hit the reset button on the time Capsule I tried to ask what would be the right steps.

  Thanks to the folks on this forum. Thanks for your help.  Hope you all a good holiday this year.

  You should not have really big questions on Lion.

  Connect the WAN of TC port on the ethernet port LAN AE.

  Configure the TC in bridge. I disable the wireless to EI and let it run in the TC... that's much better work in this configuration.

  The Mac that will backup must really be connected to the TC in direct wireless or ethernet... This will help loads.

  The wireless work better on the TC... If it isn't, then you can swap EI... but I'd be surprised if that was the case.

• need help to set up Time Capsule with hub of sky

  Hi, I bought time Capsule and followed the instructions re. Connection cable internet hub in wide band directly on port WAN on TC. And yet nothing is happening outside orange flashing and message of airport utility saying it could not connect to the internet. I bought an Ethernet cable, just in case and tried to connect it to LAN to LAN, and I was able to create a 'network' but always seeing flashed. Can anyone help? Thank you!!

  El Capo can be really rotten networking.

  The skyhub is a router... I think it's okay... If you connect a computer directly into it, you should have internet?

  The TC may work very well in this configuration.

  Ethernet connector of skyhub LAN WAN TC as you did originally... correctly.

  So I highly recommend ethernet to the computer... because it helps no end. And even to pass the airport utility to use ethernet instead of wireless.

  Here (if obvious really that you would have ethernet under other Wi - Fi... don't know why I found totally by chance?)

  

  The configuration... make the TC must go to bridge mode...

  It is Off (bridge mode) on the network tab.

  And you need to create a wireless network with a different name to the skyhub.

  You can probably do it manually now without too many problems.

  And even without ethernet connection... Although reliable then ethernet is streets ahead wireless.

  Click on the TC icon in airport utility.

  

  Click on change... at the bottom right on the summary.

  Now you can fix it up. Click on the network and make sure that it says Off (bridge mode) I posted my configuration, but you do not follow that... I just allows you to see where everything is.

  

  Click on wireless and fix that up.

  

  You can even click on the base station and correct the name and the master password... so that all the names are short, without spaces and alphanumeric pure.

  NOT RECOMMENDED APPLE NAMES that are FALSE.

  If you have an ipad/iphone the iOS version of the utility is often better to get this right than the Mac version... particularly in the later version of the Mac OS.

• Load new Time Capsule with backup t. m.?

  I have an end 2013 27 "iMac running OS X El Capitan, version 10.11.6, with a new 3 TB Time Capsule. In the process of upgrading my original model A1470, 2 TB Time Machine awkwardly, I managed to detach the tablecloth of the end circuit rather than simply ripped hard drive making rubber on the 2 TB hard drive itself. This time Capsule is actually useless now. I installed the original drive work with my TM backups in a USB 3 enclosure with the intention of transferring its contents to my new Time Capsule. When the original Monte drive, it shows as 3 (?) partitions, labeled: APconfig; APswap; and the data. 'Data' has 84,46 GB of data in files "Backups.backupdb" and "ShareRoot. The other partitions are essentially empty-APconfig with a single file "AFP.reconect_keys" to 24 bytes and a total content of 15.6 MB and APswap without files containing 15.3 mb.

  How to use this original TC hard disk to load my backups Time Machine on my NEW 3 to Time Capsule? I only discovered how to load a T.C. from file to archive hard disk, but not the original files of TC.

  Any ideas will be appreciated.

  What you are, indeed, now doing is to copy/move an existing Time Machine backup 'network', a local disk to another drive (aka, your new Time Capsule) network.

  Basically, Time Machine uses a different backup format with readers local vs. network drives. You now have a backup of "network format" on a local disk. Time Machine will not be able to use this backup 'local', as it is, because it is not in a format that is "local." Sorry if that sounds confusing. It was confusing for me just to write it.

  A method that would work would be to clone the backup, but it only works when the two backups will be 'local format' ones.

  Worst case, I recommend that you come to start a new backup and use the one as archive.

• Time capsule with modem/router

  I just got the phone with Apple support and they told me that time capsule will not work itself but he need a modem/router REQUIRED to work all time capsule. Is this true? Time Capsule is a modem/router. Why on earth someone would buy something for $ 600, which is not even replace the old modem router? I spend $ 200 on a 3 TB hard drive and do the same work. Please answer.

  Time Capsule is a modem/router.

  No, this is not correct.

  The Capsule is a router only. It doesn't have a modem on board. If you have a Time Capsule and you want to be able to access the Internet, you will need a modem to connect to the time Capsule.

  More providers of Internet services (ISP) provide modems/routers and modems to their customers to connect to their service. Please contact your ISP and ask them what they recommend.

• Question conectivity Time Capsule with Windows 7

  Hello

  I am owner of a time Capsule A1309 with 3 TB of memory and it stopped working with my Windows PC for a while. It used to connect normally not long ago, but now the drive doesn't appear and I can't access the time with AirPort Utility Capsule unless I type the IP address. I have a lot of archives stored in the drive and cannot access it from any PC running Windows in my house.

  My Control Panel is:

  • RAM - 8 GB
  • Intel Core i5 - 2430 M 2.40 GHz
  • 64 bit
  • Windows 7 Professional

  I know that the Time Capsule works normally, because I can access it from an old iMac I have here.

  Other details: My Time Capsule is on System 7.6.7 version and I also have the last airport utility installed on my PC.

  Thanks in advance,

  Rodrigo Trindade

  For starters, you have access to the Time Capsule (TC) using the AirPort for Windows PC? The question started the TC to 7.6.7 firmware version after update?

• Time capsule with backup HD on a MBP with SSD?

  Hello world

  I recently bought a Time Capsule from Apple and saved my full 500 GB hard drive which is on my Macbook Pro 13 "(modèle fin 2011)." I was wondering what I need and what will happen if I buy a Macbook Pro the retina which will have an SSD (probably more small size), but also a different logic board?

  -Is the capsule will be recognized by the new Macbook Pro retina and I will be able to continue to save on it, to add?

  -I will be able to access the files that I backed up the MBP Late 2011 by accessing the retina MBP with time Capsule?

  There's something else I should be aware of the based on the experience of each?

  Thanks a lot for your help and your advice!

  On the first startup of the new machine, the installation wizard will ask you if you want to move your user name for the new Machine. Highly recommended for a transition seamles.

  From then after that after a reboot or two and the first time that you start the TM/TC upward it will ask you if you want to "inherit" the TM. Yes

  

• Time Capsule do not connect and save

  Had some problems with my Macbook Pro had to take it to apple and they ended up replacing my hardrive as he could not.

  Since coming home ive tried to make a back up on time capsule and when I try to choose drive to back up with I get a message that says...

  "There was a problem connecting to server airport capsule.

  No idea what this means and how I can fix this please thanks in advance

  If apple has replaced the hard drive... also has recover all your files from the old hard drive?

  They did actually image the reader or they migrate user files and apps?

  You are on the same BONE as before?

  The problem is not knowing what precedes, I can't really advise correctly... I don't want you to clear your existing backup... nor do I want allows you to copy over the top of it.

  The TC must be reset to the factory... no files are lost to do... then I recommend that to start a new backup. If there is not enough space on the TC I recommend that you check the existing backup... Wipe the TC and try again. A fresh clean backup is really important... as well as to preserve the existing a fi there is everything you need him.