Linking the two symbols

Similar Questions

• linking the two sliders property nodes in a graph

  Hello

  I had a chart with 2 sliders. And I have to be able to set the coordinates of each cursor using nodes of property. "However, if I click on the mouse button right button - create - node - cursor - property cursor position - there are only 3 possibilities of 'Everything', 'X', Y ' that links only to one of the sliders (in fact I don't know who). How is possible to link the nodes property of 2 sliders position to 2 sliders in a chart?

  Thank you very much for the discussion.

  Martin Pekar

  Property nodes run from top to bottom. Resize the node property to the four elements as follows:

  

  and two positions of the wire.

• Linking the two switches SF300-8 and gvrp

  After passing the age trying to propagate VLAN one SF300 to another, I think that I finally did it.  It seems that we must implement the GVRP Protocol on both sides of the trunk AND manually create the VLAN on the slave switch.  Now I can ping machines on the two switches that share the same VLAN successfully.

  However; If I try and ping a machine on the passage of the slave from outside in the VLAN, which is a connection routed the master switch, it fails, succeeds the ping of a machine on the main switch.

  What I am doing wrong?

  Hi Nigel, GVRP is basically a terrible (and useless) Protocol.

  GVRP not to dispose of anything, unless it is predefined to what it can affect, the manually fresh General requirements is greater than the configuration comes actually port.

  Configuring you mentioned basically tells me that you built manually the trunk as vlan 1 UNTAG, tag 11 and 42. The GVRP Protocol should do it for you if it is properly implemented.

  To work successfully the port GVRP must send the GVRP join messages, the interface of the receiver must be configured to receive the join messages and then the database of VLAN switch advertising must have these VLANS constructed/defined manually as they are underway in the messages...

  If you need using the configuration, do not hesitate to post what is your goal, I'm sure I or someone can help you if you provide a network, the schema and configuration files.

  -Tom
  Please mark replied messages useful

• Linking the two vSwitches in ESX

  Hello

  I have a question.  I have attached the script with this post.   To set breiefly,

  (1) I'm having an ESX host with a single physical network adapter VMNIC0

  (2) I created 2 vSwitches with the default.  So totally 3 vSwitches it

  (2.1) vSwitch0 - dedicated for the Service Console and VMKernel and connected to VMNIC0 for external connectivity N/W

  vSwitch1 (2,2) - two virtual machines are connected over

  vSwitch2 (2,3) - two virtual machines are connected.

  Please note that the 2 vSwitches (vSwitch1 & 2) are not connected with each other and also unrelated to physics N/W adapters

  (3) the two VMS in vSwitch1 can communicate with each other without any problem

  (4) the two VMS in vSwitch2 can communicate with each other without any problem

  My Question is;

  How can I connect these 2 vSwitches (vSwitch1 & 2) with each other so that two vSwitches virtual computers can communicate with each other

  This question may seem very simple to most of you... I understand... but I don't know how to do this.  Thanks for any help/entries in this...

  Thank you.

  vSwitches cannot be connected together.

  If these clients must communicate with each other, they must be on a vSwitch. The traffic between two vSwitchws must pass through the physical wire. So you have at least two NETWORK interface card to connect two vSwitches as a teddy bear can only be connected to a vSwitch.

  You can always separate the guests using different port groups.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How to connect my Xbox 360 to my windows media player PC? I put the media player to allow the xbox 360 to share files, but how do I link the two?

  I, ve pass through the implementation of guide on the 360 and got the 8-digit code, but where do I enter the code?

  Hi StevenHutchinson,

  You can follow this link & check if it helps:

  Listen to music from your computer to Xbox 360

  Hope the helps of information.

• linking the two hosts esx without switch

  We have 2 esx host currently is ESX4, the other is ESX3.5 (sson be ESX4), we have a direct vswitch which is connected to a switch with 2 uplinks, everything works OK.

  We have another 2 ports on each host that we use to create a unique vswitch used as an internal network. Here's the conencted directly to each other with 2 cables NOT connected to a switch. These NICS have negotiated the correct speed one look d OK, but if I put a virtual machine on each host attach it to the switch with internal uplinks and give them an IP address on the same beach that they cant ping each other

  I know it's a strange config. I can not connect these "internal" uplinks to a switch are we charge £20 per month per 1 GB port which = £80 per month!

  No idea why it does not work?

  You may need to use a cable crossed in this scenario.  You should also be able to reach speeds of 1 GB, with a connecting Cat5e cable - I would check that it's been wired correctly!

  Dan

• I have a doubt... the two Firefox syn account and firefox support account are the same or not

  I have a doubt... Firefox and firefox syn account for both are the same or not change support

  Hello shivarajnaidu, not for the moment these two accounts are completely separate, although it is planned to link the two of them on behalf of persona in the foreseeable future: https://login.persona.org/about

• Is there a way to link the State buttons?

  

  Hi, I would like to know if there is a way to bind the State buttons to activate their steady state together. For example, when the 'Pioneers of Design' link is hovered over, it turns red and links to another page. The yellow image loses the white opaque screen 25% top when it is steady-state and also links to the same page. The two are in separate State buttons. Is there a way to link the two so that when I hover over the image the screen disappears, but also flushed the pioneers link at the same time and vice versa during the overflight of the pioneers link? I know that both can be assembled into a button of the State, but this means that the huge gap between the image and the text would create the hover state as apposed to single during the overflight of one or the other. In addition, I don't know what will happen, because the text links remain fixed when scrolling and the image links are not. Is there a way to do what I'm talking about? Thank you.

  I have the latest version of Muse CC 2014

  There is no built-in way to do reversals rambling, but if you are looking for on the web, you should be able to understand how the respective CSS rules and their implementation as custom HTML or after the publication of the site.

  Mylenium

• Linking the paragraph

  There is this feature in Corel to bind the text of the paragraph. How can I do this in fh so that the text runs off the page next or another part of the document.

  With the text block selected (with the selection tool, not highlighted
  with the text tool), click inside the small box in the lower right
  and drag it to the second block of text you want to enter. When two
  the blocks selected text now you will see a curved line
  linking the two. This can be done between several blocks of text. You
  can change it anytime you want in re-making drag. Useful for something
  don't forget is the special character of "end of the column. You will find under
  Text > special character > column end. This desire of invisibility
  force the following text in the following text block no matter how much he
  room is left in the text block. This is very handy when you absolutely
  want a certain paragraph to begin a certain block.

  Rich

  Sarah wrote:
  > There is this feature in Corel to bind the text of the paragraph. How can I do this in fh so that the text runs off the page next or another part of the document.

• The linker error multiple symbol definitions

  Hello

  I brought a DAQmx project based on Linux to LabWindows CVI 2012 PXI. After completing all the requirements of the conversion and compile successfully, I'm getting tons of the following linker errors for different modules files (just stick

  a subset of these here):

  Several definitions of symbol '_PtrToPtr64' in modules X and Y

  Several definitions of symbol '_Ptr64ToPtr' in modules Z and Y

  Several definitions of symbol '_HandleToHandle64' in modules X and Y

  Several definitions for the "_HEAP_MAKE_TAG_FLAGS" symbol in the modules X and Y

  Several definitions for the symbol '_TpInitializeCallbackEnviron' in modules X and Y

  .....

  I found this message: http://forums.ni.com/t5/LabWindows-CVI/CVI2010-clang-link-errors-with-Windows-SDK/td-p/1425690

  that points to a known issue in CVI 2010. However workaround (allowing the C99 compilation option) is already defined in my project, so this solution does not apply.

  Any idea what could cause these symbols windows.h get redefined?

  Thank you

  Some of the Windows SDK functions, can have the same name as the functions of LabWIndows/CVI. Is your Windows.h file before all the other header files? See the following article for more information: http://digital.ni.com/public.nsf/websearch/69C82671913CAA4986256E9400676E17?OpenDocument

• Can I link together two forms acrobat 9 so that info typed in one is automatically filled in the next?

  I have several forms that are created. In some cases, I need two forms submitted. Both forms have the same information at the top. Is it possible to link the fields of the form so that once filled it auto fills the corresponding fields in the other form? I can't combine the two forms into one, because management thinks it's confusing. Any help is appreciated.

  There are a number of possibilities, but they may not work depending on who are the users of the forms and how the form will be used. For example, if users are the general public and only have the drive, then there is not much you can do. If you have a control on the users machine you and/or they are using Acrobat, there are more options.

• Error 5000: The class 'Particle' must subclass 'flash.display.MovieClip' because it is linked to a symbol in the library of this type.

  Running Flash CS3, I looked at the tutorial from lynda.com on strengthening the systems of particles in ActionScript 3.0 to create a few sparks shooting in an animation.  I'm stuck to what I think is a point really basic, but I can't seem to cross it.  Basically, all I'm doing at this point is to create a class called particle (that I'll learn to do things that the particles to make a little later) bind it to a MovieClip on the stage in my .fla file and use the function to update the particle to move it around the stage in a way defined in the instance (so I can later give properties of different movement to) each as an instance generated the MC).  I know there are easier ways to accomplish my basic task without loading an external module, but this seems to makes it so I have to hurt something very simple, that I can't see so I thought I'd post the code here and see what I'm missing.

  I start with a file called Particle.as in the same folder as my file Test.fla Spark.

  In Particle.as, I have the following code:

  package
  {
  import flash.display. *;
  
  Particles/public class extends MovieClip
  {
  public xVelocity:Number;
  public yVelocity:Number;
  
  public void Particle()
  {
  xVelocity = 0;
  yVelocity = 0;
  }
  
  public void update (): void
  {
  This.x += xVelocity;
  This.y += yVelocity.
  
  }
  }
  }

  So, I declare that all the particles are built with no movement, but if they are explicitly granted an x or y velocity, they will pass by there a lot when updating the instance function is called in the timeline panel.

  Then in my file Test.fla spark, I have a small shape in a MovieClip called Spark.  In the properties of binding of spark, I chose to export for ActionScript and export in first frame.  The class is called Spark and the Base class is the particle.  For testing purposes, I dropped an instance on the stage and called spark.  Then in the layer actions in the first image (the timeline is just the spark layer and the layer actions, a long frame each with no "stop();" so it should run forever), I have included the following code:

  spark.xVelocity = 5;
  spark.yVelocity = - 1;

  function updateSpark(event:Event):void
  {
  Spark.Update ();
  }

  addEventListener (Event.ENTER_FRAME, updateSpark);

  Is what it seems that this should be on every Flash ENTER_FRAME should call updateSpark, which is a function that handles the event update() for the instance of the spark which is a movieclip instance that has an update event that moves x and y of the position of their relative velocity variables.  It seems simple enough to me, but when I ctrl-enter to test the movie, I get the following compiler 3 errors:

  Particle.As line 1: 5000: the class 'Particle' must subclass 'flash.display.MovieClip' because it is linked to a symbol in the library of this type.

  Particle.As line 7:1071: syntax error: expected a keyword (for example function definition) after the public attribute, not xVelocity.

  Particle.As line 7:1084: Syntax error: expecting rightbrace before the semicolon.

  Since I imported flash.display. * and declares the class public particle so it extends MovieClip I have no idea why I get this error of 5000.  I see this issue come up a lot when searching Google and forums, but none of the resolutions that I could find have suggested an approach that applies to me or solve the problem.

  Any help to fix this would be appreciated.  I enclose a zip of the FLA a files as described above in case there is something in the settings of publication that I messed up inadvertently.  In addition, if you can get this to compile without error, then the problem may be due to my Flash CS3 Pro install which will result in the problem isn't with my code and start looking at me in a different direction.

  Thank you

  Scott

  Yes, 'var '.

• Switch between the two button symbols

  Hello

  I'm new to AS, but not new to programming.  I'm using Flash CS4.  Here's what I'm trying to do.

  I have two button symbols, PlayBTN and PauseBTN. They are used to control the playback of the slideshow. When I use one or the other to control the slide show, it works. However, what I want to do is to switch between the two buttons, so that they work together like this:

  1. If the slide show is playing, PauseBTN is visible. If PauseBTN is clicked, stops slideshow and PlayBTN becomes visible.

  2. If the slideshow is paused, PlayBTN is visible. If PlayBTN is clicked, stops slideshow and PauseBTN becomes visible.

  In other words, clicking on the button control not only the slideshow, but changes which button is visible.

  I got this working with a video clip of two frames and bitmaps in static, but when I swap the bitmaps for the buttons, rollovers button stop working.

  Can someone give me some advice please?

  ... Mike

  This is not a flexible configuration.  PauseBtn should be a movieclip with a up more and eventually to the bottom of chassis and PlayBtn either a movieclip with a up more and eventually to the bottom of the frame.  You can then use:

  PauseBtn._visible = true;  or false ot visible property of your control button.

• How to break the two folders that are cross-linked?

  I tried to move C:\users\richard to E:\My Documents ' My Documents'.

  Some how the two directories have become reticulate.

  Make any change in directory caused the same change in the directories of the sentence.

  How to restore the two inventories back to normal?

  I tried to move the directory in E:\ back to C:\, but received a parsing error.

  TIA,

  Richard

  Wednesday, February 5, 2014, 17:20:47 + 0000, Richard332 wrote:

  I tried to move C:\users\richard to E:\My Documents ' My Documents'.

  Some how the two directories have become reticulate.

  Make any change in directory caused the same change in the directories of the sentence.

  How to restore the two inventories back to normal?

  I tried to move the directory in E:\ back to C:\, but received a parsing error.

  The directory c: is not really a directory; It is a library which is
  just a pointer to the real directory on E:, a bit like a shortcut.

  So if you get there via the library or the directory, you are in
  in the same place - E:\My Documents and any changes there are also
  See in the library.

• Problem with the buttons and mouseovers playing & slaughter the same symbols

  Hi all

  I have two nested symbols. On mouse over, the first symbol saturates the image and it goes down. The second symbol makes the image display successively the three photos. On the mouse, stop the slide show, image desaturates and moves upward. It works really well!

  I have a button below it, that once pressed, starts the chronology of the first symbol (saturates the image, and it moves down). It works fine... but when I hover over the image (after clicking on the button), it snaps in and is desaturated. I don't know why it does this... I want the image to stay where he is.

  No idea how to solve this problem?

  Here are the source files: https://dl.dropboxusercontent.com/u/17968737/problem.zip

  Any help would be greatly appreciated!

  Erik

  Hello

  I'm not sure what you wanted exactly, but I did this for you

  Link: http://www.mediafire.com/?16cuqq4ucip7xw8

  see if it's what you wanted

  Zaxist