Links working in the preview, but does not work after the FTP download

Similar Questions

• Why DW does not close after that I downloaded to my site and push the closebutton?

  Why DW does not close after that I downloaded to my site and push the closebutton?

  Hello sorent26443032,

  This kind of problem occurs usually when there are 2 cases of software are running.

  If you are on a windows machine Please make sure that there is that no duplicate instance is running in the the Task Manager for Dreamweaver.

  If you are MAC please check the same in the activity monitor.

  Concerning

  Vivek

• Chapters change in the preview, but will not change after burning disc.

  When making a DVD with separate playlists chapter by chapter,-"project and an overview of the work" works perfectly.

  However, when the disc is in the drive at the time the arrow will hit the second button, playback begins immediately and when

  finished, he returned to the menu chapter as planned, but will not move past the second button to play anything.

  Is this something I'm doing wrong or the submenu would be defective?

  Select the menu (not a button), departed 'auto routing', then drag it as you wish.

  If the buttons are in good condition, you can use the automatic routing. If it's the only button behave strangely, I would just do the manual setting.

• Update KB961118 continually appears in my system tray, but does not install after that many try. How can I remove it. This has happened for a long time. Help

  Update KB961118 continoulsy appears in my system tray, but the update does not install. How to remove OR install. This has happened for a long time. Help

  KB961118 is an option, not the security update. Feel free to hide it & move on with your life. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have an EpsonRX420 it will copy but does not print after that I inserted a new crtridge of ink

  I have an Epson RX420 and inserted a new ink cartridge after what I coud copy but not print

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• El Capitan loaded and running, but does not restart after it turns off

  I just downloaded El Capitan and installed on my iMac which was under Snow Leopard 10.6.8. There are 12 GB ram, and this is a 2009 end clocked at 3.06 Ghz version. The installation went well and it ran OK, everything seemed normal.  The problem came when I close shot tried to start again.  The Apple logo appears, and the progress bar goes about 2/3 of the way and hangs up.  I tried to reboot several times with the same results.

  Try to start safe mode and then restart try safe mode if your Mac does not end commissioning - Apple supportnormally

• Site does not show, after a successful download of ftp host

  I use v7 muse and my domain name is www.fifacafe.com on Godaddy, where I publish on businesscatalyst.com site is ok, but when I upload to the ftp server, it says successful but the site is completely empty

  Hello

  Please visit the following link nothing appear after loading in the browser.

  Kind regards

  Aish

• Question is - can anyone make a guess as to why a feature of Style appears in the layer panel and appears in the preview, but does not print?

  Rich

  It may be that the race is too small to be noticeable on large print media.

  • What is the weight of the race?
  • What is your PPI image?
  • What is your size of the image - height & width?
  • What is your print size?

  Nancy

• G6-1103sa Pavilion, completed the recovery after problems, but does not restart after recovery

  Hello

  I have a Pavilion g6-1103sa, with Windows 7, after a few problems of software I could just get to open in safe mode, so saving docs and images on a remote hard drive successfully, tried to complete a restoration of the system to the factory settings by pressing the ESC key on the switch and selecting the option to do so.

  When the restoration is complete, the there is a message saying that the restoration was a success and the laptop restarts, however all that happensis a message appears saying: your computer is preparing for first use, but then nothing happens

  What can I do now?

  Hello dgreen1004,

  Like the previous step to reinstall the OS from the recovery partition has failed, the only other option is to try a recovery media. Per your request, I am including information on how to get a recovery media. Please open the link following "Research drives HP recovery or a USB HP recovery disc?".

  Kind regards.

• Windows does not start after Windows updates downloading

  I have an IBM Thinkpad R32 with Windows XP, 512 MB of ram and a Pentium 4 processor. Wednesday night, when I stopped, Microsoft downloaded a bunch of updates - 13 to be exact. When I went to start my computer the next day, I got a black screen saying "We apologize for the inconvenience, but Windows did not start successfully.

  When I select 'safe mode' I get a series of files. When I select "Last known configuration" or "Start windows normally" I get a blue screen with "a thread tried to release a source he did not' and the error code that goes in the bottom" STOP: 0x000000E3 "(0X80558BE0, 0X82FCA548, 0 x 00000000, 0 x 00000002). "When I press F8 for advanced startup options, I get the same result to choose 'safe mode' as before, but also the blue screen to 'last known...". "or"start windows normally ".

  I have a recovery disk but it seems to be the 2nd of the 2 discs, and I can't find the first. More I am concerned about the loss of material on my computer (have not saved in a while). My technical skills are marginal - I'm good at copy what is on the screen but that's all.

  Needless to say, I'm a little upset with Microsoft for burning my muddy computer with its updates. I set it so that I have to approve the updates, but I wasn't paying attention when I hit the button turn off with the updates.

  shadiahm,
  Thanks for posting on the Microsoft Answers forum.  The first thing to do is to remove the external devices (printer, USB drives, USB hubs, etc.), then restart.

  If you have your XP cd, you can run a repair installation: http://support.microsoft.com/kb/315341.  If you do not have a XP CD you must contact your PC manufacturer to obtain replacement disks.

  Also, if you have access to your XP, you can start in repair mode and run SFC/scannow: http://support.microsoft.com/kb/310747 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless J6480 prints fine, but does not scan

  All J6480 printer a HP. It was connected to a desktop HP running Windows XP with a USB cable and printed and scanned OK. Computer for office is dead and has been replaced by a Samsung Windows 7 laptop so the XP installation CD does not work. A printer connected to the laptop and it prints fine wireless but does not scan.

  1 downloaded the HP website OJJ6400_Full_13 and I tried to add an another J6480 but he says that there is already one installed in a wireless port. I didn't go ahead because the printer does not print not good. Should I continue with the installation?

  2 Ran HPSDU.exe diagnostic tool and it said ojj6400 USB HP Officejet J6400 is the only installed printer.

  3 HP Digital Imaging Moniter displays the HP Officejet Series_TMP000 disconnectedstatus.

  4 start-all programs-HP shows only HP Smart Web Printing and Officejet J6400 Series. There is no HP solutions Center.

  Thanks for any help

  I uninstalled the J4680 printer and all HP programs associate. Start - all programs showed no HP at all. I installed the full version of HP J4680 programs and everything works fine. The wireless connection was automatically created during the installation and the scan works very well.

  Thank you for ME

• Adobe Muse Site in preview mode before but does not work when published

  Hello

  I have an Adobe Muse site that works perfectly when it is in preview with any browser mode, but does not at all appear when it is published on BusinessCatalyst.

  Someone has to meet this problem before?

  Here is my test link: http://wss001.businesscatalyst.com/

  Hey guys,.

  Adobe support helped me to find the problem.  Content tags we put on the block of text doesn't jive with catalyst for business.  Remove the content tags contributed to publish the site.

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Error message: Picture.library.ms no longer works. Tried to remove the library as suggested but does not ask for confirmation delete a few deletions without asking for confirmation.

  Error message: Picture.library.ms no longer works. Tried to remove the library as suggested but does not ask for confirmation delete a few deletions without asking for confirmation. Also don't undersatnd how then restore you the other context using the trash of the library? Don't understand that your instructions please the ventilation in portions of beginner. Is - this recurring issue is sought in microsoft?

  Hello

  You solved the problem with the photo library?

  You have been informed that the question about the image library is fixed in the next thread.

  http://answers.Microsoft.com/en-us/IE/Forum/ie11-iewindows8_1/you-tube-videos-do-not-play-after-updating-to/ce05a70a-3548-44e7-b5ed-2602df641dca

  If you are now facing problems with videos from YouTube on Internet Explorer 11, try the steps in the above thread link and check.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

  When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

  Please go to the location of your Lightroom Catalog, and there you will see the folder for Lightroom Catalog Previews.Lrdata