Unable to connect to Linksys WRT120N router using Notebook Pavilion dv1000

Similar Questions

• Qosmio X 300-13 G - unable to connect to the WLan router using Project N

  Hello
  I purchased a Qosmio X 300-13 g (the only one available in Portugal :/) and I tried to connect it to a network wirelles N, but I always get an error message):
  Windows could not connect because the defenitions of the router are different from your...

  Well you know why? I tried with several routers, and it is always the same...

  TKS

  Concerning

  Is your WLan router supports 802.11 N draft standard?

  Did you choose N draft standard on your WLan router?

• Unable to connect to an instance by using EM but properly connect with SQL * more

  Hello
  
  I followed the following steps (from the document s/n 2 days):
  
  1. I created a model (including the database) to an instance named "orcl" using DBCA, before we proceed to create the model, DBCA informed me that the Forum might be stopped, I told him to go ahead.
  
  2. the model has been successfully created.
  
  3. I am now unable to connect to the instance orcl using EM, but I can connect to this instance without any problem using SQL * more.
  
  Question: Why am I not able to connect to the instance by using EM? and what should I do to fix this?
  
  Thank you very much for your help,
  
  John.
  
  PS: in case it may be useful, the listener tnsnames and Sqlnet files follow:
  

  # listener.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = CLRExtProc)
        (ORACLE_HOME = E:\Oracle\product\11.2.0\dbhome_1)
        (PROGRAM = extproc)
        (ENVS = "EXTPROC_DLLS=ONLY:E:\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
        (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      )
    )
  
  ADR_BASE_LISTENER = E:\Oracle

  # tnsnames.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  DBCA =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = dbca.localsite.com)
      )
    )
  
  ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      )
      (CONNECT_DATA =
        (SID = CLRExtProc)
        (PRESENTATION = RO)
      )
    )
  
  LISTENER_ORCL =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
  
  
  ORCL =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = ORACLE2DAY1)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME = orcl.localsite.com)
      )
    )

  # sqlnet.ora Network Configuration File: E:\Oracle\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
  # Generated by Oracle configuration tools.
  
  # This file is actually generated by netca. But if customers choose to 
  # install "Software Only", this file wont exist and without the native 
  # authentication, they will not be able to connect to the database on NT.
  
  SQLNET.AUTHENTICATION_SERVICES= (NTS)
  
  NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)

  I think you change some configuration of your system as domain/IP address/host name.
  You need

  set ORACLE_SID=orcl
  emca -deconfig dbcontrol db -repos drop
  emca -config dbcontrol db -repos create
  

  then after result

• Unable to connect TV to new router

  KDL-46HX820. In the process of setting up the TV, I properly connected by Wi - Fi on my router Linksys Valet Wi - Fi. Later, I replaced this router with a Linksys E4200. The Linksys router has generated its own network ID and password. I tried to connect the TV to the new wireless router using the WPS process, but the TV will not connect.

  What should I do to get the TV to connect to a new wireless router with a new network ID and password?

  Thanks for any help.

  Try to assign a static IP address for your TV. First of all, you need to find the address of the gateway of your wireless device. In a computer that is connected to your wireless network, you can open a command prompt window (start - run - cmd) and type ipconfig. This will give you the address of the gateway (for ex: 178.152.1.1)

  Then go to the TV and go through the configuration of the network (wireless).
  When you configure IP address and proxy, choose (custom instead of Auto).

  Then proceed as follows:
  IP address: 178.152.1.15
  Address of subnet 255.255.255.0
  Default gateway 178.152.1.1
  Primary DNS 8.8.8.8
  Secondary DNS 4.2.2.2

  Note that the IP address and default gateway is the same as your gateway address you got from the computer except the last figure of the IP address.

  Then browse the rest of the setp upwards and who need to connect to your wireless router

• Unable to connect to the wireless router. No ip address

  Recently, I plugged a Linksys E2000 router to connect two computers for internet access. Computer has access. 2nd computer cannot obtain an ip address. using windows xp sp 3. Technical support was no help.

  Hello

  As a first step put the computer near the router and start with the security off the coast.
  When it works, take it back to the final spot. If it stops then working, then you have a problem of distance.

  In general

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• P1102w "unable to communicate with any wireless router using the provided SSID"

  Hi all, apologies if there is an answer to that somewhere, I took a look, and several people have had something similar, but without a clear resolution.

  I got a job p1102w successfully for about 2 years now and this week he suddenly won't print wireless. No recent changes to the network, no change to the printer, no changes to the computer.

  No luck with simple things so I reinstalled the printer (it works via USB), but when I get to the wireless network configuration steps I encountered a problem.  Automatically scan for wireless networks detects my home network, but by selecting translates "unable to communicate with any access point or wireless router using the provided SSID. The same error message occurs when you try to connect to a network wireless of my neighbors.

  Any ideas would be very appreciated.

  Isaac

  At this point, I would say that there is a problem with the card wireless in the printer.  Do you know if this printer is under warranty?

  www.HP.com/go/warrantycheck

  If your printer is still under warranty, then I suggest call HP for Technical Support on this printer.

  Contact HP worldwide | HP

  Jason

• Unable to connect to the netgear router, it says failed to connect check connection

  Original title: netgear router

  Im trying to connect to my netgear router a TI repeat check connection failed to connect, but I can go on the internet. He began to do after I changed the channel on the router one moment I can reconnect you to fix. or go to the web page on the internet to solve if someone could help me that would be great.

  Hello

  1. What is the model No. the Netgear router?
  2 have you tried to login using the different browser and check?

  Check out the following link and check if you can access the router page.

  
  

  If you are unable to log on to your router

  http://KB.NETGEAR.com/app/answers/detail/A_ID/1097/~/if-you-cannot-log-on-to-your-router

  Alternatively, you can contact Netgear support for more details:

  http://forum1.NETGEAR.com/

  If you have any other questions, answer here and we will be happy to help you.

• Satellite A110-195 unable to connect to the WLan router

  Hello

  I have a wifi router and I have connected my laptop and it worked wery well but on low there is I could not conect to router but woudn't ip address pop up. Internet access was not.
  I am connected to the same router another device and it worked...

  Hello

  Believe me, there is no general solution, you must check all the settings of your operating system

  First of all that I recommend to check the parameters of the TCP/IP protocol if everything is settled automatically on.
  Then check if you are using encryption parameters right as standard (WEP, WPA, WPA2) encryption and the encryption key.

  It s also advised to reinstall or update the Wlan card driver

  If you used the windows own WLan configuration, I would recommend testing as Atheros Client utility or Intel ProSet Wlan client configuration utility. But it depends on the WLan card what client WLan configuration utility can be used

  concerning

• Satellite Pro 6100 - unable to connect to the WLAN router

  Hello

  I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro loaded.

  I can't connect to my wireless router. The switch is in the correct position.

  I want to change to XP using the key provided with the new laptop (dual OS) however I can't reformat using a XP disc at the start up or if I use the recovery cd (start with holding C and let go when he works up) it starts but displays 'specification drive not valid' three times and charges Win2000.

  Can someone advise how (or if!) Can I reformat I want?

  Any help will be greatly appreciated.
  See you soon.

  Are you sure that the wireless network adapter has been installed in the laptop?
  Check in Device Manager

  On some series WLan is optional. This means that the WLan card is not installed, but it is possible to install an and, consequently, the laptop contains the WLan switch.

• Unable to connect with the modem router e2500

  I have an old Speedstream 5100 modem hooked to my router e2500. Everything works well except if for any reason any my modem disconnects from the ISP I can not log in via the route to reconnect it. I need to connect a cable modem to computer direct run connect script then modem plug in router all is well again.

  Any ideas why the connection to the modem router is blocked?

  Thnaks,

  Al

  al_mathews wrote:

  My Speedstream has only an Ethernet connection so I did not know that he resembled a router for the local network. I changed the mode of bridge on the PPoE configuration on e2500 / Speedstream and reconnected to the ISP on the e2500 configuration screen. Who can solve the problem of reconnecting from now, it is run on the e2500.

  One thing I see now is since I left the modem IP set to 192.168.0.X can't do it all through the e2500. Is it because my DHCP in e2500 is configured with 192.168.1.X range IP modem is not covered in my network? If I directly connect Speedstream and place you IP 192.168.1.X will become visible on LAN?

  You are unable to access the modem even if you have a PPPoE connection. For PPPoE the E2500 will not need an IP address from the modem so it does not have DHCP on WAN port and so we never see. When you try to access the address of 192.168.0. * the E2500 it will route through the tunnel PPP to the ISP.

  If you connect your computer directly to the SpeedStream it should automatically get a DHCP address (assuming that the computer is still ongoing on the DHCP protocol and not with a static IP address and the SpeedStream does not automatically neutralize the DHCP server in Bridge mode). If you have configured a static IP address on the computer, you must change the IP address to an address of 192.168.0. *.

• With the help of Windows Vista Edition family and unable to connect to the Netgear router.

  No matter what patches I try, I still, I get a message error "settings saved on this computer for the network do not match the requirements of the network. Two other latops under Xp and Windows 7 connect perfectly.  The user called Geeksquad who told him it was the router. Replaced the router and the same issue. This default laptopp local only access point. Fix regedit for broadcast and Fixit file downloaded here have not solved the problem. Have you tried to push the direct connection button on the router, change the network connections settings... everything. Nothing works. Help, please! The user of this laptop is uber frustrated. I don't know what else to do.

  Geek Squad - use if you do not want necessarily fixed it - but you like overspending for no reason.

  Sounds like a bad driver/software.

  What is the wireless network device in the system in question (I hope that something like Intel...?)

  Is the latest software and drivers from the manufacturer of the device (don't not relying on Microsoft)?

  May need to remove all network components, reset it and install the latest drivers - and if you think Geek Squad would do that...  They could - if you get a child who loves really networking of their own things at home - but the odds are against it.

• Unable to connect to Internet through router WRT400N.

  I was able to connect to the Internet via the wireless, but not today it stopped working (without computers can connect if not just my wireless). I am able to connect to the Wireless router and update the parameters, I am able to connect to the wired router and change the settings. I am able to connect to the Internet by plugging directly into the modem and using this same cable I plug it into the router and then no internet. I don't know what to do anymore as I power cycled many times. Any help will be great. Also - all lights seem to be lighting up as usual.

  Who is your Internet service provider?

  You can access the Internet when you connect the computer directly to the modem. This means that the modem works fine.

  Connect the modem to the Internet port and the computer on the Ethernet port on the router.

  Open the router configuration page and check the settings of the router's Internet connection.

  Follow this link to configure the router with cable Internet service.

  Follow this link to configure the router with DSL Internet service.

• Unable to connect to my new router cable, my XP and Windows 7 machines

  Vista, wireless router Netgear, no link, please help

  No matter what I try, I can't connect to my new router cable, my XP and Windows 7 machines work fine but the Vista laptop are it. Have searched the web, looked at this site and the forums, but nothing does not jump and helps me solve the problem. I use a HP Pavilion DV9000 laptop, all service packs updates and so forth... any ideas?

  I suggest that you contact your ISP and get their help in setting up the Vista machine so it connects properly.  They know the right settings for the access provider, while we do not have and that there may be something else you need to do with Vista which is different of the other two systems (and hopefullly the ISP will also know and be able to talk you through the process).  I call my ISP all the time and they are VERY useful and have ALWAYS resolved any problems, I called (even if sometimes he had a visit from a technician).

  If the ISP Can ' t/don't/can't help you, then after coming back here and we'll try to go through it step by step, even if we cannot have all the information we need.  But I am sure that they will be able to help you more quickly and more effectively and with greater chances of success.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the ESX Server using PowerCLI 4.1.1

  I can't connect directly to an ESX host using PowerCLI 4.1.1

  C:\Program Files\VMware\Infrastructure\vSphere PowerCLI > Connect-VIServer esx001

  Connect-VIServer: 02/12/2010 12:04:38 Connect-VIServer unable to connect using the requested protocol.

  On line: 1 char: 17

  + Connect-VIServer < < < < esx001

  + CategoryInfo: ObjectNotFound: ( , ViServerConnectionException)

  + FullyQualifiedErrorId: Client20_ConnectivityServiceImpl_Reconnect_ProtocolError, VMware.VimAutomation.ViCore.Cmdlets.Commands.ConnectVIServer

  Connecting to vCenter works without problem.

  I also tried specifying the parameters of the - Protocol and - port, but without success.

  I am using .net 3.5 SP1 and PowerShell 2.0

  Anyone else has the same problems?

  -

  ---

  Arnim van Lieshout

  Blog: http://www.van-Lieshout.com

  Twitter: http://www.Twitter.com/avlieshout

  If you find this information useful, please give points to "correct" or "useful".

  Hi Arnim,

  Could you please check your ProxyPolicy settings (Get-PowerCLIConfiguration)? You can set the proxy for 'NoProxy' strategy and try to reconnect. I guess it could be the cause of the problem.

  Kind regards

  Dimitar

  -

• Unable to connect to an FTP site using Verizon hotspot on a Droid phone.

  to connect to an ftp site

  try to connect to an ftp site using access point on a droid verizon mobile and can not. check the advanced settings of the internet all the ftp boxes are checked in the security

  Check with the support of Droid.