Linksys router problem

Similar Questions

• I'm unable to access my Linksys router using Firefox browser version 9.0.1, but had no problem with knowledge is this normal or is there compatibility with Firefox problems?

  I am new to the Firefox browser and just tried to configure my Linksys router using Firefox and could not access my router, but had no problem with Internet Explorer. I was wondering is - this normal or there at - it set I can are wrong to use Firefox to fix my router?

  If you have the NoScript extension or other blocking JavaScript extensions (addons > Extensions), you must allow (or temporarily allow) the IP address of your router. Any particular setting should be held in Firefox itself.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Problem with access to the camera on the net via dsl modem and linksys router

  OK, I read all posts here on what to do in this case and think I have tried everything. I have an Actiontec dsl (verizon) and a v2 wrt110 router. I can see the camera locally, but not on the net. I had it hooked to another place but with cable service broadband with no problems.

  I think that the problem of my lie with ip addresses.

  Camera 192.168.0.115

  Router 192.168.0.1

  Modem 192.168.1.1

  The port forwards on the modem MUST be set to port forward to the IP Address of the Linksys router. It should be only the modem IP can see, so it's the only place you can move forward from the modem. What exactly is in this drop-down list in the config of the modem port forwarding?

  The problem is that there are two distinct here networks once you are inside your modem. There is a network between the modem and the router. Allthat is on it is the modem's ethernet interface and the port of the Internet router (or WAN). There is another network on the side the router as your PC's LAN, camera, etc. are on. All know the modem is how to get to the network to which it is directly connected to. While you could add a route staic on the modem to tell him how to get to this network, the modem must still know I have oprt route traffic to your camera to the router.

• Linksys router page does not render correctly

  recent upgrades of firefox do not allow a normal display of a linksys router page mode.

  missing text, missing items of choice.

  the items that appear are selectable, but it is a subset of a correctly rendered page.

  It worked correctly before,
  all the cleared cache.
  ABP and scriping turned off.

  more information, ABP was the culprit, deselection on page
  Fixed rendering problem.

  .. Never mind... (Emily Lietilla)

  Jr

• FF won't connect to Linksys router

  FF 4.0.1... WRT120N Linksys router. URL to the management page 192.168.0.1.

  Connection dialog box is presented. Enter nothing (correct!). Enter the correct password. All that happens is that the dialog box flashes and reappears.

  NOTE: Connection process works very well using Chrome or IE.

  Huge problem here guys.

  Click on the Firefox button, go to Options | Options | Advanced and in the general tab, remove the check mark from "tell web sites I don't want not to be the subject of a follow-up.

• Satellite M60-164 and the connection to the Linksys router

  Hello

  Ive had my Toshiba laptop a couple of weeks now and the stability of wireless is trying to grind on me...

  I had an older Toshiba laptop that I have connected to my linksys router with a PC card wireless of linksys... absolutely no problem at all with him for over a year...

  Since buying this one with built in the wireless, the only way I cn get the connectivity Toshiba dctor to detect the connection is too "no broadcast" disable my router, my neighbor commented that he could get on my network!

  Sometimes when the PC is start the 'LAN' and 'Wireless' icons on the departure to the high bar take ages to appear... and when they finally do a wireless has a yellow triangle with an exclamation mark in it... and the internet does not work...

  Sometimes it takes me 3 or 4 times to restart my computer and the router to recognize each other...

  It is certainly an issue on the laptop... I can always connect to each time without fail on the other laptop (who is now my wife) and I have a floor Office from PC using a netgear PCI Wireless crd and which connects no problem every time...

  I cn kind of deal with it, but its bothers me why I can't even detect the connection to the network during the broadcast is disabled (even when Ive found by scanning with seized me the name of the network)...

  Ive tried linksys... but couldn't find anything, and as I say... my other PC works smoothly to al...

  Hello

  Deactivation of an access point function just broadcast SSID prevents broadcast the SSID.
  If you want to know more on wireless technology or the settings of the router, please check this useful site:
  http://Forumz.TomsHardware.com/Network/FAQ-ftopict20497.html#46

  But don't know about the card installed in this unit wireless network. It s a 2200BG Intel wlan card and if you will look on other assignments, there are many questions about this wlan card.
  Usually the wlan card driver update will solve some problem of connectivity and also turning off the power save mode in the properties of the wlan card.

  Please also see this section:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11445

• Unable to connect to the Internet through a Linksys router Vista Satellite L300

  Hello guys,.

  I hope someone can help me.

  I tried to configure connect wireless to the internet using my new laptop. I used the wizard to set up the connection and he found my linksys router and it binds with it very well. Then when he tries to test the internet connection, it will just say error. I have not had this problem before and I'm a bit confused. When I thrn try to access a web page, I just get "Page cannot be displayed". I have troubleshooted and tried to reset the router, cable modem and laptop with no luck.

  Please could someone help with this?

  Any help would be greatly appreciated.

  Thank you

  Chris

  Hello

  To my knowledge, the router first with the data from your ISP.

  If done correctly, you should be able to connect to internet via LAN cable.
  Did you check that first? Do this!

  So if you can properly connect to internet via LAN cable, I would recommend set up the WiFi network on the router.
  There is a will to put the SSID (name of the WLan) encryption settings, MAC address filtering, firewall, etc.

  If these settings have been configured correctly, then you could try to configure WLan settings on your laptop!

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Linksys - router bridge - E8350 path not found network

  Dear community of Linksys,

  I recently bought a Linksys E8350 router, to replace the old AP in my network domestic.

  To make the installer of my clear network, I did a little diagram:

  

  So, as you can see, at the top left is the router/modem provided by my internet provider (Telenet, Belgium).

  I have a wired connection in my room, where I have my desktop and NAS connected computer. I also plugged the

  Linksys E8350 that is configured in Bridge mode. My laptop is connected wireless to the E8350.

  On the E8350, I disabled DHCP and NAT and gave him a static IP outside the range of my other router.

  My problem:

  When I go to the network through windows file Explorer, I can see my desktop from my laptop and vice versa.

  But when I double click to access one of them, I get the error message "network path not found".

  Connection via start > \\Computer-name gives the same error.

  Since my laptop or my desktop, I can see my NAS on the network. I have internet on all my devices:

  My office through internet cable connection, my laptop has wireless internet connection trough

  and I can evaluate my NAS from the internet.

  When I remove the E8350 entirely from my network and connect my laptop a hollow wired connection.

  everything works fine. I can see all the devices on the network, connect to my NAS and share files between computers.

  Things I tried already:

  -My PC and laptop are both in a 'private network '.

  -J' disabled my firewall

  -Everything is activated in the menu "sharing advanced settings."

  -J' tried to connect the E8350 to the switch via the Ethernet or WLAN port, nor to solve the problem

  -J' tried to change the NETBIOS settings

  -I don't have your antivirus software that might interfere with something

  -J' updated the firmware on my linksys router to the latest version

  To be clear, the problem occurs when I put the E8350 in my network, otherwise everything works perfectly.

  I hope that I have provided some information decent on my problem, because I can't seem to figure it out myself.

  Thank you in advance.

  Pindox

  The topology of your network is effective from your diagram. With the E8350 in mode bridge in this topology is WAN is connected to the network switch.

  Many devices of bridge no hand NetBios address very well. In some cases, the best way to access the network through a bridge device resources is to use remote devices IP address instead of its computer\device network name.

  In Windows, you can drive old school card NAS records using the IP address of the Servers\NAS:

  PC command line:

  NET use s: \\192.168.0.3\my_nas_folder / persistent: Yes

• Installation with WRT310N wireless router problem

  I have currently an old model WRT54G Router installed wireless that works very well, but I need the WPS technology if I want to install a newer model WRT310N router. I used the installation cd supplied with the router, which has not seen any problem until I removed the old router and plugged in power in the new after connecting the anc ethernet cables to my cable modem. For some reason any the software wont recognize the new router so I can continue with the configuration of the installation. Since I plugged the new router in the same connections that I had had the old LInksys router connected to, I do not understand why and I can not proceed with the installation. I finally just reinstalled... connected., my old router and it works fine, but this isn't a solution for me.

  It might have something to do with the sequence to connect the different cables? I also tried to use 192.168.1.1. via my browser and could up the installation screens but it wont let me install the new router so that the old one is still in place and without the old one in place, I can not access the configuration on my desktop screens.

  I have my router in a closet with my... cable modem... .but the WRT54G worked fine for 2 years in the same cupboard and I also installed a Netgear N600 router as an alternative. is it installed fine until what happened to the point where he said the beach was too limited. .i guess work in the closet.  I guess I can buy a range extender to solve this problem, but I have no experience with those so im not sure if this will solve the problem. I prefer to get the Linksys WRT310N to work if possible.

  Thanks for any help you can provide.

  Thanks for the tips on how to handle this. Fortunately, I discovered later that the Linksys router, I bought on ebay, is apparently defective and it now resides in my trash. That said, I also realized with the help of a neighbor that my Kindle works with the good old Linksys router I used for 4 years or more. My problem was to not understand how to download books on the Kindle, even though I thought I did. So the problem is moot. Sorry I got worth this site with no problem.

• Linksys router WRT160N v3 warning disconnect and reconnect

  Hi all

  I know that you've all probably seen this thread before. (I know I have).

  I have a WRT160N v3 Linksys router and it keeps disconnect them and then reconnect. It disconnects wireless only. LAN still works fine.

  I tried many different methods to solve this problem, but none does not seem to work.

  I'm very disappointed with the quality of the product. He did everything since it was purchased. I personally would have sent in for repair, but others in my household would not have agreed to that.

  Additional features:

  -Firmware Version 3.0.03 (no later than as of July 2010)

  -A a SSID set to broadcast

  -A encryption WPA2-Personal

  -Mixed-mode network

  -Width of the channel set to Auto (20 MHz or 40 MHz)

  -Channel set to Auto

  Please help me solve this problem.

  Thank you in advanced.

  In my view, that it is corrected. I'm using dd - wrt firmware instead of ciscos

• Can someone help me to establish a wireless connection with an Android Cruz Tablet and a Linksys router?

  I have a Linksys WRT54G2 V1 and received a Velocity Cruz T301 and cannot figure out how to configure this wireless, I don't have the cd or the manual that is supposed to come with her. Any ideas on how to solve this problem? I've got Linksys plugged into my desktop ok, but when I try to access the installation page that says let him the empty user name and use admin as password should it take me to the installation site. That is not the case, that is to say invalid.

  Tablet turns on fine and shows different connections wireless with little locks on them. The 1st time I tried to set up a connection, he showed with others, but it has a lock on it and wants to know the password. He used the name of my computer not the Linksys.

  My computer is hooked on one of the 4 ports and says that I have excellent connections. There is a Linksys right below that, but he said connection is bad. It is not locked, but is not strong enough to get even on the tablet of the Cruz connection.

  Now I know why I've always had wired connections, cause it makes me crazy. If anyone can help I'd be very happy. If only I could get across to the top of page the things would be very different, I'm sure, but it is just let me access it. I tried 3 different browsers. My computer Windows Vista on a Dell vostro 220 desktop is connected to the Linksys router and works fine.

  Hello

  Please see the link below.

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  I suggest also please contact the manufacturer of the Tablet for assistance.

• Connectivity of the wireless router problem

  I have a Cisco's Linksys WRT160N wireless router.  After it is up and running, all my wireless devices work fine.  My sons Wii for my laptop, my wifes iPod Touch. But the strangest thing is happening.  I have problems connecting to the internet with my desktop computer that is hard wired to the linksys router.

  Often I can connect any... other times it's quite slow compared to when I plug my office directly to a cable modem.  Finally, sometimes certain aspects of the Web page will appear while others won't.

  Question: Is damaged?  Or is there something that I am missing.  You would think it would be right forweard enough... OH, I have also replaced the cables from the desktop to the router and have already done all the reboot that I care to do as well as redo the ip address in the part of the repair of my control panel.

  Any ideas?

  Access the Page of configuration of your router and lower the MTU size of the router to Auto/1500 to 1400.

• Windows Vista Home Basic Edition, Acer laptop wireless, Linksys router and connect Lexmark X 9350 wireless network.

  I'm tired... I tried everything I can think of, as well as everything I can find online in order to connect my printer Lexmark X 9350 WiFi for my Acer laptop which is connected to my home network wireless via my linksys router. At the same time, the printer has been set up through my existing wireless network and was working properly. (FOR A SINGLE DAY!) Then I got the bright idea to installNorton Anti Virus Security. Since then, my printer stopped working through the wireless network. It works as a stand-alone Copier and fax machine, but nothing of the printer.  I contacted Lexmark via online support, but their suggestions did not work or were so confusing that it would take a computer technology to interpret the instructions to correct the problem. I learned more about the Wi - Fi networks and computer by trial and error, I should be able to re - connect my printer the eyes bandaged.  Help, please... This problem is ongoing for weeks. Thank you so much in advance.

  Just a thought, as you say it started with Norton check his firewall exceptions:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring