Satellite M60-164 and the connection to the Linksys router

Similar Questions

• Satellite M60-164 and Toshiba bluetooth SD card3

  Hi, does anyone know if these two thingies will work together?

  Kind regards

  Daniel

  Hello Daniel

  Toshiba Europe page http://eu.computers.toshiba-europe.com under the heading Products > Accessories & Options, I discovered that Bluetooth SD Card 3 (PA3370U-1BTM) is compatible with Satellite M60-161.

  It is possible that you can use it too. You can try it. If there is a problem you can return anytime.

  Good luck!

• Satellite M60-164, sticking the numeric keypad

  Hello

  I wonder if anyone has experienced any sticky keys on the numeric keypad. I mean only to feel the resistance when you press the keys and they take the time to return to its normal position.
  No.... One looks like it might be food or drink has fallen on the pavement, but it is not the case.

  Thank you

  Nope.
  Given two M60-159 units, keyboard was replaced due to sensitivity of the keyboard problem (some characters are usually missing in the text...), none of the keys to self-retaining noticed on any of four keyboards. Replacement keyboards (revision 01) had a little different twist, but were not much better.
  Also saw two P100-219 units with a similar keyboard, no sticky keys is (keyboard sensitivity OK but not excellent as more old 3000 Toshiba).

  Question (please do not answer, I would really like to know): how is the sensitivity of your keyboard? Leave the characters when the quick entry?
  You may require a guarantee of replacement keyboard for this reason. Or better yet a replacement laptop, if all goes well they're out of M60s and you can get a P100... Personally, I do not change the computers because it takes too long, I just want them to fix the keyboard, but they seem to have given up (I even sent them keyboard replacement for analysis).

• SATELLITE M60-164: high slope whining

  I recently bought a TOSHIBA SATELLITE M60-164 and have noticed a subtle but incredibly annoying high sharp wail after startup. It is only in a very quiet environment.
  Suggestions that what this could be, I'm very tempted to return this laptop otherwise fantastic if the problem persists.

  Hello

  Can you please tell me if it works if the unit is connected to the supply current or battery?

  Have you noticed that on the first day of use? One of my friends has the same unit and no similar problem.

• Satellite M60-164 - BSOD during the windows loading screen

  On startup, I get the blue screen of death during the windows loading screen.

  I don't have a recovery cd, only a cd of OS (windows xp SP1a), which shows the option to repair but prompts then insert the recovery cd, how and where can I get one of these!

  No matter what help get a restore for Toshiba Satellite M60-164 Pro cd would be much appreciated!

  I think I know why you get a BSOD.
  You said that you have installed the Win XP SP1a.

  You must Win XP SP2!

  If you wish, you can create a CD Win XP SP2 clean! How? It's very easy. You need the tool freeware nLite (google for it and how to use it).

  Using the nLite application you could create a new XP CD and could include SP2 in this CD. You can then use this disk to start!

  By the way; The Toshiba recovery disc can be ordered from the ASP

• Toshiba satellite C655-S5128 and the sound goes in and out

  I have a toshiba satellite C655-S5128 and the sound goes in and out, I have to click the button on the lower right side speaker so that he works for a very short minutes the out again once and I have to repeat this if I want sound, iv tried all the troubleshoting there can anyone help?

  
  
  
  
  Please write me help * address email is removed from the privacy *.
  
  
  Thank you, Laurie

  Hi jthoodrat,

  Run the difficulty in this document to resolve common sound problems in Windows.

  Let us know if that helps.

• Satellite M60 - 164 need Win 7 driver for Player DVD Super Multi TS - 632B

  I have a portable satellite m60-164, I put windows 7 on it and windows does not recognize as a multi drive only a dvd - rw.
  can someone help me find a readers who works on Windows 7?

  PLEASE

  Hello

  I completely agree with Akuma. Windows 7 supports and include clean driver CD/DVD from Microsoft. If the optical CD/DVD drive should be automatically recognized by Win7.

  You see the ODD in Device Manager?
  If there is a yellow exclamation point, remove the ODD of Device Manager, and then restart the device after restarting again the laptop must find new device and should recognize this.

• Satellite M60 - 164 need AC adapter / CC

  I have a Satellite M60-164. I tried to buy a replacement adapter. I sent the part number to my provider and they tell me that it is discontinued. Anyone know an equivalent compatible adapter for Satellite M60-164... Thanks in advance for your help.

  Hi Tony,.

  I found this site on Google UK, and they list a 19V adapter suitable for the beach of the M60.

  http://www.laptopbits.co.UK/database_files/Toshiba_Laptop_AC_Adapters.htm

  Kind regards

• Satellite M60 - 164 get bluetooth to work

  I want to know if my pc has bluetooth on it, it seems she is in the device maneger but I can't make it work so I'm wandering if he is actuly on the phone it has a section in the control panel can anyone help please

  Hi mucklin terry

  I checked the Satellite M60-164 information and it seems that the Bluetooth is not available on this device.
  In this case, the only way to use Bluetooth technology is to use the PCMCIA Bluetooth card or the USB Bluetooth key.

• Satellite M60-164: very large external 320 GB HARD drive data Transmision

  I am the proud owner of a Toshiba Satellite M60 164, however, as I am downloading my wife camcorder videos and burn them to DVD, I rapibly to run out of hard drive space. Therefore, Saturday I purchsed a new Toshiba 320 GB USB external hard drive.

  After you have copied a number of videos captured on this new disc (about 20 min each for approximately 22Gb), I'm trying now copy back - one at a time - on the hard disc internal PC to burn them on DVD.

  Each of the 22 GB files takes up to 200 minutes (more than 3 hours!) to transfer back from the external hard drive to PC Hd - this seems incredibly long (I'm not impressed) - anyone any idea why this might be?

  Link is USB2. 1 GB of Ram on PC, 75 GB of disk space on PC internal Hd, 1.83 MHz piece, Norton Security running, if nothing else when attempting to transfer. Manual is useless, all this suggests is maybe 1 GB per dry 18 (at best) - a little difference between 396 seconds and 200 minutes (I have of course the NET would be faster!)

  The clues what is the problem?

  Pete

  Hello

  I guess that the Norton Security checks the files during the file transfer.
  Try turning off the Antivirus and Norton Security application if you want to copy the files.
  Check it out.
  The other possibility is that the drive HARD internal (5200 RPM) can't handle faster transmission of files.

• Satellite M60-164 has a Bluetooth?

  Fact the Satellite M60-164 were mounted hardware factory BT? The model No. East PSM60E - 02200 YEN.
  Thank you

  Hello

  Satellite M60-164 has no BT module on board. Each unit with BT has a stick of BT in the lower corner.

• How to access internet throug a firewall of the Linksys router?

  Recently, I went to the ADSL2 + Internet broadband.

  So bought router "CISCO Linksys WAG120N" as my hardware firewall (FortiGate60) had no any port to connect to ADSL.

  Now I am accessing internet throug the Linksys router above and do not use the firewall because I don't know how to configure the firewall to get access to the internet through the firewall of the router.

  My previous broadband service was directly connected to the WAN port on the firewall because it was compatible.

  Please help me to configure the firewall to access the internet from the router through the firewall.

  Thank you

  You must configure the WAG120N in Bridge mode and then configure your firewall to your (probably PPPoE) internet connection.

• Why anyone cannot access a device of storage attached to the Linksys router?

  I have a Western Digital external hard drive connected to my Linksys WRT610N router.  It worked fine for months now.  When I set up the external hard drive I created a group assigned privileges and then accounts created in the Linksys router that my whole family could use, and then I had all my family use accounts that I created on the Linksys, for access.

  Today, I decided to disable one of the accounts (I was worried as the computer that may have been infected, and I didn't want any virus/malware/EC which - have - you to infect file sharing.)  After you determine that the PC in question was virus-free, I then went back into the menu for storage and reactive Linksys administration account.

  Now, no one can access the file share?

  I give up; Why has this happened?

  Try this:

  -Disable all existing users.

  -Create a new use

  -Give the Admin rights

  -Power cycle the router

  Now, check...

• Request for Pin wireless connecting to a linksys router

  I want to heck the feature in windows vista that asking to enter a PIN instead of simply asking for my shared key of wireless wpa. Can someone tell me please how to disable this feature in windows vista.

  The possibility of using a PIN instead of a password for wireless is on the router, not the computer . Go to the Linksys configuration utility and disable the PIN requirement wireless has from there. This is general information about implementing a secure wireless network, which includes how to enter the configuration of the Linksys utility.

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  Excellent guide for setting up of a wireless network, with images -http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  MS - MVP - Elephant Boy computers - don't panic!

• Satellite M60: Little or no connectivity with the Modem cable

  Hello.

  I just got a Satellite M60, and I'll have limited connectivity or none when I try to connect to the internet via my Modem cable through the local network.
  OS is WIN XP Home SP2 PTG and I restored the original instalation, but nothing seems to work.
  Can anyone help?

  Thank you

  Hello

  What do you mean by limited connectivity?
  Did you check the system for viruses and worms?
  On the other hand, the active virus protection software can make your stream slowly or active. In addition, you check the cable lan for a few bows.

  Good bye