Linksys SFE2010

Similar Questions

• Change default SFE2010 VLAN

  I have a SFE2010 I would use two SFE2000P with SFE1000P 8. The SFE2010 comes with a default VLAN 1 while the SFE2000P and SFE1000P have default values of 100. I would like to replace the default VLAN SFE2010 to 100 to match the others. I tried to do this via the console, it says "done" but it simply changes it to 1 if I go back to the "Default configuration of VLAN" menu item.

  I tried to save the config startup and configuration of backup after the change and restart the switch. Same results.

  What I'm missing here? How to actually change to 100?

  Hi kjacobson,.

  SFE2000P and SFE1000P has initially been made to support the Linksys One phone system and as such had a configuration of VLAN and QOS fixed.

  Never been able to bypass this configuration by default, needed to work with it, as the intended VLAN firmware especially SFE version1 ID's and you couldn't really change it.  I thought it was weird to have a vlan untagged 100 to native or by default VLAN, but the VLAN ID is not propagated because there is no label.

  Times have changed and it will soon be the software.  Since the native or VLAN by default don't is not marked, with different native VLAN ID is boring and confusing, but not unattainable.

  Until Version 2 of the code out of SFE2000 and SFE2000P SFE1000P, I can only apologize for the inconvenience, and I was myself and just had to work with her.  This discomfort will go away I hope soon with a new version of the code. I have no fixed date for this version of the code :(

  Best regards, Dave

• With the help of TC as a bridge between the Linksys router.  TC will be connected by a cable ethernet to another building.  Will this work? Help.

  Need to get wireless to my workshop about 70 feet from the House.  Linksys router connect to the Hughes Net modem uses.  I have a new time Capsule I would like to set up in the workshop.  I have an ethernet cable from my house to the workshop.  (Had bad lighting storm last week and knocked out two Linksys routers.  TVs all otherwise not serious!  Need help, TC inlays.

  Connect the ethernet to the WAN port on the TC and just run the configuration wizard utility airport... it should automatically configure the TC correctly... Have you already tried that and it didn't... If so the TC attached as well during the storm because it can damage the ethernet ports.

• How is it that we still have the ssl_error_weak_server_cert_key error when you try to access the Linksys routers?

  We had this error pop up in FF 32 and 33 and 34 FF fixed it. How is it that since FF38.1 returned error and even now with 40 FF, the error is still there. Why is no longer an exception option Add to these routers? Even some of the most recent always give this error.

  You probably cannot update the key, but you can complain to Linksys.

• How to connect my Airport Express to Linksys WAG120N?

  I recently bought a Linksys WAG120 + 2 Modem Router ADSL. I have a connection broadband ADSL with PPPoE. I want to use WAG120 as modem only & Airport Express as main WI - FI router. Please help how to configure my modem and Airport Express?

  Executer run through the installation wizard, select bridge mode.

  It should be a simple option available from the installation... but I don't have to say.

  http://downloads.Linksys.com/downloads/Userguide/1224645029534/WAG120N-160Nv2-32 0N-EMEA_UG_C-WEB, 0.pdf

  Bridge is explained in the manual... always an interesting place to look for instructions.

  The express for PPPOE in the Internet tab of configuration... Note that this is not reliable for many people. Your ISP MUST also support PPPOE.

  The network tab is then configured with DHCP and NAT. the rest is pretty much automatic.

• Linksys router page does not render correctly

  recent upgrades of firefox do not allow a normal display of a linksys router page mode.

  missing text, missing items of choice.

  the items that appear are selectable, but it is a subset of a correctly rendered page.

  It worked correctly before,
  all the cleared cache.
  ABP and scriping turned off.

  more information, ABP was the culprit, deselection on page
  Fixed rendering problem.

  .. Never mind... (Emily Lietilla)

  Jr

• Firefox and a Linksys router

  I run a bed and breakfast. I have a router Linksys (EA6200). Thanks to the support of Linksys, I found solutions to help the login page appear for my guests in IE and Google Chrome. Unfortunately, it is still not load in Firefox.

  I want this to work just like when you go to a café or restaurant of fast food with the WiFi. I don't want to tell clients that they must do this or that if it is really simple to do.

  Any reason, why this does not work in Firefox and how to fix?

  jsher2000, you're awesome, but I guess you've heard this before. Bypass cache (Ctrl + Shift + R) didn't work, but put them in another URL worked like a charm.

  PROBLEM SOLVED!

• Why consult is no longer streaming video of my camera wireless LINKSYS WVC80N using Firefox?

  A month or two ago I could watch the video from my camera wireless of LINKSYS WVC80N on Firefox, but now I just get a upper and lower bar with no video between them. The firmware on my camera and router have not changed and their parameters are the same when he was streaming ok. Firefox has modified several times auto since it worked, but I don't know which was the version, while it worked. Any ideas on how to solve this problem would be greatly appreciated.

  have you tried running beta of firefox 22 yet? It works on os x too...

• On linksys WRT - 1900AC V2 Time machine

  SE your know that Linksys WRT-1900ac can use the time machine function? another post said that can not use time machine to back up! Is it really?

  Thank you!

  Yes, really. the linksys is a wifi router only, and has no hard disk attached. I guess that you can attach a hard drive somewhere (if possible) and put on with the Time machine backup, but this is neither here nor there.  For me, I bought a time capsule airport - very reliable and very easy to install and to use, does the job quietly and well. He also recommended to have a backup of some sort finally... just for security reasons

  JB

• more a bug than a firefox issue report No 10 mangages https with linksys routers

  Linksys cannot eat Conect via https to a router
  That is to say athentacates fine firefox worked with version 9

  I followed the instructions in the link of SafeBrowser concerning support for MS ( http://support.microsoft.com/kb/2643584 ) newsletter and applied FixIt 50824.

  IE9 now works correctly. Firefox and Chrome are not.

• I'm unable to access my Linksys router using Firefox browser version 9.0.1, but had no problem with knowledge is this normal or is there compatibility with Firefox problems?

  I am new to the Firefox browser and just tried to configure my Linksys router using Firefox and could not access my router, but had no problem with Internet Explorer. I was wondering is - this normal or there at - it set I can are wrong to use Firefox to fix my router?

  If you have the NoScript extension or other blocking JavaScript extensions (addons > Extensions), you must allow (or temporarily allow) the IP address of your router. Any particular setting should be held in Firefox itself.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• FF won't connect to Linksys router

  FF 4.0.1... WRT120N Linksys router. URL to the management page 192.168.0.1.

  Connection dialog box is presented. Enter nothing (correct!). Enter the correct password. All that happens is that the dialog box flashes and reappears.

  NOTE: Connection process works very well using Chrome or IE.

  Huge problem here guys.

  Click on the Firefox button, go to Options | Options | Advanced and in the general tab, remove the check mark from "tell web sites I don't want not to be the subject of a follow-up.

• How can I configure Libretto U100 internal wifi to connect to Linksys

  I Libretto U100, and I am not able to connect or to search or connect to the WiFi network. I use Linksys Wireless-G (ADSL router modem switch with 4 ports).

  Thank you
  MShamsan

  Sorry to ask, but have you been able to connect any other laptops in this Linksys router? and your laptop sees other wireless devices?

  The booklet is a card WiFi B/G, so there is no reason why it would not connect?

  Is your Linksys in a default configuration? because if it's Setup, with say the hidden SSID and encryption defined, there is no way you will connect to it unless you manually set the booklet.

  More information would be useful

• Satellite P70 - A - 07 T 040 - connection to LInksys 1900AC speed

  The specification for the P70 - A indicates a transmission speed of 300bps. Have you tried some drivers, but cannot raise the speed of 144 bps to 300bps, although an old PC on our network is automatically adjusted to 300bps when the Linksys has been implemented.

  Is there a specific Toshiba driver for this?

  > Lists of the specification for the P70 - has a transmission speed of 300bps

  You mean the wireless network and WiFi card?

  First of all various satellite P70 - A portable models support different hardware specifications. This means that the different WLan modules were built in the notebooks.

  It s I knew not which module Wlan has integrated this unit but its not very difficult to verify. You will find Wlan card details in the Device Manager.

  Second, most of the modules supports various standards Wi - Fi 802.11 B/G/N
  Each standard supports different connection speed.

  802 11 B 2.4 Ghz supports 1-11Mbit/s
  802.11 G 2.4 Ghz supports 6-54 Mbps
  802.11 N 2.4 Ghz or 5 GHz supports 72-600Mbit/s

  But beware: all these values are raw values!

  You should first check out what Wlan standard is used by the Wlan module.
  This can be checked in the Device Manager-> card Wlan-> properties-> Advanced tab.

  I guess that its already set to 802.11 N standard because you've reached 144Mbit/s
  So in this case you should also read this Wikipedia article on the 802.11 standards of N:
  http://en.Wikipedia.org/wiki/IEEE_802.11

  802.11n supports two wide channels: 20 MHz and 40 MHz.
  20 MHz supports 144.4 Mbit/s
  40 MHz supports 300 Mbps

• Compaq 5008 MT, fresh install win7 pro. PCI slot does not recognize the card wireless linksys, (wmp54g)

  My hard drive doesn't have the other day (western digital 320g).  He left me stranded, I installed a new HD, installed windows 7 pro costs.  Everything seems to work except for my linksys PCI slot wireless network card.  In my control panel, I have a yellow on my network controller in the properties of the material.

  All ideas, it won't let me add a driver?

  I installed windows with the card in the slot, which shouldn't matter should it?

  Averagejoe56553 wrote: windows 7 pro 64 bit, version 4 linksys

  Hello Averagejoe56553, it seems that Linksys does not provide drivers for Windows 7 x 64. Wireless chipset used in the Linksys Card made by Ralink and they throw a few Windows 7 x 64 drivers for this card.

  Here a link to Ralink is where you will find all the Ralink drivers.

  Here is a link where the drivers for your card.

  You will be asked to enter your name and e-mail address to access the doe to download these drivers.

  If the one I linked to does not install or work on your Windows 7 x 64 system, try another version on the first linked page.