Linksys WRT1900AC dead after the weekend

Similar Questions

• Linksys WRT1900ACS shows all the ports that are open and firmware restore.

  Hi bought a new Linksys WRT1900ACS and has the following questions.

  a. How can I determine whether version hardware version 1 og 2.

  b. making a portscanning on the Linksys WRT1900ACS for the internet I found that several ports where free.

  When I went into the Setup, I get only portforwarded 20/21.

  I could access my internet QNAPS 3 + more.

  But the router WRT1900ACS didn t show this when it has been planned, why?

  I now that the QNAP may change the port settings, but I do not have "done this or asked for it", but why it does not appear

  When I log in the WRT1900ACS via Smart Wi - Fi.

  (can not see all 3 QNAPS when I use my linksys EA6500 router.)

  c. After you have determined the B. I tried to Flash the firmware with the firmware OPENWRT. But now I can access the WRT1900ACS and the WiFi is not charged more. The normal router works. How do I get:

  D: flash the original firmaware (via lan)

  e: what OPENWRT firmware has GUI and can be recommended for WRT1900ACS and where to download?

  f. are there links to og to youtube which is very imnformative to do this?

  Thank you

  John

  [email protected] wrote:

  Hi bought a new Linksys WRT1900ACS and has the following questions.

  a. How can I determine whether version hardware version 1 og 2.

  Thank you

  John

  This must appear on the label of the product below.

• MS 2100 "dead" after the restart - only 2 lights "

  I rebooted my Satellite Pro 2100 and waited for it to power upward again. But it does not. It is fairly new, 1 year old. I pressed the button, but the machine stays dead. The more good led-light will turn on for a second and then turns off again. No sound from HD, no fan noise, nothing.

  I read in the forums on usenet that there might be something to do with the battery charging too long. But if it's real: the laptop must be able to operate without a battery for a power adapter? Or am I wrong?

  Thanks in advance for your answer!

  Hello
  you absolute correct! The laptop should run just with adapter connected.

  You can just test one thing.

  Remove the main battery and the AC adapter.
  Wait a minute just reconnect the adapter to the laptop and try to turn on the machine.

  The problem persists?

  As you said the laptop is just over a year, and if the problem persists, try the best way for this problem is to give the laptop from Toshiba Service centre for a check.

  Good bye

• Google Drive no longer works on Surface RT after the weekend update.

  I can unstall the update of the weekend that broke the Google Reader.

  I use my work Surface and cannot migrate to SkyDrive as the School Board has taken this decision.

  The Surface will work properly with the 'world' to be successful.

  I found that Windows Phone still works with Google Drive.

  Why Surface RT cannot do the same?

  When is Microsoft going to solve this problem?

  You can move in now shift + ctrl and left click.

  I want that this problem as well.

• Satellite L755D-S5204 dead after the fresh install of Win XP

  Regarding this Toshiba lab Top I bought the last weak.
  Model: Satellite * L755D-S5204 *, I had to install a new system (Windows XP 32-bit SP3)

  But there is a major problem; who is that definitions of drivers that DVD was not included with the lab on it and my Lab Top is currently dead.

  I'd be grateful if you provide me with a download link for the drivers DvD definitions.

  Can you please be more specific?
  What you're looking for?
  Do you need drivers Win XP or what?

  The Satellite L755D-S5204 seems WE notebook series and Win XP drivers are not available for this new series.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• XP systems cannot connect to internet after updates applied over the weekend (10/29 - 10/31)

  Systems: Dell Optiplex 740

  Operating system: XP Pro, SP3.  Connected to the AD network.

  Antivirus: Symantec Endpoint Protection

  : Systems imaged with Symantec Solution Suite 2.5, running ghost console client, run office 2007, LotusNotes email client, Adobe Acrobat 9.0 pro, no odd/specialty software.

  The following hotfixes have been automatically downloaded and installed this weekend.  (The domain value autoinstall updated policy)

  KB2296011 KB2345886 KB2360937, KB2378111, KB2387149, KB982132, KB979687, KB981957, KB2279986, KB2360131, KB2418241

  System ran perfectly before the updates above being installed, applied.

  Symptoms:

  1 - log on to the network, sometimes connection takes hours (2-3) to load a new or existing profile.  This seems random, as some profiles allow an immediate connection.
  2 - the system does not stop.  Even if gone for 16 hours, it never completes the task.
  3. can access local systems within the network through a UNC path, but very very slow.  Can ping anywhere, ping also solves dns IP (google.com, yahoo.com, etc.).  Can't access a Web page than IE.  Curiously, install google chrome or any other browser allows web access - never through IE, however.
  4. can not view or change the connections of the network adapters.  Hangs and never completed the task.
  5 USB devices not already connected to the workstation before above patches do not load/install, even if they were previously on this system.  For example, a USB key that worked Friday does today.
  6 - when the screensaver activates, system is not sometimes recover.
  7 - safe mode with networking will run without problem.  IE works, connects to the web.  No hardware problem, no connectivity issues.

  Here is what I have tried, in all possible and combination orders:

  1. remove each patch listed above.
  2. remove each patch listed above AND any referenced patch.
  3 reinstall the SP3.
  4. remove each piece of software other than the operating system.
  5 - disable all services that do not work in safe mode with network.
  6. Remove and reinstall the NIC drivers.

  I am at a loss.  I have an image before the explosion, and it works perfectly until these patches are downloaded and installed.  After the restart, bam.  So, I can easily reproduce the problem.

  Does anyone have any ideas or clues as to what to try?

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If tweaking your third-party provider (i.e., Symantec Endpoint Protection) the firewall settings don't help, try the following:

  1. disable all components Symantec Endpoint AND THEN make sure that the Windows Firewall is enabled.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #5 below.

  2 Uninstall "a security update for Windows Internet Explorer 7 (or 8) (2360131)" [or "for Windows XP security update (2360131)" If IE6] via Add/Remove Programs (make sure the box show updates at the top right) and reboot.

  3 d - c #1 above.

  4. open Internet Explorer (only) to http://windowsupdate.microsoft.com . Select CUSTOM and scan | Install all security critical updates available (e.g., KB2360131).  If an update of root certificates is listed (possibly in the category of the optional software updates on the left side of the scan results window), install it to enjoy enhanced Internet Explorer security.

  5 reboot & make sure that all in #1 above is activated again and, if necessary, disable the Windows Firewall and enable your third-party firewall.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  XP key wep changes for new router linksys after the connection. you need to reinstall the WEP every time you start from the top.

  Hello

  Let us perform the steps below and check out them.

  a. click "Start," "Control Panel", then "Add or Remove Programs". In the box "Currently installed programs", find the name of your wireless router. Click on the name of the software, and then click 'remove '. Click 'Yes' when prompted to confirm.
  b. click "Start" then "run". Type "Services.msc" and click "OK". Select 'Wireless Zero Configuration'. Click on 'start '.
  c. click 'Action', 'properties '. In the drop-down menu "Startup Type", click on the arrow and select 'Automatic' to assign the commissioning of automatic Wireless Auto Configuration. Click on 'OK '.
  d. restart your computer.
  e. right click on "Wireless connections" icon Select "View available wireless connections." Click on "change the order of preferred networks. Select the name of your network, and then click "Properties". Erase the old key and enter a new. Click the checkbox next to "Automatically use that key." Click on 'OK '.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Router Linksys WRT1900ac - unable to access the USB drive shared on the WiFi 5 GHz

  Hello

  I have a strange problem. I use my Linksys WRT1900ac for almost a year and it works great. There is a USB hard drive plugged into it and I have no problem to access the data. I brought a new desktop computer that is compatible 5 GHz. All my other devices are connected trought 2.4 GHz.

  When I connect my computer to the 5 GHz WiFi network, I have access to the internet and any other player shared the router. It I connect it to the network 2, 4 GHz, it works. The 2.4 and 5 GHZ networks have the same configuration. The only difference is the SSID. I added 5g at the ent of the 5 GHz one.

  I really don't understand why I can't access the shared drive of the 5 GHz network and it works on the 2, 4 GHz. I forgot something?

  Thanks to anyone who can help!

  It could be that when you connect to the 5 GHz network, your PC is set to public and therefore discovery network is disabled, then you are not able to see the drive.  Just throw it out there.

• Installing dell aio 944 on vista and linksys printserver wpsm54g, installation after the installation wizard

  After installing linksys printserver wpsm54g with my printer dell aio 944 on vista, vista said it still need the installation driver for wireless printserver even if I finished the whole plant without problem.

  1. install the linksys with the cd print server

  2. after the computer restarts, reinstall your printer driver by downloading from the dell web site and use the driver installation network. 3. restart your computer again and use the printserver utility and click on log in your lower right corner of the utility on the start bar. You are now finished! PM me if you need help.

• After the latest updates from Microsoft, my Internet Backgammon supplied with Windows 7 no longer works. It is a dead link and the game opens same. That's happened?

  I like to play trump stings on Internet and Internet Backgammon that's installed with Windows 7, Home Premium edition.  However, after the automatic updates installed yesterday, I noticed that the link to play the Internet Backgammon is no longer works.  It's just a dead link.  I can click on it, but nothing happens.  Not even an ounce of trying to open.  It's just 'died '.  I can still play trump stings on the Internet and I have no trouble to access the internet, so I wonder if this is just a small problem or do you have Microsoft remove Internet Backgammon as one of its windows games?  Note, this is Internet Backgammon that is installed on the computer, in the folder games - it is NOT the version of backgammon on MSN that you actually go to the internet and to play.  I am referring to the one in the Games folder, which is installed with Windows 7.  I play this game almost every day, so I hope that it will be restored.  I wish there was a way to contact Microsoft about this, but there isn't and they charge, then...

  Hi Kentuckywoman,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems with the game of Backgammon Internet. I'll be happy to help you in this problem.

  -What are the updates installed recently?

  Method 1: I suggest you to perform system restore and see if it helps.

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Method 2: If the problem persists, I suggest to uninstall and reinstall the game, then check if the problem persists.

  Step 1: Uninstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, Internet games and uncheck the brand in front of Backgammon Internet.

  (d) to restart the computer.

  Step 2: Reinstall the game:

  (a) go to Start and in the search type' features on or off Windows activate'.»»

  (b) click on "turn Windows features on or off". ""

  (c) develop the games, games on the Internet andcheck the mark in front ofBackgammon Internet.

  (d) to restart the computer.

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• iPhone & iPad with the same Apple ID, Wifi Dead after # 21 #, cannot call the specific number

  Hi guys, I really hope someone can help out me with this one. Long story short:

  After a week of vacation when we left our iPhone and iPad at home, my girlfriend's iPhone did get any cell phone signal when we came back, said network unavailable in the upper left corner, then we called Fido, the cell phone company, we use to try to resolve the problem. After trying to isolate the problem by changing my SIM card in the phone and SIM card in my phone, we saw that it was related to his SIM card.

  The key to reset cell phone network, has changed twice between the SIM card and after a good 24 hours, his phone was on the right track with the exception that it was not able to call me and only me. We get an error call failed. But she was able to receive calls from me and everyone else. Also, we were unable to set up the voicemail.

  As if the phone thought she was my line because of some flying over the passage of my SIM card in the phone...

  This is the first problem... That we called Fido again. After the usual troubleshooting stuff (reset the network settings, restore the device in iTunes, force the restart, eject and put in the SIM card) the Lady on the line calling in the phone app, the number "# 21 #". Then BAM! no more WiFi on his phone AND his iPad connected to the same Apple ID (not a network problem as all the other device not associated with this specific apple id are ok with this network and wifi iPad literally fall from the moment I hit that famous number) when I press on my wifi network in the list It behaves as it accepts the password, but all is not connect with the wheel spinning without end.

  Thus, employees of die cell phone are clueless and now she can't call me and she can't go on the internet with none of its aircraft. I tried a full restoration of his phone.

  Tomorrow I will try the iPad on my place of work to see if it can connect to the anther wifi network, pending:

  1-don't, anyone know what this # 21 # code is and how I can repair the damage he has done?

  2-is my SIM card remains on his good theory and if so, what can we do about it, if not then what could cause his phone to have a call to a number failed error in particular?

  Thanks in advance!

  Not sure about the theory of SIM card, but my guess is not... don't dwell settings. The SIM card must be "read" on every power up.

  The code in what she you punch is a mobile PHONE for call forwarding. She must have felt you have enabled I guess. It shouldn't be anything else stop call forwarding for his phone, if it was enabled.

  

• Dead laptop after the BIOS update. How can I restore original BIOS?

  Model: HP Pavilion m7-1015dx

  Original OS: Windows 7

  Current operating system: 64-bit Windows 8

  Problem:

  I tried to update the BIOS by using this file:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124651-1&cc=us&DLC=en&LC=en...

  Release: 2013-10-08
  File name: sp63801.exe [1/1, 6.56 M]
  Version F.29

  He gave me a Blue Screen of Death and the computer restarted. After the restart I only get a black screen, the fan comes on but there is no text and no way to access the BIOS, or the start menu.

  The led caps lock starts to blink twice, then stops for 1 ~ second then blinks twice again and again, indefinitely. This, according to HP, suggests a failure of the BIOS Corruption.

  What I tried:

  I do not have the HP recovery partition, so I tried to install the two update of UEFI BIOS HP SoftPAQ and HP UEFI support SoftPAQ environment on a FAT32 USB key named HP_TOOLS. I tried these tools separately, at the same time. I tried them with 3 different bios downloaded from this site. I hold the button windows and B, then turn on the computer. Nothing happens. I tried Fn and B, holding them for different periods, there are no beeps, no text on the screen, nothing. The led on the USB key blinks ten times at the beginning and then stops, then starts flashing caps lock. I tried to put the .bin file in different folders in the USB port, including the root, same result. No.SIG file is in the bios I downloaded.

  I am on mobile, excuse the errors. What Miss me?

  The message here by 'jayvastani' seems to work for many. The only thing different from his post a year ago would be to skip step 4. The rest should be all you need. Good luck!

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/how-to-use-the-HP-BIOS-update-UEFI-utility/m-p/2451463#M62022

• Linksys wrt1900ac - FTP address changing constanty - it drives me crazy!

  Hello!

  I enabled the FTP server. Everything works fine, BUT:

  How can I stop the router from its address of the FTP server constantly evolving? This is the first 79.222.11.35:21, then after a few days 79.222.18.68:21 and so on.

  Every day is different, which means that it is difficult to work with. This behavior is costing me a lot of nerves and brings a lot of trouble. I have stock for customers on the hard disk that is attached to the wrt1900 and I myself can not access data when I need it. The irony is - I bought the router due to its internal functioning of the FTP server, but now - it is unusable.

  No idea how can I stop this?

  concerning

  PS: I do not know if this is relevant: the hard drive is powered by USB and goes into standby mode if you do not - I like this behavior.

  kosmoface wrote:

  "The latest version of the firmware does not open the FTP server side WAN (Internet) of the router." The previous firmware was a security issue where when was activate the FTP all the files are available in the side Internet without security. »

  Please help me out here: This means that I can't basically give someone a direct link to its share on the FTP Server internal wrt1900ac? Which means I need a ftp server or NAS extra homemade for that?

  And I found this:

  Linksys WRT1900AC supports the DynDNS.orgproviders, TZO.com and NO - IP.com .

  Which means that I have TO use these providers and nothing else?

  Answers to your questions:

  1. This means that I can't basically give someone a direct link to its share on the FTP Server internal wrt1900ac?

  Yes all I KNOW with the Linksys Firmware Ver.1.1.8.161917 the FTP server does not allow access to the WAN (Internet)

  2. which means I need a ftp server or NAS extra homemade for that?

  You can flash OpenWRT McWRT and have access to the server FTP WAN on the WRT1900AC

  3. the Linksys WRT1900AC supports the DynDNS.org, TZO.com suppliers and NO - IP.com . Which means that I have TO use these providers and nothing else?

  Yes, but with OpenWRT McWRT you can use any provider.

  -----------------------------------------------------------------------------------------

  Read the Wiki home page if you decide to go forward with OpenWRT.

  https://github.com/Chadster766/McWRT

  https://github.com/Chadster766/McWRT/releases

  https://github.com/Chadster766/McWRT/wiki

  https://github.com/Chadster766/McWRT/issues

  Use the well known to start default settings. I recommend only change the SSID and passwords of wireless security until you become more familiar with it.

  Wireless information is not provided in the router, the user interface, but you can get that from the connected devices.

  If you need assistance with configurations of OpenWRT thanks for posting in the OpenWRT thread at the top of the forum.

• OfficeJet Pro 8600 Plus: cannot connect wirelessly between Officejet Pro 8600Plus and Linksys WRT1900AC wireless router

  Bought a new Linksys WRT1900AC wireless router.  Followed the steps of wireless configuration and connected successfully as verified by "results of analysis of the wireless network.  However, I am still unable to print/scan/fax.  Receive a message indicating that the printer is unable to connect to the server.

  Check the following:

  The blue light next to 'Wireless' suspends on printer.

  The INSTALLATION of the SCREEN ON the PRINTER (after the installation Wizzard wireless):

  IP address: 192.168.0.199

  Network name: golfer

  HostName: HPEB4DD8

  MAC: 444:1e:a1:e9:40:d7

  Direct Wireless: Off

  HP PRINT and SCAN DOCTOR:

  SSID is correct

  The signal strength is 'Excellent' @ 95

  Security-enabled = Yes

  Security type WPA2 =

  Connected = No

  Frequency = 2.4 Ghz

  No problem with previously connected D-Link DIR - 655 wireless router.

  Seems strange that any "passesses" by the results of the wireless network Test.  Yet, still unable to connect.

  Looking for any help.

  Thank you

  Mark

  Finally a resolution...

  I tried running an ePrint of New York telephone, and it worked, but still no luck wirelessly from the PC printing.

  He said that the WiFi was indeed working.  So, I did a search for new firmware and found that there was one in April of this year (2016).  Downloaded and took a chance on install.  To my amazement, it is actually installed on the printer without any connection "connected".  Who told me that there is an existing wireless link.

  Once the install is complete firmware, I tried to print a worksheet Excel from the PC, and it actually printed!  I have to assume there was something in the formware upgrade which allowed the router from LinkSys (WRT1900AC) to communicate fully and to work with the PC.  The router was published in 2014, so maybe it was.

  In any event, everything is in fully working again.

  Man y thanks to all who have shared their data entry.  I hope this could help someone with a similar problem in the future.

  Thanks again!

  Mark