Linksys WVC2300 + iPhone question

Similar Questions

• Memory full iPhone question 6 Plus 9.2.1

  Hello

  I have an iPhone 6 Plus. I get repeated messages saying that my storage is full. I go to settings / general / storage and use so I see the amount of memory I have available. It says 0 MB. I delete apps and then I see on the screen that I have 400/500 MB of available space.

  A few minutes later, I get the message that my storage is new, so I checked the screen and it say 0 MB... I proceed to clear another app, and minutes later, I get the same message. It is a question, no matter how I free space (deletion of videos, songs, apps). I get the message 'no memory'. I have iOS 9.2.1

  I restarted the iPhone using the home + power button until the Apple appears and nothing happens. Heats up the screen.

  You have some photos of iCloud activated?

  Settings > iCloud > Photos

  If it is enabled make sure that you optimize verified iPhone storage. You could try putting your whole library on the phone, and he keeps uploading new photos. You can also turn off this feature, but you will not be able to use your photos in your library.

• resolution iPhone question

  Hi, I have a few pages in the normal ipad resolution 1024 x 768, and I want to now change the resolution of the iphone 5/6

  couple questions:

  -is 1136 x 640 the correct resolution for that?

  -How can you usually / what is the best way to resize/change resolution on each article to this resolution?

  Thank you

  If you create a folio 1136 x 640, it will be displayed on the iPhone 5 and later, but not iPhone 4S and earlier versions.

  I think that the best approach is to use the functionality of other layouts in InDesign. But keep in mind that the layout of 1024 x 768 converted to a layout page 1136 x 640 would be probably too small for the iPhone. In order to maintain the same level of the SD, consider creating an alternative page layout that is the scale of 50% (568 x 384).

  See Digital Publishing Suite help | Creating content DPS for iPhones.

• substitute 6 s iPhone questions

  Hey guys. IM writing because I'm a little desperate right to know.

  I bought a new unit of the iphone 6 s about three months ago and it was really ok. good battery life (as a new phone should) and no hardware or software problem. But after these three months, a rare black spot appeared in the upper left corner, so I went to the official dealer store where I bought my phone and the phone has been kept to be inspected. OK, he was all right and they said they needed permission from apple to change my iphone for a new, because they change only the screens.

  After 5 days, I received my 'new' iphone 6 s. they replaced my phone with a new one, which was out of the box. It is a "replacement unit. This is a new, but without the box and materials as the pods from charger or ear. The other day, immediately I noticed something different: the battery life. The new iphone has a battery which drains much faster than my previous. Well, I went to the store again (it's a reseller. official store is not a store apple. I live in the Chile and we do not have apple Store) and they kept a second time to be inspected. After 5 days (yet), they said on the phone was ok and the battery its ok too, but the software (iOS) had some errors, so they formatted and updated my phone to iOS 9.3.4 (this was in 9.3.3). Nothing has changed. The battery continues to draw faster than my previous one and they are saying that limited my battery is fine.

  Now I need your help. I saved my backup of my previous phone and of course, I used this new unit, with or without the backup. I thought that maybe my apps have been draining the battery, so I tried to use my iphone as a new one, and there is no difference. The battery seems to work right (as apple says) and Yes, it works, but not as my previous. I can't watch a chapter 40 minutes or any long video without losing 40% or 50% of the battery. my old one could do this or even resist two days without charge. What can I do? I called apple and they say the same thing: "your battery seems ok. just configure it... and this and that and turn off notifications, put the auto brightness, turn off the updates of multitasking, etc etc and they can't answer without disabling something. I kept all my previous iphone configurations. Now, they said I should restore my iphone again. Why? Why would I do it again? the technician is already and they are trying to fool me with the 'restore again'.

  they gave me a phone that does not work like I did before. they can't even do a stress test to compare a new battery with mine. It's a basic thing they do and they do not! Nobody is helping me. IM wasting my time and money and I have no answer. Please, I really need help. I have now this seems a bit much, but this phone its expensive settle and calm like nothing happens. Please, I beg you. IM begging for a solution and a real help.

  Thanks for reading and have a nice day!

  All I could suggest is that remember you the Apple, let them know that he has absolutely nothing to do with the software since you already restored to factory settings and it made no difference. Be polite, but firm and continue to ask a supervisor if the person that you are talking about does not help.

• iPhone questions

  my iPhone is disabled and I need help getting back to my iPhone, I forgot my password.

  A simple google search found this article:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your...

• Linksys WRT1900 AC question

  First of all, I tried to download the latest firmware. He screwed up the router where it wouldn't even properly initialize due to this new firmware on the linksys site.  I was finally able to return to the original firmware. Is there a way to put the latest firmware on this router without spoiling him.

  My router is in the next room in a small apartment and sometimes I'll have abandoned signals where I can't even play videos on 2.5 ghz. and 5 GHz slower speed on the computer. Is that what I can do to speed up this router.  The cable modem is speed is 50 when I get only 20 and it sometimes looks like the connection drops. I looked online, and someone suggested to change channels. I don't know what I should change the channels on the up and down buttons.

  If all your devices are capable of 5 GHz and the range is pretty good by any means clear the 2.4. I want to start using the auto for the 5 GHz range and 20 only for the 2.4 if leave you it enabled. The 2.4 band is usually so crowded, that it does not much above 20 in any case. For the channels you can get an app that will show you what is already used. WiFi Analyzer on a smartphone works well for that purpose. try to stay on 1, 6 or 11 If you use the 2.4 and a channel not used on the 5 GHz range.

• Linksys EA6100 time questions

  Hello everyone, I'm new here and I recently encountered a problem with my Linksys EA6100.

  So I bought a new router from Linksys EA6100 Best Buy around November 2014. It worked fine until 2 weeks about where every evening between 20:00-12: he just would become unusable in different intervals. It is not the signal that dies, but her intermet. It would really slow down (to the point where I can't load google) for 2 minutes, before quickly going again within 5 minutes, and then slow down again and so on. This does not happen during the day at night, every night.

  I got scared, that it is not the router but the modem, but I recently went for my old Linksys WRT54G Router and even if the signal isn't as strong and as fast, I did not have this problem.

  Anyone know what the problem is with the EA6100?

  Any help would be greatly appreciated, I don't want to buy a new router haha.

  Thank you

  Daniel

  Your Internet settings are good for IPv4. Unless your ISP requires IPv6 you must disable it under Internet settings.

  2.4 Ghz is long range but slower and 5 GHz short range but super fast.

  I recommend allowing the range of 5 GHz and having separate SSID for 2.4 Ghz and 5 GHz signals.

• Wireless router to modem Homeportal 1800 HG 2wire Linksys WRT54G with questions

  I have the Linksys WRT54G, and I'm trying to use it as the router to my modem 2wire Homeportal 1800 HG wireless.  The 2wire has four ethernet Sockets in the back marked from 1 to 4 and a telephone jack to connect to the wall for AT & T DSL service.

  I have the phone jack connected, and:

  -an ethernet cable

  -to one of the sockets at the back of the 2wire ethernet

  -to the 'Internet' on the Linksys ethernet jack

  - and an ethernet cable

  -to one of the ethernet (1-4) at the back of the linksys

  -to the ethernet port on the computer

  The Linksys is unable to connect via the modem and reports that it may not get an IP address from the PPPoE server.  (Directly connect to the 2wire works well though.)

  Who am I wrong configuration?

  There is no side effect of bridge mode... It is one of the mode in which the modem function. When the modem is in bridge mode, you cannot go online with the computer connected directly to the modem... and you will get a 169.254.x.x ip address.

  So after you convert the modem into bridge mode, you must do the PPPoE settings on the router to go online via router.

• resolution iPhone question 6 DPS folio

  Hello

  We have an existing application for the iPad (folio multi with subs) DPS.

  I am redoing to include the iPhone.

  I have configured the folios in 1024 and the HD version for iPad, it seems ok. I tend to make assets rasterised at 50% so they look ok upward.

  Should what resolution I use for the iPhone? If I understand correctly, I'll need to do the "renditions" - two, to take into account the proportions different (3:2 and 16:9). Unlike the iPad, I'm better artworking for iPhone 6 more size and down (Alt layouts), or could I work at 5 and use a similar method to make them clear for 6 and 6 +? He will pick up the res 6 5s and 6 +?

  Thank you

  Matt

  The viewer of the iPhone has no support even for an iPhone 6 / 6 + return. You should design for the iPhone 5, indications that we have, is that iPhone 5 content seems perfectly fine on the iPhone 6 without change.

  Neil

• iPhone problem MetroPCS

  I just put my 6 s iPhone on MetroPCS a few days ago. Immediately, I noticed that my visual voicemail and VoLTE don't work, even if they did on my old iPhone 6. First I reset the network settings, no luck, so I reset the phone and set up as new, still no luck, well after further research, I'm not the only one who has this problem, it is a common problem with the 6s iPhone on the MetroPCS network, even if those features are listed as fully supported on the iPhone directly on the Apple Web site. It is a known problem, and my question is if apple is working with MetroPCS to get this problem solved somehow? I tried to contact MetroPCS on this problem, but their foreign technical support is terrible and really had no indication as to what I was talking about.

  Here are a few links which document this issue:

  http://www.HowardForums.com/showthread.php/1877442-MetroPCS-iPhone-question

  https://www.reddit.com/r/tmobile/comments/3z65qy/metropcs_iphone_question/

• Only problem for iPhone

  Well, I know that it took a lot, and the answer has always been its not supported.

  I just want to know if its in your plan of anywhere for free simple iPhone questions? If so, can you give an indication on the calendar? Thank you.

  Creating applications of single-folio for any platform other than the iPad isn't on the roadmap.

• Where to find the ability auto-raccordement on a router for PPPoE linsys for ADSL connection on request?

  Where to find the ability auto-raccordement on a router for PPPoE linsys for ADSL connection on request?

  Hello

  Use Linksys router information questions.

  Look for the router of the link exact model number.

  http://homesupport.Cisco.com/en-us/support?ICID=global-header-support-link

  See you soon.

• WPSM54G bad firmware update, please help!

  Like my new printserver wasn't doing his job. I went on the site Web of linksys read many questions and tips and forums abot problems with vista etc etc,.

  In fact, the only required for me was to set the printserver as ip tcp for a HP plotter designjet printing solution.

  The problem was that the print job does ' don't stop when the page was sen't and he keept print again and again the same work.

  Yes, according to some advice I downloaded the firmware upgrade for the product... Unfortunately something during the firmware upgrade process was wrong... my print server no longer works...

  I need help to go back or to reset the firmware or something to access the printserver (telnet)?

  Any help would be much appreciated.

  Thanks in advance

  Sorry for my bad English writing.

  Alejandro

  Reset print 30 seconds the server and reconfigure the device again.

• connection problems router WRT310N and wrt54gs * with DSL

  Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

  I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

  A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

  I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

  highlights include:

  (1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

  (2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

  (3) internet connection is fine when I connect to my laptop directly to a dsl modem.

  router 4) implements the home network wireless very well, but with no internet connectivity

  (5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

  I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

  everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

  and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

  so... help?

  still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

  Any ideas on where I'm wrong now?

  Fixed issue...

  in the end, it's a problem between the ISP's modem and the router that they helped me understand.

  My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

  We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

• question about my iphone 6

  I just did the update for my iphone 6 and have 2 questions

  (1) the background on my clock is now black instead of white, black is depressing, not to return white background with black letters?

  (2) when my screen is locked, to open what I have to swipe left then click one of the view and then press the round button and only then will my password are pop up - not just swipe my finger and have this pop up as before?

  Thank you!

  1 will, no sorry there is no way to change this wallpaper clock. You can send feedback to Apple at http://www.apple.com/feedback/

  (2) slide to unlock is over.  If you do not fingerprint recognition to unlock the screen, then you will need to press the button twice to show the password entry screen at home.