Liquid - with a date

Similar Questions

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• Print an e-mail with the date of the transmission

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  anniesol said

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  Problem is now solved! Choose the print option 'other measures' dropdown list allows email to be printed with the date of the shipment.

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• iCloud full - found two backups with different dates

  My 20g iCloud storage is full.  When I went to manage my data, there were 2 backups of my iPhone with different dates.  Can I remove 1 of them (the older one I guess) without affecting my current phone?  I guess that's when I upgraded my iPhone 4 to 5

  Of,.

  Yes, as long as you can identify with certainty the backup latest.

  

• It is no longer possible to fill in the field "year" (Dutch: "jaar" with a date "1600" or an earlier version.)

  I used to fill in the field "jaar" with the date of origin of a piece of classical music. Many years before 1600 original parts. I spent many hours to fill the years because I have som 35000 tracks in my library. 2015 they was tgo is no longer possible to fill a date prior to 1600. Even worse: all already filled dates are missing.

  I ask reinstall the opportunity.

  lvhout wrote:

  I used to fill in the field "jaar" with the date of origin of a piece of classical music. Many years before 1600 original parts. I spent many hours to fill the years because I have som 35000 tracks in my library. 2015 they was tgo is no longer possible to fill a date prior to 1600. Even worse: all already filled dates are missing.

  I ask reinstall the opportunity.

  Lvhout,

  You seem to be the first person to notice him, but I just tried with iTunes 12.3.2 and found the same problem.

  You can send comments directly to Apple at this link:

  http://www.Apple.com/feedback/itunesapp.html

• I show two updates of security with a date of 1969 is that right

  I show two updates of security with a date of 1969 are those just my Fox fire beginning very slow very very slow

  This has happened

  Each time Firefox opened

  Is a month ago

  Firefox must have had a problem getting the time to update your system clock, and so the timing of this update is zero. Time (beginning of time) for Unix is 01/01/1970 midnight GMT, less your GMT offset - what makes 12/31/1969 and 2 to 6 pm on North America.

• problem with the data record

  Hi, I'm new to LabView so I know that the thing I'm doing is relatively easy, however, I'm stuck.

  I made a small program that gets 5 steps (for now replaced with random numbers) and as well as the date and time data in the text file. I intend to run the program for long periods of time, so I want to increment the file name/path every hour, but after the addition of this part of the program does not create any file, although the program runs without error.

  Block diagram is attached, could someone point out to me what is wrong and what I should do to reach my goal?

  Thanks in advance!

  Hi marcis,.

  Acually, the logic of the program was completely wrong.

  1. your comments the file path will never help you. Because after leaving of while loop, the structure of matter will run once and LV will stops running.

  2. open and close the datalog only once file. Try to make all your manipulations between opening and closing your file datalog. Otherwise, it will be difficult to manage when you develop your code.

  3 case construction outside the loop is meaning less. If you want to run the program permanently, place all functions inside the while loop you want to run. While the loop will run continuously until you get satisfied.

  4. incorrect data streams. All programmers need well with the data stream.

  Just go into the basics of labview here and try to realize your logic again

• How to record entries of UI with the data measured in a TDM file?

  Hello

  I built a user interface to monitor and control a pump test bench, I use the USB-6212 in a Windows PC with the new SW and readers.

  Now I try to collect all the measured data and control values in the UI, permanently at 1 kHz and write it in a single file of CT.

  The problem is that only the measured signals get connected, but only a few values at the beginning of the file are saved in the user interface; then all empty.

  I have all tried, producing waveforms, synchronize them with measured data for the same stamps, aling & resample and blocks of collector of the Toolbox Signal Express, but there are still some missing data in the user interface.

  In my original configuration, indicated in the post, I set up the block of analog to read continuously at 1 kHz with 100 samples, while output and analog digital on-demand writing. I have included the file complete, just in case some block causes disruption.

  

  

  Your express DAQ screws will probably be reading/writing of multiple samples for each run, then wire you a single value for your set points. The use of the data type of dynamic signals hides this information from you (that's why nobody is using them once they become more familiar with LabVIEW).

  You need to take only the last value of dynamic data, or touch your set points so they are the same size as your dynamic data. If you write 100 samples at a time, then you will have your set points only once by 100 values. You must create a table/waveform of 100 points with the same value.

• Measures with the date Conference

  Hello

  I have to make an application, as part of my end of study project, which allows to calculate heat flow. Pour this, I have data measured with thermocouples. These data are stored on a data recorder that record these data on a .txt, .xls or .csv file (it is to be chosen by user).

  I'm not very chiseled with LabVIEW.

  In a Prime Minister, I tried to read the .txt file data. I can read the 1st line as I wish but not others.

  So I decided to work with a .xls file. The temperatures Conference goes smoothly. For time is the date, it's more complicated. Indeed, I would like to USE date and time corresponding to each measure to plot a graph XY with the date and time X and Y the temperature of the thermocouple.

  Kind regards

  Here's an example (VI from LV2011 but attached VI en LV2010) made on the basis of your code. Comment by watch it extract the news date and time of the string and generate the the from graph XY time in seconds in X. realized very quickly, it is without doubt room for improvement but you will serve as a basis for work at least.

  

  To define 'Structure box' serving at first as far as being 0 and calculate relative time to the following samples. Thus the x-axis of the graph starts at 0.

  My time is short, I renounce other comments but I happy to answer specific questions.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Opening of attachments with a dat extension

  Windows Mail - can NOT OPEN parts JOINED WITH the DAT EXTENSION.

  Windows Mail - can NOT OPEN parts JOINED WITH the DAT EXTENSION.

  the .dat files are used by programmers to store data.
  Suggest that you inform the sender to avoid sending attachments in formats of .dat files.
  Meanwhile, save it on your computer...
  1.) If you have Excel, see if you have a bit of luck to open it in Excel.
  2.) If you know it's an accessory photo, save the attachment already saved and change the type of file in png or jpg format.  If you know that it is a document, then chabge it in .doc format.

  This is an interesting online Extractor. Check it out.
  Viewer online winmail.dat attachments:
  http://www.winmaildat.com/

  t-4-2

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• (Note) - report - Bluetooth with Enhanced Data rate software II for Windows 7 wipe main drive

  All,

  It was reported that when the upgrade of the Bluetooth with Enhanced Data rate software II for Windows 7 to version 6.4.0.1700 is originally a wipe on the OS main drive (usually C:\)

  Version:	6.4.0.1700
  Release date:	16/05/2011

  Here are the units that uses this version of the driver.

  Support models     ThinkPad L420, L421
                     ThinkPad L520
                     ThinkPad T420, T420i, T420s, T420si
                     ThinkPad T520, T520i
                     Thinkpad W520
             ThinkPad X1
                     ThinkPad X220, X220i, X220 Tablet, X220i Tablet
                     ThinkPad Edge E220s
                     ThinkPad Edge E420, E420s
                     ThinkPad Edge E520
  

  Has been raised to engineering and the team is currently working on this topic.

  Please do not update the Bluetooth driver until further notice *.

  We are in a process to pull the driver from the Support Site and ThinkVantage System Update

  Main thread here

  JMT

  
  

• [Explanation necessary] Clears the listview data and fill it again with new data

  Hello

  I correctly filled a listview in c ++, data analysed and does interesting things with it. However, I am drunk stumbling, unable to find a way delete and repopulate my display of the list...

  Question 1:

   

  1. How can after I insert data in the list view, I clear the list data and run again the same method (init) who populated the list view with the data in the first place?

  Here are the docs that I referenced and I don't understand how to implement the methods in my code.

  QList - clear() method

  https://developer.BlackBerry.com/Cascades/reference/QList.html#clear

  Using the data access Code, example
                            data_access/using_data_source

  GroupDataModel - Clear()

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__groupdatamodel.html#clear

  CODE
  
  Here is my code - filling of the display of the list of C++ and display of data in a ListView.

  MyApp.cpp

  MyApp::MyApp(bb::cascades::Application *app)
  : QObject(app){
      // create scene document from main.qml asset
          // set parent to created document to ensure it exists for the whole application lifetime
          QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
              AbstractPane *root = qml->createRootObject();
              qml->setContextProperty("yoyo",this);
              //grab references
              list_view = root->findChild("listView");
  
              // set created root object as a scene
              app->setScene(root);
  
              mNetworkAccessManager = new QNetworkAccessManager(this);
              bool result = connect(mNetworkAccessManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(requestFinished(QNetworkReply*)));
  
               Q_ASSERT(result);
               Q_UNUSED(result);                 json = new QFile("data/file.json");
  }
  
  void MyApp::init(){
      QNetworkRequest request = QNetworkRequest();
       // i call some service here
       mNetworkAccessManager->get(request);
  }
  
  void MyApp::requestFinished(QNetworkReply *reply){
      qDebug() << reply->error();
      qDebug() << reply->errorString();
      if (reply->error() == QNetworkReply::NoError) {
          qDebug() << "No error";
  
                  QByteArray data = reply->readAll();
  
                  if (!json->open(QIODevice::ReadWrite)) {
                      qDebug() << "Failed to open file";
                      return;
                  }
                  json->write(data);
  
          bb::data::JsonDataAccess jda;
          QVariantMap results = jda.loadFromBuffer(data).toMap();
                  QVariantList lst = jda.loadFromBuffer(data).toList();
              GroupDataModel *m = new GroupDataModel();
                     m->insertList(lst);
                     m->setGrouping(ItemGrouping::None);
                     if(list_view) list_view->setDataModel(m);
  
      }else{
          showDialog("Boo",reply->errorString());
      }
  }
  

  MyApp.hpp

  // Tabbed pane project template
  #ifndef MyApp_HPP_
  #define MyApp_HPP_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  namespace bb {
  namespace cascades {
  class Application;
  }
  }
  namespace bb {
  namespace data {
  class Application;
  }
  }
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class MyApp: public QObject {
  Q_OBJECT
  public:
      MyApp(bb::cascades::Application *app);
      virtual ~MyApp() {
      }
      Q_INVOKABLE
      void init();
  private slots:
      void requestFinished(QNetworkReply *reply);
  private:
      QNetworkAccessManager *mNetworkAccessManager;
      QNetworkRequest *request;
      QFile *json;
      bb::cascades::ListView *list_view;
  };
  
  #endif /* MyApp_HPP_ */
  

  hand. QML

  import bb.cascades 1.0
  
  Page{
  Container {
                          background: Color.White
                          ListView {
                              id: listView
                              preferredHeight: maxHeight
                              objectName: "listView"
                              listItemComponents: [
                                  ListItemComponent {
                                      type: "item"
                                      Container {
                                          Container {
                                              Label {
                                                  text: ListItemData.id
                                              }
                                          }
  
                                      }
                                  }
                              ]
                              onTriggered: {
                                  console.log("selected_index: " + indexPath)
                              }
                              horizontalAlignment: HorizontalAlignment.Center
                              verticalAlignment: VerticalAlignment.Center
                          }
  
  }
  }
  

  Question 2:

  How reference to the ListView object with the name "listView" in different parts of the MyApp.cpp file? Is there anything else I should add to the header file to make the accessible listView?

  Question 3:

  What happens when you call the clear() method? How the data model is affected? How the user interface is affected? What happens in memory?

  Question 4:

  How do you verify that the data in the list has been deleted so that you can go ahead and fills again with new data? What is the cheque that I perform?

  I would also like to know how you manage multiple views of lists and data sources in your applications. Best practices or ideas?

  Thank you
  

  I was able to clear the listview with the following code, if anyone is interested.

  listView.dataModel = null
  

  The dataModel must be set to "null".