List of standard devices

Similar Questions

• I don't know how to add additional devices to my list of "trusted devices" in my Apple account.  When I opened my account on Apple using my apple id, I see only my iphone6 listed as a "trusted device";  There is a button to edit, for example. Delete the d

  I don't know how to add additional devices to my list of "trusted devices" in my Apple account.  When I opened my account on Apple using my apple id, I see only my iphone6 listed as a "trusted device";  There is a button to edit, for example. deleting devices, but I can't, or I do not understand how to add my other devices to my approved devices - but is anyone know how to add my Mac and iPad to this list?

  Download a purchase on a device should associate this device with your Apple ID take a look at this.

  View and delete devices in iTunes - Apple Support

• 3 monitors listed in the Device Manager on Tecra A6 PTA60E

  I have a PTA60E A6 under Xp Pro SP3 with all updates.

  I notice that in Device Manager in the monitors, I have three monitors monitors under graphics cards and Play Plug listed abd, I have the Intel 945 chipset appears twice.

  How to get back to showing just one of each?

  Shaun

  Hello

  I have 2 different laptop with Win XP and Vista pre-installed.
  In both cases, the three monitors are available and listed in the Device Manager.
  I guess there is nothing wrong with the system and the entries are correct.

  You don't have to be worried about that ;)

• Second Hard Drive not recognized / climb (but it IS listed in the Device Manager)

  I have a HP Compaq DC7800 convertible mini tower running than Win 7 Pro 64-bit

  I installed a second hard drive, and while I can see listed in the Device Manager, it is not mounted.

  That is to say, it is not in the computer > field at all.

  The second hard drive is a Hitachi HDT721032SLA360 ATA Device

  Under the hardware ID, it is said: IDE\DiskHitachi_HDT721032SLA360___ST2OA38E

  I thought it was a driver problem. Device Manager indicates that it uses the Microsoft 6.1.7600.16385 driver.

  I can't find a Hitachi driver for this player. My understanding was that this drive would NOT need drivers.

  I have it in the plug of P5 (I think it is P5, it's at the end of the cable with the primary hard drive) and I have a data cable sata from the sata port on the rear of the disc in the slot sata on the motherboard next to the slot in the place where the main in drive is plugged.

  The only sites that list the drivers for this drive are all spam (thanks, google) sites.

  What I have to change something in my Bios?

  Thanks in advance.

  If the drive is listed in the device but not 'computer' Manager, it must be mounted or a new volume must be created. Please see HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• ThinkPad Tablet 2 BIOS: I can't change the list of boot devices. Help, please!

  Hello community,

  I need to restore Windows on my ThinkPad Tablet 2 via USB. But I can't change the list of boot devices in BIOS. The F12 option is not available. It is said: "F12 key is used to call a pop-up the boot devices list. This option is available only when supervisor enters setup. »

  What can I do?

  Kind regards

  The problem is solved!

• list of new devices that will support OS 5.0 and 6.0 of the Ocean

  Hi all

  Can anyone give me any idea from where I can get the list of bb devices which will help OS 5.0 and 6.0 O.S.

  Thank you all

  Hi maanbhati,

  Click on the following link:

  https://swdownloads.BlackBerry.com/downloads/entry.do?code=060AD92489947D410D897474079C1477

  Select here the version of the OS and get the list of simulators for this OS.

  Roshni-

  Press the button so resolute Bravo.

• Where can I get a list of all devices that support OS 5.0

  Hi all

  When you submit a request to the AppWorld, I wonder to select the supported devices. My applications work on any device with OS 5.0, but I can't find a list of all devices that support OS 5.0 (shipped with it or with option 5.0). Anyone knows where I can find such a list.

  Thank you

  Wolf

  Don't worry about this. Just select as minimum supported OS 5.0 version and after that select all possible devices. App World will correspond to devices, and the version of the OS, i.e. users with OS 5.0 devices will see your app while that those who have the lower version of the OS won't be able to see or to download your application.

• How to display this window that lists all the devices of storage connected to my PC?

  How to display this window that lists all the devices of storage connected to my PC? It lists each device, how much space is used and how much is free? I sometimes open it by accident, but I can never find it when I'm looking for it.

  original title: storage devices

  Beginning

  Control Panel

  If you the small icons view do the following:

  Administration tools

  Computer management

  Storage

  Disk Managment

  If you have the category view do the following:

  System and security

  Administration tools

  Computer management

  Storage

  Disk management

• The list of audio devices connected to the operating system has been changed

  Hello, I have a problem with rendering in Media Encoder CC. When I realized the video suddenly a message "THE LIST OF audio devices connected to the operating system was changed. Open Audio hardware preferences? "and rendering are collapsed by increasing the time until infinity.

  Any suggestion?

  Thank you very much.

  

  

  [Moved the Forum of the SOUL of the After Effects - MOD forum]

  Hmmm.  It's very strange.  For the experience, I tried to disconnect a sound card, while the SOUL is coding.  I get the message dialog box, but the encoding continues without stopping.  Eventually, this may be specific to certain sound cards.  What is your sound card that you have on your computer?

  For a workaround, could you try checking the "do not show again" checkbox in the message dialog box next time you see it?  Then, click no you should not see this message again and I hope that this problem would disappear.

• I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I do not think that information... Adobe titles represent the only link I know following your accounts, but not where the programs are installed

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

• ESXi list of USB devices

  Hi all

  I need to connect USB on ESXi 4.1 drive to VM, but I do not consider the USB device. Perhaps is connected to the other VM, or disk is disabled, but server is located on the remote location and I can't check this.

  Can I list the USB devices connected to the server or the computer virtual ESXi?

  Thanks for the reply

  Petr Buchmaier

  Try lsusb d

  Djamel

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• standard device vicfg-scsidevs name

  I have ESXi 5.0 installation and attached with FreeNAS iscsi storage. I created two LUNs. I run following command on vMA its sends a UID name t10. FreeBSD_iSCSI_Disk... for the two LUNs.

  Question is how can I get standard vmhba33:CX:TX:LX standard? in the GUI, I can see that, but how can I get this result in command line?

  VI-admin@localhost:~[esx5-02. Outcome.com] > vicfg-scsidevs - u
  Another primary UID UID
  MPX.vmhba32:C0:t0:l0 vml.0005000000766d68626133323a303a30
  T10. FreeBSD_iSCSI_Disk___000c29541257000___ vml.0200000000300000009e5c0b03695343534920
  T10. FreeBSD_iSCSI_Disk___000c29541257001___ vml.0200010000300000004319a1bb695343534920
  MPX.vmhba1:C0:t0:l0 vml.0000000000766d686261313a303a30

  "Esxcli" allows to get the name of DURATION:

  VI-admin@Scofield:~ > esxcli - path of the storage core - username Server himalaya.primp list - industries.com
  SATA.vmhba32 - sata.0:0 - t10. ATA___INTEL_SSDSC2MH250A2___LNEL1094079D250DGN__
  UID: sata.vmhba32 - sata.0:0 - t10. ATA___INTEL_SSDSC2MH250A2___LNEL1094079D250DGN__
  The Runtime name: vmhba32:C0:T0:L0
  Feature: t10. ATA___INTEL_SSDSC2MH250A2___LNEL1094079D250DGN__
  Full device name: disk ATA (t10. ATA___INTEL_SSDSC2MH250A2___LNEL1094079D250DGN__)
  Adapter: vmhba32
  Channel: 0
  Target: 0
  LUN: 0
  Plugin: NMP
  State: Active
  Transport: sata
  The identifier for the adapter: sata.vmhba32
  Target ID: sata.0:0
  Details of Transport card: unavailable or access path is not claimed
  Transport target details: unavailable or access path is not claimed

• Rename the mac for a list of the devices apple ID?

  After getting a new MBP 15"I have now two devices listed under my identifier Apple as 'Cynthia MacBookPro 15"... »

  If I wanted to continue to use the other oldest, I wish I could tell them apart. How can I rename them? I thought naming drives was sufficient, but these names do not appear (these are the names that a be assigned in the pane sharing preferences).

  Remove the device that you want to rename your Apple ID account. Go to system-> sharing Preferences and change the name as desired, then re - register this device with its new name.

• List fonts standard iOS 9?

  If anyone knows where I can find a list of the standard fonts that are installed with iOS 9, I would greatly appreciate a link.

  Bonus points if the list includes several examples of each font.

  Something like that? http://iosfonts.com