standard device vicfg-scsidevs name

Similar Questions

• List of standard devices

  Y at - it somewhere where I can find what standard devices should be on the Tecra 9000. More specifically the audio, video, and game controllers.

  I tried to fix an audio problem and would like to delete all scheduled in this section and then add, but I would first of all be sure I have those installed correct & second would need help to remove these devices. All mine currently listed have no option to 'disable' or 'uninstall' which I think in the strange.

  Hello

  Sound: Yamaha YMF753 - stereo 16-bit Sound Blaster Pro compatible System (WAVE und MIDI)
  Video: S3® SuperSavage/IXC 1179

  All devices would be recognized and installed WXP. I don t know what kind of noise problem you have but I can just advice allows you to use the driver of its origin. All drivers are designed for this model and if you are using another driver there is no guarantee that it will work properly.

• How to find the corresponding devices ESX LUN names

  Hi all

  On the ESX host when I go the directory of devices, it gives me the list of the devices that are connected to the ESX host. an example of this would be

  LS/vmfs/devices/disks and the output is similar to

  SYM.012310084730303430
  SYM.045610084730323537
  SYM.078910084730323537:1
  SYM.010010084730323545
  SYM.013450084730323545:1

  Now, these are devices that are presented to the ESX cluster from the storage point. SYM will in this case be EMC.

  When it is presented to the ESX will give him a friendly data store name.

  My question is:

  How can I check the name of the corresponding sym.012310084730303430 data store

  Any help will be greatly appreciated.

  Kind regards

  VAN

  Hello

  on ESX 4, you can use the command: "esxcfg-scsidevs - m" for a list of devices. For more info (also for other versions of ESX (i)) Please take a look at the following KB article dealing with your question:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1014953

  Concerning

• Get NI Daq device using C++ name

  Hi, I'm having some problems by using nisysconfig to programaticaly API to retrieve the name of the device of data acquisition. What I mean is the following:

  When you open MAX and get the list of devices, they will have names such as 'Dev1', "Dev2", etc. I'm trying to retrieve this same information in C++. I use NISysCfgGetResourceProperty but I can't seem to get this property to return. I was able to retrieve the serial number, the name of the product, etc, but not this device name. Any ideas?

  Here is a snippet of my code:

  NISysCfgSessionHandle sessionHandle;
  NISysCfgInitializeSession("localhost", NULL, NULL, (NISysCfgLocale)0, (NISysCfgBool)false, 100000, NULL, &sessionHandle);
  std::cout << "Initialized session" << std::endl;
  NISysCfgEnumResourceHandle resourceEnumHandle;
  NISysCfgFindHardware(sessionHandle, NISysCfgFilterModeMatchValuesAny, NULL, NULL, &resourceEnumHandle);
  std::cout << "Find hardware" << std::endl;
  NISysCfgResourceHandle resourceHandle;
  
  char productName[NISYSCFG_SIMPLE_STRING_LENGTH];
  NISysCfgGetResourceProperty(resourceHandle, NISysCfgResourcePropertyProductName, &productName);
  

  You want the "Alias" not the name of the product

• How to get the name of the bluetooth device and the name of the bluetooth device address device class?

  Hi all

  Can I know how to get the bluetooth device name and the name of the bluetooth device address device class?

  Example:-if my bluetooth device address is :-98:EB:CD:01:1F::90 then how do I get my bluetooth device name?

  I hope you understand my problem. Let me know as soon as possible.

  :

  Thanks for the reply.

• How to connect to a standard account with my name and password administrator

  I installed Word 2016 for Mac on my Macbk Pro and set the preferences you want under my administrator account.  When I tried to do the same thing under my standard account, which I use most, it seemed that changes had been made, but they didn't - eeven after a reboot.  I thought signing into my standard account as an administrator would get the changes, but don't see how to do it.  Advisor?

  Not the case. You can make changes by the admin account. This is the point of the entire configuration of the two accounts.

• Mixer volume for the speaker shows controls a device called a name is not not available and generates internet audio randome at startup.

  No visual source audio stream, does appear, that sounds like a TV to the scan mode.  I can turn off the audio controls, but it restarts everytime I turn on the computer.  I can't find anything at the start that I can identify as the culprit.  Also, it stops if I disconnect from the internet.  I have a FIOS internet DSL and a wireless router.  This just started happening a few days ago.  System Restore does not resolve it.

  Hi William,.

  1 do you have the new Windows updates recently?

  2. were there any changes (hardware or software) to the computer before the show?

  The problem can occur if the sound card drivers are not updated. It can also occur if there is malware present on the computer.

  Method 1: Update sound drivers and check if it helps.

  Update a hardware driver that is not working properly(Windows 7)

  Method 2: use the Microsoft Safety Scanner in full scan mode and to remove all the threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Note: do see you this device in the Device Manager, in the affirmative, then right-click on it and uninstall it and see if it works.

  Answer please if you have any questions.

• Standard invoice document category name is urger in disable mode ples!

  Hi all
  
  When I create the invoice in the work of invoice document category is in disable mode. I did all the required configurations, but it is not allowing me to enter the category of document.
  
  Version is 11.5
  
  Kind regards
  Rahul
  
  Edited by: 956206 on Sep 5, 2012 03:34

  Hi Raju.

  Have you checked the possibility of sequence?
  Navigation = / Application/Document/assign
  Query for category = Standard and Application = accounts payable, and see if you have a transfer valid for the value of the used book (manual method).

  Octavio

• Windows Server 2012 R2 Standard - devices and printers tab crashes, does not properly

  Tried the fix following from other proceedings;

  1. Printer driver isolation value in print management.
  2. Don't have Bluetooth services.
  3. Deleted the files in this folder '% WINDIR%\system32\spool\printers '.
  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Can I have the Profile Manager uses the name of the device used when the placement of placeholders?

  Can I have the Profile Manager uses the name of the device used when the placement of placeholders? Currently, all get renamed 'iPad' when the device through DEP configuration.

  No, but

  I was putting new devices in groups of temporary devices and renaming in bulk, once they are configured for the user, by using user variables / unit...

  The other annoying problem would be the user modifies the device name when they connect it iTunes...

  • the %destinataire% email - address email (the EMailAddress attribute)
  • first_name % - first name (FirstName attribute)
  • full_name % - full name (attribute RealName)
  • % of guid guid (GeneratedID attribute)
  • last_name % - last name (the LastName attribute)
  • the title of the post (the JobTitle attribute) %

  -% mobile_phone % the number of mobile (laptop attribute)

  • short_name % name run (the RecordName, generally the name of the account attribute)

  The variables of the unit are:

  • % BuildVersion % - full OS version on the device
  • ICCID % - ICCID (from the SIM card)
  • IMEI % - IMEI (International Mobile Equipment Identity)
  • OSVersion % - common version number of the operating system of the device
  • ProductName % - name of the product
  • SerialNumber % - serial number
  • % WIFIMAC %-MAC address of the WiFi interface

• N900 no names of devices devices connected

  When I look in the settings of connected devices wireless base. I see ipnr in mac address but the devicename is empty. How can I change this, so that I see the devcice name that I give in the Advanced setting configuration lan address reservation.

  Hi bert123,

  The name of the device under devices detects the name that you created on the device itself and not on the reservation IP page.

  JamesGL
  The community team

• Vista cannot install/search drivers for 3 devices that work fine on XP PC. Tried all standard troubleshooting.

  With 2 usb devices (hard drive recovery now used as external; Sansa Fuse mp3 player) and a Sandisk sd memory card, a message says: there need locate and install driver software.  Usb devices, allowing to work on the Vista pc and still works on XP PC; SD card is brand new.  Since none of the devices came with the CD, I ask the wizard to find the drivers for me.  Whenever he is unable to find the drivers for all three devices.

  Problem w / all 4 usb ports. Vista is completely updated.  Completely upgrade from Sansa MP3 player.  Manually tried to update or uninstall device drivers via "Control Panel - System - Device Manager-[select the device with the yellow exclamation mark on it]"-update software or uninstalling the driver. ""  It does not work every time.

  Other devices USB (jumpdrives, pregnant, webcam, another external hard disk) still work.  Devices used to work on the machine still work on XP machines.  I would try a system restore, but the problem exists longer than my old restore point.

  Vista 32bits 1.83 gHz 4 GB ram laptop

  Recharged by DELL about 4 months ago, when the motherboard has no operating system.

  Chris - Support Engineer,

  Thank you for your (and others) will help, but I would like to respectfully ask you and others to read previous posts before making suggestions (especially before posting a link to a site with advice extremely good sense).  I clicked on your link.  It is recommended 3 things:

  1. use Windows Update. You will have to perhaps set Windows Update automatically download and install recommended updates.

  In my original post, I wrote: " " Vista is completely updated. »

  In my original post, I wrote: " " Manually tried to update or uninstall device drivers via "Control Panel - System - Device Manager-[select the device with the yellow exclamation mark on it]"-update software or uninstalling the driver. ""  This fails every time. »

  2. install the software from the manufacturer of the device. For example, if your device is equipped with a disk, this disk can contain software that installs a driver for the device.

  In my original post, I wrote: " " Since none of the devices came with the CD, I ask the wizard to find the drivers for me.  Whenever he is unable to find the drivers for all three devices. »

  3. download and update the driver yourself. Use this method to install a driver that you download from the manufacturer's website. This ifWindows update can't find a driver for your device and the device didn't come with software that installs a driver.

  In my original post, I wrote: " " MP3 player is completely updated to Sansa [site Web of Sandisk]. »

  In my fourth post, I wrote: " " The mp3 player has drivers up to date.  I updated yesterday through another computer"

  In my fifth post, I wrote: " " SanDisk I would exchange my mp3 for a brand new player.  I just got a new, but still have the same problem. "Even if I somehow don't had not updated the drivers correctly, it seems unlikely that a brand new from the manufacturer would also have exceeded the pilots.

  AND

  I quoted in my fifth post, site of Seagate on each of my hard drives Maxtor and Seagate external:

  "Seagate and Maxtor-brandexternal hard drives require no additional drivers work inWindows Vista,Windows XP,Windows 2000orMac OS X." These external drives are supported by the standard device drivers that are already included in these systems out of the box.

  Yet once again, I really appreciate your (and everyone elses') willingness to help, but I doubt that you would have sent me the link to this page of tips if you had read my posts more closely.  Instead, you would have seen that I had already completed all the steps suggested your Web site.

  Moreover, anything ever (including twice running the OS disk to repair Windows).  The problems have been fixed only after that I completely rebooted Windows.

• Change device name was detected

  Hello

  I have a machine to 2008R2 who is discovered with OMSA and iDRAC.  In the application logs I see ' change device name was detected based on MAC address xxxxxxx old name: xxxxxxx, new name: xxxxx "the old name is the host of the OMSA DNS entry and the new name is the DNS entry for the iDRAC.

  OME is getting confused?

  If it is not recommended to discover with OMSA and iDRAC for same host?

  Thank you

  Tim

  Hi Harris,

  The message that you see in the newspapers is to name DNS change in the database. If you notice the tree view of the devices, would not have changed the name of the device in the devices tree. Is this correct?

  For cases, when the server is inaccessible, there is no way that OME is unable to make a name for this resolution and if the DNS name of the device goes into the database and it takes the name DNS iDRAC. Newspapers are for all changes that occur in the database.

  You can certainly discover iDRAC and server set and correlation between server and RAC should arrive in the tree view of the devices with the name of the specified server.

• Photos shared on iOS devices use data?

  I have created a number of shared albums in the Photos on my Mac and iOS devices.

  When other people visit then shared albums, what data are used to access?

  I invited a person to see a shared album which had mobile data off on their iOS device and no wifi. However, they were able to access a shared album which surprised me because I assume they would have need of mobile data or wifi.

  Shared albums are stored locally on the iOS devices. Photos downloads smaller and optimized versions pictures of an iPhone. iCloud, sharing photos - Apple Support

  Once shared, pictures taken with your standard devices, iOS devices or cameras have up to 2048 pixels on the long edge. Panoramic photos can be up to 5400 pixels wide.

• MacBook Pro keeps coming back to old name

  I changed my name on my MacBook Pro, but every time I connect a new device, the old name happens. The new name is still there in users and groups. Is there something different I have to do?

  Hi katesiemens,

  I understand that you are trying to change the name of your account on your MacBook Pro, but see the old name when connecting to other devices. Fortunately, the steps described in the section called "changing the account name and the name of the folder" in the article below, while a good bit more complex, will perform the desired change.

  Change the name of the OS X user account and the name of folder on your Mac.
  https://support.Apple.com/en-us/HT201548

  See you soon!