List of Windows updates failed

Similar Questions

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• "Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed?

  " Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution for the error Code: 80070002 0 x ' OR '0 x 80070003 '.

  To resolve this problem, remove the download directory and then to return to the update sites. To do this, follow these steps:

  1. Stop the automatic updates service. To do this, follow these steps:
     1. Click Start and run, type services.msc, and then click OK.
     2. Right-click the automatic updates service and then click on stop.
     3. Minimize the Services snap-in.
  2. Rename C:\Windows\SoftwareDistribution directory. To do this, follow these steps:
     1. Click Start, run, type cmd, and then click OK.
     2. Type cd %windir%, and then press ENTER.
     3. Type ren C:\Windows\SoftwareDistribution SDTemp, and then press ENTER
     4. Type exit and press ENTER.

     Note When you delete the folder % windir%\softwaredistribution, the history list is erased from the "Review your Updates" section of the Windows Update Web site. This action will not affect the updates installed on your computer. Subsequent updates will appear in the history list.

  3. Start the automatic updates service. To do this, follow these steps:
     1. Expand the Services snap-in.
     2. Right-click the automatic updates service and then click Start.
     3. Close the Services snap-in window.
  4. Visit the Windows Update Web site, Microsoft Update Web site, or the WSUS server again, and then download an update.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Windows Update: failed. __Code 643 windows Update encountered an unknown error. _ * AND * __I cannot repair Windows 7 with the disc either. My guess is: these issues are related...? __

  I have THREE questions which PEUVENT all be linked togther... What do you think?

  [I am slot as Windows 7 Ultimate (free upgrade to Dell PC w/purchase) on a Dell 64 bit PC XPS435]
  I've upgraded from Vista about 3 weeks ago.

  #1 - Two weeks ago I had a problem with the installation of Nero/LiquidTV-TiVo to my PC... (this is also when the problem started).
  To get the "Nero" thing figured out, I took the advice of someone on the Forum/Blog of Nero. The person has provided a lenghty explanation how to uninstall LiquidTV completely by removing the registry files... I don't really know what I'm doing in the registry, but everything that I helped my problem of Nero, but I couldn't tell you WHAT I deleted OR if I have deleted any bad subfolders or whatnot!... the next time I started my PC is when the NEW NUMBER is right.

  #2 - On my next BOOT, Windows Update has found an IMPORTANT update:

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

  .. .and it fails every time, it tries to install saying this:

  Windows Update - failed

  Code 643 Windows Update encountered an unknown error.

  "Get help with this error" provides little or no help... but it says this:
   "WindowsUpdate_00000643" "WindowsUpdate_dt000"
  
  All the research I did, the problem seems to be with Microsoft .NET Framework... .and all the solutions I found talking about it, "UNINSTALL all THE .NET FRAMEWORK & REINSTALL" ... I tried and there is no .NET Frameworks listed in Add/Remove, and when I press on ' VIEW INSTALLED UPDATES'... " on my PC it says, "no updates are installed on this computer"... what the _____?

  #3 - Today, I thought I would just pop the WINDOWS 7 installation disc and do a repair/upgrade... It will not be upgraded.
  He cycles most of the way through, then he Has STOPPED and says this:

  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task, (it lists only a SINGLE task), and then restart the upgrade to continue.

  • Windows needs to be restarted if necessary to system files can be changed before you continue.

    Does not help restart. He tried 3 times and he ends up doing the same thing.
    Is it possible I deleted something out of the register so far here and which is cause of all this?
    If so, is it possible to fix WITHOUT doing a new install of Windows 7?
    OR... anything can be a problem... Please HELP!

    (And please note: I am a first year student college with specialization in computer science... but I just started last semester, so I don't know what I should... yet. - though, I SHOULD have known better than to mess with the registry!) My bad).

    Thanks a lot for your time in advance, and I look forward to hear from you!  VikeMike4
    

  Erwan,
  You must read this entire thread and the State, if you have tried the steps listed here or that you tried to fix the problem.  Take a look at this article, because it has a solution for 643 errors: KB971187
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

  Code 8007045 that appear when Windows Update fails to install important updates

  Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

  HOW to hide an update or restore a hidden update
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Window updates fail, keys corrupt registry patch, (Kb265370) and (KB2656353) failed

  I used the fix it tool and discovered that I have a problem of "KEY of REGISTRY PATCH CORRUPT" can someone tell me how to solve this problem.

  Every time I try to install windows updates .NET Framework 1.1 (Kb265370) and (KB2656353) failed!

  Hi Queenelease,

  ·         What testing Fixit have you tried?

  ·         You receive an error message or error code in the Windows update fails?

  Follow the steps listed in the following article to resolve the problem:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• C8000643-error Windows Update fails to check the fo updates

  Original title: Windows Update fails to check the fo updates.

  I receive the error code c8000643. Anyone have any ideas?

  Hi kycats04,

  You can try the steps listed and let us know the results

  Method 1: Windows Update works not.

  http://support.Microsoft.com/kb/555989

  Method 2: Update of the system for Windows Vista tool

  Click on the link, download and run the file

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=504

  Method 3: Use the System File Checker tool to solve system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Windows update fails on Windows 8

  I am trying to run Windows Update, but I get the following error:

  Bucket-311439778 of error, type 5
  Name of the event: WindowsUpdateFailure2
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: 7.8.9200.16604
  P2: 800700c 1
  P3: E6B23740-EA87-4CD8-99D1-8F0400A8776F
  P4: install
  P5: 101
  P6: unmanaged
  P7: 0
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.8.9200.16604_893c901f691bcc1ee5c2342473d01b18cc28b59a_10e64ee1

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 78059e59-548f-11e3-beff-685d438f85c6
  State view: 16
  Bucket Hashed: 348aaca8b698b472bd5cb3c029810536

  And here is the content of the attached file:

  Version = 1
  EventType = WindowsUpdateFailure2
  EventTime = 130297196936000181
  Consent = 1
  UploadTime = 130297196936312709
  ReportIdentifier = 78059e59-548f-11e3-beff-685d438f85c6
  Response.BucketId = 348aaca8b698b472bd5cb3c029810536
  Response.BucketTable = 5
  Response.LegacyBucketId =-311439778
  Response.Type = 4
  SIG [0]. Name = ClientVersion
  SIG [0]. Value = 7.8.9200.16604
  GIS [1]. Name = Win32HResult
  GIS [1]. Value = 800700c 1
  GIS [2]. Name = UpdateId
  GIS [2]. Value = 1-8F0400A8776F E6B23740-EA87 - 4 CD 8 - 99 d
  GIS [3]. Name = scenario
  GIS [3]. Value = install
  GIS [4]. Name = SourceId
  GIS [4]. Value = 101
  GIS [5]. Name = environment
  GIS [5]. Value = unmanaged
  GIS [6]. Name = LastError
  GIS [6]. Value = 0
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.2.9200.2.0.0.256.48
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 1046
  State [0]. Key = transport. DoneStage1
  State [0]. Value = 1
  FriendlyEventName = Windows Update installation problem
  ConsentKey = WindowsUpdateFailure2
  AppName = host process for Windows Services
  AppPath=C:\Windows\System32\svchost.exe
  ReportDescription = A Windows update has not been installed correctly. Send the following information to Microsoft can help improve the software.

  It's a Windows 8 Pro 64
  THAT IS TO SAY 10.0.9200.16660
  I don't have any other antivirus installed.

  Here is the list of updates that could not be installed:

  KB2861704
  KB2871389
  KB2861702
  KB2883201
  KB2862768
  KB2836946
  KB2868626
  KB2847311
  KB2898108
  KB2883150
  KB2888505
  KB2876415
  KB2893519
  KB2862152
  KB2875783

  What should I do?

  Hello

  You can disconnect all the external devices and also suggest to perform a restore of the system, as mentioned in the article. Check the question after these steps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: Do not perform repair installation on the computer.

  Hope this information helps.

• Windows update fails-G62-225DX - bad startup a factory?

  My nephew came to me recently with a G62-225DX HP, concerned about safety.  Given this machine is several years old (recently handed down from his father - I quickly understood why), I was surprised to see she was always being basic Windows 7 Home Premium.  Without SP1.

  My first attempt to resolve this was to run Windows Update - no luck - immediately fails with "cannot run - services is not started.  Of course, verification services, yes I see WU and BITS running.

  So, like any good tech person, I check in the case where the logs and see various errors, including the constant complaints on the Crypto database being corrupted.

  Then, up to be Googling for these symptoms/messages.  I see many people with the same problem and a lot of suggestions on how to fix this (re - reg WU, STRANDS of clear/reset, flush/empty C:\Windows\SoftwareDistribution, catroot2 flush/empty, etc.).  Even seen one on the Intel hard drive problems due to replace it with a drive of more than 500 GB (this unit still has the original 320).

  Spent hours trying all the suggestions there, especially when people said 'Yes, that fixed', nothing helps.

  Since it was not something of value on this machine, I decide backup and restore "factory".

  Imagine my surprise when, after reset of the image 'factory', it has exactly the same problem - Windows Update fails, out-of-the-box on the right!

  I think to myself, it's crazy.  The machine is faulty from the start and everyone was naïve to not get Windows updates, AT ALL!

  I even decided to try the Windows Update Checker (supposed to perform before installing SP1) and it fails with ' Windows Update Standalone install encountered and error - 0xc80000247 ".

  So, I decided to run through the suggested fixes (from M$, no less) and all of a sudden, that Windows Update works.

  I thought, it's fantastic.  He immediately calls to > 130 fixed critical.

  After a few hours of download and installed, I restart only to get a BSOD - STOP 6 b - AAARRRGGGHHHH!  Tried to go through Windows restore previous checkpoint but that too fails with a mysterious error.  In addition, many Google hits on the 6 b says that it's a hardware problem.  But he was executed until the Windows update, with nothing in the case where newspapers to indicate hardware problems.

  Then, I decided to do a restore from the image of what I started with.  At least it ran, even though she could not be updated.

  I no longer dig and see a bunch of updates to the firmware/software for this machine, including the BIOS.  Even saw some strange 'Windows updates' HP.  I thought maybe it was something like the fiasco when the power management update for Intel processors had on machines AMD, thus paralyzing them!  Still nothing - WU still does not work!

  Tried again to return to the original image, hoping that maybe to install all updates of office/hardware/driver on a virgin machine solve the problem.  Nope-WU still does not work.  Even went back through all the suggested fixed (saved as .bat files everthing).  Nothing, nada...

  So, I'm posting here in hopes that someone has a miracle cure that I missed.

  Hello:

  I don't have a magic bullet...

  The same thing happened to me while working on a friends HP 8100 Elite CMT, Windows 7 Pro, HP original image.

  Would not install SP1 or Windows updates. I tried every trick in the book and after spending more than two hours, going nowhere, including restore from the recovery discs, I decided to install a plain OS W7 clean add drivers myself using the product key for W7 on the PC.

  It has worked well.

  You can do the same thing if you can read the product key of W7 on the bottom of the laptop, and your nephew can't live without programs that was shipped with the PC.

  In addition, if you format the drive and just install W7 on current partition, you can probably find the program of the installation files for the programs supplied with the PC in the SWSetup folder.

  Here's how to do when you don't have installation of W7 media.

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• Windows update failed error codes 643 and 800736B 3

  My computer trying to install updates, but fails - I checked update history and it installed OK until the 16.10.2010, the installed just a few of the UpdateA and is now not install at all. I get 643 and error codes 800736B 3. I ran the resolution of problems and he can't find any problems. I am running Windows 7, the computer was new at the beginning of last October. can you help me, please?

  Windows update fails to install with error code 800736B 3 updates

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/98573891-EEAD-4257-8bf2-1fbac3f2a96a >

• Windows Update fails to check for updates on Windows 7 Ultimate 64 bit.

  Windows update fails with error code "c80003fa" or full "0xc80003fa". The search for answers from Microsoft and google provided a few resources, but nothing about the 64 bit version of Windows 7.

  The 'Automatic update' service is also absent from the services.msc

  This I think if applies also to Windows Live Messenger not me open a session because of an error "8e5e03fa."

  I can provide WindowsUpdate.log on request.

  Thank you

  ... I have not an antiviral program installed. Nor I have ever not to mention that the default windows Defender. Who now can not upload...

  Windows Defender is NOT an antivirus application.

  You see the effects of the hijackware infection give.

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista - Windows update fails, the error code 646

  My windows update failed code 646

  My windows update failed code 646

  Hey wagmalik

  Microsoft gave advice about your error code 646 in the microsoft below link

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller