ListView and point unselectable

Similar Questions

• How many layers and points can be included on any map data in map Point 2013?

  How many layers and points can be included on any map data in map Point 2013?

  Hello

  Check with the help of MapPoint and in the MapPoint Forums.

  Highway, Streets & Trips, MapPoint - Forum
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  MapPoint - Support
  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I was working on a microsoft word doc and all of a sudden all paragraph marks and points between each word that presented themselves. How can I get rid of these?

  I was working on a microsoft word doc and all of a sudden all paragraph marks and points between each word that presented themselves.  How can I get rid of these?

  You click the Show/Hide in the Standard toolbar.  The location of this button may vary depending on the version of Word that you have (that you did not state).  Click the button again to make the marks disappear.

• Photos attached to email has lines and points when open.

  ATTACH PHOTO TO EMAIL,

  WHEN I ATTACH A PICTURE TO AN EMAIL I CLICK OPEN THE ATTACHMENT TO CHECK THAT I HAVE THE RIGHT PICTURE, WHEN I SEE LINES AND POINTS IS NO OPEN PHOTO

  I HAVE NOW SOLVED THE PROBLEM, I CHANGED THE PHOTO TO OPEN WITH WINDOWS PICTURE AND FAX VIEWER.

• How can I change text size and point via the command prompt?

  I want to create a script that will allow me to easily change to or from my TV to my monitor. I know how to change the display, but I don't know how I can change the size of text and point via the command prompt (that is, from 100% to 150%). Does anyone know how?

  Unfortunately, you can not.  In addition, change the DPI requires reboot (or logout and back).  But you can apply a different theme, that you can call from the command just by opening the .themepack file.  Since themes can control the size of some elements of the police who might do the trick you are looking for.

• Lines and points on screen

  It seems that I still have a problem after another, recently I noticed the lines and points on my screen, I noticed this problem more on gradients.
  Here is a picture of example of what I'm talking about:
  
  The image is the background in my Steam client (it is not only case to steam), notice the points a little above the middle of the image and the horizontal lines.

  My monitor is a BenQ E2420HD connected by HDMI, I use a Nvidia GTX 580 with the latest drivers installed, I tried to reinstall my graphics drivers, but it made no difference.

  Thank you

  Hi Daniel,.

  Method 1:
  I suggest you to check if the problem occurs on an external monitor. If the problem occurs, the external monitor, it could be a problem with the monitor.

  Method 2:
  If the problem does not occur on an external monitor, I suggest you try the procedure described in the article and see if it helps.

  Note: Applies to Windows 7.

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Check out the link for more information.

  Get the best display on your monitor
  http://Windows.Microsoft.com/en-in/Windows/getting-best-display-monitor#getting-best-display-monitor=Windows-7

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• How devil my touchpad - done before, but if the work done on the laptop that allowed him. When I go into devices and mouse and pointer Manager I can't find touchpad

  How devil my touchpad - done before, but if the work done on the laptop that allowed him.  When I go to devices and mouse and pointer Manager

  Hello AndreauLuty,

  It will be different depending on the manufacturer of the computer that you have. Go to the control panel and go to the mouse option. On some computers, there is a tab for the Touchpad and you can turn it off from there.

  See the thread below the TechNet that describes how to disable the touchpad.
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/a2c8b891-09a0-4F0A-9419-c21190fff642

  I hope this helps.

  Marilyn

• My PDF now appear like MS Edge.  I tried to reinstall AR A-Reader and pointing to my PDF.  Dialog says that he cannot do

  My PDF now appear like MS Edge.  I tried to reinstall AR A-Reader and pointing to my PDF.  Dialog says that he cannot do

  How can I get held hostage on this and go back to Adobe Reader?  This happened only recently, I put in 10 MS several months ago.

  Hi John,.

  Please try this fix: Reader/Acrobat is not the default PDF owner | Windows 10 threshold 2

  Thank you

  Abhishek

• Can someone please take a look at and point out the flaws in the chosen components.

  I'll buy components for the creation of 2 new machines to vsphere installation 5. The configurations of these are the following:
  Computer1:
  Core i5 2500
  ASUS P8H67-M PRO H67
  G.Skill Ripjaws - memory - 8 GB: 2 x 4 GB DIMM 240-pin - DDR3 - 1333 MHz
  2 TB WD SATA western digital Caviar Green
  Cooler Master Elite 370
  Corsair CMPSU - 600GS Gaming Series power supply SMPS 600W
  Samsung 22 X DVDRW desktop DVD writer internal
  Computer2:
  Core i7 2600
  ASUS Z68 P8Z68-V PRO
  G.Skill Ripjaws - memory - 8 GB: 2 x 4 GB DIMM 240-pin - DDR3 - 1333 MHz
  Seagate 1 TB Barracuda 7200.12 SATA 3 Gb/s
  Cooler Master Elite 430
  Corsair CMPSU - 600GS Gaming Series power supply SMPS 600W
  Both machines will be used for my study of vmware whitebox.
  Can someone please take a look at and point out the flaws in the chosen components.

  Please go through the link below

  http://www.VMware.com/resources/compatibility/search.php

  http://www.VMware.com/support/vsphere5/doc/vSphere-ESX-vCenter-Server-50-release-notes.html#beforeyoubegin

  Yours,

  Satya

• crossing polygon and point as parameters

  Hi all
  
  I'm new on this excuse, so please, if this is a stupid question - but I need to write a function in Oracle, mySQL and SQLserver called via java to determine whether a given point is inside the specified polygon.
  The call will be as follows in all databases:
  
  SELECT point_in_polygon ('(6|2) ','(5|1) |(8| 1) |) (8: 6). (5: 7). (5|1)') = 1;
  
  
  I have remove polygon and point settings above in my service and had hoped to make the select statement in Oracle to determine whether the point is inside the polygon:
  
  Select 1 of the DOUBLE
  where
  SDO_RELATE (SDO_GEOMETRY ('POINT (6-2)'),
  SDO_GEOMETRY (' POLYGON ((5.0 1.0, 8.0 1.0, 8,0 6,0, 5,0 7,0, 5,0 1.0)) ").
  + "(masque = anyinteract querytype = fenêtre ') = 'TRUE';" +
  
  or something similar - but I get the error there is no spatial index:
  
  ERROR on line 1:
  ORA-13226: interface not supported without a spatial index
  ORA-06512: at the 'MDSYS. MD", line 1723
  ORA-06512: at the 'MDSYS. MDERR", line 8
  ORA-06512: at the 'MDSYS. SDO_3GL', line 62
  
  As I wanted to avoid the insertion of data in a table - I had hoped to make the comparison between the point and the polygon settings.
  Someone can let me know if this is possible, or do I read my settings, insert into a column of type geometry in a table, create the spatial index, and then make the comparison?
  
  Thanks in advance for your expertise.

  Hello
  You must use the function space sdo_geom.relate rather than the operator space sdo_relate, which requires the spatial index.
  In your WKT constructor you must also pass a SRID (NULL values are used in the following example)

  select 1 from dual  where sdo_geom.RELATE(SDO_GEOMETRY('POLYGON ((5.0 1.0, 8.0 1.0, 8.0 6.0, 5.0 7.0, 5.0 1.0))',null),'anyinteract',SDO_GEOMETRY('POINT(6 2)',null),0.001)  = 'TRUE';
  

  Jack

• ListView and ListItem displaying funny

  How is it when I have my. XML directly in my ListView, all list items display correctly, but if I add data to a data source, it is not.

  Example below because I can't explain it very well.

  ListView {
              dataModel: XmlDataModel {
                  source: "hills.xml"
              }
              listItemComponents: [
                  ListItemComponent {
                      type: "listItem"
                      StandardListItem {
                          title: ListItemData.skiHill
                      }
                  },
                  ListItemComponent {
                      type: "header"
                      Header {
                          title: ListItemData.key
                          touchPropagationMode: TouchPropagationMode.None
                      }
                  }
  

  Vs.

  ListView {
              dataModel: dataModel
              listItemComponents: [
                  ListItemComponent {
                      type: "listItem"
                      StandardListItem {
                          title: ListItemData.skiHill
                      }
                  },
                  ListItemComponent {
                      type: "header"
                      Header {
                          title: ListItemData.key
                          touchPropagationMode: TouchPropagationMode.None
                      }
                  }
  
  ...
  
  attachedObjects: [
          GroupDataModel {
              id: dataModel
              sortingKeys: [
                  "skiHill"
              ]
          },
          DataSource {
              id: dataSource
              source: "hills.xml"
              query: "/root/listItem"
              onDataLoaded: {
                  dataModel.insertList(data);
              }
          }
  

  On the 2nd day of two different types of lists, the list item displays the news from another part of my XML, not the name of ski hill.

  Your head should look like:

   ListItemComponent {
                      type: "header"
                      Header {
                          title: ListItemData
                          touchPropagationMode: TouchPropagationMode.None
                      }
                  }
  

  i.e. just use ListItemData for the title - because since a GroupDataModel (and probably XmlDataModel) the first level of the row is always returned as a string, not as a piece of real data that has properties

  ListItemComponent {
                      type: "item"
                      StandardListItem {
                          title: ListItemData.skiHill
                      }
                  },
  

  Your list items must have the type 'point' - because that's what indicates the GroupDataModel.

  You can substitute by using a reminder in QML itemType(), if you need something different, or if you need a mixture of different types in the list

• Hotmail no longer works. I can open mail on yahoo, MSN premium, IE9, chrome, but firefox doesn't work anymore? I reinstalled the two and point of restoration, still broken?

  When I open the Fire Fox, click Hotmail, it opens the page with the open.cannot of the Inbox folder, click on anything? Cannot open the mail, or all records thereon, the cursor turns into a finger, but nothing opens or closes in all? reinstalled evrything, made a restore point. It works on all browsers, but firefox? use fire fox for years?

  I found the problem. It's the ad block plus 2.0. I just noticed that I was disabling each of them was. I noticed in Firefox that the envelopes have disappeared! That's why the post did not open, so in safe mode with disabled modules returned envelopes. then I restarted in reg mode and then turned off one-by-one. It was the adBlock Plus 2.0. Thank you for your advice. I would have never found. Thank you!

• Synaptics Touchpad and Pointing Device Driver missing on Satellite A200?

  Hey,.

  I received a notification of upgrade on the touchpad synaptics installed on my laptop A200 - 1 m 4 and after I installed that the touchpad respond well, so I rolled back the driver, but he wouldn't use the scroll option. I reinstalled the driver again, but still I couldn't use the scroll function.

  On the icon in the taskbar, when I want to see the chart pressue accessory it gives me this msg * sorry, this program requires a Synaptics TouchPad, and the Synaptics pointing Device Driver * I miss him the 2nd can't so anyone made me know where I can find the installer for it.

  Thank you very much in advance,
  LEEN

  Hello

  Satellite A200 - 1 M 4 belongs to the series of PSAE0E and you choose this serial number for a driver download.

  On the European driver Toshiba page you will find the * Alps Electric Touch Pad driver *. (This driver allows you to set the properties and functions of mouse control) and
  the * Synaptics Touchpad driver * (this driver allows you to set the properties and the touch pad control functions).

  Both must be installed!

  If that doesn't help then try to roll back the BONE to this early time (until you've updated the driver for the first time)

  Good bye

• How to interpret the orbit and Point of reference Timebaseplot

  Hello

  the plot of the orbit and the time base includes a "red dot" called the reference point. I really didn't understand this meaning.

  Please, take a look at the photo "orbit_timbase_plot. PNG ".

  Thanks a lot for your help!

  SVX orbit and the basic plot of time (filtered) (Ch N - M orders) .vi accepts the size of entry and entry order height OATS phase and Phase (Signal the same Angle, N channels) .vi.

  If you want to extract the information from the phase of the red dot, you can just get the 2D cluster table 'phases' [lag phase].

  When "bandwidth [command]" is set to 1, and 'selection of the category axis' is set to the time, the 'phase' table in ' phases [offset] "corresponds to the phase of each red dot, the" time/rev/rpm"table in" phases [offset] "corresponds to the value of data orbit/time base reference.

• How can I do 1 d array and pointer to place an acquired image?

  How to make a 1 d table and create a pointer to the first position to put an image in?  I thought that's what I did (see picture) but continue to get an error of 1097, probably due to the incorrect memory allocation.  I have the size of the image in bytes and a string, will call a dll and am pretty sure that is not what is causing me problems.  However, the pData is supposed to be a pointer to the first element of a 1 d table which is the width in pixels * height.  I read on the website of LV table of the image I did look like a 2D array, but is actually a 1 d array and that the pixel pointer points to the first element of the array.  Is it not the case?  Thank you.